summaryrefslogtreecommitdiff
path: root/sound/soc/mxs
AgeCommit message (Collapse)Author
2012-12-09ASoC: mxs: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: mxs-saif: export mxs_saif_put_mclk,mxs_saif_get_mclkLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-02ASoC: mxs-saif: Fix channel swap for 24-bit formatFabio Estevam
Playing 24-bit format file leads to channel swap on mx28 and the reason is that the current driver performs one write/read to/from the SAIF_DATA register to trigger the transfer. This approach works fine for S16_LE case because SAIF_DATA is a 32-bit register and thus is capable of storing the 16-bit left and right channels, but for the S24_LE case it can only store one channel, so in order to not lose the FIFO sync an extra read/write is needed. Reported-by: Dan Winner <DWinner@tc-helicon.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Dan Winner <DWinner@tc-helicon.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-01ASoC: mxs-saif: Add MODULE_ALIASFabio Estevam
Add MODULE_ALIAS information. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05Merge branch 'asoc-omap' into for-3.7Mark Brown
2012-08-08ASoC: mxs: Fix the name of the SoC familyFabio Estevam
SND_SOC_MXS_SGTL5000 is used on MXS boards, so fix the SoC family name. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-07ASoC: mxs-saif: Use devm_clk_get()Fabio Estevam
Using devm_clk_get can make the code simpler and smaller. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24ASoC: mxs-saif: set a base clock rate for EXTMASTER mode workDong Aisheng
Set an initial clock rate for the saif internal logic to work properly. This is important when working in EXTMASTER mode that uses the other saif's BITCLK&LRCLK but it still needs a basic clock which should be fast enough for the internal logic. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24ASoC: mxs-saif: fix clock prepare and enable unbalance issueDong Aisheng
Currently we directly call a clock_enable in trigger function without a clk_prepare as pair first. This will cause system hang immediately when run capture because the clock was not prepared(playback does not hang because the clock was prepared already by get_mclk before), a warning message in clock framework may cause a deadlock to reclaim clock lock (see: pl011_console_write). Here we prepare clock first in hw_param, then enable it in trigger function to guarantee the balance. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20ASoC: dmaengine-pcm: Rename and deprecate snd_dmaengine_pcm_pointerLars-Peter Clausen
Currently the sound dmaengine pcm helper functions implement the pcm_pointer callback by trying to count the number of elapsed periods. This is done by advancing the stream position in the dmaengine callback by one period. Unfortunately there is no guarantee that the callback will be called for each elapsed period. It may be possible that under high system load it is only called once for multiple elapsed periods. This patch renames the current implementation and documents its shortcomings and that it should not be used anymore in new drivers. The next patch will introduce a new snd_dmaengine_pcm_pointer which will be implemented based on querying the current stream position from the dma device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by Vinod Koul <vinod.koul@linux.intel.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: make snd_soc_dai_link more symmetricalStephen Warren
Prior to this patch, the CPU side of a DAI link was specified using a single name. Often, this was the result of calling dev_name() on the device providing the DAI, but in the case of a CPU DAI driver that provided multiple DAIs, it needed to mix together both the device name and some device-relative name, in order to form a single globally unique name. However, the CODEC side of the DAI link was specified using separate fields for device (name or OF node) and device-relative DAI name. This patch allows the CPU side of a DAI link to be specified in the same way as the CODEC side, separating concepts of device and device-relative DAI name. I believe this will be important in multi-codec and/or dynamic PCM scenarios, where a single CPU driver provides multiple DAIs, while also booting using device tree, with accompanying desire not to hard-code the CPU side device's name into the original .cpu_dai_name field. Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link() would now be identical. However, two things prevent that at present: 1) The need to save rtd->codec for the CODEC side, which means we have to search for the CODEC explicitly, and not just the CODEC side DAI. 2) Since we know the CODEC side DAI is part of a codec, and not just a standalone DAI, it's slightly more efficient to convert .codec_name/ .codec_of_node into a codec first, and then compare each DAI's .codec field, since this avoids strcmp() on each DAI's CODEC's name within the loop. However, the two loops are essentially semantically equivalent. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-23Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is the first big chunk for 3.5 merges of sound stuff. There are a few big changes in different areas. First off, the streaming logic of USB-audio endpoints has been largely rewritten for the better support of "implicit feedback". If anything about USB got broken, this change has to be checked. For HD-audio, the resume procedure was changed; instead of delaying the resume of the hardware until the first use, now waking up immediately at resume. This is for buggy BIOS. For ASoC, dynamic PCM support and the improved support for digital links between off-SoC devices are major framework changes. Some highlights are below: * HD-audio - Avoid accesses of invalid pin-control bits that may stall the codec - V-ref setup cleanups - Fix the races in power-saving code - Fix the races in codec cache hashes and connection lists - Split some common codes for BIOS auto-parser to hda_auto_parser.c - Changed the PM resume code to wake up immediately for buggy BIOS - Creative SoundCore3D support - Add Conexant CX20751/2/3/4 codec support * ASoC - Dynamic PCM support, allowing support for SoCs with internal routing through components with tight sequencing and formatting constraints within their internal paths or where there are multiple components connected with CPU managed DMA controllers inside the SoC. - Greatly improved support for direct digital links between off-SoC devices, providing a much simpler way of connecting things like digital basebands to CODECs. - Much more fine grained and robust locking, cleaning up some of the confusion that crept in with multi-component. - CPU support for nVidia Tegra 30 I2S and audio hub controllers and ST-Ericsson MSP I2S controolers - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas Instruments LM49453. - Some regmap changes needed by the Tegra I2S driver. - mc13783 audio support. * Misc - Rewrite with module_pci_driver() - Xonar DGX support for snd-oxygen - Improvement of packet handling in snd-firewire driver - New USB-endpoint streaming logic - Enhanced M-audio FTU quirks and relevant cleanups - Increment the support of OSS devices to 256 - snd-aloop accuracy improvement There are a few more pending changes for 3.5, but they will be sent slightly later as partly depending on the changes of DRM." Fix up conflicts in regmap (due to duplicate patches, with some further updates then having already come in from the regmap tree). Also some fairly trivial context conflicts in the imx and mcx soc drivers. * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: snd-usb: fix stream info output in /proc ALSA: pcm - Add proper state checks to snd_pcm_drain() ALSA: sh: Fix up namespace collision in sh_dac_audio. ALSA: hda/realtek - Fix unused variable compile warning ASoC: sh: fsi: enable chip specific data transfer mode ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger() ASoC: sh: fsi: use same format for IN/OUT ASoC: sh: fsi: add fsi_version() and removed meaningless version check ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC ASoC: tegra: Add machine driver for WM8753 codec ALSA: hda - Fix possible races of accesses to connection list array ASoC: OMAP: HDMI: Introduce codec ARM: mx31_3ds: Add sound support ASoC: imx-mc13783 cleanup mx31moboard: Add sound support ASoC: mc13783 codec cleanups ASoC: add imx-mc13783 sound support ASoC: Add mc13783 codec mfd: mc13xxx: add codec platform data ASoC: don't flip master of DT-instantiated DAI links ...
2012-05-12ASoC: mxs: add device tree support for mxs-sgtl5000Shawn Guo
Add device tree probe for mxs-sgtl5000 machine driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12ASoC: mxs: add device tree support for mxs-saifShawn Guo
Add device tree probe for mxs-saif driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12ASoC: mxs: mxs-pcm does not need to be a plaform_driverShawn Guo
Same as the commit 518de86 (ASoC: tegra: register 'platform' from DAIs, get rid of pdev), it makes mxs-pcm not a platform_driver but helper to register "platform", so that the platform_device for mxs-pcm can be saved completely. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12ASoC: mxs-saif: adopt pinctrl supportShawn Guo
Cc: alsa-devel@alsa-project.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-10ASoC: mxs: add __devinit for mxs_saif_probeShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-31Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6Linus Torvalds
Pull MTD changes from David Woodhouse: - Artem's cleanup of the MTD API continues apace. - Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst others. - More work on DiskOnChip G3, new driver for DiskOnChip G4. - Clean up debug/warning printks in JFFS2 to use pr_<level>. Fix up various trivial conflicts, largely due to changes in calling conventions for things like dmaengine_prep_slave_sg() (new inline wrapper to hide new parameter, clashing with rewrite of previously last parameter that used to be an 'append' flag, and is now a bitmap of 'unsigned long flags'). (Also some header file fallout - like so many merges this merge window - and silly conflicts with sparse fixes) * tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits) mtd: docg3 add protection against concurrency mtd: docg3 refactor cascade floors structure mtd: docg3 increase write/erase timeout mtd: docg3 fix inbound calculations mtd: nand: gpmi: fix function annotations mtd: phram: fix section mismatch for phram_setup mtd: unify initialization of erase_info->fail_addr mtd: support ONFI multi lun NAND mtd: sm_ftl: fix typo in major number. mtd: add device-tree support to spear_smi mtd: spear_smi: Remove default partition information from driver mtd: Add device-tree support to fsmc_nand mtd: fix section mismatch for doc_probe_device mtd: nand/fsmc: Remove sparse warnings and errors mtd: nand/fsmc: Add DMA support mtd: nand/fsmc: Access the NAND device word by word whenever possible mtd: nand/fsmc: Use dev_err to report error scenario mtd: nand/fsmc: Use devm routines mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform mtd: fsmc_nand: add pm callbacks to support hibernation ...
2012-03-26mxs-dma : move the mxs dma.h to a more common placeHuang Shijie
Move the header to a more common place. The mxs dma engine is not only used in mx23/mx28, but also used in mx50/mx6q. It will also be used in the future chips. Rename it to mxs-dma.h, and create a new folder include/linux/fsl/ to store the Freescale's header files. change mxs-dma driver, mxs-mmc driver, gpmi-nand driver, mxs-saif driver to the new header file. Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-02ASoC: mxs-pcm: Use dmaengine PCM helper functionsLars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-22ASoC: mxs-pcm: Request DMA channel earlyLars-Peter Clausen
Request the DMA channel in the PCM open callback instead of the hwparams callback, this allows us to let open fail if no dma channel is available. This also fixes a bug where the channel will be requested multiple times if hwparams is called multiple times. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: mxs-pcm: Remove unused fields from struct mxs_pcm_runtime_dataLars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-20ASoC: imx/mxs: remove redundant SND_PCM selectionShawn Guo
SND_PCM is already selected by SND_SOC, there is no need for SND_IMX_SOC and SND_MXS_SOC to select it again. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-10ASoC: mxs-saif: use devm_ functionsJulia Lawall
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: mxs: Fix mxs-saif timeoutFabio Estevam
On a mx28evk board the following errors happens on mxs-sgtl5000 probe: [ 0.660000] saif0_clk_set_rate: divider writing timeout [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110 [ 0.670000] ALSA device list: [ 0.680000] No soundcards found. This timeout happens because clk_set_rate will result in writing to the DIV bits of register HW_CLKCTRL_SAIF0 with the saif clock gated (CLKGATE bit set to one). MX28 Reference states the following about CLKGATE: "The DIV field can change ONLY when this clock gate bit field is low." So call clk_prepare_enable prior to clk_set_rate to fix this problem. After this change the mxs-saif driver can be correctly probed and audio is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-18Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits) ASoC: twl6040 - Add method to query optimum PDM_DL1 gain ALSA: hda - Fix the lost power-setup of seconary pins after PM resume ALSA: usb-audio: add Yamaha MOX6/MOX8 support ALSA: virtuoso: add S/PDIF input support for all Xonars ALSA: ice1724 - Support for ooAoo SQ210a ALSA: ice1724 - Allow card info based on model only ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations ALSA: hdspm - Provide unique driver id based on card serial ASoC: Dynamically allocate the rtd device for a non-empty release() ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs ALSA: hda - Use auto-parser for HP laptops with cx20459 codec ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info() ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref() ALSA: hda/cirrus - support for iMac12,2 model ASoC: cx20442: add bias control over a platform provided regulator ALSA: usb-audio - Avoid flood of frame-active debug messages ALSA: snd-usb-us122l: Delete calls to preempt_disable mfd: Put WM8994 into cache only mode when suspending ... Fix up trivial conflicts in: - arch/arm/mach-s3c64xx/mach-crag6410.c: renamed speyside_wm8962 to tobermory, added littlemill right next to it - drivers/base/regmap/{regcache.c,regmap.c}: duplicate diff that had already come in with other changes in the regmap tree
2012-01-09Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
clock management changes for i.MX Another simple series related to clock management, this time only for imx. * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: select HAVE_CLK_PREPARE for clock clk: add config option HAVE_CLK_PREPARE into Kconfig ASoC: mxs-saif: convert to clk_prepare/clk_unprepare video: mxsfb: convert to clk_prepare/clk_unprepare serial: mxs-auart: convert to clk_prepare/clk_unprepare net: flexcan: convert to clk_prepare/clk_unprepare mtd: gpmi-lib: convert to clk_prepare/clk_unprepare mmc: mxs-mmc: convert to clk_prepare/clk_unprepare dma: mxs-dma: convert to clk_prepare/clk_unprepare net: fec: add clk_prepare/clk_unprepare ARM: mxs: convert platform code to clk_prepare/clk_unprepare clk: add helper functions clk_prepare_enable and clk_disable_unprepare Fix up trivial conflicts in drivers/net/ethernet/freescale/fec.c due to commit 0ebafefcaa7a ("net: fec: add clk_prepare/clk_unprepare") clashing trivially with commit e163cc97f9ac ("net/fec: fix the .remove code").
2011-12-28ASoC: mxs: Add .owner to struct snd_soc_cardLothar Waßmann
Add missing .owner of struct snd_soc_card. This prevents the module from being removed from underneath its users. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-28ASoC: mxs-saif: convert to clk_prepare/clk_unprepareShawn Guo
The patch converts mxs-saif driver to clk_prepare/clk_unprepare by using helper functions clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Dong Aisheng <b29396@freescale.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2011-12-27Merge branch 'v3.2-rc6' into next/driversArnd Bergmann
2011-12-23ASoC: mxs: correct 'direction' of device_prep_dma_cyclicShawn Guo
The commit 49920bc (dmaengine: add new enum dma_transfer_direction) changes the type of parameter 'direction' of device_prep_dma_cyclic from dma_data_direction to dma_transfer_direction. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-22Merge branch 'for-3.2' into for-3.3Mark Brown
2011-12-22Revert "ASoC: mxs: correct 'direction' of device_prep_dma_cyclic"Mark Brown
This reverts commit dbec3b30a601791717bc5bb827e210c3b5d6e067 as it should never have been applied to the ASoC tree at all, let alone 3.2.
2011-12-20Merge branch 'for-3.2' into for-3.3Mark Brown
2011-12-20ASoC: mxs: correct 'direction' of device_prep_dma_cyclicShawn Guo
The commit 49920bc (dmaengine: add new enum dma_transfer_direction) changes the type of parameter 'direction' of device_prep_dma_cyclic from dma_data_direction to dma_transfer_direction. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-11Merge branch 'for-3.2' into for-3.3Mark Brown
Conflicts: sound/soc/mxs/mxs-pcm.c
2011-12-11ASoC: mxs: Add appropriate MODULE_ALIAS()Lothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-11ASoC: mxs: Add missing MODULE_LICENSE("GPL")Lothar Waßmann
The sound driver refuses to load as module, because of the missing MODULE_LICENSE("GPL"). The file header indicates that the driver is indeed published under the GPL. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02ASoC: mxs-saif: remove function in platform_dataDong Aisheng
Add master_mode and master_id in platfrom_data since it's board specific and board knows it. Then we can remove the function pointer in platfrom_data to make the driver more devicetree friendly. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-11-24ASoC: Convert mxs directory to module_platform_driverAxel Lin
Factor out some boilerplate code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-22ASoC: keep pointer to resource so it can be freedJulia Lawall
Add a new variable for storing resources accessed subsequent to the one accessed using request_mem_region, so the one accessed using request_mem_region can be released if needed. The resource variable names are also changed to be more descriptive. This code is also missing some calls to iounmap. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-19ASoC: mxs-saif: add record functionDong Aisheng
1. add different clkmux mode handling SAIF can use two instances to implement full duplex (playback & recording) and record saif may work on EXTMASTER mode which is using other saif's BITCLK&LRCLK. The clkmux mode could be set in pdata->init() in mach-specific code. For generic saif driver, it only needs to know who is his master and the master id is also provided in mach-specific code. 2. support playback and capture simutaneously however the sample rates can not be different due to hw limitation. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22ASoC: mxs-sgtl5000: add record functionDong Aisheng
Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22sound/soc/mxs/mxs-saif.c: add missing kfreeJulia Lawall
Move the test on pdev->id before the kzalloc to avoid requiring kfree when the test fails. This fix was suggested by Wolfram Sang. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Dong Aisheng <b29396@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22ASoC: mxs-saif: clear clk gate first before register settingDong Aisheng
Saif needs clear clk gate first before writing registers or the write will not success. The original xx_get_mclk function clear clk gate after mclk setting that may cause the former mclk setting unwork, then the real output mclk maybe inaccurate. Placing the clear before setting mclk to avoid such an issue. We also have to clear clk gate in startup instead of in prepare function. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-28ASoC: mxs: add asoc configuration filesDong Aisheng
Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-28ASoC: mxs: add mxs-sgtl5000 machine driverDong Aisheng
The driver only supports playback firstly. For recording, as we have to use two saif instances to implement full duplex (playback & recording) due to hardware limitation, we need to figure out a good design to fit in ASoC. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-28ASoC: mxs: add mxs-saif driverDong Aisheng
Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>