Age | Commit message (Collapse) | Author |
|
|
|
raise_softirq_irqoff() disables interrupts and wakes the softirq
daemon, but after reenabling interrupts there is no preemption check,
so the execution of the softirq thread might be delayed arbitrarily.
In principle we could add that check to local_irq_enable/restore, but
that's overkill as the rasie_softirq_irqoff() sections are the only
ones which show this behaviour.
Reported-by: Carsten Emde <cbe@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
On RT write_seqcount_begin() disables preemption and device_rename()
allocates memory with GFP_KERNEL and grabs later the sysfs_mutex
mutex. Serialize with a mutex and add use the non preemption disabling
__write_seqcount_begin().
To avoid writer starvation, let the reader grab the mutex and release
it when it detects a writer in progress. This keeps the normal case
(no reader on the fly) fast.
[ tglx: Instead of replacing the seqcount by a mutex, add the mutex ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This code triggers the new WARN in __raise_softirq_irqsoff() though it
actually looks at the softirq pending bit and calls into the softirq
code, but that fits not well with the context related softirq model of
RT. It's correct on mainline though, but going through
local_bh_disable/enable here is not going to hurt badly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The netfilter code relies only on the implicit semantics of
local_bh_disable() for serializing wt_write_recseq sections. RT breaks
that and needs explicit serialization here.
Reported-by: Peter LaDow <petela@gocougs.wsu.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
in response to the oops in ip_output.c:ip_send_unicast_reply under high
network load with CONFIG_PREEMPT_RT_FULL=y, reported by Sami Pietikainen
<Sami.Pietikainen@wapice.com>, this patch adds local serialization in
ip_send_unicast_reply.
from ip_output.c:
/*
* Generic function to send a packet as reply to another packet.
* Used to send some TCP resets/acks so far.
*
* Use a fake percpu inet socket to avoid false sharing and contention.
*/
static DEFINE_PER_CPU(struct inet_sock, unicast_sock) = {
...
which was added in commit be9f4a44 in linux-stable. The git log, wich
introduced the PER_CPU unicast_sock, states:
<snip>
commit be9f4a44e7d41cee50ddb5f038fc2391cbbb4046
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Jul 19 07:34:03 2012 +0000
ipv4: tcp: remove per net tcp_sock
tcp_v4_send_reset() and tcp_v4_send_ack() use a single socket
per network namespace.
This leads to bad behavior on multiqueue NICS, because many cpus
contend for the socket lock and once socket lock is acquired, extra
false sharing on various socket fields slow down the operations.
To better resist to attacks, we use a percpu socket. Each cpu can
run without contention, using appropriate memory (local node)
<snip>
The per-cpu here thus is assuming exclusivity serializing per cpu - so
the use of get_cpu_ligh introduced in
net-use-cpu-light-in-ip-send-unicast-reply.patch, which droped the
preempt_disable in favor of a migrate_disable is probably wrong as this
only handles the referencial consistency but not the serialization. To
evade a preempt_disable here a local lock would be needed.
Therapie:
* add local lock:
* and re-introduce local serialization:
Tested on x86 with high network load using the testcase from Sami Pietikainen
while : ; do wget -O - ftp://LOCAL_SERVER/empty_file > /dev/null 2>&1; done
Link: http://www.spinics.net/lists/linux-rt-users/msg11007.html
Cc: stable-rt@vger.kernel.org
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Replace it by a local lock. Though that's pretty inefficient :(
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
1)enqueue_to_backlog() (called from netif_rx) should be
bind to a particluar CPU. This can be achieved by
disabling migration. No need to disable preemption
2)Fixes crash "BUG: scheduling while atomic: ksoftirqd"
in case of RT.
If preemption is disabled, enqueue_to_backog() is called
in atomic context. And if backlog exceeds its count,
kfree_skb() is called. But in RT, kfree_skb() might
gets scheduled out, so it expects non atomic context.
3)When CONFIG_PREEMPT_RT_FULL is not defined,
migrate_enable(), migrate_disable() maps to
preempt_enable() and preempt_disable(), so no
change in functionality in case of non-RT.
-Replace preempt_enable(), preempt_disable() with
migrate_enable(), migrate_disable() respectively
-Replace get_cpu(), put_cpu() with get_cpu_light(),
put_cpu_light() respectively
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: Rajan Srivastava <Rajan.Srivastava@freescale.com>
Cc: <rostedt@goodmis.orgn>
Link: http://lkml.kernel.org/r/1337227511-2271-1-git-send-email-Priyanka.Jain@freescale.com
Cc: stable-rt@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
There are (probably rare) situations when a system crashed and the system
console becomes unresponsive but the network icmp layer still is alive.
Wouldn't it be wonderful, if we then could submit a sysreq command via ping?
This patch provides this facility. Please consult the updated documentation
Documentation/sysrq.txt for details.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
|
|
qdisc_lock is taken w/o disabling interrupts or bottom halfs. So code
holding a qdisc_lock() can be interrupted and softirqs can run on the
return of interrupt in !RT.
The spin_trylock() in net_tx_action() makes sure, that the softirq
does not deadlock. When the lock can't be acquired q is requeued and
the NET_TX softirq is raised. That causes the softirq to run over and
over.
That works in mainline as do_softirq() has a retry loop limit and
leaves the softirq processing in the interrupt return path and
schedules ksoftirqd. The task which holds qdisc_lock cannot be
preempted, so the lock is released and either ksoftirqd or the next
softirq in the return from interrupt path can proceed. Though it's a
bit strange to actually run MAX_SOFTIRQ_RESTART (10) loops before it
decides to bail out even if it's clear in the first iteration :)
On RT all softirq processing is done in a FIFO thread and we don't
have a loop limit, so ksoftirqd preempts the lock holder forever and
unqueues and requeues until the reset button is hit.
Due to the forced threading of ksoftirqd on RT we actually cannot
deadlock on qdisc_lock because it's a "sleeping lock". So it's safe to
replace the spin_trylock() with a spin_lock(). When contended,
ksoftirqd is scheduled out and the lock holder can proceed.
[ tglx: Massaged changelog and code comments ]
Solved-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Carsten Emde <cbe@osadl.org>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Claudio R. Goncalves <lclaudio@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Retry loops on RT might loop forever when the modifying side was
preempted. Use cpu_chill() instead of cpu_relax() to let the system
make progress.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
for outstanding qdisc_run calls
On PREEMPT_RT enabled systems the interrupt handler run as threads at prio 50
(by default). If a high priority userspace process tries to shut down a busy
network interface it might spin in a yield loop waiting for the device to
become idle. With the interrupt thread having a lower priority than the
looping process it might never be scheduled and so result in a deadlock on UP
systems.
With Magic SysRq the following backtrace can be produced:
> test_app R running 0 174 168 0x00000000
> [<c02c7070>] (__schedule+0x220/0x3fc) from [<c02c7870>] (preempt_schedule_irq+0x48/0x80)
> [<c02c7870>] (preempt_schedule_irq+0x48/0x80) from [<c0008fa8>] (svc_preempt+0x8/0x20)
> [<c0008fa8>] (svc_preempt+0x8/0x20) from [<c001a984>] (local_bh_enable+0x18/0x88)
> [<c001a984>] (local_bh_enable+0x18/0x88) from [<c025316c>] (dev_deactivate_many+0x220/0x264)
> [<c025316c>] (dev_deactivate_many+0x220/0x264) from [<c023be04>] (__dev_close_many+0x64/0xd4)
> [<c023be04>] (__dev_close_many+0x64/0xd4) from [<c023be9c>] (__dev_close+0x28/0x3c)
> [<c023be9c>] (__dev_close+0x28/0x3c) from [<c023f7f0>] (__dev_change_flags+0x88/0x130)
> [<c023f7f0>] (__dev_change_flags+0x88/0x130) from [<c023f904>] (dev_change_flags+0x10/0x48)
> [<c023f904>] (dev_change_flags+0x10/0x48) from [<c024c140>] (do_setlink+0x370/0x7ec)
> [<c024c140>] (do_setlink+0x370/0x7ec) from [<c024d2f0>] (rtnl_newlink+0x2b4/0x450)
> [<c024d2f0>] (rtnl_newlink+0x2b4/0x450) from [<c024cfa0>] (rtnetlink_rcv_msg+0x158/0x1f4)
> [<c024cfa0>] (rtnetlink_rcv_msg+0x158/0x1f4) from [<c0256740>] (netlink_rcv_skb+0xac/0xc0)
> [<c0256740>] (netlink_rcv_skb+0xac/0xc0) from [<c024bbd8>] (rtnetlink_rcv+0x18/0x24)
> [<c024bbd8>] (rtnetlink_rcv+0x18/0x24) from [<c02561b8>] (netlink_unicast+0x13c/0x198)
> [<c02561b8>] (netlink_unicast+0x13c/0x198) from [<c025651c>] (netlink_sendmsg+0x264/0x2e0)
> [<c025651c>] (netlink_sendmsg+0x264/0x2e0) from [<c022af98>] (sock_sendmsg+0x78/0x98)
> [<c022af98>] (sock_sendmsg+0x78/0x98) from [<c022bb50>] (___sys_sendmsg.part.25+0x268/0x278)
> [<c022bb50>] (___sys_sendmsg.part.25+0x268/0x278) from [<c022cf08>] (__sys_sendmsg+0x48/0x78)
> [<c022cf08>] (__sys_sendmsg+0x48/0x78) from [<c0009320>] (ret_fast_syscall+0x0/0x2c)
This patch works around the problem by replacing yield() by msleep(1), giving
the interrupt thread time to finish, similar to other changes contained in the
rt patch set. Using wait_for_completion() instead would probably be a better
solution.
Cc: stable-rt@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
=======================================================
[ INFO: possible circular locking dependency detected ]
3.0.0-rc3+ #26
-------------------------------------------------------
ip/1104 is trying to acquire lock:
(local_softirq_lock){+.+...}, at: [<ffffffff81056d12>] __local_lock+0x25/0x68
but task is already holding lock:
(sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_INET){+.+...}:
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff813e2781>] lock_sock_nested+0x82/0x92
[<ffffffff81433308>] lock_sock+0x10/0x12
[<ffffffff81433afa>] tcp_close+0x1b/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
-> #0 (local_softirq_lock){+.+...}:
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
lock(sk_lock-AF_INET);
lock(local_softirq_lock);
*** DEADLOCK ***
1 lock held by ip/1104:
#0: (sk_lock-AF_INET){+.+...}, at: [<ffffffff81433308>] lock_sock+0x10/0x12
stack backtrace:
Pid: 1104, comm: ip Not tainted 3.0.0-rc3+ #26
Call Trace:
[<ffffffff81081649>] print_circular_bug+0x1f8/0x209
[<ffffffff81082ecc>] __lock_acquire+0xacc/0xdc8
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff810836e5>] lock_acquire+0x103/0x12e
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c75>] ? get_parent_ip+0x11/0x41
[<ffffffff814a7e40>] _raw_spin_lock+0x3b/0x4a
[<ffffffff81056d12>] ? __local_lock+0x25/0x68
[<ffffffff81046c8c>] ? get_parent_ip+0x28/0x41
[<ffffffff81056d12>] __local_lock+0x25/0x68
[<ffffffff81056d8b>] local_bh_disable+0x36/0x3b
[<ffffffff81433308>] ? lock_sock+0x10/0x12
[<ffffffff814a7fc4>] _raw_write_lock_bh+0x16/0x4f
[<ffffffff81433c38>] tcp_close+0x159/0x355
[<ffffffff81453c99>] inet_release+0xc3/0xcd
[<ffffffff813dff3f>] sock_release+0x1f/0x74
[<ffffffff813dffbb>] sock_close+0x27/0x2b
[<ffffffff81129c63>] fput+0x11d/0x1e3
[<ffffffff81126577>] filp_close+0x70/0x7b
[<ffffffff8112667a>] sys_close+0xf8/0x13d
[<ffffffff814ae882>] system_call_fastpath+0x16/0x1b
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
commit 0a13404dd3bf4ea870e3d96270b5a382edca85c0 upstream.
The unix socket code is using the result of csum_partial to
hash into a lookup table:
unix_hash_fold(csum_partial(sunaddr, len, 0));
csum_partial is only guaranteed to produce something that can be
folded into a checksum, as its prototype explains:
* returns a 32-bit number suitable for feeding into itself
* or csum_tcpudp_magic
The 32bit value should not be used directly.
Depending on the alignment, the ppc64 csum_partial will return
different 32bit partial checksums that will fold into the same
16bit checksum.
This difference causes the following testcase (courtesy of
Gustavo) to sometimes fail:
#include <sys/socket.h>
#include <stdio.h>
int main()
{
int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);
int i = 1;
setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4);
struct sockaddr addr;
addr.sa_family = AF_LOCAL;
bind(fd, &addr, 2);
listen(fd, 128);
struct sockaddr_storage ss;
socklen_t sslen = (socklen_t)sizeof(ss);
getsockname(fd, (struct sockaddr*)&ss, &sslen);
fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);
if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){
perror(NULL);
return 1;
}
printf("OK\n");
return 0;
}
As suggested by davem, fix this by using csum_fold to fold the
partial 32bit checksum into a 16bit checksum before using it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 864a6040f395464003af8dd0d8ca86fed19866d4 upstream.
Avoid leaking data by sending uninitialized memory and setting an
invalid (non-zero) fragment number (the sequence number is ignored
anyway) by setting the seq_ctrl field to zero.
Fixes: 3f52b7e328c5 ("mac80211: mesh power save basics")
Fixes: ce662b44ce22 ("mac80211: send (QoS) Null if no buffered frames")
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit cb664981607a6b5b3d670ad57bbda893b2528d96 upstream.
When a VHT network uses 20 or 40 MHz as per the HT operation
information, the channel center frequency segment 0 field in
the VHT operation information is reserved, so ignore it.
This fixes association with such networks when the AP puts 0
into the field, previously we'd disconnect due to an invalid
channel with the message
wlan0: AP VHT information is invalid, disable VHT
Fixes: f2d9d270c15ae ("mac80211: support VHT association")
Reported-by: Tim Nelson <tim.l.nelson@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 963a1852fbac4f75a2d938fa2e734ef1e6d4c044 upstream.
The MLME code in mac80211 must track whether or not the AP changed
bandwidth, but if there's no change while tracking it shouldn't do
anything, otherwise regulatory updates can make it impossible to
connect to certain APs if the regulatory database doesn't match the
information from the AP. See the precise scenario described in the
code.
This still leaves some possible problems with CSA or if the AP
actually changed bandwidth, but those cases are less common and
won't completely prevent using it.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=70881
Reported-and-tested-by: Nate Carlson <kernel@natecarlson.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 1d147bfa64293b2723c4fec50922168658e613ba upstream.
There is a race between the TX path and the STA wakeup: while
a station is sleeping, mac80211 buffers frames until it wakes
up, then the frames are transmitted. However, the RX and TX
path are concurrent, so the packet indicating wakeup can be
processed while a packet is being transmitted.
This can lead to a situation where the buffered frames list
is emptied on the one side, while a frame is being added on
the other side, as the station is still seen as sleeping in
the TX path.
As a result, the newly added frame will not be send anytime
soon. It might be sent much later (and out of order) when the
station goes to sleep and wakes up the next time.
Additionally, it can lead to the crash below.
Fix all this by synchronising both paths with a new lock.
Both path are not fastpath since they handle PS situations.
In a later patch we'll remove the extra skb queue locks to
reduce locking overhead.
BUG: unable to handle kernel
NULL pointer dereference at 000000b0
IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
*pde = 00000000
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1
EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000
ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000)
iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9
Stack:
e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0
ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210
ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002
Call Trace:
[<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211]
[<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211]
[<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211]
[<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211]
[<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211]
[<c149ef70>] dev_hard_start_xmit+0x450/0x950
[<c14b9aa9>] sch_direct_xmit+0xa9/0x250
[<c14b9c9b>] __qdisc_run+0x4b/0x150
[<c149f732>] dev_queue_xmit+0x2c2/0xca0
Reported-by: Yaara Rozenblum <yaara.rozenblum@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
[reword commit log, use a separate lock]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 1bf4bbb4024dcdab5e57634dd8ae1072d42a53ac upstream.
Improves reliability of wifi connections with WPA, since authentication
frames are prioritized over normal traffic and also typically exempt
from aggregation.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 086293542b991fb88a2e41ae7b4f82ac65a20e1a upstream.
Halve mss table size to make blind cookie guessing more difficult.
This is sad since the tables were already small, but there
is little alternative except perhaps adding more precise mss information
in the tcp timestamp. Timestamps are unfortunately not ubiquitous.
Guessing all possible cookie values still has 8-in 2**32 chance.
Reported-by: Jakob Lell <jakob@jakoblell.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 8c27bd75f04fb9cb70c69c3cfe24f4e6d8e15906 upstream.
We currently accept cookies that were created less than 4 minutes ago
(ie, cookies with counter delta 0-3). Combined with the 8 mss table
values, this yields 32 possible values (out of 2**32) that will be valid.
Reducing the lifetime to < 2 minutes halves the guessing chance while
still providing a large enough period.
While at it, get rid of jiffies value -- they overflow too quickly on
32 bit platforms.
getnstimeofday is used to create a counter that increments every 64s.
perf shows getnstimeofday cost is negible compared to sha_transform;
normal tcp initial sequence number generation uses getnstimeofday, too.
Reported-by: Jakob Lell <jakob@jakoblell.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 12e3594698f6c3ab6ebacc79f2fb2ad2bb5952b5 upstream.
In ipcomp_compress(), sortirq is enabled too early, allowing the
per-cpu scratch buffer to be rewritten by ipcomp_decompress()
(called on the same CPU in softirq context) between populating
the buffer and copying the compressed data to the skb.
v2: as pointed out by Steffen Klassert, if we also move the
local_bh_disable() before reading the per-cpu pointers, we can
get rid of get_cpu()/put_cpu().
v3: removed ipcomp_decompress part (as explained by Herbert Xu,
it cannot be called from process context), get rid of cpu
variable (thanks to Eric Dumazet)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit ec0223ec48a90cb605244b45f7c62de856403729 ]
RFC4895 introduced AUTH chunks for SCTP; during the SCTP
handshake RANDOM; CHUNKS; HMAC-ALGO are negotiated (CHUNKS
being optional though):
---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
<------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
-------------------- COOKIE-ECHO -------------------->
<-------------------- COOKIE-ACK ---------------------
A special case is when an endpoint requires COOKIE-ECHO
chunks to be authenticated:
---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
<------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
------------------ AUTH; COOKIE-ECHO ---------------->
<-------------------- COOKIE-ACK ---------------------
RFC4895, section 6.3. Receiving Authenticated Chunks says:
The receiver MUST use the HMAC algorithm indicated in
the HMAC Identifier field. If this algorithm was not
specified by the receiver in the HMAC-ALGO parameter in
the INIT or INIT-ACK chunk during association setup, the
AUTH chunk and all the chunks after it MUST be discarded
and an ERROR chunk SHOULD be sent with the error cause
defined in Section 4.1. [...] If no endpoint pair shared
key has been configured for that Shared Key Identifier,
all authenticated chunks MUST be silently discarded. [...]
When an endpoint requires COOKIE-ECHO chunks to be
authenticated, some special procedures have to be followed
because the reception of a COOKIE-ECHO chunk might result
in the creation of an SCTP association. If a packet arrives
containing an AUTH chunk as a first chunk, a COOKIE-ECHO
chunk as the second chunk, and possibly more chunks after
them, and the receiver does not have an STCB for that
packet, then authentication is based on the contents of
the COOKIE-ECHO chunk. In this situation, the receiver MUST
authenticate the chunks in the packet by using the RANDOM
parameters, CHUNKS parameters and HMAC_ALGO parameters
obtained from the COOKIE-ECHO chunk, and possibly a local
shared secret as inputs to the authentication procedure
specified in Section 6.3. If authentication fails, then
the packet is discarded. If the authentication is successful,
the COOKIE-ECHO and all the chunks after the COOKIE-ECHO
MUST be processed. If the receiver has an STCB, it MUST
process the AUTH chunk as described above using the STCB
from the existing association to authenticate the
COOKIE-ECHO chunk and all the chunks after it. [...]
Commit bbd0d59809f9 introduced the possibility to receive
and verification of AUTH chunk, including the edge case for
authenticated COOKIE-ECHO. On reception of COOKIE-ECHO,
the function sctp_sf_do_5_1D_ce() handles processing,
unpacks and creates a new association if it passed sanity
checks and also tests for authentication chunks being
present. After a new association has been processed, it
invokes sctp_process_init() on the new association and
walks through the parameter list it received from the INIT
chunk. It checks SCTP_PARAM_RANDOM, SCTP_PARAM_HMAC_ALGO
and SCTP_PARAM_CHUNKS, and copies them into asoc->peer
meta data (peer_random, peer_hmacs, peer_chunks) in case
sysctl -w net.sctp.auth_enable=1 is set. If in INIT's
SCTP_PARAM_SUPPORTED_EXT parameter SCTP_CID_AUTH is set,
peer_random != NULL and peer_hmacs != NULL the peer is to be
assumed asoc->peer.auth_capable=1, in any other case
asoc->peer.auth_capable=0.
Now, if in sctp_sf_do_5_1D_ce() chunk->auth_chunk is
available, we set up a fake auth chunk and pass that on to
sctp_sf_authenticate(), which at latest in
sctp_auth_calculate_hmac() reliably dereferences a NULL pointer
at position 0..0008 when setting up the crypto key in
crypto_hash_setkey() by using asoc->asoc_shared_key that is
NULL as condition key_id == asoc->active_key_id is true if
the AUTH chunk was injected correctly from remote. This
happens no matter what net.sctp.auth_enable sysctl says.
The fix is to check for net->sctp.auth_enable and for
asoc->peer.auth_capable before doing any operations like
sctp_sf_authenticate() as no key is activated in
sctp_auth_asoc_init_active_key() for each case.
Now as RFC4895 section 6.3 states that if the used HMAC-ALGO
passed from the INIT chunk was not used in the AUTH chunk, we
SHOULD send an error; however in this case it would be better
to just silently discard such a maliciously prepared handshake
as we didn't even receive a parameter at all. Also, as our
endpoint has no shared key configured, section 6.3 says that
MUST silently discard, which we are doing from now onwards.
Before calling sctp_sf_pdiscard(), we need not only to free
the association, but also the chunk->auth_chunk skb, as
commit bbd0d59809f9 created a skb clone in that case.
I have tested this locally by using netfilter's nfqueue and
re-injecting packets into the local stack after maliciously
modifying the INIT chunk (removing RANDOM; HMAC-ALGO param)
and the SCTP packet containing the COOKIE_ECHO (injecting
AUTH chunk before COOKIE_ECHO). Fixed with this patch applied.
Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <yasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 10ddceb22bab11dab10ba645c7df2e4a8e7a5db5 ]
when ip_tunnel process multicast packets, it may check if the packet is looped
back packet though 'rt_is_output_route(skb_rtable(skb))' in ip_tunnel_rcv(),
but before that , skb->_skb_refdst has been dropped in iptunnel_pull_header(),
so which leads to a panic.
fix the bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit accfe0e356327da5bd53da8852b93fc22de9b5fc ]
The commit 9195bb8e381d81d5a315f911904cdf0cfcc919b8 ("ipv6: improve
ipv6_find_hdr() to skip empty routing headers") broke ipv6_find_hdr().
When a target is specified like IPPROTO_ICMPV6 ipv6_find_hdr()
returns -ENOENT when it's found, not the header as expected.
A part of IPVS is broken and possible also nft_exthdr_eval().
When target is -1 which it is most cases, it works.
This patch exits the do while loop if the specific header is found
so the nexthdr could be returned as expected.
Reported-by: Art -kwaak- van Breemen <ard@telegraafnet.nl>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
CC:Ansis Atteka <aatteka@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 916e4cf46d0204806c062c8c6c4d1f633852c5b6 ]
Currently we generate a new fragmentation id on UFO segmentation. It
is pretty hairy to identify the correct net namespace and dst there.
Especially tunnels use IFF_XMIT_DST_RELEASE and thus have no skb_dst
available at all.
This causes unreliable or very predictable ipv6 fragmentation id
generation while segmentation.
Luckily we already have pregenerated the ip6_frag_id in
ip6_ufo_append_data and can use it here.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit feff9ab2e7fa773b6a3965f77375fe89f7fd85cf ]
If the neigh table's entries is less than gc_thresh1, the function
will return directly, and the reachabletime will not be recompute,
so the reachabletime can be guessed.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit f5ddcbbb40aa0ba7fbfe22355d287603dbeeaaac ]
This patch fixes two bugs in fastopen :
1) The tcp_sendmsg(..., @size) argument was ignored.
Code was relying on user not fooling the kernel with iovec mismatches
2) When MTU is about 64KB, tcp_send_syn_data() attempts order-5
allocations, which are likely to fail when memory gets fragmented.
Fixes: 783237e8daf13 ("net-tcp: Fast Open client - sending SYN-data")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Tested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 93dc41bdc5c853916610576c6b48a1704959c70d upstream.
We have one report of a crash in xs_tcp_setup_socket.
The call path to the crash is:
xs_tcp_setup_socket -> inet_stream_connect -> lock_sock_nested.
The 'sock' passed to that last function is NULL.
The only way I can see this happening is a concurrent call to
xs_close:
xs_close -> xs_reset_transport -> sock_release -> inet_release
inet_release sets:
sock->sk = NULL;
inet_stream_connect calls
lock_sock(sock->sk);
which gets NULL.
All calls to xs_close are protected by XPRT_LOCKED as are most
activations of the workqueue which runs xs_tcp_setup_socket.
The exception is xs_tcp_schedule_linger_timeout.
So presumably the timeout queued by the later fires exactly when some
other code runs xs_close().
To protect against this we can move the cancel_delayed_work_sync()
call from xs_destory() to xs_close().
As xs_close is never called from the worker scheduled on
->connect_worker, this can never deadlock.
Signed-off-by: NeilBrown <neilb@suse.de>
[Trond: Make it safe to call cancel_delayed_work_sync() on AF_LOCAL sockets]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 9eb2ddb48ce3a7bd745c14a933112994647fa3cd upstream.
Fix a race in which the RPC client is shutting down while the
gss daemon is processing a downcall. If the RPC client manages to
shut down before the gss daemon is done, then the struct gss_auth
used in gss_release_msg() may have already been freed.
Link: http://lkml.kernel.org/r/1392494917.71728.YahooMailNeo@web140002.mail.bf1.yahoo.com
Reported-by: John <da_audiophile@yahoo.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 06ea0bfe6e6043cb56a78935a19f6f8ebc636226 upstream.
When a send failure occurs due to the socket being out of buffer space,
we call xs_nospace() in order to have the RPC task wait until the
socket has drained enough to make it worth while trying again.
The current patch fixes a race in which the socket is drained before
we get round to setting up the machinery in xs_nospace(), and which
is reported to cause hangs.
Link: http://lkml.kernel.org/r/20140210170315.33dfc621@notabene.brown
Fixes: a9a6b52ee1ba (SUNRPC: Don't start the retransmission timer...)
Reported-by: Neil Brown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit ed98df3361f059db42786c830ea96e2d18b8d4db ]
sock_alloc_send_pskb() & sk_page_frag_refill()
have a loop trying high order allocations to prepare
skb with low number of fragments as this increases performance.
Problem is that under memory pressure/fragmentation, this can
trigger OOM while the intent was only to try the high order
allocations, then fallback to order-0 allocations.
We had various reports from unexpected regressions.
According to David, setting __GFP_NORETRY should be fine,
as the asynchronous compaction is still enabled, and this
will prevent OOM from kicking as in :
CFSClientEventm invoked oom-killer: gfp_mask=0x42d0, order=3, oom_adj=0,
oom_score_adj=0, oom_score_badness=2 (enabled),memcg_scoring=disabled
CFSClientEventm
Call Trace:
[<ffffffff8043766c>] dump_header+0xe1/0x23e
[<ffffffff80437a02>] oom_kill_process+0x6a/0x323
[<ffffffff80438443>] out_of_memory+0x4b3/0x50d
[<ffffffff8043a4a6>] __alloc_pages_may_oom+0xa2/0xc7
[<ffffffff80236f42>] __alloc_pages_nodemask+0x1002/0x17f0
[<ffffffff8024bd23>] alloc_pages_current+0x103/0x2b0
[<ffffffff8028567f>] sk_page_frag_refill+0x8f/0x160
[<ffffffff80295fa0>] tcp_sendmsg+0x560/0xee0
[<ffffffff802a5037>] inet_sendmsg+0x67/0x100
[<ffffffff80283c9c>] __sock_sendmsg_nosec+0x6c/0x90
[<ffffffff80283e85>] sock_sendmsg+0xc5/0xf0
[<ffffffff802847b6>] __sys_sendmsg+0x136/0x430
[<ffffffff80284ec8>] sys_sendmsg+0x88/0x110
[<ffffffff80711472>] system_call_fastpath+0x16/0x1b
Out of Memory: Kill process 2856 (bash) score 9999 or sacrifice child
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit fe6cc55f3a9a053482a76f5a6b2257cee51b4663 upstream.
Marcelo Ricardo Leitner reported problems when the forwarding link path
has a lower mtu than the incoming one if the inbound interface supports GRO.
Given:
Host <mtu1500> R1 <mtu1200> R2
Host sends tcp stream which is routed via R1 and R2. R1 performs GRO.
In this case, the kernel will fail to send ICMP fragmentation needed
messages (or pkt too big for ipv6), as GSO packets currently bypass dstmtu
checks in forward path. Instead, Linux tries to send out packets exceeding
the mtu.
When locking route MTU on Host (i.e., no ipv4 DF bit set), R1 does
not fragment the packets when forwarding, and again tries to send out
packets exceeding R1-R2 link mtu.
This alters the forwarding dstmtu checks to take the individual gso
segment lengths into account.
For ipv6, we send out pkt too big error for gso if the individual
segments are too big.
For ipv4, we either send icmp fragmentation needed, or, if the DF bit
is not set, perform software segmentation and let the output path
create fragments when the packet is leaving the machine.
It is not 100% correct as the error message will contain the headers of
the GRO skb instead of the original/segmented one, but it seems to
work fine in my (limited) tests.
Eric Dumazet suggested to simply shrink mss via ->gso_size to avoid
sofware segmentation.
However it turns out that skb_segment() assumes skb nr_frags is related
to mss size so we would BUG there. I don't want to mess with it considering
Herbert and Eric disagree on what the correct behavior should be.
Hannes Frederic Sowa notes that when we would shrink gso_size
skb_segment would then also need to deal with the case where
SKB_MAX_FRAGS would be exceeded.
This uses sofware segmentation in the forward path when we hit ipv4
non-DF packets and the outgoing link mtu is too small. Its not perfect,
but given the lack of bug reports wrt. GRO fwd being broken this is a
rare case anyway. Also its not like this could not be improved later
once the dust settles.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit d206940319c41df4299db75ed56142177bb2e5f6 upstream.
Will be used by upcoming ipv4 forward path change that needs to
determine feature mask using skb->dst->dev instead of skb->dev.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit de960aa9ab4decc3304959f69533eef64d05d8e8 upstream.
This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to
skbuff core so it may be reused by upcoming ip forwarding path patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit ffd5939381c609056b33b7585fb05a77b4c695f3 ]
SCTP's sctp_connectx() abi breaks for 64bit kernels compiled with 32bit
emulation (e.g. ia32 emulation or x86_x32). Due to internal usage of
'struct sctp_getaddrs_old' which includes a struct sockaddr pointer,
sizeof(param) check will always fail in kernel as the structure in
64bit kernel space is 4bytes larger than for user binaries compiled
in 32bit mode. Thus, applications making use of sctp_connectx() won't
be able to run under such circumstances.
Introduce a compat interface in the kernel to deal with such
situations by using a 'struct compat_sctp_getaddrs_old' structure
where user data is copied into it, and then sucessively transformed
into a 'struct sctp_getaddrs_old' structure with the help of
compat_ptr(). That fixes sctp_connectx() abi without any changes
needed in user space, and lets the SCTP test suite pass when compiled
in 32bit and run on 64bit kernels.
Fixes: f9c67811ebc0 ("sctp: Fix regression introduced by new sctp_connectx api")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit a6254864c08109c66a194612585afc0439005286 ]
since commit 89aef8921bf("ipv4: Delete routing cache."), the counter
in_slow_tot can't work correctly.
The counter in_slow_tot increase by one when fib_lookup() return successfully
in ip_route_input_slow(), but actually the dst struct maybe not be created and
cached, so we can increase in_slow_tot after the dst struct is created.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit bf06200e732de613a1277984bf34d1a21c2de03d ]
Commit 46d3ceabd8d9 ("tcp: TCP Small Queues") introduced a possible
regression for applications using TCP_NODELAY.
If TCP session is throttled because of tsq, we should consult
tp->nonagle when TX completion is done and allow us to send additional
segment, especially if this segment is not a full MSS.
Otherwise this segment is sent after an RTO.
[edumazet] : Cooked the changelog, added another fix about testing
sk_wmem_alloc twice because TX completion can happen right before
setting TSQ_THROTTLED bit.
This problem is particularly visible with recent auto corking,
but might also be triggered with low tcp_limit_output_bytes
values or NIC drivers delaying TX completion by hundred of usec,
and very low rtt.
Thomas Glanzmann for example reported an iscsi regression, caused
by tcp auto corking making this bug quite visible.
Fixes: 46d3ceabd8d9 ("tcp: TCP Small Queues")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 00fe11b3c67dc670fe6391d22f1fe64e7c99a8ec ]
Currently, to make netconsole start over IPv6, the source address
needs to be specified. Without a source address, netpoll_parse_options
assumes we're setting up over IPv4 and the destination IPv6 address is
rejected.
Check if the IP version has been forced by a source address before
checking for a version mismatch when parsing the destination address.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 946c032e5a53992ea45e062ecb08670ba39b99e3 ]
ip rules with iif/oif references do not update:
(detach/attach) across interface renames.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
CC: Willem de Bruijn <willemb@google.com>
CC: Eric Dumazet <edumazet@google.com>
CC: Chris Davis <chrismd@google.com>
CC: Carlo Contavalli <ccontavalli@google.com>
Google-Bug-Id: 12936021
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 63b5f152eb4a5bb79b9caf7ec37b4201d12f6e66 ]
On m68k/ARAnyM:
WARNING: CPU: 0 PID: 407 at net/ipv4/devinet.c:1599 0x316a99()
Modules linked in:
CPU: 0 PID: 407 Comm: ifconfig Not tainted
3.13.0-atari-09263-g0c71d68014d1 #1378
Stack from 10c4fdf0:
10c4fdf0 002ffabb 000243e8 00000000 008ced6c 00024416 00316a99 0000063f
00316a99 00000009 00000000 002501b4 00316a99 0000063f c0a86117 00000080
c0a86117 00ad0c90 00250a5a 00000014 00ad0c90 00000000 00000000 00000001
00b02dd0 00356594 00000000 00356594 c0a86117 eff6c9e4 008ced6c 00000002
008ced60 0024f9b4 00250b52 00ad0c90 00000000 00000000 00252390 00ad0c90
eff6c9e4 0000004f 00000000 00000000 eff6c9e4 8000e25c eff6c9e4 80001020
Call Trace: [<000243e8>] warn_slowpath_common+0x52/0x6c
[<00024416>] warn_slowpath_null+0x14/0x1a
[<002501b4>] rtmsg_ifa+0xdc/0xf0
[<00250a5a>] __inet_insert_ifa+0xd6/0x1c2
[<0024f9b4>] inet_abc_len+0x0/0x42
[<00250b52>] inet_insert_ifa+0xc/0x12
[<00252390>] devinet_ioctl+0x2ae/0x5d6
Adding some debugging code reveals that net_fill_ifaddr() fails in
put_cacheinfo(skb, ifa->ifa_cstamp, ifa->ifa_tstamp,
preferred, valid))
nla_put complains:
lib/nlattr.c:454: skb_tailroom(skb) = 12, nla_total_size(attrlen) = 20
Apparently commit 5c766d642bcaffd0c2a5b354db2068515b3846cf ("ipv4:
introduce address lifetime") forgot to take into account the addition of
struct ifa_cacheinfo in inet_nlmsg_size(). Hence add it, like is already
done for ipv6.
Suggested-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 0ae89beb283a0db5980d1d4781c7d7be2f2810d6 ]
Self generated skbuffs in net/can/bcm.c are setting a skb->sk reference but
no explicit destructor which is enforced since Linux 3.11 with commit
376c7311bdb6 (net: add a temporary sanity check in skb_orphan()).
This patch adds some helper functions to make sure that a destructor is
properly defined when a sock reference is assigned to a CAN related skb.
To create an unshared skb owned by the original sock a common helper function
has been introduced to replace open coded functions to create CAN echo skbs.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Andre Naujoks <nautsch2@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit dbe173079ab58a444e12dbebe96f5aec1e0bed1a ]
Commit 93d8bf9fb8f3 ("bridge: cleanup netpoll code") introduced
a check in br_netpoll_enable(), but this check is incorrect for
br_netpoll_setup(). This patch moves the code after the check
into __br_netpoll_enable() and calls it in br_netpoll_setup().
For br_add_if(), the check is still needed.
Fixes: 93d8bf9fb8f3 ("bridge: cleanup netpoll code")
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Tested-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit b6f52ae2f0d32387bde2b89883e3b64d88b9bfe8 ]
The 9p-virtio transport does zero copy on things larger than 1024 bytes
in size. It accomplishes this by returning the physical addresses of
pages to the virtio-pci device. At present, the translation is usually a
bit shift.
That approach produces an invalid page address when we read/write to
vmalloc buffers, such as those used for Linux kernel modules. Any
attempt to load a Linux kernel module from 9p-virtio produces the
following stack.
[<ffffffff814878ce>] p9_virtio_zc_request+0x45e/0x510
[<ffffffff814814ed>] p9_client_zc_rpc.constprop.16+0xfd/0x4f0
[<ffffffff814839dd>] p9_client_read+0x15d/0x240
[<ffffffff811c8440>] v9fs_fid_readn+0x50/0xa0
[<ffffffff811c84a0>] v9fs_file_readn+0x10/0x20
[<ffffffff811c84e7>] v9fs_file_read+0x37/0x70
[<ffffffff8114e3fb>] vfs_read+0x9b/0x160
[<ffffffff81153571>] kernel_read+0x41/0x60
[<ffffffff810c83ab>] copy_module_from_fd.isra.34+0xfb/0x180
Subsequently, QEMU will die printing:
qemu-system-x86_64: virtio: trying to map MMIO memory
This patch enables 9p-virtio to correctly handle this case. This not
only enables us to load Linux kernel modules off virtfs, but also
enables ZFS file-based vdevs on virtfs to be used without killing QEMU.
Special thanks to both Avi Kivity and Alexander Graf for their
interpretation of QEMU backtraces. Without their guidence, tracking down
this bug would have taken much longer. Also, special thanks to Linus
Torvalds for his insightful explanation of why this should use
is_vmalloc_addr() instead of is_vmalloc_or_module_addr():
https://lkml.org/lkml/2014/2/8/272
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 20e7c4e80dcd01dad5e6c8b32455228b8fe9c619 ]
When a device ndo_start_xmit() calls again dev_queue_xmit(),
lockdep can complain because dev_queue_xmit() is re-entered and the
spinlocks protecting tx queues share a common lockdep class.
Same issue was fixed for bonding/l2tp/ppp in commits
0daa2303028a6 ("[PATCH] bonding: lockdep annotation")
49ee49202b4ac ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat")
23d3b8bfb8eb2 ("net: qdisc busylock needs lockdep annotations ")
303c07db487be ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ")
Reported-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|