From 1f11a10d658b817f736c5e049ba8edc3fe8f638c Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Mon, 12 Dec 2011 10:51:30 +0800
Subject: blackfin: bf533-stamp: fix ad1836 name

The ASoC codec name is "ad1836" and not "ad183x" as the change to rename
things ultimately did not get merged.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 2afd02e..d12d4de 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -219,9 +219,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
+	defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 	{
-		.modalias = "ad183x",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = 4,
-- 
cgit v0.10.2


From e7da266265e70f37b6702314dcb3b71c3f4a7def Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Mon, 12 Dec 2011 10:57:32 +0800
Subject: blackfin: bf533-stamp: add missed patches for new asoc driver

ASoC drivers changed between 2.6.37 and 3.0, but we didn't apply these changes
in bf533 board file.

So apply missed patches for asoc since 2.6.37 together.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index d12d4de..2ba4d0b 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -541,27 +541,150 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
+	defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) \
+	|| defined(CONFIG_SND_BF5XX_AC97) || \
+	defined(CONFIG_SND_BF5XX_AC97_MODULE)
+
+#include <asm/bfin_sport.h>
+
+#define SPORT_REQ(x) \
+	[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
+		P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
+
+static const u16 bfin_snd_pin[][7] = {
+	SPORT_REQ(0),
+	SPORT_REQ(1),
+};
+
+static struct bfin_snd_platform_data bfin_snd_data[] = {
+	{
+		.pin_req = &bfin_snd_pin[0][0],
+	},
+	{
+		.pin_req = &bfin_snd_pin[1][0],
+	},
+};
+
+#define BFIN_SND_RES(x) \
+	[x] = { \
+		{ \
+			.start = SPORT##x##_TCR1, \
+			.end = SPORT##x##_TCR1, \
+			.flags = IORESOURCE_MEM \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_RX, \
+			.end = CH_SPORT##x##_RX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_TX, \
+			.end = CH_SPORT##x##_TX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = IRQ_SPORT##x##_ERROR, \
+			.end = IRQ_SPORT##x##_ERROR, \
+			.flags = IORESOURCE_IRQ, \
+		} \
+	}
+
+static struct resource bfin_snd_resources[][4] = {
+	BFIN_SND_RES(0),
+	BFIN_SND_RES(1),
+};
+#endif
+
 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s_pcm = {
+	.name = "bfin-i2s-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm_pcm = {
+	.name = "bfin-tdm-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97_pcm = {
+	.name = "bfin-ac97-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
+	defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+static const unsigned ad73311_gpio[] = {
+	GPIO_PF4,
+};
+
+static struct platform_device bfin_ad73311_machine = {
+	.name = "bfin-snd-ad73311",
+	.id = 1,
+	.dev = {
+		.platform_data = (void *)ad73311_gpio,
+	},
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+static struct platform_device bfin_ad73311_codec_device = {
+	.name = "ad73311",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+static struct platform_device bfin_ad74111_codec_device = {
+	.name = "ad74111",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
+	defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	/* TODO: add platform data here */
+	.num_resources =
+		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
 };
 #endif
 
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \
+	defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
 static struct platform_device bfin_tdm = {
 	.name = "bfin-tdm",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	/* TODO: add platform data here */
+	.num_resources =
+		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
 };
 #endif
 
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
+	defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
 static struct platform_device bfin_ac97 = {
 	.name = "bfin-ac97",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	/* TODO: add platform data here */
+	.num_resources =
+		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
 };
 #endif
 
@@ -597,7 +720,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif
 
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || \
+	defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -619,14 +743,42 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
-	&bfin_i2s,
+	&bfin_i2s_pcm,
 #endif
 
 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
-	&bfin_tdm,
+	&bfin_tdm_pcm,
 #endif
 
 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97_pcm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
+	defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+	&bfin_ad73311_machine,
+#endif
+
+#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+	&bfin_ad73311_codec_device,
+#endif
+
+#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+	&bfin_ad74111_codec_device,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
+	defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \
+	defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
+	defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
 	&bfin_ac97,
 #endif
 };
-- 
cgit v0.10.2


From 16df3666f43507a6d21e192dae39b69cafc17089 Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Mon, 12 Dec 2011 10:59:48 +0800
Subject: blackfin: smp: add suspend and wakeup irq flags

Add IRQF_NO_SUSPEND | IRQF_FORCE_RESUME to irq flags, supplement irq should
not be disabled when system do suspend.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index db22401..b2a6b77 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -114,7 +114,8 @@ void __init platform_request_ipi(int irq, void *handler)
 	int ret;
 	const char *name = (irq == IRQ_SUPPLE_0) ? supple0 : supple1;
 
-	ret = request_irq(irq, handler, IRQF_PERCPU, name, handler);
+	ret = request_irq(irq, handler, IRQF_PERCPU | IRQF_NO_SUSPEND |
+			IRQF_FORCE_RESUME, name, handler);
 	if (ret)
 		panic("Cannot request %s for IPI service", name);
 }
-- 
cgit v0.10.2


From d0014be47dc90d15adf7d6e09031d06e2aa7ce79 Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Mon, 12 Dec 2011 11:04:05 +0800
Subject: blackfin: smp: cleanup smp code

move idle task point to percpu blackfin_cpudata and add smp_timer_broadcast
interface.
enable SUPPLE_1_WAKEUP and add BFIN_IPI_TIMER ipi support.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index 0504378..e349631 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -14,6 +14,9 @@ struct blackfin_cpudata {
 	struct cpu cpu;
 	unsigned int imemctl;
 	unsigned int dmemctl;
+#ifdef CONFIG_SMP
+	struct task_struct *idle;
+#endif
 };
 
 DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);
diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h
index af6c0aa..dc3d144 100644
--- a/arch/blackfin/include/asm/smp.h
+++ b/arch/blackfin/include/asm/smp.h
@@ -37,7 +37,7 @@ extern unsigned long dcache_invld_count[NR_CPUS];
 #endif
 
 void smp_icache_flush_range_others(unsigned long start,
-				   unsigned long end);
+					unsigned long end);
 #ifdef CONFIG_HOTPLUG_CPU
 void coreb_die(void);
 void cpu_die(void);
@@ -46,4 +46,7 @@ int __cpu_disable(void);
 int __cpu_die(unsigned int cpu);
 #endif
 
+void smp_timer_broadcast(const struct cpumask *mask);
+
+
 #endif /* !__ASM_BLACKFIN_SMP_H */
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 1bcf3a3..6efd944 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -219,7 +219,7 @@ static void __init bfin_gptmr0_clockevent_init(struct clock_event_device *evt)
 
 #if defined(CONFIG_TICKSOURCE_CORETMR)
 /* per-cpu local core timer */
-static DEFINE_PER_CPU(struct clock_event_device, coretmr_events);
+DEFINE_PER_CPU(struct clock_event_device, coretmr_events);
 
 static int bfin_coretmr_set_next_event(unsigned long cycles,
 				struct clock_event_device *evt)
@@ -281,6 +281,25 @@ void bfin_coretmr_init(void)
 #ifdef CONFIG_CORE_TIMER_IRQ_L1
 __attribute__((l1_text))
 #endif
+
+static void broadcast_timer_set_mode(enum clock_event_mode mode,
+		struct clock_event_device *evt)
+{
+}
+
+static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
+{
+	evt->name       = "dummy_timer";
+	evt->features   = CLOCK_EVT_FEAT_ONESHOT |
+		CLOCK_EVT_FEAT_PERIODIC |
+		CLOCK_EVT_FEAT_DUMMY;
+	evt->rating     = 400;
+	evt->mult       = 1;
+	evt->set_mode   = broadcast_timer_set_mode;
+
+	clockevents_register_device(evt);
+}
+
 irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id)
 {
 	int cpu = smp_processor_id();
@@ -306,6 +325,11 @@ void bfin_coretmr_clockevent_init(void)
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
 
+#ifdef CONFIG_SMP
+	evt->broadcast = smp_timer_broadcast;
+#endif
+
+
 	evt->name = "bfin_core_timer";
 	evt->rating = 350;
 	evt->irq = -1;
diff --git a/arch/blackfin/mach-bf561/include/mach/pll.h b/arch/blackfin/mach-bf561/include/mach/pll.h
index 7977db2..00bdace 100644
--- a/arch/blackfin/mach-bf561/include/mach/pll.h
+++ b/arch/blackfin/mach-bf561/include/mach/pll.h
@@ -16,6 +16,7 @@
 #include <mach/irq.h>
 
 #define SUPPLE_0_WAKEUP ((IRQ_SUPPLE_0 - (IRQ_CORETMR + 1)) % 32)
+#define SUPPLE_1_WAKEUP ((IRQ_SUPPLE_1 - (IRQ_CORETMR + 1)) % 32)
 
 static inline void
 bfin_iwr_restore(unsigned long iwr0, unsigned long iwr1, unsigned long iwr2)
@@ -42,7 +43,8 @@ bfin_iwr_save(unsigned long niwr0, unsigned long niwr1, unsigned long niwr2,
 static inline void
 bfin_iwr_set_sup0(unsigned long *iwr0, unsigned long *iwr1, unsigned long *iwr2)
 {
-	bfin_iwr_save(0, IWR_ENABLE(SUPPLE_0_WAKEUP), 0, iwr0, iwr1, iwr2);
+	bfin_iwr_save(0, IWR_ENABLE(SUPPLE_0_WAKEUP) |
+			IWR_ENABLE(SUPPLE_1_WAKEUP), 0, iwr0, iwr1, iwr2);
 }
 
 #endif
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index b2a6b77..ab1c617 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -84,7 +84,7 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
 
 	if ((bfin_read_SYSCR() & COREB_SRAM_INIT) == 0) {
 		/* CoreB already running, sending ipi to wakeup it */
-		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
+		smp_send_reschedule(cpu);
 	} else {
 		/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
 		bfin_write_SYSCR(bfin_read_SYSCR() & ~COREB_SRAM_INIT);
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 0784a52..d346405 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/cache.h>
+#include <linux/clockchips.h>
 #include <linux/profile.h>
 #include <linux/errno.h>
 #include <linux/mm.h>
@@ -47,9 +48,10 @@ unsigned long blackfin_iflush_l1_entry[NR_CPUS];
 
 struct blackfin_initial_pda __cpuinitdata initial_pda_coreb;
 
-#define BFIN_IPI_RESCHEDULE   0
-#define BFIN_IPI_CALL_FUNC    1
-#define BFIN_IPI_CPU_STOP     2
+#define BFIN_IPI_TIMER	      0
+#define BFIN_IPI_RESCHEDULE   1
+#define BFIN_IPI_CALL_FUNC    2
+#define BFIN_IPI_CPU_STOP     3
 
 struct blackfin_flush_data {
 	unsigned long start;
@@ -160,6 +162,14 @@ static irqreturn_t ipi_handler_int0(int irq, void *dev_instance)
 	return IRQ_HANDLED;
 }
 
+DECLARE_PER_CPU(struct clock_event_device, coretmr_events);
+void ipi_timer(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
+	evt->event_handler(evt);
+}
+
 static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 {
 	struct ipi_message *msg;
@@ -176,6 +186,9 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 	while (msg_queue->count) {
 		msg = &msg_queue->ipi_message[msg_queue->head];
 		switch (msg->type) {
+		case BFIN_IPI_TIMER:
+			ipi_timer();
+			break;
 		case BFIN_IPI_RESCHEDULE:
 			scheduler_ipi();
 			break;
@@ -297,8 +310,6 @@ void smp_send_reschedule(int cpu)
 {
 	cpumask_t callmap;
 	/* simply trigger an ipi */
-	if (cpu_is_offline(cpu))
-		return;
 
 	cpumask_clear(&callmap);
 	cpumask_set_cpu(cpu, &callmap);
@@ -308,6 +319,16 @@ void smp_send_reschedule(int cpu)
 	return;
 }
 
+void smp_send_msg(const struct cpumask *mask, unsigned long type)
+{
+	smp_send_message(*mask, type, NULL, NULL, 0);
+}
+
+void smp_timer_broadcast(const struct cpumask *mask)
+{
+	smp_send_msg(mask, BFIN_IPI_TIMER);
+}
+
 void smp_send_stop(void)
 {
 	cpumask_t callmap;
@@ -326,17 +347,24 @@ void smp_send_stop(void)
 int __cpuinit __cpu_up(unsigned int cpu)
 {
 	int ret;
-	static struct task_struct *idle;
+	struct blackfin_cpudata *ci = &per_cpu(cpu_data, cpu);
+	struct task_struct *idle = ci->idle;
 
-	if (idle)
+	if (idle) {
 		free_task(idle);
-
-	idle = fork_idle(cpu);
-	if (IS_ERR(idle)) {
-		printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
-		return PTR_ERR(idle);
+		idle = NULL;
 	}
 
+	if (!idle) {
+		idle = fork_idle(cpu);
+		if (IS_ERR(idle)) {
+			printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
+			return PTR_ERR(idle);
+		}
+		ci->idle = idle;
+	} else {
+		init_idle(idle, cpu);
+	}
 	secondary_stack = task_stack_page(idle) + THREAD_SIZE;
 
 	ret = platform_boot_secondary(cpu, idle);
@@ -411,6 +439,7 @@ void __cpuinit secondary_start_kernel(void)
 
 	bfin_setup_caches(cpu);
 
+	notify_cpu_starting(cpu);
 	/*
 	 * Calibrate loops per jiffy value.
 	 * IRQs need to be enabled here - D-cache can be invalidated
-- 
cgit v0.10.2


From 5ef835ebf9672cc594af0d13accd8fb239926a0f Mon Sep 17 00:00:00 2001
From: Scott Jiang <scott.jiang.linux@gmail.com>
Date: Thu, 3 Nov 2011 14:36:06 -0400
Subject: blackfin: config: update def config for all boards

Config name for spi controller driver has been modified in previous commit,
so update default config accordingly.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 5edcb58..0b7039c 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -80,7 +80,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 2e54957..5553205 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -97,7 +97,7 @@ CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_WATCHDOG=y
diff --git a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
index ad0881b..d95658f 100644
--- a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
+++ b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
@@ -68,7 +68,7 @@ CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=400
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
index 8465b3e..498f64a 100644
--- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
@@ -105,7 +105,7 @@ CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 5e7321b..72e0317 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -99,7 +99,7 @@ CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index a7eb54b..2f075e0 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -81,7 +81,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index b90d379..ab38a82 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -84,7 +84,7 @@ CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_GPIO=m
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 0053625..5c802d6 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -94,7 +94,7 @@ CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 580bf42..972aa62 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -101,7 +101,7 @@ CONFIG_I2C=m
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 0e6d841..7a1e3bf 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -113,7 +113,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
index 77a27e3..0fdc4ec 100644
--- a/arch/blackfin/configs/BF561-ACVILON_defconfig
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -85,7 +85,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_PCA_PLATFORM=y
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
diff --git a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
index f5ed34e..78adbbf 100644
--- a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
@@ -84,7 +84,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index d7ff2ae..d3cd0f5 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -86,7 +86,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 8501431..7b982d0 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -80,7 +80,7 @@ CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_GPIO=m
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_SPI_SPIDEV=m
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index dbf750c..c280a50 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -88,7 +88,7 @@ CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_WATCHDOG=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 07ffbda..c940a1e 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -57,7 +57,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 707cbf8..2e47df7 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -78,7 +78,7 @@ CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_USB_GADGET=m
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 4596935..6da629f 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -72,7 +72,7 @@ CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_USB_GADGET=y
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 9f1d084..349922b 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -89,7 +89,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_BFIN_WDT=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index 6c7b215..0456dea 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -78,7 +78,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_USB_GADGET=m
diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig
index b192acf..89162d0 100644
--- a/arch/blackfin/configs/DNP5370_defconfig
+++ b/arch/blackfin/configs/DNP5370_defconfig
@@ -78,7 +78,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 06e9f49..a26436b 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -68,7 +68,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_WATCHDOG=y
 CONFIG_SOUND=m
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 5e797cf..6479915 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -70,7 +70,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_USB=y
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index a566a2f..8fd9b44 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -84,7 +84,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 12e66cd..0520c16 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -71,7 +71,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_HWMON=m
 CONFIG_WATCHDOG=y
 CONFIG_BFIN_WDT=y
diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig
index d496ae9..e4ed865 100644
--- a/arch/blackfin/configs/TCM-BF518_defconfig
+++ b/arch/blackfin/configs/TCM-BF518_defconfig
@@ -92,7 +92,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 65f6421..c1f45f1 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -70,7 +70,7 @@ CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_BFIN_WDT=y
-- 
cgit v0.10.2


From 7d157fb02bc3f4dc74e6830725864ba501d92da7 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Mon, 7 Nov 2011 18:40:10 +0800
Subject: blackfin: config: update macro SPI_BFIN in board file

Macro name for spi controller driver has been modified, so update default
board file accordingly.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d1c0c0c..c4de8f9 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -61,7 +61,7 @@ static struct physmap_flash_data ezbrd_flash_data = {
 
 static struct resource ezbrd_flash_resource = {
 	.start = 0x20000000,
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	.end   = 0x202fffff,
 #else
 	.end   = 0x203fffff,
@@ -292,7 +292,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 };
 
 /* SPI controller data */
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI (0) */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 6,
@@ -715,7 +715,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 	&bfin_spi1_device,
 #endif
@@ -777,7 +777,7 @@ static int __init ezbrd_init(void)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
 	peripheral_request(P_AMS2, "ParaFlash");
-#if !defined(CONFIG_SPI_BFIN) && !defined(CONFIG_SPI_BFIN_MODULE)
+#if !defined(CONFIG_SPI_BFIN5XX) && !defined(CONFIG_SPI_BFIN5XX_MODULE)
 	peripheral_request(P_AMS3, "ParaFlash");
 #endif
 	return 0;
diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
index 5470bf8..f271310 100644
--- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c
+++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -228,7 +228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 };
 
 /* SPI controller data */
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI (0) */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 6,
@@ -635,7 +635,7 @@ static struct platform_device *tcm_devices[] __initdata = {
 	&bfin_mac_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 	&bfin_spi1_device,
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
index 5bc6938..c8d5d2b 100644
--- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
+++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -334,7 +334,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
@@ -744,7 +744,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_mac_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index cd28969..7330607 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -444,7 +444,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -893,7 +893,7 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 9f792ea..db3ecfc 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -371,7 +371,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -776,7 +776,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_mac_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 3ecafff..dfdd8e6 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -664,7 +664,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -1189,7 +1189,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index 3a92c43..360e97f 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -448,7 +448,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS,
@@ -831,7 +831,7 @@ static struct platform_device *tll6527m_devices[] __initdata = {
 	&bfin_mac_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 47cadd3..6cb7b3e 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -125,7 +125,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -398,7 +398,7 @@ static struct platform_device *h8606_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
@@ -428,7 +428,7 @@ static int __init H8606_init(void)
 	printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
 	return 0;
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 18817d5..de44a37 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -146,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -422,7 +422,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 2c8f30e..fe47e04 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -29,7 +29,7 @@
  */
 const char bfin_board_name[] = "Bluetechnix CM BF533";
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -536,7 +536,7 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
@@ -549,7 +549,7 @@ static int __init cm_bf533_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
 	return 0;
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 144556e..07811c2 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -245,7 +245,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -484,7 +484,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&smc91x_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index b597d4e..e303dae 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -104,7 +104,7 @@ static struct platform_device dm9000_device2 = {
 #endif
 
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
@@ -270,7 +270,7 @@ static struct platform_device *ip0x_devices[] __initdata = {
 #endif
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&spi_bfin_master_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 2ba4d0b..edd057d 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -252,7 +252,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -704,7 +704,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index 604a430..0d4a2f6 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -31,7 +31,7 @@
  */
 const char bfin_board_name[] = "Bluetechnix CM BF537E";
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -735,7 +735,7 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
@@ -770,7 +770,7 @@ static int __init cm_bf537e_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index d916b46..f553698 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -32,7 +32,7 @@
  */
 const char bfin_board_name[] = "Bluetechnix CM BF537U";
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -700,7 +700,7 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
@@ -747,7 +747,7 @@ static int __init cm_bf537u_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c
index 5f30722..11dadeb 100644
--- a/arch/blackfin/mach-bf537/boards/dnp5370.c
+++ b/arch/blackfin/mach-bf537/boards/dnp5370.c
@@ -125,7 +125,7 @@ static struct platform_device asmb_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 
@@ -370,7 +370,7 @@ static struct platform_device *dnp5370_devices[] __initdata = {
 	&bfin_mac_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&spi_bfin_master_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 3901dd0..d2d7128 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -121,7 +121,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 
 #if defined(CONFIG_MTD_M25P80) \
@@ -496,7 +496,7 @@ static struct platform_device *minotaur_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
@@ -537,7 +537,7 @@ static int __init minotaur_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bfin_spi_board_info,
 				ARRAY_SIZE(bfin_spi_board_info));
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index aebd31c..6fd8470 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -154,7 +154,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 
 #if defined(CONFIG_MTD_M25P80) \
@@ -477,7 +477,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
@@ -508,7 +508,7 @@ static int __init pnav_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bfin_spi_board_info,
 				ARRAY_SIZE(bfin_spi_board_info));
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 7fbb0bb..c59d21f 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1420,7 +1420,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
@@ -2716,7 +2716,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 6917ce2..9885176 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -32,7 +32,7 @@
  */
 const char bfin_board_name[] = "Bluetechnix TCM BF537";
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -702,7 +702,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
@@ -737,7 +737,7 @@ static int __init tcm_bf537_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
 
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 8356eb5..1633a6f 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -490,7 +490,7 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -874,7 +874,7 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bf538_spi_master0,
 	&bf538_spi_master1,
 	&bf538_spi_master2,
@@ -938,7 +938,7 @@ static int __init ezkit_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices));
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bf538_spi_board_info,
 			ARRAY_SIZE(bf538_spi_board_info));
 #endif
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 0350eac..68af594 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -854,7 +854,7 @@ static struct platform_device para_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -1175,7 +1175,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 	&bf54x_sdh_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bf54x_spi_master0,
 	&bf54x_spi_master1,
 #endif
@@ -1210,7 +1210,7 @@ static int __init cm_bf548_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bf54x_spi_board_info,
 			ARRAY_SIZE(bf54x_spi_board_info));
 #endif
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index bb868ac..5ea6eca 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -1110,7 +1110,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 };
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -1502,7 +1502,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bf54x_sdh_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bf54x_spi_master0,
 	&bf54x_spi_master1,
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index b1b7339..f6ffd6f 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -372,7 +372,7 @@ static struct bfin5xx_spi_chip data_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -475,7 +475,7 @@ static struct platform_device bfin_dpmc = {
 static struct platform_device *acvilon_devices[] __initdata = {
 	&bfin_dpmc,
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index c017cf0..d81450f 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -29,7 +29,7 @@
  */
 const char bfin_board_name[] = "Bluetechnix CM BF561";
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
 
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -488,7 +488,7 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
@@ -523,7 +523,7 @@ static int __init cm_bf561_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
 
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 27f22ed..5ade37d 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -291,7 +291,7 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -462,7 +462,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_isp1760_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 	&bfin_spi0_device,
 #endif
 
-- 
cgit v0.10.2


From a2eff9dd8bca6d03bc3c87790bac3fdb4fe6dbf0 Mon Sep 17 00:00:00 2001
From: Steven Miao <realmz6@gmail.com>
Date: Fri, 25 Nov 2011 14:25:30 +0800
Subject: blackfin: smp: fix msg queue overflow issue

disable preemption when icache flush and use wait mode cross call, hold the msg
queue lock while handle cross function call to avoid overflow

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index d346405..ac8f8a4 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -193,14 +193,10 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 			scheduler_ipi();
 			break;
 		case BFIN_IPI_CALL_FUNC:
-			spin_unlock_irqrestore(&msg_queue->lock, flags);
 			ipi_call_function(cpu, msg);
-			spin_lock_irqsave(&msg_queue->lock, flags);
 			break;
 		case BFIN_IPI_CPU_STOP:
-			spin_unlock_irqrestore(&msg_queue->lock, flags);
 			ipi_cpu_stop(cpu);
-			spin_lock_irqsave(&msg_queue->lock, flags);
 			break;
 		default:
 			printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
@@ -482,8 +478,10 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
 	smp_flush_data.start = start;
 	smp_flush_data.end = end;
 
-	if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
+	preempt_disable();
+	if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
 		printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
+	preempt_enable();
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
 
-- 
cgit v0.10.2


From 4dbeccdf7b7573e90b442b6bd896c10c1608e72d Mon Sep 17 00:00:00 2001
From: Steven Miao <realmz6@gmail.com>
Date: Wed, 30 Nov 2011 11:42:49 +0800
Subject: bf54x: get mem size: missing break in switch

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index dfa2525..d6102c8 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -828,10 +828,18 @@ static inline int __init get_mem_size(void)
 	u32 ddrctl = bfin_read_EBIU_DDRCTL1();
 	int ret = 0;
 	switch (ddrctl & 0xc0000) {
-		case DEVSZ_64:  ret = 64 / 8;
-		case DEVSZ_128: ret = 128 / 8;
-		case DEVSZ_256: ret = 256 / 8;
-		case DEVSZ_512: ret = 512 / 8;
+	case DEVSZ_64:
+		ret = 64 / 8;
+		break;
+	case DEVSZ_128:
+		ret = 128 / 8;
+		break;
+	case DEVSZ_256:
+		ret = 256 / 8;
+		break;
+	case DEVSZ_512:
+		ret = 512 / 8;
+		break;
 	}
 	switch (ddrctl & 0x30000) {
 		case DEVWD_4:  ret *= 2;
-- 
cgit v0.10.2


From 6f2efbdeda5e45e7087f3ae0f8c354056a96491c Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Tue, 6 Dec 2011 10:00:35 +0800
Subject: blackfin: serial: bfin-uart: remove unused field

Remove unused field for hardware flow control.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index ecacdf3..68bcc3d 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -51,9 +51,6 @@ struct bfin_serial_port {
 #elif ANOMALY_05000363
 	unsigned int anomaly_threshold;
 #endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	int scts;
-#endif
 #if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
 	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
 	int cts_pin;
-- 
cgit v0.10.2


From 8ded9709a171a52199c5ac64912c52f7290870a0 Mon Sep 17 00:00:00 2001
From: Scott Jiang <scott.jiang.linux@gmail.com>
Date: Tue, 6 Dec 2011 16:13:43 -0500
Subject: blackfin: bf537: change num_chipselect for spi-sport

spi sport driver can support any gpio as its cs pin.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c59d21f..1b34466 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1462,7 +1462,7 @@ static struct platform_device bfin_spi0_device = {
 
 /* SPORT SPI controller data */
 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
-	.num_chipselect = 1, /* master only supports one device */
+	.num_chipselect = MAX_BLACKFIN_GPIOS,
 	.enable_dma = 0,  /* master don't support DMA */
 	.pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
 		P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
@@ -1492,7 +1492,7 @@ static struct platform_device bfin_sport_spi0_device = {
 };
 
 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
-	.num_chipselect = 1, /* master only supports one device */
+	.num_chipselect = MAX_BLACKFIN_GPIOS,
 	.enable_dma = 0,  /* master don't support DMA */
 	.pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
 		P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
-- 
cgit v0.10.2


From 1247f2f077eb556dc8c72e2e55928b3f01765cd5 Mon Sep 17 00:00:00 2001
From: Steven Miao <realmz6@gmail.com>
Date: Wed, 7 Dec 2011 17:39:56 +0800
Subject: blackfin: mac: dsa: add vlan mask in board file

Else push file through ftp/rcp will fail.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index c4de8f9..a2d96d3 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -122,6 +122,8 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 	.phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
 #endif
+	.vlan1_mask = 1,
+	.vlan2_mask = 2,
 };
 
 static struct platform_device bfin_mii_bus = {
-- 
cgit v0.10.2


From 7c8e62deeb98713fcce903662a66b16bd04dc602 Mon Sep 17 00:00:00 2001
From: Aaron Wu <Aaron.Wu@analog.com>
Date: Mon, 12 Dec 2011 18:04:54 +0800
Subject: blackfin: i2c-lcd: change default clock rate

Change default clock rate of GPIO based I2C operation for BF533
and BF561 to bring up the I2C interface LCD display

Signed-off-by: Aaron Wu <Aaron.Wu@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index edd057d..ce88a71 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -472,7 +472,7 @@ static struct i2c_gpio_platform_data i2c_gpio_data = {
 	.scl_pin		= GPIO_PF3,
 	.sda_is_open_drain	= 0,
 	.scl_is_open_drain	= 0,
-	.udelay			= 40,
+	.udelay			= 10,
 };
 
 static struct platform_device i2c_gpio_device = {
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 5ade37d..c60638f 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -383,7 +383,7 @@ static struct i2c_gpio_platform_data i2c_gpio_data = {
 	.scl_pin		= GPIO_PF0,
 	.sda_is_open_drain	= 0,
 	.scl_is_open_drain	= 0,
-	.udelay			= 40,
+	.udelay			= 10,
 };
 
 static struct platform_device i2c_gpio_device = {
-- 
cgit v0.10.2


From e6171bbe4d5683960221d42c87195cbd366de4bf Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Thu, 5 Jan 2012 11:25:15 +0800
Subject: blackfin: time-ts: rm unused func broadcast_timer_setup()

broadcast_timer_setup() has no user now, drop it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 6efd944..d98f2d6 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -282,24 +282,6 @@ void bfin_coretmr_init(void)
 __attribute__((l1_text))
 #endif
 
-static void broadcast_timer_set_mode(enum clock_event_mode mode,
-		struct clock_event_device *evt)
-{
-}
-
-static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
-{
-	evt->name       = "dummy_timer";
-	evt->features   = CLOCK_EVT_FEAT_ONESHOT |
-		CLOCK_EVT_FEAT_PERIODIC |
-		CLOCK_EVT_FEAT_DUMMY;
-	evt->rating     = 400;
-	evt->mult       = 1;
-	evt->set_mode   = broadcast_timer_set_mode;
-
-	clockevents_register_device(evt);
-}
-
 irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id)
 {
 	int cpu = smp_processor_id();
-- 
cgit v0.10.2


From df864c309d852b2310f105241db3403ae0062aec Mon Sep 17 00:00:00 2001
From: Scott Jiang <scott.jiang.linux@gmail.com>
Date: Sat, 31 Dec 2011 14:08:38 -0500
Subject: blackfin: bf548: add capture support

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 5ea6eca..3ea45f8 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -1183,6 +1183,71 @@ static struct platform_device bf54x_spi_master1 = {
 };
 #endif  /* spi master and devices */
 
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+	P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
+	P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
+	P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
+	0,
+};
+
+static const struct ppi_info ppi_info = {
+	.type = PPI_TYPE_EPPI,
+	.dma_ch = CH_EPPI1,
+	.irq_err = IRQ_EPPI1_ERROR,
+	.base = (void __iomem *)EPPI1_STATUS,
+	.pin_req = ppi_req,
+};
+
+#if defined(CONFIG_VIDEO_VS6624) \
+	|| defined(CONFIG_VIDEO_VS6624_MODULE)
+static struct v4l2_input vs6624_inputs[] = {
+	{
+		.index = 0,
+		.name = "Camera",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_UNKNOWN,
+	},
+};
+
+static struct bcap_route vs6624_routes[] = {
+	{
+		.input = 0,
+		.output = 0,
+	},
+};
+
+static const unsigned vs6624_ce_pin = GPIO_PG6;
+
+static struct bfin_capture_config bfin_capture_data = {
+	.card_name = "BF548",
+	.inputs = vs6624_inputs,
+	.num_inputs = ARRAY_SIZE(vs6624_inputs),
+	.routes = vs6624_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "vs6624",
+		.addr = 0x10,
+		.platform_data = (void *)&vs6624_ce_pin,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (POLC | PACKEN | DLEN_8 | XFR_TYPE | 0x20),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+	.name = "bfin_capture",
+	.dev = {
+		.platform_data = &bfin_capture_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
 	[0] = {
@@ -1506,6 +1571,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bf54x_spi_master0,
 	&bf54x_spi_master1,
 #endif
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+	&bfin_capture_device,
+#endif
 
 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
 	&bf54x_kpad_device,
-- 
cgit v0.10.2


From bd5fd095fb0042614dd0d46e7ef05898121bb5f7 Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Thu, 5 Jan 2012 11:08:30 +0800
Subject: blackfin: bf537: add capture support

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 1b34466..2221173 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1558,6 +1558,71 @@ static struct platform_device bfin_lq035q1_device = {
 };
 #endif
 
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+	P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+	P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+	0,
+};
+
+static const struct ppi_info ppi_info = {
+	.type = PPI_TYPE_PPI,
+	.dma_ch = CH_PPI,
+	.irq_err = IRQ_PPI_ERROR,
+	.base = (void __iomem *)PPI_CONTROL,
+	.pin_req = ppi_req,
+};
+
+#if defined(CONFIG_VIDEO_VS6624) \
+	|| defined(CONFIG_VIDEO_VS6624_MODULE)
+static struct v4l2_input vs6624_inputs[] = {
+	{
+		.index = 0,
+		.name = "Camera",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_UNKNOWN,
+	},
+};
+
+static struct bcap_route vs6624_routes[] = {
+	{
+		.input = 0,
+		.output = 0,
+	},
+};
+
+static const unsigned vs6624_ce_pin = GPIO_PF10;
+
+static struct bfin_capture_config bfin_capture_data = {
+	.card_name = "BF537",
+	.inputs = vs6624_inputs,
+	.num_inputs = ARRAY_SIZE(vs6624_inputs),
+	.routes = vs6624_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "vs6624",
+		.addr = 0x10,
+		.platform_data = (void *)&vs6624_ce_pin,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+	.name = "bfin_capture",
+	.dev = {
+		.platform_data = &bfin_capture_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
@@ -2733,6 +2798,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_lq035q1_device,
 #endif
 
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+	&bfin_capture_device,
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
-- 
cgit v0.10.2


From dda6779f04fe7c6b61846b672b438bc08c2e08ac Mon Sep 17 00:00:00 2001
From: Bob Liu <lliubbo@gmail.com>
Date: Thu, 5 Jan 2012 11:11:20 +0800
Subject: blackfin: bf561: add adv7183 capture support

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index c60638f..8389788 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -422,6 +422,96 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+	P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+	P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+	0,
+};
+
+static const struct ppi_info ppi_info = {
+	.type = PPI_TYPE_PPI,
+	.dma_ch = CH_PPI0,
+	.irq_err = IRQ_PPI1_ERROR,
+	.base = (void __iomem *)PPI0_CONTROL,
+	.pin_req = ppi_req,
+};
+
+#if defined(CONFIG_VIDEO_ADV7183) \
+	|| defined(CONFIG_VIDEO_ADV7183_MODULE)
+#include <media/adv7183.h>
+static struct v4l2_input adv7183_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_ALL,
+	},
+	{
+		.index = 2,
+		.name = "Component",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_ALL,
+	},
+};
+
+static struct bcap_route adv7183_routes[] = {
+	{
+		.input = ADV7183_COMPOSITE4,
+		.output = ADV7183_8BIT_OUT,
+	},
+	{
+		.input = ADV7183_SVIDEO0,
+		.output = ADV7183_8BIT_OUT,
+	},
+	{
+		.input = ADV7183_COMPONENT0,
+		.output = ADV7183_8BIT_OUT,
+	},
+};
+
+
+static const unsigned adv7183_gpio[] = {
+	GPIO_PF13, /* reset pin */
+	GPIO_PF2,  /* output enable pin */
+};
+
+static struct bfin_capture_config bfin_capture_data = {
+	.card_name = "BF561",
+	.inputs = adv7183_inputs,
+	.num_inputs = ARRAY_SIZE(adv7183_inputs),
+	.routes = adv7183_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "adv7183",
+		.addr = 0x20,
+		.platform_data = (void *)adv7183_gpio,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (PACK_EN | DLEN_8 | DMA32 | FLD_SEL),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+	.name = "bfin_capture",
+	.dev = {
+		.platform_data = &bfin_capture_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
@@ -494,6 +584,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&ezkit_flash_device,
 #endif
 
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+	&bfin_capture_device,
+#endif
+
 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
 	&bfin_i2s,
 #endif
-- 
cgit v0.10.2