summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2013-06-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/wireless/nl80211.c
2013-06-24cfg80211: fix compilation warning for cfg80211_leave_all()Arend van Spriel
The following compilation issue popped up moving from v3.10-rc1 to v3.10-rc6 after merging wireless-testing. net/wireless/sysfs.c:86:13: error: 'cfg80211_leave_all' defined but not used [-Werror=unused-function] The function is only called when CONFIG_PM is enabled. Moving the function under CONFIG_PM as well. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-24wireless: check for dangling wdev->current_bss pointerBen Greear
If it *is* still set when the netdev is being deleted, then we are about to leak a pointer. Warn and clean up in that case. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-24wireless: add comments about bss refcountingBen Greear
Should help the next person that tries to understand the bss refcounting logic. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-24wireless: Make sure __cfg80211_connect_result always puts bssBen Greear
Otherwise, we can leak a bss reference. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/wireless/nl80211.c
2013-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19cfg80211: hold BSS over association processJohannes Berg
This fixes the potential issue that the BSS struct that we use and later assign to wdev->current_bss is removed from the scan list while associating. Also warn when we don't have a BSS struct in connect_result unless it's from a driver that only has the connect() API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-19cfg80211: require passing BSS struct back to cfg80211_assoc_timeoutJohannes Berg
Doing so will allow us to hold the BSS (not just ref it) over the association process, thus ensuring that it doesn't time out and gets invisible to the user (e.g. in 'iw wlan0 link'.) This also fixes a leak in mac80211 where it doesn't always release the BSS struct properly in all cases where calling this function. This leak was reported by Ben Greear. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-19nl80211: use small state buffer for wiphy_dumpJohannes Berg
Avoid parsing the original dump message again and again by allocating a small state struct that is used by the functions involved in the dump, storing this struct in cb->args[0]. This reduces the memory allocation size as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-19Merge remote-tracking branch 'mac80211/master' into HEADJohannes Berg
Merge mac80211 to avoid conflicts with the nl80211 attrbuf changes. Conflicts: net/mac80211/iface.c net/wireless/nl80211.c Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-19nl80211: fix attrbuf access race by allocating a separate oneJohannes Berg
Since my commit 3713b4e364 ("nl80211: allow splitting wiphy information in dumps"), nl80211_dump_wiphy() uses the global nl80211_fam.attrbuf for parsing the incoming data. This wouldn't be a problem if it only did so on the first dump iteration which is locked against other commands in generic netlink, but due to space constraints in cb->args (the needed state doesn't fit) I decided to always parse the original message. That's racy though since nl80211_fam.attrbuf could be used by some other parsing in generic netlink concurrently. For now, fix this by allocating a separate parse buffer (it's a bit too big for the stack, currently 1448 bytes on 64-bit). For -next, I'll change the code to parse into the global buffer in the first round only and then allocate a smaller buffer to keep the data in cb->args. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-18nl80211/cfg80211: add 5 and 10 MHz defines and wiphy flagSimon Wunderlich
Add defines for 5 and 10 MHz channel width and fix channel handling functions accordingly. Also check for and report the WIPHY_FLAG_SUPPORTS_5_10_MHZ capability. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [fix spelling in comment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-18nl80211: use attributes to parse beaconsSimon Wunderlich
only the attributes are required and not the whole netlink info, as the function accesses the attributes only anyway. This makes it easier to parse nested beacon IEs later. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/ath/ath9k/debug.c net/mac80211/iface.c
2013-06-11cfg80211: fix rtnl leak in wiphy dump error casesJohannes Berg
In two wiphy dump error cases, most often when the dump allocation must be increased, the RTNL is leaked. This quickly results in a complete system lockup. Release the RTNL correctly. Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-11nl80211: allow sending CMD_FRAME without specifying any frequencyAntonio Quartulli
Users may want to send a frame on the current channel without specifying it. This is particularly useful for the correct implementation of the IBSS/RSN support in wpa_supplicant which requires to receive and send AUTH frames. Make mgmt_tx pass a NULL channel to the driver if none has been specified by the user. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-11cfg80211: fix VHT TDLS peer AID verificationJouni Malinen
I (Johannes) accidentally applied the first version of the patch ("Allow TDLS peer AID to be configured for VHT"). Now apply just the changes between v1 and v2 to get the AID verification and prefer the new attribute over the old one. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-11{nl,mac,cfg}80211: Allow user to configure basic rates for meshAshok Nagarajan
Currently mesh uses mandatory rates as the default basic rates. Allow basic rates to be configured during mesh join. Basic rates are applied only if channel is also provided with mesh join command. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [some whitespace fixes, refuse basic rates w/o channel] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-11{nl,cfg}80211: make peer link expiration time configurableColleen Twitty
If a STA has a peer that it hasn't seen any tx activity from for a certain length of time, the peer link is expired. This means the inactive STA is removed from the list of peers and that STA is not considered a peer again unless it re-peers. Previously, this inactivity time was always 30 minutes. Now, add it to the mesh configuration and allow it to be configured. Retain 30 minutes as a default value. Signed-off-by: Colleen Twitty <colleen@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge 'net' bug fixes into 'net-next' as we have patches that will build on top of them. This merge commit includes a change from Emil Goode (emilgoode@gmail.com) that fixes a warning that would have been introduced by this merge. Specifically it fixes the pingv6_ops method ipv6_chk_addr() to add a "const" to the "struct net_device *dev" argument and likewise update the dummy_ipv6_chk_addr() declaration. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04cfg80211: make wiphy index start at 0 againJohannes Berg
The change to use atomic_inc_return() for assigning the wiphy index made the first wiphy index 1 instead of 0. This is fine, but we all habitually type "phy0" when we're testing, so make it go back to 0 instead of 1 by subtracting 1 from the index. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04cfg80211: fix potential deadlock regressionJohannes Berg
My big locking cleanups caused a problem by registering the rfkill instance with the RTNL held, while the callback also acquires the RTNL. This potentially causes a deadlock since the two locks used (rfkill mutex and RTNL) can be acquired in two different orders. Fix this by (un)registering rfkill without holding the RTNL. This needs to be done after the device struct is registered, but that can also be done w/o holding the RTNL. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04regulatory: use proper enum return valueJohannes Berg
get_reg_request_treatment() returns 0 in one case but is defined to return an enum, use the proper value REG_REQ_OK. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04cfg80211: separate internal SME implementationJohannes Berg
The current internal SME implementation in cfg80211 is very mixed up with the MLME handling, which has been causing issues for a long time. There are three things that the implementation has to provide: * a basic SME implementation for nl80211's connect() call (for drivers implementing auth/assoc, which is really just mac80211) and wireless extensions * MLME events for the userspace SME * SME events (connected, disconnected etc.) for all different SME implementation possibilities (driver, cfg80211 and userspace) To achieve these goals it isn't necessary to track the software SME's connection status outside of it's state (which is the part that caused many issues.) Instead, track it only in the SME data (wdev->conn) and in the general case only track whether the wdev is connected or not (via wdev->current_bss.) Also separate the internal implementation to not have callbacks from the SME events, but rather call it from the API functions that the driver (or rather mac80211) calls. This separates the code better. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04cfg80211/mac80211: clean up cfg80211 SME APIsJohannes Berg
Do some cleanups in the cfg80211 SME APIs, which are only used by mac80211. Most of these functions get a frame passed, and there isn't really any reason to export multiple functions as cfg80211 can check the frame type instead, do that. Additionally, the API functions have confusing names like cfg80211_send_...() which was meant to indicate that it sends an event to userspace, but gets a bit confusing when there's both TX and RX and they're not all clearly labeled. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04nl80211: remove bogus genlmsg_end() error checkingJohannes Berg
genlmsg_end() can't return an error since it returns the skb length so remove checks treating the return value as an error code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03cfg80211: take WoWLAN support information out of wiphy structJohannes Berg
There's no need to take up the space for devices that don't support WoWLAN, and most drivers can even make the support data static const (except where it's modified at runtime.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29cfg80211: support an active monitor interface flagFelix Fietkau
An active monitor interface is one that is used for communication (via injection). It is expected to ACK incoming unicast packets. This is useful for running various 802.11 testing utilities that associate to an AP via injection and manage the state in user space. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-28net: pass info struct via netdevice notifierJiri Pirko
So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27cfg80211: make WoWLAN configuration available to driversJohannes Berg
Make the current WoWLAN configuration available to drivers at runtime. This isn't really useful for the normal WoWLAN behaviour and accessing it can also be racy, but drivers may use it for testing the WoWLAN device behaviour while the host stays up & running to observe the device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24cfg80211: remove some locked wrappers from sme APIJohannes Berg
By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24cfg80211: remove some locked wrappers from mlme APIJohannes Berg
By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24regulatory: remove reg_mutexJohannes Berg
The reg_mutex is similar to the ones I just removed in cfg80211 but even less useful since it protects global data, and we hold the RTNL in all places (except module unload) already. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24regulatory: use RCU in regulatory_hint_11d()Johannes Berg
Since it just does a quick check of the last regulatory request, the function doesn't have to hold the reg mutex but can use RCU instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24cfg80211: simplify and correct P2P-Device scan checkJohannes Berg
If the driver for some reason successfully finishes scanning while in p2p_stop_device(), cfg80211 will still set it to aborted. Simplify this code using the new 'notified' value and only mark it aborted in case the driver didn't notify cfg80211 at all (in which case we also leak the request to not crash, this is a driver bug.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24cfg80211/mac80211: use cfg80211 wdev mutex in mac80211Johannes Berg
Using separate locks in cfg80211 and mac80211 has always caused issues, for example having to unlock in places in mac80211 to call cfg80211, which even needed a framework to make cfg80211 calls after some functions returned etc. Additionally, I suspect some issues people have reported with the cfg80211 state getting confused could be due to such issues, when cfg80211 is asking mac80211 to change state but mac80211 is in the process of telling cfg80211 that the state changed (in another way.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24cfg80211: vastly simplify lockingJohannes Berg
Virtually all code paths in cfg80211 already (need to) hold the RTNL. As such, there's little point in having another four mutexes for various parts of the code, they just cause lock ordering issues (and much of the time, the RTNL and a few of the others need thus be held.) Simplify all this by getting rid of the extra four mutexes and just use the RTNL throughout. Only a few code changes were needed to do this and we can get rid of a work struct for bonus points. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24cfg80211: use atomic_t for wiphy counterJohannes Berg
There's no need to lock, we can just use an atomic_t. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24cfg80211: move cfg80211_get_dev_from_ifindex under wextJohannes Berg
The function is only used and needed by the wext code for scanning, so move it there. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24Merge remote-tracking branch 'mac80211/master' into mac80211-nextJohannes Berg
2013-05-24{cfg,mac}80211: move mandatory rates calculation to cfg80211Ashok Nagarajan
Move mandatory rates calculation to cfg80211, shared with non mac80211 drivers. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [extend documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24cfg80211: Allow TDLS peer AID to be configured for VHTJouni Malinen
VHT uses peer AID in the PARTIAL_AID field in TDLS frames. The current design for TDLS is to first add a dummy STA entry before completing TDLS Setup and then update information on this STA entry based on what was received from the peer during the setup exchange. In theory, this could use NL80211_ATTR_STA_AID to set the peer AID just like this is used in AP mode to set the AID of an association station. However, existing cfg80211 validation rules prevent this attribute from being used with set_station operation. To avoid interoperability issues between different kernel and user space version combinations, introduce a new nl80211 attribute for the purpose of setting TDLS peer AID. This attribute can be used in both the new_station and set_station operations. It is not supposed to be allowed to change the AID value during the lifetime of the STA entry, but that validation is left for drivers to do in the change_station callback. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-23cfg80211: fix reporting 64-bit station info tx bytesFelix Fietkau
Copy & paste mistake - STATION_INFO_TX_BYTES64 is the name of the flag, not NL80211_STA_INFO_TX_BYTES64. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-23cfg80211: check wdev->netdev in connection workJohannes Berg
If a P2P-Device is present and another virtual interface triggers the connection work, the system crash because it tries to check if the P2P-Device's netdev (which doesn't exist) is up. Skip any wdevs that have no netdev to fix this. Cc: stable@vger.kernel.org Reported-by: YanBo <dreamfly281@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16cfg80211: Userspace may inform kernel of mesh auth method.Colleen Twitty
Authentication takes place in userspace, but the beacon is generated in the kernel. Allow userspace to inform the kernel of the authentication method so the appropriate mesh config IE can be set prior to beacon generation when joining the MBSS. Signed-off-by: Colleen Twitty <colleen@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16cfg80211: use C99 initialisers to simplify code a bitJohannes Berg
Use C99 initialisers for the auth, deauth and disassoc requests to simplify the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16nl80211: Add generic netlink module alias for cfg80211/nl80211Marcel Holtmann
To support auto-loading of wireless modules from netlink users, add module alias for nl80211 family. This also adds NL80211_GENL_NAME constant to define the "nl80211" netlink family name as part of uapi. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16cfg80211: add 60GHz regulatory classVladimir Kondratiev
Add regulatory class for 60GHz band, according to the last specification. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16cfg80211: add support for per-chain signal strength reportingFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>