summaryrefslogtreecommitdiff
path: root/sound/soc/samsung
AgeCommit message (Collapse)Author
2011-06-10ASoC: SAMSUNG: Fix the incorrect referencing of I2SCON registerSangbeom Kim
If DMA active status should be checked, I2SCON register should be referenced. In this patch, Fix the incorrect referencing of I2SCON register. Reported-by : Lakkyung Jung <lakkyung.jung@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-05-25Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/Kconfig arch/arm/mach-exynos4/mach-nuri.c
2011-05-16ASoC: Remove to support sound for S5P6442Kukjin Kim
According to removing ARCH_S5P6442, we don't need to support sound for S5P6442. Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-28ASoC: Don't specify the DMA driver for Goni baseband linkMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28ASoC: Don't specify the DMA driver for OpenMoko baseband linkMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-04-28ASoC: Fix CODEC DAI names for GoniMark Brown
Immediately after sending the last fix I realised that the CODEC DAI names also don't correspond to the WM8994 driver. Update the DAI names to match. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28ASoC: Fix CODEC name in GoniMark Brown
This was typoed at some point in the multi-component merge, though the driver was added along with that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-27ASoC: Don't specify the DMA driver for Speyside baseband linkMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-18ASoC: Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
Fix trivial conflict caused by silly spelling fix patch. Conflicts: sound/soc/codecs/wm8994.c
2011-04-18Merge commit 'v2.6.39-rc3' into for-2.6.39Mark Brown
2011-04-13ASoC: Mark Speyside widgets as ignoring suspendMark Brown
Allow audio paths through the Speyside system to be kept active while the system is suspended (for example, when on a voice call) by marking all the external widgets and the DAI link to the WM1250-EV1 baseband module as ignoring suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add stub baseband link on SpeysideMark Brown
Demonstrate the connection of a baseband to the system. We add a DAI for the link to the baseband. This will become visible to the application layer - audio should be started from the application layer using an application such as this: http://opensource.wolfsonmicro.com/~gg/bluetooth-pcm/bluetooth_pcm.c which starts up audio as for CPU based playback and record up to the point where data is streamed. Due to non-availability of baseband simulation hardware we reuse the configuration for the CPU link with the CODEC acting as clock master, allowing signals to be observed with a scope. A more standard system would have separate configuration for the baseband with its own ops structure and operations. Normally the baseband would be clock master as the baseband audio will be synchronised to the external telephony network. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add pin switches for fixed analogue inputs and outputs on SpeysideMark Brown
Pin switches enable direct control of the DAPM state from userspace, enabling simple enabling and disabling of the path. This is especially useful for outputs such as the speaker which are composed of several physical devices as it allows them to be controlled as a group. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add Speyside headset jack detection supportMark Brown
Speyside makes use of support the WM8915 has for detecting the polarity of the microphone and ground connections on headsets, using a GPIO to control the polarity of the ground connection and switching between the two microphone bias supplies available on the device in order to do so. As a result of this the detection support is more involved than for most other CODECs, using a callback to configure the current polarity of the jack and translate this into the board-specific connections required for the current scenario. On Android some additional work is required to hook this up to the application layer as the Android HeadsetObserver monitors a custom drivers/switch API rather than the standard Linux APIs. This can be done by either updating HeadsetObserver or modifying the ALSA core to report via drivers/switch as well. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Support the sub speaker driver on SpeysideMark Brown
Speyside includes a WM9081 configured as an external speaker driver taking an analogue input from HPOUT2 on the WM8915 on the system. Add support for this to the driver, using a prefix of "Sub" for the WM9081 controls to ensure we avoid collisions with controls on the WM8915. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Optimise clock management for WM8915 SpeysideMark Brown
Dynamically enable and disable the FLL on the WM8915, configuring the system clock to 256fs for 48kHz when the device is active but reverting to using the input 32.768kHz clock directly at other times to support features such as jack detection with minimal power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add basic widgets for WM8915 SpeysideMark Brown
Provide widgets for the basic widgets connected directly to the WM8915 on Speyside - the headphones, speaker, digital and analogue microphones. For the outputs this is just documentation, for the inputs this ensures that the relevant microphone biases are enabled when they are in use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Initial audio support for Speyside on Cragganmore 6410Mark Brown
This is minimal code required to get audio out of the Speyside audio subsystem on the Wolfson Cragganmore 6410 reference platform. It sets up the link between the CPU and AIF1 of the WM8915 on the system, enabling audio playback via the headphone and speaker outputs of the device (which require no further configuration except runtime). It allows verification of basic functionality of the system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-11ASoC: SAMSUNG: Add WM8580 PCM Machine driverSangbeom Kim
This patch add WM8580 PCM machine driver to support PCM audio on SMDKC110, SMDKV210, SMDK6450, SMDK6440 boards. Playback and Capture supports 8kHz sampling rates. and It is tested on SMDKC110, SMDKV210, SMDK6450 Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: SAMSUNG: Fix the inverted clocks handling for pcm driverSangbeom Kim
Fix the inverted clocks handling for pcm cpu driver. By using SND_SOC_DAIFMT_NB_NF, Audio noise can be generated on SMDK. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: HDA: Realtek: Avoid unnecessary volume control index on Surround/Side ASoC: Support !REGULATOR build for sgtl5000 ALSA: hda - VIA: Fix VT1708 can't build up Headphone control issue ALSA: hda - VIA: Correct stream names for VT1818S ALSA: hda - VIA: Fix codec type for VT1708BCE at the right timing ALSA: hda - VIA: Fix invalid A-A path volume adjust issue ALSA: hda - VIA: Add missing support for VT1718S in A-A path ALSA: hda - VIA: Fix independent headphone no sound issue ALSA: hda - VIA: Fix stereo mixer recording no sound issue ALSA: hda - Set EAPD for Realtek ALC665 ALSA: usb - Remove trailing spaces from USB card name strings sound: read i_size with i_size_read() ASoC: Remove bogus check for register validity in debugfs write ASoC: mini2440: Fix uda134x codec problem.
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (308 commits) ALSA: sound/pci/asihpi: check adapter index in hpi_ioctl ALSA: aloop - Fix possible IRQ lock inversion ALSA: sound/core: merge list_del()/list_add_tail() to list_move_tail() ALSA: ctxfi - use list_move() instead of list_del()/list_add() combination ALSA: firewire - msleep needs delay.h ALSA: firewire-lib, firewire-speakers: handle packet queueing errors ALSA: firewire-lib: allocate DMA buffer separately ALSA: firewire-lib: use no-info SYT for packets without SYT sample ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver ALSA: hda - Remove an unused variable in patch_realtek.c ALSA: hda - pin-adc-mux-dmic auto-configuration of 92HD8X codecs ALSA: hda - fix digital mic selection in mixer on 92HD8X codecs ALSA: hda - Move default input-src selection to init part ALSA: hda - Initialize special cases for input src in init phase ALSA: ctxfi - Clear input settings before initialization ALSA: ctxfi - Fix SPDIF status retrieval ALSA: ctxfi - Fix incorrect SPDIF status bit mask ALSA: ctxfi - Fix microphone boost codes/comments ALSA: atiixp - Fix wrong time-out checks during ac-link reset ALSA: intel8x0m: append 'm' to "r_intel8x0" ...
2011-03-11ASoC: mini2440: Fix uda134x codec problem.Marek Belisko
ASoC audio for mini2440 platform in current kenrel doesn't work. First problem is samsung_asoc_dma device is missing in initialization. Next problem is with codec. Codec is initialized but never probed because no platform_device exist for codec driver. It leads to errors during codec binding to asoc dai. Next problem was platform data which was passed from board to asoc main driver but not passed to codec when called codec_soc_probe(). Following patch should fix issues. But not sure if in correct way. Please review. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-07ASoC: Add driver for the dfbmcs320 bluetooth moduleLars-Peter Clausen
This patch adds a codec driver for the dfbmcs320 bluetooth module, which is used on the neo1973 boards. The patch also modifies the neo1937_wm8753 sound board driver to use the new driver instead of registering the bluetooth DAI manually. Previously there was a name mismatch between the bluetooth DAI and the bluetooth DAI link and the sound card was not instantiated, with this patch the issue is no longer present and sound support works again. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Samsung: Merge neo1937_wm8753 and neo1973_gta02_wm8753 sound board driverLars-Peter Clausen
The neo1973(GTA01) and neo1973_gta02(GTA02) have a very similar audio hardware setup. They both use the same codec with the same routing to the gsm modem and bluetooth chip. But they do use different AMPs though and there are some minor differences in the speaker setup. As a result most of the code of those two drivers is identical. So from a maintenance point of view it makes sense to merge them into a single driver. It also reduces the size of kernel images supporting both the GTA01 and GTA02. As a side-effect of this merge the GTA01 for example gains support for routing audio to and from the bluetooth DAI. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_gta02_wm8753: Use gpio_request_array to request gpiosLars-Peter Clausen
Using gpio_request_array instead of requesting and setting up each gpio by hand makes the code more readable and more compact. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_gta02_wm8753: Remove lm4853_{set,get}_stateLars-Peter Clausen
This patch drops the lm4853_{set,get}_state functions and the "Amp State Switch" control. Those were noops which existed to maintain alsa state file compatibility. Since the control names have changed due to internal changes in the ASoC core and state file compatibility was broken anyway it makes sense to drop them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_wm8753: Move lm4857 specefic code to its own moduleLars-Peter Clausen
This patch moves the code for the lm4857 AMP from the neo1973_wm8753 sound board driver to its own module. The lm4857 is a generic AMP IC and not specific to the neo1973. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_wm8753: Remove scenario management code.Lars-Peter Clausen
It has been proven to be inflexible to do scenario management in kernel space. Since actual neo1973 board support has not been merged in mainline and this patch has been in the neo1973 tree for some time now it should be safe to remove this functionality without breaking existing userspace. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-25ASoC: remove one to many l's in the wordJustin P. Mattock
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-22ASoC: Change dependency of ARCH_EXYNOS4Kukjin Kim
This patch changes dependency of ARCH_EXYNOS4 from ARCH_S5PV310 according to the change of ARCH name, EXYNOS4. Acked-by: Jassi Brar <jassi.brar@samsung.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-31ASoC: neo1973_wm8753 audio support does not require scoopH Hartley Sweeten
This driver does not use any of the functionality provided by the scoop hardware. Remove the unneeded header. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-25Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-25ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2sLars-Peter Clausen
During the multi-component patch the s3c24xx i2s driver was renamed from "s3c24xx-i2s" to "s3c24xx-iis", while the sound board drivers were not updated to reflect this change as well. As a result there is no match between the dai_link and the i2s driver and no sound card is instantiated. This patch fixes the problem by updating the sound board drivers to use "s3c24xx-iis" for the cpu_dai_name. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-25ASoC: Fix codec device id format used by some dai_linksLars-Peter Clausen
The id part of an I2C device name is created with the "%d-%04x" format string. So for example for an I2C device which is connected to the adapter with the id 0 and has its address set to 0x1a the id part of the devices name would be "0-001a". Currently some sound board drivers have the id part the codec_name field of their dai_link structures set as if it had been created by a "%d-0x%x" format string. For example "0-0x1a" instead of "0-001a". As a result there is no match between the codec device and the dai_link and no sound card is instantiated. This patch fixes it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-19Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (348 commits) ALSA: hda - Fix NULL-derefence with a single mic in STAC auto-mic detection ALSA: hda - Add missing NID 0x19 fixup for Sony VAIO ALSA: hda - Fix ALC275 enable hardware EQ for SONY VAIO ALSA: oxygen: fix Xonar DG input ALSA: hda - Fix EAPD on Lenovo NB ALC269 to low ALSA: hda - Fix missing EAPD for Acer 4930G ALSA: hda: Disable 4/6 channels on some NVIDIA GPUs. ALSA: hda - Add static_hdmi_pcm option to HDMI codec parser ALSA: hda - Don't refer ELD when unplugged ASoC: tpa6130a2: Fix compiler warning ASoC: tlv320dac33: Add DAPM selection for LOM invert ASoC: DMIC codec: Adding a generic DMIC codec ALSA: snd-usb-us122l: Fix missing NULL checks ALSA: snd-usb-us122l: Fix MIDI output ASoC: soc-cache: Fix invalid memory access during snd_soc_lzo_cache_sync() ASoC: Fix section mismatch in wm8995.c ALSA: oxygen: add S/PDIF source selection for Claro cards ALSA: oxygen: fix CD/MIDI for X-Meridian (2G) ASoC: fix migor audio build ALSA: include delay.h for msleep in Xonar DG support ...
2011-01-13Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-11ASoC: SAMSUNG: Clean-up header includesSeungwhan Youn
This patch remove including unnecessary/duplicated headers which relative with Samsung SoCs. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: RX1950: Enable Mic Jack during glue driver initVasily Khoruzhick
Enable Mic Jack during glue driver init, otherwise capture will not work. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: SAMSUNG: Move PCM specific definitions into pcm.cSeungwhan Youn
This patch moves PCM specific definitions, they doesn't need to be shared, into 'pcm.c' from 'pcm.h'. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: SAMSUNG: Clean-up DMA header fileSeungwhan Youn
This patch moves DMA specific definitions, they doesn't need to be shared, into 'dma.c' from 'dma.h'. And remove unnecessery definitions on 'dma.h'. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: SAMSUNG: Remove AC97 header fileSeungwhan Youn
This patch moves AC97 specific definitions, they doesn't need to be shared, into 'ac97.c' from 'ac97.h'. This patch also remove header file, 'ac97.h', and remove includes on machine drivers. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-05ASoC: Remove needless inclusion of tlv320aic3x.h from machine driversJarkko Nikula
After multi-component conversion these machine drivers don't actually need anything from sound/soc/codecs/tlv320aic3x.h so don't include it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-05ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_Mark Brown
The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22ASoC: SAMSUNG: Debug wrong parameterSeungwhan Youn
snd_soc_jack_new()'s first parameter was changed from snd_soc_card to snd_soc_codec after Multi-Component support patches. So, this patch fixes parameter that we missed. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDKV310: Add I2S supportJassi Brar
Add ASoC machine driver for SMDKV310/C210 boards that have a WM8994 attached to I2S-0. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20ASoC: SMDKV310: Enable AC97 deviceJassi Brar
Enable AC97 audio device on SMDKV310/C210. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>