From 552fe04aa242f164f126abfdb3f6f90fd6679d9f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 5 May 2008 21:21:51 +0300 Subject: PCI: make {pciehp,shpchp}_slot_with_bus static This patch makes the needlessly global {pciehp,shpchp}_slot_with_bus static. Signed-off-by: Adrian Bunk Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 48a2ed3..86d04c6 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -41,7 +41,7 @@ int pciehp_debug; int pciehp_poll_mode; int pciehp_poll_time; int pciehp_force; -int pciehp_slot_with_bus; +static int pciehp_slot_with_bus; struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 9784865..0066b0b 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -39,7 +39,7 @@ int shpchp_debug; int shpchp_poll_mode; int shpchp_poll_time; -int shpchp_slot_with_bus; +static int shpchp_slot_with_bus; struct workqueue_struct *shpchp_wq; #define DRIVER_VERSION "0.4" -- cgit v0.10.2 From 19792a0859f96e9fc8ce87d97b269bcb895389e5 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 5 May 2008 21:25:47 +0300 Subject: PCI: drivers/pci/pci.c: add prototypes This patch adds prototypes for pcibios_disable_device() and pcibios_set_pcie_reset_state() in include/linux/pci.h While I was at it, I also removed the unneeded "extern" from the prototype of pcibios_add_platform_entries(). Signed-off-by: Adrian Bunk Signed-off-by: Jesse Barnes diff --git a/include/linux/pci.h b/include/linux/pci.h index 509159b..aaa9f33 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1059,7 +1059,10 @@ extern int pci_pci_problems; extern unsigned long pci_cardbus_io_size; extern unsigned long pci_cardbus_mem_size; -extern int pcibios_add_platform_entries(struct pci_dev *dev); +int pcibios_add_platform_entries(struct pci_dev *dev); +void pcibios_disable_device(struct pci_dev *dev); +int pcibios_set_pcie_reset_state(struct pci_dev *dev, + enum pcie_reset_state state); #ifdef CONFIG_PCI_MMCONFIG extern void __init pci_mmcfg_early_init(void); -- cgit v0.10.2 From eaf611426d4b9ad0d0a30c0a8d414380128720af Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sun, 11 May 2008 16:58:53 -0400 Subject: PCI: Replace deprecated __initcall with device_initcall. Signed-off-by: Robert P. J. Day Signed-off-by: Jesse Barnes diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 963a976..95eb083 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -482,5 +482,5 @@ static int __init pci_proc_init(void) return 0; } -__initcall(pci_proc_init); +device_initcall(pci_proc_init); -- cgit v0.10.2 From 273c11270d3715c4c06d4df1607a1a60034d887b Mon Sep 17 00:00:00 2001 From: Miklos Vajna Date: Tue, 13 May 2008 18:38:56 +0200 Subject: x86/PCI: janitor work in irq.c Wrapped long lines, removed trailing whitespaces, fixed case indentation inside switch and so. Signed-off-by: Miklos Vajna Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index ca8df9c..c422e10 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -11,8 +11,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include @@ -45,7 +45,8 @@ struct irq_router { char *name; u16 vendor, device; int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq); - int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new); + int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, + int new); }; struct irq_router_handler { @@ -61,7 +62,7 @@ void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; * and perform checksum verification. */ -static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) +static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr) { struct irq_routing_table *rt; int i; @@ -74,10 +75,11 @@ static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) rt->size < sizeof(struct irq_routing_table)) return NULL; sum = 0; - for (i=0; i < rt->size; i++) + for (i = 0; i < rt->size; i++) sum += addr[i]; if (!sum) { - DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt); + DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", + rt); return rt; } return NULL; @@ -100,7 +102,8 @@ static struct irq_routing_table * __init pirq_find_routing_table(void) return rt; printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); } - for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { + for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); + addr += 16) { rt = pirq_check_routing_table(addr); if (rt) return rt; @@ -122,20 +125,23 @@ static void __init pirq_peer_trick(void) struct irq_info *e; memset(busmap, 0, sizeof(busmap)); - for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { + for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / + sizeof(struct irq_info); i++) { e = &rt->slots[i]; #ifdef DEBUG { int j; - DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot); - for(j=0; j<4; j++) - DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap); + DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, + e->devfn/8, e->slot); + for (j = 0; j < 4; j++) + DBG(" %d:%02x/%04x", j, e->irq[j].link, + e->irq[j].bitmap); DBG("\n"); } #endif busmap[e->bus] = 1; } - for(i = 1; i < 256; i++) { + for (i = 1; i < 256; i++) { int node; if (!busmap[i] || pci_find_bus(0, i)) continue; @@ -174,7 +180,8 @@ void eisa_set_level_irq(unsigned int irq) * Common IRQ routing practice: nibbles in config space, * offset by some magic constant. */ -static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) +static unsigned int +read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) { u8 x; unsigned reg = offset + (nr >> 1); @@ -183,7 +190,8 @@ static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, return (nr & 1) ? (x >> 4) : (x & 0xf); } -static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val) +static void write_config_nybble(struct pci_dev *router, unsigned offset, + unsigned nr, unsigned int val) { u8 x; unsigned reg = offset + (nr >> 1); @@ -200,15 +208,18 @@ static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigne */ static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { - static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; + static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, + 11, 0, 12, 0, 14, 0, 15 }; WARN_ON_ONCE(pirq > 16); return irqmap[read_config_nybble(router, 0x48, pirq-1)]; } -static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { - static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 }; + static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, + 3, 9, 11, 0, 13, 15 }; unsigned int val = irqmap[irq]; WARN_ON_ONCE(pirq > 16); @@ -231,7 +242,8 @@ static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return (x < 16) ? x : 0; } -static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { pci_write_config_byte(router, pirq, irq); return 1; @@ -247,7 +259,8 @@ static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq); } -static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq); return 1; @@ -258,7 +271,8 @@ static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i * but without the ugly irq number munging. * However, for 82C586, nibble map is different . */ -static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +static int +pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; @@ -266,7 +280,8 @@ static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq return read_config_nybble(router, 0x55, pirqmap[pirq-1]); } -static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; @@ -285,10 +300,11 @@ static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq) static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; WARN_ON_ONCE(pirq > 4); - return read_config_nybble(router,0x43, pirqmap[pirq-1]); + return read_config_nybble(router, 0x43, pirqmap[pirq-1]); } -static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; @@ -306,7 +322,8 @@ static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return read_config_nybble(router, 0xb8, pirq >> 4); } -static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { write_config_nybble(router, 0xb8, pirq >> 4, irq); return 1; @@ -314,7 +331,7 @@ static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, /* * Cyrix: nibble offset 0x5C - * 0x5C bits 7:4 is INTB bits 3:0 is INTA + * 0x5C bits 7:4 is INTB bits 3:0 is INTA * 0x5D bits 7:4 is INTD bits 3:0 is INTC */ static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) @@ -322,7 +339,8 @@ static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return read_config_nybble(router, 0x5C, (pirq-1)^1); } -static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { write_config_nybble(router, 0x5C, (pirq-1)^1, irq); return 1; @@ -350,7 +368,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * Apparently there are systems implementing PCI routing table using * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D. * We try our best to handle both link mappings. - * + * * Currently (2003-05-21) it appears most SiS chipsets follow the * definition of routing registers from the SiS-5595 southbridge. * According to the SiS 5595 datasheets the revision id's of the @@ -370,7 +388,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * * 0x62: USBIRQ: * bit 6 OHCI function disabled (0), enabled (1) - * + * * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved * * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved @@ -405,7 +423,8 @@ static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK); } -static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { u8 x; int reg; @@ -439,7 +458,8 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq) return read_config_nybble(router, 0x74, pirq-1); } -static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { WARN_ON_ONCE(pirq >= 9); if (pirq > 8) { @@ -461,13 +481,15 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1, * and 0x03 for SMBus. */ -static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +static int +pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { outb(pirq, 0xc00); return inb(0xc01) & 0xf; } -static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, + int pirq, int irq) { outb(pirq, 0xc00); outb(irq, 0xc01); @@ -482,27 +504,27 @@ static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int * offset 0x56 0-3 PIRQA 4-7 PIRQB * offset 0x57 0-3 PIRQC 4-7 PIRQD */ -static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq) +static int +pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { u8 irq; irq = 0; if (pirq <= 4) - { irq = read_config_nybble(router, 0x56, pirq - 1); - } - printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n", + printk(KERN_INFO + "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n", dev->vendor, dev->device, pirq, irq); return irq; } -static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { - printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", + printk(KERN_INFO + "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", dev->vendor, dev->device, pirq, irq); if (pirq <= 4) - { write_config_nybble(router, 0x56, pirq - 1, irq); - } return 1; } @@ -528,7 +550,8 @@ static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, #ifdef CONFIG_PCI_BIOS -static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) +static int +pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { struct pci_dev *bridge; int pin = pci_get_interrupt_pin(dev, &bridge); @@ -537,11 +560,14 @@ static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, #endif -static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { static struct pci_device_id __initdata pirq_440gx[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82443GX_0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82443GX_2) }, { }, }; @@ -549,50 +575,49 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route if (pci_dev_present(pirq_440gx)) return 0; - switch(device) - { - case PCI_DEVICE_ID_INTEL_82371FB_0: - case PCI_DEVICE_ID_INTEL_82371SB_0: - case PCI_DEVICE_ID_INTEL_82371AB_0: - case PCI_DEVICE_ID_INTEL_82371MX: - case PCI_DEVICE_ID_INTEL_82443MX_0: - case PCI_DEVICE_ID_INTEL_82801AA_0: - case PCI_DEVICE_ID_INTEL_82801AB_0: - case PCI_DEVICE_ID_INTEL_82801BA_0: - case PCI_DEVICE_ID_INTEL_82801BA_10: - case PCI_DEVICE_ID_INTEL_82801CA_0: - case PCI_DEVICE_ID_INTEL_82801CA_12: - case PCI_DEVICE_ID_INTEL_82801DB_0: - case PCI_DEVICE_ID_INTEL_82801E_0: - case PCI_DEVICE_ID_INTEL_82801EB_0: - case PCI_DEVICE_ID_INTEL_ESB_1: - case PCI_DEVICE_ID_INTEL_ICH6_0: - case PCI_DEVICE_ID_INTEL_ICH6_1: - case PCI_DEVICE_ID_INTEL_ICH7_0: - case PCI_DEVICE_ID_INTEL_ICH7_1: - case PCI_DEVICE_ID_INTEL_ICH7_30: - case PCI_DEVICE_ID_INTEL_ICH7_31: - case PCI_DEVICE_ID_INTEL_ESB2_0: - case PCI_DEVICE_ID_INTEL_ICH8_0: - case PCI_DEVICE_ID_INTEL_ICH8_1: - case PCI_DEVICE_ID_INTEL_ICH8_2: - case PCI_DEVICE_ID_INTEL_ICH8_3: - case PCI_DEVICE_ID_INTEL_ICH8_4: - case PCI_DEVICE_ID_INTEL_ICH9_0: - case PCI_DEVICE_ID_INTEL_ICH9_1: - case PCI_DEVICE_ID_INTEL_ICH9_2: - case PCI_DEVICE_ID_INTEL_ICH9_3: - case PCI_DEVICE_ID_INTEL_ICH9_4: - case PCI_DEVICE_ID_INTEL_ICH9_5: - case PCI_DEVICE_ID_INTEL_TOLAPAI_0: - case PCI_DEVICE_ID_INTEL_ICH10_0: - case PCI_DEVICE_ID_INTEL_ICH10_1: - case PCI_DEVICE_ID_INTEL_ICH10_2: - case PCI_DEVICE_ID_INTEL_ICH10_3: - r->name = "PIIX/ICH"; - r->get = pirq_piix_get; - r->set = pirq_piix_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_INTEL_82371FB_0: + case PCI_DEVICE_ID_INTEL_82371SB_0: + case PCI_DEVICE_ID_INTEL_82371AB_0: + case PCI_DEVICE_ID_INTEL_82371MX: + case PCI_DEVICE_ID_INTEL_82443MX_0: + case PCI_DEVICE_ID_INTEL_82801AA_0: + case PCI_DEVICE_ID_INTEL_82801AB_0: + case PCI_DEVICE_ID_INTEL_82801BA_0: + case PCI_DEVICE_ID_INTEL_82801BA_10: + case PCI_DEVICE_ID_INTEL_82801CA_0: + case PCI_DEVICE_ID_INTEL_82801CA_12: + case PCI_DEVICE_ID_INTEL_82801DB_0: + case PCI_DEVICE_ID_INTEL_82801E_0: + case PCI_DEVICE_ID_INTEL_82801EB_0: + case PCI_DEVICE_ID_INTEL_ESB_1: + case PCI_DEVICE_ID_INTEL_ICH6_0: + case PCI_DEVICE_ID_INTEL_ICH6_1: + case PCI_DEVICE_ID_INTEL_ICH7_0: + case PCI_DEVICE_ID_INTEL_ICH7_1: + case PCI_DEVICE_ID_INTEL_ICH7_30: + case PCI_DEVICE_ID_INTEL_ICH7_31: + case PCI_DEVICE_ID_INTEL_ESB2_0: + case PCI_DEVICE_ID_INTEL_ICH8_0: + case PCI_DEVICE_ID_INTEL_ICH8_1: + case PCI_DEVICE_ID_INTEL_ICH8_2: + case PCI_DEVICE_ID_INTEL_ICH8_3: + case PCI_DEVICE_ID_INTEL_ICH8_4: + case PCI_DEVICE_ID_INTEL_ICH9_0: + case PCI_DEVICE_ID_INTEL_ICH9_1: + case PCI_DEVICE_ID_INTEL_ICH9_2: + case PCI_DEVICE_ID_INTEL_ICH9_3: + case PCI_DEVICE_ID_INTEL_ICH9_4: + case PCI_DEVICE_ID_INTEL_ICH9_5: + case PCI_DEVICE_ID_INTEL_TOLAPAI_0: + case PCI_DEVICE_ID_INTEL_ICH10_0: + case PCI_DEVICE_ID_INTEL_ICH10_1: + case PCI_DEVICE_ID_INTEL_ICH10_2: + case PCI_DEVICE_ID_INTEL_ICH10_3: + r->name = "PIIX/ICH"; + r->get = pirq_piix_get; + r->set = pirq_piix_set; + return 1; } return 0; } @@ -606,7 +631,7 @@ static __init int via_router_probe(struct irq_router *r, * workarounds for some buggy BIOSes */ if (device == PCI_DEVICE_ID_VIA_82C586_0) { - switch(router->device) { + switch (router->device) { case PCI_DEVICE_ID_VIA_82C686: /* * Asus k7m bios wrongly reports 82C686A @@ -631,7 +656,7 @@ static __init int via_router_probe(struct irq_router *r, } } - switch(device) { + switch (device) { case PCI_DEVICE_ID_VIA_82C586_0: r->name = "VIA"; r->get = pirq_via586_get; @@ -652,88 +677,89 @@ static __init int via_router_probe(struct irq_router *r, return 0; } -static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_VLSI_82C534: - r->name = "VLSI 82C534"; - r->get = pirq_vlsi_get; - r->set = pirq_vlsi_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_VLSI_82C534: + r->name = "VLSI 82C534"; + r->get = pirq_vlsi_get; + r->set = pirq_vlsi_set; + return 1; } return 0; } -static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int serverworks_router_probe(struct irq_router *r, + struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_SERVERWORKS_OSB4: - case PCI_DEVICE_ID_SERVERWORKS_CSB5: - r->name = "ServerWorks"; - r->get = pirq_serverworks_get; - r->set = pirq_serverworks_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_SERVERWORKS_OSB4: + case PCI_DEVICE_ID_SERVERWORKS_CSB5: + r->name = "ServerWorks"; + r->get = pirq_serverworks_get; + r->set = pirq_serverworks_set; + return 1; } return 0; } -static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { if (device != PCI_DEVICE_ID_SI_503) return 0; - + r->name = "SIS"; r->get = pirq_sis_get; r->set = pirq_sis_set; return 1; } -static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_CYRIX_5520: - r->name = "NatSemi"; - r->get = pirq_cyrix_get; - r->set = pirq_cyrix_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_CYRIX_5520: + r->name = "NatSemi"; + r->get = pirq_cyrix_get; + r->set = pirq_cyrix_set; + return 1; } return 0; } -static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_OPTI_82C700: - r->name = "OPTI"; - r->get = pirq_opti_get; - r->set = pirq_opti_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_OPTI_82C700: + r->name = "OPTI"; + r->get = pirq_opti_get; + r->set = pirq_opti_set; + return 1; } return 0; } -static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_ITE_IT8330G_0: - r->name = "ITE"; - r->get = pirq_ite_get; - r->set = pirq_ite_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_ITE_IT8330G_0: + r->name = "ITE"; + r->get = pirq_ite_get; + r->set = pirq_ite_set; + return 1; } return 0; } -static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { + switch (device) { case PCI_DEVICE_ID_AL_M1533: case PCI_DEVICE_ID_AL_M1563: printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n"); @@ -745,28 +771,29 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, return 0; } -static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int +amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_AMD_VIPER_740B: - r->name = "AMD756"; - break; - case PCI_DEVICE_ID_AMD_VIPER_7413: - r->name = "AMD766"; - break; - case PCI_DEVICE_ID_AMD_VIPER_7443: - r->name = "AMD768"; - break; - default: - return 0; + switch (device) { + case PCI_DEVICE_ID_AMD_VIPER_740B: + r->name = "AMD756"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7413: + r->name = "AMD766"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7443: + r->name = "AMD768"; + break; + default: + return 0; } r->get = pirq_amd756_get; r->set = pirq_amd756_set; return 1; } - -static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) + +static __init int +pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { switch (device) { case PCI_DEVICE_ID_PICOPOWER_PT86C523: @@ -807,7 +834,7 @@ static struct pci_dev *pirq_router_dev; * FIXME: should we have an option to say "generic for * chipset" ? */ - + static void __init pirq_find_router(struct irq_router *r) { struct irq_routing_table *rt = pirq_table; @@ -826,7 +853,7 @@ static void __init pirq_find_router(struct irq_router *r) r->name = "default"; r->get = NULL; r->set = NULL; - + DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n", rt->rtr_vendor, rt->rtr_device); @@ -837,12 +864,14 @@ static void __init pirq_find_router(struct irq_router *r) return; } - for( h = pirq_routers; h->vendor; h++) { + for (h = pirq_routers; h->vendor; h++) { /* First look for a router match */ - if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device)) + if (rt->rtr_vendor == h->vendor && + h->probe(r, pirq_router_dev, rt->rtr_device)) break; /* Fall back to a device match */ - if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device)) + if (pirq_router_dev->vendor == h->vendor && + h->probe(r, pirq_router_dev, pirq_router_dev->device)) break; } printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n", @@ -857,11 +886,13 @@ static void __init pirq_find_router(struct irq_router *r) static struct irq_info *pirq_get_info(struct pci_dev *dev) { struct irq_routing_table *rt = pirq_table; - int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); + int entries = (rt->size - sizeof(struct irq_routing_table)) / + sizeof(struct irq_info); struct irq_info *info; for (info = rt->slots; entries--; info++) - if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn)) + if (info->bus == dev->bus->number && + PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn)) return info; return NULL; } @@ -889,7 +920,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) if (!pirq_table) return 0; - + DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin); info = pirq_get_info(dev); if (!info) { @@ -902,7 +933,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) DBG(" -> not routed\n" KERN_DEBUG); return 0; } - DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs); + DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, + pirq_table->exclusive_irqs); mask &= pcibios_irq_mask; /* Work around broken HP Pavilion Notebooks which assign USB to @@ -915,7 +947,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) } /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */ - if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) { + if (acer_tm360_irqrouting && dev->irq == 11 && + dev->vendor == PCI_VENDOR_ID_O2) { pirq = 0x68; mask = 0x400; dev->irq = r->get(pirq_router_dev, dev, pirq); @@ -928,17 +961,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) */ newirq = dev->irq; if (newirq && !((1 << newirq) & mask)) { - if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0; - else printk("\n" KERN_WARNING - "PCI: IRQ %i for device %s doesn't match PIRQ mask " - "- try pci=usepirqmask\n" KERN_DEBUG, newirq, - pci_name(dev)); + if (pci_probe & PCI_USE_PIRQ_MASK) + newirq = 0; + else + printk("\n" KERN_WARNING + "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n" + KERN_DEBUG, newirq, + pci_name(dev)); } if (!newirq && assign) { for (i = 0; i < 16; i++) { if (!(mask & (1 << i))) continue; - if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED)) + if (pirq_penalty[i] < pirq_penalty[newirq] && + can_request_irq(i, IRQF_SHARED)) newirq = i; } } @@ -949,12 +985,13 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) irq = pirq & 0xf; DBG(" -> hardcoded IRQ %d\n", irq); msg = "Hardcoded"; - } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ - ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) { + } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ + ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) { DBG(" -> got IRQ %d\n", irq); msg = "Found"; eisa_set_level_irq(irq); - } else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { + } else if (newirq && r->set && + (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { DBG(" -> assigning IRQ %d", newirq); if (r->set(pirq_router_dev, dev, pirq, newirq)) { eisa_set_level_irq(newirq); @@ -972,7 +1009,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) } else return 0; } - printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev)); + printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, + pci_name(dev)); /* Update IRQ for all devices with the same pirq value */ while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) { @@ -984,20 +1022,26 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) if (!info) continue; if (info->irq[pin].link == pirq) { - /* We refuse to override the dev->irq information. Give a warning! */ - if ( dev2->irq && dev2->irq != irq && \ + /* + * We refuse to override the dev->irq + * information. Give a warning! + */ + if (dev2->irq && dev2->irq != irq && \ (!(pci_probe & PCI_USE_PIRQ_MASK) || \ - ((1 << dev2->irq) & mask)) ) { + ((1 << dev2->irq) & mask))) { #ifndef CONFIG_PCI_MSI - printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n", - pci_name(dev2), dev2->irq, irq); + printk(KERN_INFO + "IRQ routing conflict for %s, have irq %d, want irq %d\n", + pci_name(dev2), dev2->irq, irq); #endif - continue; - } + continue; + } dev2->irq = irq; pirq_penalty[irq]++; if (dev != dev2) - printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2)); + printk(KERN_INFO + "PCI: Sharing IRQ %d with %s\n", + irq, pci_name(dev2)); } } return 1; @@ -1011,15 +1055,21 @@ static void __init pcibios_fixup_irqs(void) DBG(KERN_DEBUG "PCI: IRQ fixup\n"); while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { /* - * If the BIOS has set an out of range IRQ number, just ignore it. - * Also keep track of which IRQ's are already in use. + * If the BIOS has set an out of range IRQ number, just + * ignore it. Also keep track of which IRQ's are + * already in use. */ if (dev->irq >= 16) { - DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq); + DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", + pci_name(dev), dev->irq); dev->irq = 0; } - /* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */ - if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000) + /* + * If the IRQ is already assigned to a PCI device, + * ignore its ISA use penalty + */ + if (pirq_penalty[dev->irq] >= 100 && + pirq_penalty[dev->irq] < 100000) pirq_penalty[dev->irq] = 0; pirq_penalty[dev->irq]++; } @@ -1031,31 +1081,40 @@ static void __init pcibios_fixup_irqs(void) /* * Recalculate IRQ numbers if we use the I/O APIC. */ - if (io_apic_assign_pci_irqs) - { + if (io_apic_assign_pci_irqs) { int irq; if (pin) { - pin--; /* interrupt pins are numbered starting from 1 */ - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin); + /* + * interrupt pins are numbered starting + * from 1 + */ + pin--; + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, + PCI_SLOT(dev->devfn), pin); /* * Busses behind bridges are typically not listed in the MP-table. * In this case we have to look up the IRQ based on the parent bus, * parent slot, and pin number. The SMP code detects such bridged * busses itself so we should get into this branch reliably. */ - if (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev * bridge = dev->bus->self; + if (irq < 0 && dev->bus->parent) { + /* go back to the bridge */ + struct pci_dev *bridge = dev->bus->self; pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, - PCI_SLOT(bridge->devfn), pin); + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + PCI_SLOT(bridge->devfn), + pin); if (irq >= 0) - printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", - pci_name(bridge), 'A' + pin, irq); + printk(KERN_WARNING + "PCI: using PPB %s[%c] to get irq %d\n", + pci_name(bridge), + 'A' + pin, irq); } if (irq >= 0) { - printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", + printk(KERN_INFO + "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", pci_name(dev), 'A' + pin, irq); dev->irq = irq; } @@ -1078,7 +1137,8 @@ static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d) { if (!broken_hp_bios_irq9) { broken_hp_bios_irq9 = 1; - printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident); + printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", + d->ident); } return 0; } @@ -1091,7 +1151,8 @@ static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d) { if (!acer_tm360_irqrouting) { acer_tm360_irqrouting = 1; - printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident); + printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", + d->ident); } return 0; } @@ -1103,7 +1164,8 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"), - DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"), + DMI_MATCH(DMI_PRODUCT_VERSION, + "HP Pavilion Notebook Model GE"), DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), }, }, @@ -1138,11 +1200,14 @@ static int __init pcibios_irq_init(void) pirq_find_router(&pirq_router); if (pirq_table->exclusive_irqs) { int i; - for (i=0; i<16; i++) + for (i = 0; i < 16; i++) if (!(pirq_table->exclusive_irqs & (1 << i))) pirq_penalty[i] += 100; } - /* If we're using the I/O APIC, avoid using the PCI IRQ routing table */ + /* + * If we're using the I/O APIC, avoid using the PCI IRQ + * routing table + */ if (io_apic_assign_pci_irqs) pirq_table = NULL; } @@ -1189,33 +1254,40 @@ static int pirq_enable_irq(struct pci_dev *dev) if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) { char *msg = ""; - pin--; /* interrupt pins are numbered starting from 1 */ + pin--; /* interrupt pins are numbered starting from 1 */ if (io_apic_assign_pci_irqs) { int irq; - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin); + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, + PCI_SLOT(dev->devfn), pin); /* - * Busses behind bridges are typically not listed in the MP-table. - * In this case we have to look up the IRQ based on the parent bus, - * parent slot, and pin number. The SMP code detects such bridged - * busses itself so we should get into this branch reliably. + * Busses behind bridges are typically not + * listed in the MP-table. In this case we have + * to look up the IRQ based on the parent bus, + * parent slot, and pin number. The SMP code + * detects such bridged busses itself so we + * should get into this branch reliably. */ temp_dev = dev; - while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev * bridge = dev->bus->self; + while (irq < 0 && dev->bus->parent) { + /* go back to the bridge */ + struct pci_dev *bridge = dev->bus->self; pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), pin); if (irq >= 0) - printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", - pci_name(bridge), 'A' + pin, irq); + printk(KERN_WARNING + "PCI: using PPB %s[%c] to get irq %d\n", + pci_name(bridge), + 'A' + pin, irq); dev = bridge; } dev = temp_dev; if (irq >= 0) { - printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", + printk(KERN_INFO + "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n", pci_name(dev), 'A' + pin, irq); dev->irq = irq; return 0; @@ -1226,12 +1298,17 @@ static int pirq_enable_irq(struct pci_dev *dev) else msg = " Please try using pci=biosirq."; - /* With IDE legacy devices the IRQ lookup failure is not a problem.. */ - if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5)) + /* + * With IDE legacy devices the IRQ lookup failure is not + * a problem.. + */ + if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && + !(dev->class & 0x5)) return 0; - printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n", - 'A' + pin, pci_name(dev), msg); + printk(KERN_WARNING + "PCI: No IRQ known for interrupt pin %c of device %s.%s\n", + 'A' + pin, pci_name(dev), msg); } return 0; } -- cgit v0.10.2 From e1a2a51e684bfe9d6165992d4a065439617a3107 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 15 May 2008 21:51:31 +0200 Subject: Suspend/Resume bug in PCI layer wrt quirks Some quirks should be called with interrupt disabled, we can't directly call them in .resume_early. Also the patch introduces pci_fixup_resume_early and pci_fixup_suspend, which matches current device core callbacks (.suspend/.resume_early). TBD: Somebody knows why we need quirk resume should double check if a quirk should be called in resume or resume_early. I changed some per my understanding, but can't make sure I fixed all. Signed-off-by: Shaohua Li Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 72cf61e..677fd9d 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -292,6 +292,9 @@ static int pci_device_suspend(struct device * dev, pm_message_t state) if (pci_dev->current_state == PCI_D0) pci_dev->current_state = PCI_UNKNOWN; } + + pci_fixup_device(pci_fixup_suspend, pci_dev); + return i; } @@ -337,6 +340,7 @@ static int pci_device_resume(struct device * dev) error = drv->resume(pci_dev); else error = pci_default_resume(pci_dev); + pci_fixup_device(pci_fixup_resume, pci_dev); return error; } @@ -346,7 +350,7 @@ static int pci_device_resume_early(struct device * dev) struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; - pci_fixup_device(pci_fixup_resume, pci_dev); + pci_fixup_device(pci_fixup_resume_early, pci_dev); if (drv && drv->resume_early) error = drv->resume_early(pci_dev); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index dabb563..44aabb1 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -556,7 +556,7 @@ static void quirk_via_ioapic(struct pci_dev *dev) pci_write_config_byte (dev, 0x58, tmp); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); /* * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit. @@ -576,7 +576,7 @@ static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); /* * The AMD io apic can hang the box when an apic irq is masked. @@ -622,7 +622,7 @@ static void quirk_amd_8131_ioapic(struct pci_dev *dev) } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); #endif /* CONFIG_X86_IO_APIC */ /* @@ -774,7 +774,7 @@ static void quirk_cardbus_legacy(struct pci_dev *dev) pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); } DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); -DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); /* * Following the PCI ordering rules is optional on the AMD762. I'm not @@ -797,7 +797,7 @@ static void quirk_amd_ordering(struct pci_dev *dev) } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); /* * DreamWorks provided workaround for Dunord I-3000 problem @@ -865,7 +865,7 @@ static void quirk_disable_pxb(struct pci_dev *pdev) } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev) { @@ -885,9 +885,9 @@ static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev) } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); /* * Serverworks CSB5 IDE does not fully support native mode @@ -1093,31 +1093,61 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asu DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); -static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) +/* It appears we just have one such device. If not, we have a warning */ +static void __iomem *asus_rcba_base; +static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) { - u32 val, rcba; - void __iomem *base; + u32 rcba; if (likely(!asus_hides_smbus)) return; + WARN_ON(asus_rcba_base); + pci_read_config_dword(dev, 0xF0, &rcba); - base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); /* use bits 31:14, 16 kB aligned */ - if (base == NULL) return; - val=readl(base + 0x3418); /* read the Function Disable register, dword mode only */ - writel(val & 0xFFFFFFF7, base + 0x3418); /* enable the SMBus device */ - iounmap(base); + /* use bits 31:14, 16 kB aligned */ + asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); + if (asus_rcba_base == NULL) + return; +} + +static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) +{ + u32 val; + + if (likely(!asus_hides_smbus || !asus_rcba_base)) + return; + /* read the Function Disable register, dword mode only */ + val = readl(asus_rcba_base + 0x3418); + writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ +} + +static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) +{ + if (likely(!asus_hides_smbus || !asus_rcba_base)) + return; + iounmap(asus_rcba_base); + asus_rcba_base = NULL; dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); } + +static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) +{ + asus_hides_smbus_lpc_ich6_suspend(dev); + asus_hides_smbus_lpc_ich6_resume_early(dev); + asus_hides_smbus_lpc_ich6_resume(dev); +} DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); /* * SiS 96x south bridge: BIOS typically hides SMBus device... @@ -1135,10 +1165,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); /* * ... This is further complicated by the fact that some SiS96x south @@ -1172,7 +1202,7 @@ static void quirk_sis_503(struct pci_dev *dev) quirk_sis_96x_smbus(dev); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); /* @@ -1205,7 +1235,7 @@ static void asus_hides_ac97_lpc(struct pci_dev *dev) } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) @@ -1270,12 +1300,12 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, qui DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); #endif @@ -1521,6 +1551,10 @@ extern struct pci_fixup __start_pci_fixups_enable[]; extern struct pci_fixup __end_pci_fixups_enable[]; extern struct pci_fixup __start_pci_fixups_resume[]; extern struct pci_fixup __end_pci_fixups_resume[]; +extern struct pci_fixup __start_pci_fixups_resume_early[]; +extern struct pci_fixup __end_pci_fixups_resume_early[]; +extern struct pci_fixup __start_pci_fixups_suspend[]; +extern struct pci_fixup __end_pci_fixups_suspend[]; void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) @@ -1553,6 +1587,16 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) end = __end_pci_fixups_resume; break; + case pci_fixup_resume_early: + start = __start_pci_fixups_resume_early; + end = __end_pci_fixups_resume_early; + break; + + case pci_fixup_suspend: + start = __start_pci_fixups_suspend; + end = __end_pci_fixups_suspend; + break; + default: /* stupid compiler warning, you would think with an enum... */ return; @@ -1629,7 +1673,7 @@ static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_pcie_aer_ext_cap); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_pcie_aer_ext_cap); static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index f054778..cf108a3 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -84,6 +84,12 @@ VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \ *(.pci_fixup_resume) \ VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \ + VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \ + *(.pci_fixup_resume_early) \ + VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \ + VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \ + *(.pci_fixup_suspend) \ + VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \ } \ \ /* RapidIO route ops */ \ diff --git a/include/linux/pci.h b/include/linux/pci.h index aaa9f33..700704e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1013,7 +1013,9 @@ enum pci_fixup_pass { pci_fixup_header, /* After reading configuration header */ pci_fixup_final, /* Final phase of device fixups */ pci_fixup_enable, /* pci_enable_device() time */ - pci_fixup_resume, /* pci_enable_device() time */ + pci_fixup_resume, /* pci_device_resume() */ + pci_fixup_suspend, /* pci_device_suspend */ + pci_fixup_resume_early, /* pci_device_resume_early() */ }; /* Anonymous variables would be nice... */ @@ -1035,6 +1037,12 @@ enum pci_fixup_pass { #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ resume##vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ + resume_early##vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ + suspend##vendor##device##hook, vendor, device, hook) void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); -- cgit v0.10.2 From 49db139955d3392c6c4facf987905d0a9afed581 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 13 May 2008 11:15:05 +0800 Subject: PCI: Disable PME during PCI scan If a device supports #PME and can generate PME events from D0, we may see superfluous events before a driver is loaded (drivers should only enable PME as needed), preventing suspend from working if the corresponding GPE was enabled. Likewise, if the ACPI device has the _PRW object, the _PSW/_DSW object will be called in order to disable the wakeup functionality. But when it is allowed to wake up the sleeping state, OSPM will enable it again. So we should disable PME in the course of scanning PCI devices and enable it again only when PME events are actually required to be generated from the requested PCI state (for example, D3_hot or D3_cold). It is also safe to disable PME again when the PME is disabled for the PCI devices. Signed-off-by: Zhao Yakui Signed-off-by: Li Shaohua Signed-off-by: Jesse Barnes diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 3706ce7..aebab71 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -857,6 +857,49 @@ int pci_cfg_space_size_ext(struct pci_dev *dev) return PCI_CFG_SPACE_SIZE; } +/** + * pci_disable_pme - Disable the PME function of PCI device + * @dev: PCI device affected + * -EINVAL is returned if PCI device doesn't support PME. + * Zero is returned if the PME is supported and can be disabled. + */ +static int pci_disable_pme(struct pci_dev *dev) +{ + int pm; + u16 value; + + /* find PCI PM capability in list */ + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + + /* If device doesn't support PM Capabilities, it means that PME is + * not supported. + */ + if (!pm) + return -EINVAL; + /* Check device's ability to generate PME# */ + pci_read_config_word(dev, pm + PCI_PM_PMC, &value); + + value &= PCI_PM_CAP_PME_MASK; + /* Check if it can generate PME# */ + if (!value) { + /* + * If it is zero, it means that PME is still unsupported + * although there exists the PM capability. + */ + return -EINVAL; + } + + pci_read_config_word(dev, pm + PCI_PM_CTRL, &value); + + /* Clear PME_Status by writing 1 to it */ + value |= PCI_PM_CTRL_PME_STATUS ; + /* Disable PME enable bit */ + value &= ~PCI_PM_CTRL_PME_ENABLE; + pci_write_config_word(dev, pm + PCI_PM_CTRL, value); + + return 0; +} + int pci_cfg_space_size(struct pci_dev *dev) { int pos; @@ -964,6 +1007,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) } pci_vpd_pci22_init(dev); + pci_disable_pme(dev); return dev; } -- cgit v0.10.2 From 8a7a4faf96eef8c87421be0d3f33ea036804289b Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 15 May 2008 15:18:53 +0900 Subject: pci-acpi: remove duplicate code for _OSC Remove the duplicated code in acpi_query_osc() and acpi_run_osc(). It simplifies the code very much. Signed-off-by: Kenji Kaneshige Acked-by: Shaohua Li Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 9d6fc8e..032b326 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -46,40 +46,15 @@ static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle) static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40, 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66}; -static acpi_status -acpi_query_osc ( - acpi_handle handle, - u32 level, - void *context, - void **retval ) +static acpi_status acpi_run_osc(acpi_handle handle, + struct acpi_osc_data *osc_data) { - acpi_status status; - struct acpi_object_list input; - union acpi_object in_params[4]; - struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object *out_obj; - u32 osc_dw0; - acpi_status *ret_status = (acpi_status *)retval; - struct acpi_osc_data *osc_data; - u32 flags = (unsigned long)context, temp; - acpi_handle tmp; - - status = acpi_get_handle(handle, "_OSC", &tmp); - if (ACPI_FAILURE(status)) - return status; - - osc_data = acpi_get_osc_data(handle); - if (!osc_data) { - printk(KERN_ERR "acpi osc data array is full\n"); - return AE_ERROR; - } - - osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS); - - /* do _OSC query for all possible controls */ - temp = osc_data->ctrlset_buf[OSC_CONTROL_TYPE]; - osc_data->ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; - osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS; + acpi_status status; + struct acpi_object_list input; + union acpi_object in_params[4]; + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *out_obj; + u32 osc_dw0, flags = osc_data->ctrlset_buf[OSC_QUERY_TYPE]; /* Setting up input parameters */ input.count = 4; @@ -97,14 +72,13 @@ acpi_query_osc ( status = acpi_evaluate_object(handle, "_OSC", &input, &output); if (ACPI_FAILURE(status)) - goto out_nofree; - out_obj = output.pointer; + return status; + out_obj = output.pointer; if (out_obj->type != ACPI_TYPE_BUFFER) { - printk(KERN_DEBUG - "Evaluate _OSC returns wrong type\n"); + printk(KERN_DEBUG "Evaluate _OSC returns wrong type\n"); status = AE_TYPE; - goto query_osc_out; + goto out_kfree; } osc_dw0 = *((u32 *) out_obj->buffer.pointer); if (osc_dw0) { @@ -115,93 +89,64 @@ acpi_query_osc ( if (osc_dw0 & OSC_INVALID_REVISION_ERROR) printk(KERN_DEBUG "_OSC invalid revision\n"); if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) { - /* Update Global Control Set */ - osc_data->global_ctrlsets = - *((u32 *)(out_obj->buffer.pointer + 8)); - status = AE_OK; - goto query_osc_out; + if (flags & OSC_QUERY_ENABLE) + goto out_success; + printk(KERN_DEBUG "_OSC FW not grant req. control\n"); + status = AE_SUPPORT; + goto out_kfree; } status = AE_ERROR; - goto query_osc_out; + goto out_kfree; + } +out_success: + if (flags & OSC_QUERY_ENABLE) { + /* Update Global Control Set */ + osc_data->global_ctrlsets = + *((u32 *)(out_obj->buffer.pointer + 8)); } - - /* Update Global Control Set */ - osc_data->global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8)); status = AE_OK; -query_osc_out: +out_kfree: kfree(output.pointer); -out_nofree: - *ret_status = status; - - osc_data->ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE; - osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = temp; - if (ACPI_FAILURE(status)) { - /* no osc support at all */ - osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] = 0; - } - return status; } - -static acpi_status -acpi_run_osc ( - acpi_handle handle, - void *context) +static acpi_status acpi_query_osc(acpi_handle handle, + u32 level, void *context, void **retval) { - acpi_status status; - struct acpi_object_list input; - union acpi_object in_params[4]; - struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object *out_obj; - u32 osc_dw0; - - /* Setting up input parameters */ - input.count = 4; - input.pointer = in_params; - in_params[0].type = ACPI_TYPE_BUFFER; - in_params[0].buffer.length = 16; - in_params[0].buffer.pointer = OSC_UUID; - in_params[1].type = ACPI_TYPE_INTEGER; - in_params[1].integer.value = 1; - in_params[2].type = ACPI_TYPE_INTEGER; - in_params[2].integer.value = 3; - in_params[3].type = ACPI_TYPE_BUFFER; - in_params[3].buffer.length = 12; - in_params[3].buffer.pointer = (u8 *)context; + acpi_status status; + acpi_status *ret_status = (acpi_status *)retval; + struct acpi_osc_data *osc_data; + u32 flags = (unsigned long)context, temp; + acpi_handle tmp; - status = acpi_evaluate_object(handle, "_OSC", &input, &output); - if (ACPI_FAILURE (status)) + status = acpi_get_handle(handle, "_OSC", &tmp); + if (ACPI_FAILURE(status)) return status; - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_BUFFER) { - printk(KERN_DEBUG - "Evaluate _OSC returns wrong type\n"); - status = AE_TYPE; - goto run_osc_out; + osc_data = acpi_get_osc_data(handle); + if (!osc_data) { + printk(KERN_ERR "acpi osc data array is full\n"); + return AE_ERROR; } - osc_dw0 = *((u32 *) out_obj->buffer.pointer); - if (osc_dw0) { - if (osc_dw0 & OSC_REQUEST_ERROR) - printk(KERN_DEBUG "_OSC request fails\n"); - if (osc_dw0 & OSC_INVALID_UUID_ERROR) - printk(KERN_DEBUG "_OSC invalid UUID\n"); - if (osc_dw0 & OSC_INVALID_REVISION_ERROR) - printk(KERN_DEBUG "_OSC invalid revision\n"); - if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) { - printk(KERN_DEBUG "_OSC FW not grant req. control\n"); - status = AE_SUPPORT; - goto run_osc_out; - } - status = AE_ERROR; - goto run_osc_out; + + osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS); + + /* do _OSC query for all possible controls */ + temp = osc_data->ctrlset_buf[OSC_CONTROL_TYPE]; + osc_data->ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; + osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS; + + status = acpi_run_osc(handle, osc_data); + *ret_status = status; + + osc_data->ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE; + osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = temp; + if (ACPI_FAILURE(status)) { + /* no osc support at all */ + osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] = 0; } - status = AE_OK; -run_osc_out: - kfree(output.pointer); return status; } @@ -260,7 +205,7 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) return AE_SUPPORT; } osc_data->ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset; - status = acpi_run_osc(handle, osc_data->ctrlset_buf); + status = acpi_run_osc(handle, osc_data); if (ACPI_FAILURE (status)) { osc_data->ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset; } -- cgit v0.10.2 From 5e0b9947452c824d66fafe728a46312cff544a7f Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 15 May 2008 15:20:11 +0900 Subject: pci-acpi: use local buffer for _OSC Current pci-acpi implementation uses array in osc_data directly to evaluate _OSC. It needs to save the old data and restore it if _OSC evaluation fails. To make it more robust, we should use local array to evaluate _OSC. Signed-off-by: Kenji Kaneshige Acked-by: Shaohua Li Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 032b326..b1bd6e6 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -21,12 +21,18 @@ struct acpi_osc_data { acpi_handle handle; - u32 ctrlset_buf[3]; - u32 global_ctrlsets; + u32 support_set; + u32 control_set; + u32 query_result; struct list_head sibiling; }; static LIST_HEAD(acpi_osc_data_list); +struct acpi_osc_args { + u32 capbuf[3]; + u32 query_result; +}; + static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle) { struct acpi_osc_data *data; @@ -47,14 +53,14 @@ static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle) static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40, 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66}; static acpi_status acpi_run_osc(acpi_handle handle, - struct acpi_osc_data *osc_data) + struct acpi_osc_args *osc_args) { acpi_status status; struct acpi_object_list input; union acpi_object in_params[4]; struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *out_obj; - u32 osc_dw0, flags = osc_data->ctrlset_buf[OSC_QUERY_TYPE]; + u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE]; /* Setting up input parameters */ input.count = 4; @@ -68,7 +74,7 @@ static acpi_status acpi_run_osc(acpi_handle handle, in_params[2].integer.value = 3; in_params[3].type = ACPI_TYPE_BUFFER; in_params[3].buffer.length = 12; - in_params[3].buffer.pointer = (u8 *)osc_data->ctrlset_buf; + in_params[3].buffer.pointer = (u8 *)osc_args->capbuf; status = acpi_evaluate_object(handle, "_OSC", &input, &output); if (ACPI_FAILURE(status)) @@ -99,11 +105,9 @@ static acpi_status acpi_run_osc(acpi_handle handle, goto out_kfree; } out_success: - if (flags & OSC_QUERY_ENABLE) { - /* Update Global Control Set */ - osc_data->global_ctrlsets = + if (flags & OSC_QUERY_ENABLE) + osc_args->query_result = *((u32 *)(out_obj->buffer.pointer + 8)); - } status = AE_OK; out_kfree: @@ -117,8 +121,9 @@ static acpi_status acpi_query_osc(acpi_handle handle, acpi_status status; acpi_status *ret_status = (acpi_status *)retval; struct acpi_osc_data *osc_data; - u32 flags = (unsigned long)context, temp; + u32 flags = (unsigned long)context, support_set; acpi_handle tmp; + struct acpi_osc_args osc_args; status = acpi_get_handle(handle, "_OSC", &tmp); if (ACPI_FAILURE(status)) @@ -130,21 +135,18 @@ static acpi_status acpi_query_osc(acpi_handle handle, return AE_ERROR; } - osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS); - /* do _OSC query for all possible controls */ - temp = osc_data->ctrlset_buf[OSC_CONTROL_TYPE]; - osc_data->ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; - osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS; + support_set = osc_data->support_set | (flags & OSC_SUPPORT_MASKS); + osc_args.capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; + osc_args.capbuf[OSC_SUPPORT_TYPE] = support_set; + osc_args.capbuf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS; - status = acpi_run_osc(handle, osc_data); + status = acpi_run_osc(handle, &osc_args); *ret_status = status; - osc_data->ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE; - osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = temp; - if (ACPI_FAILURE(status)) { - /* no osc support at all */ - osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] = 0; + if (ACPI_SUCCESS(status)) { + osc_data->support_set = support_set; + osc_data->query_result = osc_args.query_result; } return status; @@ -181,10 +183,11 @@ acpi_status __pci_osc_support_set(u32 flags, const char *hid) **/ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) { - acpi_status status; - u32 ctrlset; + acpi_status status; + u32 ctrlset, control_set; acpi_handle tmp; struct acpi_osc_data *osc_data; + struct acpi_osc_args osc_args; status = acpi_get_handle(handle, "_OSC", &tmp); if (ACPI_FAILURE(status)) @@ -197,19 +200,21 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) } ctrlset = (flags & OSC_CONTROL_MASKS); - if (!ctrlset) { + if (!ctrlset) return AE_TYPE; - } - if (osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] && - ((osc_data->global_ctrlsets & ctrlset) != ctrlset)) { + + if (osc_data->support_set && + ((osc_data->query_result & ctrlset) != ctrlset)) return AE_SUPPORT; - } - osc_data->ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset; - status = acpi_run_osc(handle, osc_data); - if (ACPI_FAILURE (status)) { - osc_data->ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset; - } - + + control_set = osc_data->control_set | ctrlset; + osc_args.capbuf[OSC_QUERY_TYPE] = 0; + osc_args.capbuf[OSC_SUPPORT_TYPE] = osc_data->support_set; + osc_args.capbuf[OSC_CONTROL_TYPE] = control_set; + status = acpi_run_osc(handle, &osc_args); + if (ACPI_SUCCESS(status)) + osc_data->control_set = control_set; + return status; } EXPORT_SYMBOL(pci_osc_control_set); -- cgit v0.10.2 From 681f7d9db58d2b6dc3c3b784d6815f86a53b6ba0 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 15 May 2008 15:21:16 +0900 Subject: pci-acpi: add flag to indicate query had been done Current pci-acpi implementation checks osc_data->support_stat to see if control bits had been already queried. It is not good from the viewpoint of easy understanding. So this patch adds new 'is_queried' flag to indicate query had been done. Signed-off-by: Kenji Kaneshige Acked-by: Shaohua Li Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index b1bd6e6..9510218 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -23,6 +23,7 @@ struct acpi_osc_data { acpi_handle handle; u32 support_set; u32 control_set; + int is_queried; u32 query_result; struct list_head sibiling; }; @@ -147,6 +148,7 @@ static acpi_status acpi_query_osc(acpi_handle handle, if (ACPI_SUCCESS(status)) { osc_data->support_set = support_set; osc_data->query_result = osc_args.query_result; + osc_data->is_queried = 1; } return status; @@ -203,7 +205,7 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) if (!ctrlset) return AE_TYPE; - if (osc_data->support_set && + if (osc_data->is_queried && ((osc_data->query_result & ctrlset) != ctrlset)) return AE_SUPPORT; -- cgit v0.10.2 From c155062d6ebed676f62761f90c62894a97816932 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 15 May 2008 15:22:35 +0900 Subject: pci-acpi: remove unused variable in __pci_osc_support_set The 'retval' variable in __pci_osc_support_set() is no longer used. Remove this unused variable. Signed-off-by: Kenji Kaneshige Acked-by: Shaohua Li Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 9510218..3f27999 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -120,7 +120,6 @@ static acpi_status acpi_query_osc(acpi_handle handle, u32 level, void *context, void **retval) { acpi_status status; - acpi_status *ret_status = (acpi_status *)retval; struct acpi_osc_data *osc_data; u32 flags = (unsigned long)context, support_set; acpi_handle tmp; @@ -143,8 +142,6 @@ static acpi_status acpi_query_osc(acpi_handle handle, osc_args.capbuf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS; status = acpi_run_osc(handle, &osc_args); - *ret_status = status; - if (ACPI_SUCCESS(status)) { osc_data->support_set = support_set; osc_data->query_result = osc_args.query_result; @@ -164,15 +161,11 @@ static acpi_status acpi_query_osc(acpi_handle handle, **/ acpi_status __pci_osc_support_set(u32 flags, const char *hid) { - acpi_status retval = AE_NOT_FOUND; - - if (!(flags & OSC_SUPPORT_MASKS)) { + if (!(flags & OSC_SUPPORT_MASKS)) return AE_TYPE; - } - acpi_get_devices(hid, - acpi_query_osc, - (void *)(unsigned long)flags, - (void **) &retval ); + + acpi_get_devices(hid, acpi_query_osc, + (void *)(unsigned long)flags, NULL); return AE_OK; } -- cgit v0.10.2 From 90a57dab6a2bce7f2ef186fe2d07a84d14a2a625 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 15 May 2008 15:23:13 +0900 Subject: pci-acpi: formatting cleanups for _OSC Minor cleanup in pci-acpi.c. Signed-off-by: Kenji Kaneshige Acked-by: Shaohua Li Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 3f27999..5f96b86 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -51,7 +51,8 @@ static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle) return data; } -static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40, 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66}; +static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40, + 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66}; static acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_args *osc_args) @@ -87,7 +88,7 @@ static acpi_status acpi_run_osc(acpi_handle handle, status = AE_TYPE; goto out_kfree; } - osc_dw0 = *((u32 *) out_obj->buffer.pointer); + osc_dw0 = *((u32 *)out_obj->buffer.pointer); if (osc_dw0) { if (osc_dw0 & OSC_REQUEST_ERROR) printk(KERN_DEBUG "_OSC request fails\n"); -- cgit v0.10.2 From cf35e4ad57b4c39a4c74921e20e48ec0dbeb14f4 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 01:02:06 +0300 Subject: PCI: remove CVS keywords This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e4548ab..15beaf4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1,6 +1,4 @@ /* - * $Id: pci.c,v 1.91 1999/01/21 13:34:01 davem Exp $ - * * PCI Bus Services, see include/linux/pci.h for further explanation. * * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter, diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 95eb083..4400dff 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -1,6 +1,4 @@ /* - * $Id: proc.c,v 1.13 1998/05/12 07:36:07 mj Exp $ - * * Procfs interface for the PCI bus. * * Copyright (c) 1997--1999 Martin Mares -- cgit v0.10.2 From 5ca5c02f0e81c094c19d30dc0d13be4e929a994a Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Mon, 19 May 2008 13:48:17 +0900 Subject: PCI/MSI: skip calling pci_find_capability from msi_set_mask_bits The position of MSI capability is already cached in the msi_desc when we enter the msi_set_mask_bits(). Use it instead. Signed-off-by: Hidetoshi Seto Acked-by: Arnaldo Carvalho de Melo Signed-off-by: Jesse Barnes diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 8c61304..ccb1974 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -70,12 +70,10 @@ arch_teardown_msi_irqs(struct pci_dev *dev) } } -static void msi_set_enable(struct pci_dev *dev, int enable) +static void __msi_set_enable(struct pci_dev *dev, int pos, int enable) { - int pos; u16 control; - pos = pci_find_capability(dev, PCI_CAP_ID_MSI); if (pos) { pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); control &= ~PCI_MSI_FLAGS_ENABLE; @@ -85,6 +83,11 @@ static void msi_set_enable(struct pci_dev *dev, int enable) } } +static void msi_set_enable(struct pci_dev *dev, int enable) +{ + __msi_set_enable(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), enable); +} + static void msix_set_enable(struct pci_dev *dev, int enable) { int pos; @@ -141,7 +144,8 @@ static void msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag) mask_bits |= flag & mask; pci_write_config_dword(entry->dev, pos, mask_bits); } else { - msi_set_enable(entry->dev, !flag); + __msi_set_enable(entry->dev, entry->msi_attrib.pos, + !flag); } break; case PCI_CAP_ID_MSIX: -- cgit v0.10.2 From bb71ad880204b79d60331d3384103976e086cb9f Mon Sep 17 00:00:00 2001 From: Gary Hade Date: Mon, 12 May 2008 13:57:46 -0700 Subject: PCI: boot parameter to avoid expansion ROM memory allocation Contention for scarce PCI memory resources has been growing due to an increasing number of PCI slots in large multi-node systems. The kernel currently attempts by default to allocate memory for all PCI expansion ROMs so there has also been an increasing number of PCI memory allocation failures seen on these systems. This occurs because the BIOS either (1) provides insufficient PCI memory resource for all the expansion ROMs or (2) provides adequate PCI memory resource for expansion ROMs but provides the space in kernel unexpected BIOS assigned P2P non-prefetch windows. The resulting PCI memory allocation failures may be benign when related to memory requests for expansion ROMs themselves but in some cases they can occur when attempting to allocate space for more critical BARs. This can happen when a successful expansion ROM allocation request consumes memory resource that was intended for a non-ROM BAR. We have seen this happen during PCI hotplug of an adapter that contains a P2P bridge where successful memory allocation for an expansion ROM BAR on device behind the bridge consumed memory that was intended for a non-ROM BAR on the P2P bridge. In all cases the allocation failure messages can be very confusing for users. This patch provides a new 'pci=norom' kernel boot parameter that can be used to disable the default PCI expansion ROM memory resource allocation. This provides a way to avoid the above described issues on systems that do not contain PCI devices for which drivers or user-level applications depend on the default PCI expansion ROM memory resource allocation behavior. Signed-off-by: Gary Hade Signed-off-by: Jesse Barnes diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e07c432..9cf7b34 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1496,6 +1496,9 @@ and is between 256 and 4096 characters. It is defined in the file Use with caution as certain devices share address decoders between ROMs and other resources. + norom [X86-32,X86_64] Do not assign address space to + expansion ROMs that do not already have + BIOS assigned address ranges. irqmask=0xMMMM [X86-32] Set a bit mask of IRQs allowed to be assigned automatically to PCI devices. You can make the kernel exclude IRQs of your ISA cards diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 6e64aaf..3a5261b 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -121,6 +121,21 @@ void __init dmi_check_skip_isa_align(void) dmi_check_system(can_skip_pciprobe_dmi_table); } +static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) +{ + struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE]; + + if (pci_probe & PCI_NOASSIGN_ROMS) { + if (rom_r->parent) + return; + if (rom_r->start) { + /* we deal with BIOS assigned ROM later */ + return; + } + rom_r->start = rom_r->end = rom_r->flags = 0; + } +} + /* * Called after each bus is probed, but before its children * are examined. @@ -128,7 +143,11 @@ void __init dmi_check_skip_isa_align(void) void __devinit pcibios_fixup_bus(struct pci_bus *b) { + struct pci_dev *dev; + pci_read_bridge_bases(b); + list_for_each_entry(dev, &b->devices, bus_list) + pcibios_fixup_device_resources(dev); } /* @@ -483,6 +502,9 @@ char * __devinit pcibios_setup(char *str) else if (!strcmp(str, "rom")) { pci_probe |= PCI_ASSIGN_ROMS; return NULL; + } else if (!strcmp(str, "norom")) { + pci_probe |= PCI_NOASSIGN_ROMS; + return NULL; } else if (!strcmp(str, "assign-busses")) { pci_probe |= PCI_ASSIGN_ALL_BUSSES; return NULL; diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h index 720c4c5..291dafe 100644 --- a/arch/x86/pci/pci.h +++ b/arch/x86/pci/pci.h @@ -27,6 +27,7 @@ #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 #define PCI_USE__CRS 0x10000 #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 +#define PCI_NOASSIGN_ROMS 0x40000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr; -- cgit v0.10.2 From 1eede070a59e1cc73da51e1aaa00d9ab86572cfc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 20 May 2008 23:00:01 +0200 Subject: Introduce new top level suspend and hibernation callbacks Introduce 'struct pm_ops' and 'struct pm_ext_ops' ('ext' meaning 'extended') representing suspend and hibernation operations for bus types, device classes, device types and device drivers. Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops' objects, if defined, instead of the ->suspend(), ->resume(), ->suspend_late(), and ->resume_early() callbacks (the old callbacks will be considered as legacy and gradually phased out). The main purpose of doing this is to separate suspend (aka S2RAM and standby) callbacks from hibernation callbacks in such a way that the new callbacks won't take arguments and the semantics of each of them will be clearly specified. This has been requested for multiple times by many people, including Linus himself, and the reason is that within the current scheme if ->resume() is called, for example, it's difficult to say why it's been called (ie. is it a resume from RAM or from hibernation or a suspend/hibernation failure etc.?). The second purpose is to make the suspend/hibernation callbacks more flexible so that device drivers can handle more than they can within the current scheme. For example, some drivers may need to prevent new children of the device from being registered before their ->suspend() callbacks are executed or they may want to carry out some operations requiring the availability of some other devices, not directly bound via the parent-child relationship, in order to prepare for the execution of ->suspend(), etc. Ultimately, we'd like to stop using the freezing of tasks for suspend and therefore the drivers' suspend/hibernation code will have to take care of the handling of the user space during suspend/hibernation. That, in turn, would be difficult within the current scheme, without the new ->prepare() and ->complete() callbacks. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index bf9290e..c1735f6 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -1211,9 +1211,9 @@ static int suspend(int vetoable) if (err != APM_SUCCESS) apm_error("suspend", err); err = (err == APM_SUCCESS) ? 0 : -EIO; - device_power_up(); + device_power_up(PMSG_RESUME); local_irq_enable(); - device_resume(); + device_resume(PMSG_RESUME); queue_event(APM_NORMAL_RESUME, NULL); spin_lock(&user_list_lock); for (as = user_list; as != NULL; as = as->next) { @@ -1238,7 +1238,7 @@ static void standby(void) apm_error("standby", err); local_irq_disable(); - device_power_up(); + device_power_up(PMSG_RESUME); local_irq_enable(); } @@ -1324,7 +1324,7 @@ static void check_events(void) ignore_bounce = 1; if ((event != APM_NORMAL_RESUME) || (ignore_normal_resume == 0)) { - device_resume(); + device_resume(PMSG_RESUME); queue_event(event, NULL); } ignore_normal_resume = 0; diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 45cc3d9..d571204 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -12,11 +12,9 @@ * and add it to the list of power-controlled devices. sysfs entries for * controlling device power management will also be added. * - * A different set of lists than the global subsystem list are used to - * keep track of power info because we use different lists to hold - * devices based on what stage of the power management process they - * are in. The power domain dependencies may also differ from the - * ancestral dependencies that the subsystem list maintains. + * A separate list is used for keeping track of power info, because the power + * domain dependencies may differ from the ancestral dependencies that the + * subsystem list maintains. */ #include @@ -30,31 +28,40 @@ #include "power.h" /* - * The entries in the dpm_active list are in a depth first order, simply + * The entries in the dpm_list list are in a depth first order, simply * because children are guaranteed to be discovered after parents, and * are inserted at the back of the list on discovery. * - * All the other lists are kept in the same order, for consistency. - * However the lists aren't always traversed in the same order. - * Semaphores must be acquired from the top (i.e., front) down - * and released in the opposite order. Devices must be suspended - * from the bottom (i.e., end) up and resumed in the opposite order. - * That way no parent will be suspended while it still has an active - * child. - * * Since device_pm_add() may be called with a device semaphore held, * we must never try to acquire a device semaphore while holding * dpm_list_mutex. */ -LIST_HEAD(dpm_active); -static LIST_HEAD(dpm_off); -static LIST_HEAD(dpm_off_irq); +LIST_HEAD(dpm_list); static DEFINE_MUTEX(dpm_list_mtx); -/* 'true' if all devices have been suspended, protected by dpm_list_mtx */ -static bool all_sleeping; +/* + * Set once the preparation of devices for a PM transition has started, reset + * before starting to resume devices. Protected by dpm_list_mtx. + */ +static bool transition_started; + +/** + * device_pm_lock - lock the list of active devices used by the PM core + */ +void device_pm_lock(void) +{ + mutex_lock(&dpm_list_mtx); +} + +/** + * device_pm_unlock - unlock the list of active devices used by the PM core + */ +void device_pm_unlock(void) +{ + mutex_unlock(&dpm_list_mtx); +} /** * device_pm_add - add a device to the list of active devices @@ -68,17 +75,25 @@ int device_pm_add(struct device *dev) dev->bus ? dev->bus->name : "No Bus", kobject_name(&dev->kobj)); mutex_lock(&dpm_list_mtx); - if ((dev->parent && dev->parent->power.sleeping) || all_sleeping) { - if (dev->parent->power.sleeping) - dev_warn(dev, "parent %s is sleeping\n", + if (dev->parent) { + if (dev->parent->power.status >= DPM_SUSPENDING) { + dev_warn(dev, "parent %s is sleeping, will not add\n", dev->parent->bus_id); - else - dev_warn(dev, "all devices are sleeping\n"); + WARN_ON(true); + } + } else if (transition_started) { + /* + * We refuse to register parentless devices while a PM + * transition is in progress in order to avoid leaving them + * unhandled down the road + */ WARN_ON(true); } error = dpm_sysfs_add(dev); - if (!error) - list_add_tail(&dev->power.entry, &dpm_active); + if (!error) { + dev->power.status = DPM_ON; + list_add_tail(&dev->power.entry, &dpm_list); + } mutex_unlock(&dpm_list_mtx); return error; } @@ -100,73 +115,243 @@ void device_pm_remove(struct device *dev) mutex_unlock(&dpm_list_mtx); } +/** + * pm_op - execute the PM operation appropiate for given PM event + * @dev: Device. + * @ops: PM operations to choose from. + * @state: PM transition of the system being carried out. + */ +static int pm_op(struct device *dev, struct pm_ops *ops, pm_message_t state) +{ + int error = 0; + + switch (state.event) { +#ifdef CONFIG_SUSPEND + case PM_EVENT_SUSPEND: + if (ops->suspend) { + error = ops->suspend(dev); + suspend_report_result(ops->suspend, error); + } + break; + case PM_EVENT_RESUME: + if (ops->resume) { + error = ops->resume(dev); + suspend_report_result(ops->resume, error); + } + break; +#endif /* CONFIG_SUSPEND */ +#ifdef CONFIG_HIBERNATION + case PM_EVENT_FREEZE: + case PM_EVENT_QUIESCE: + if (ops->freeze) { + error = ops->freeze(dev); + suspend_report_result(ops->freeze, error); + } + break; + case PM_EVENT_HIBERNATE: + if (ops->poweroff) { + error = ops->poweroff(dev); + suspend_report_result(ops->poweroff, error); + } + break; + case PM_EVENT_THAW: + case PM_EVENT_RECOVER: + if (ops->thaw) { + error = ops->thaw(dev); + suspend_report_result(ops->thaw, error); + } + break; + case PM_EVENT_RESTORE: + if (ops->restore) { + error = ops->restore(dev); + suspend_report_result(ops->restore, error); + } + break; +#endif /* CONFIG_HIBERNATION */ + default: + error = -EINVAL; + } + return error; +} + +/** + * pm_noirq_op - execute the PM operation appropiate for given PM event + * @dev: Device. + * @ops: PM operations to choose from. + * @state: PM transition of the system being carried out. + * + * The operation is executed with interrupts disabled by the only remaining + * functional CPU in the system. + */ +static int pm_noirq_op(struct device *dev, struct pm_ext_ops *ops, + pm_message_t state) +{ + int error = 0; + + switch (state.event) { +#ifdef CONFIG_SUSPEND + case PM_EVENT_SUSPEND: + if (ops->suspend_noirq) { + error = ops->suspend_noirq(dev); + suspend_report_result(ops->suspend_noirq, error); + } + break; + case PM_EVENT_RESUME: + if (ops->resume_noirq) { + error = ops->resume_noirq(dev); + suspend_report_result(ops->resume_noirq, error); + } + break; +#endif /* CONFIG_SUSPEND */ +#ifdef CONFIG_HIBERNATION + case PM_EVENT_FREEZE: + case PM_EVENT_QUIESCE: + if (ops->freeze_noirq) { + error = ops->freeze_noirq(dev); + suspend_report_result(ops->freeze_noirq, error); + } + break; + case PM_EVENT_HIBERNATE: + if (ops->poweroff_noirq) { + error = ops->poweroff_noirq(dev); + suspend_report_result(ops->poweroff_noirq, error); + } + break; + case PM_EVENT_THAW: + case PM_EVENT_RECOVER: + if (ops->thaw_noirq) { + error = ops->thaw_noirq(dev); + suspend_report_result(ops->thaw_noirq, error); + } + break; + case PM_EVENT_RESTORE: + if (ops->restore_noirq) { + error = ops->restore_noirq(dev); + suspend_report_result(ops->restore_noirq, error); + } + break; +#endif /* CONFIG_HIBERNATION */ + default: + error = -EINVAL; + } + return error; +} + +static char *pm_verb(int event) +{ + switch (event) { + case PM_EVENT_SUSPEND: + return "suspend"; + case PM_EVENT_RESUME: + return "resume"; + case PM_EVENT_FREEZE: + return "freeze"; + case PM_EVENT_QUIESCE: + return "quiesce"; + case PM_EVENT_HIBERNATE: + return "hibernate"; + case PM_EVENT_THAW: + return "thaw"; + case PM_EVENT_RESTORE: + return "restore"; + case PM_EVENT_RECOVER: + return "recover"; + default: + return "(unknown PM event)"; + } +} + +static void pm_dev_dbg(struct device *dev, pm_message_t state, char *info) +{ + dev_dbg(dev, "%s%s%s\n", info, pm_verb(state.event), + ((state.event & PM_EVENT_SLEEP) && device_may_wakeup(dev)) ? + ", may wakeup" : ""); +} + +static void pm_dev_err(struct device *dev, pm_message_t state, char *info, + int error) +{ + printk(KERN_ERR "PM: Device %s failed to %s%s: error %d\n", + kobject_name(&dev->kobj), pm_verb(state.event), info, error); +} + /*------------------------- Resume routines -------------------------*/ /** - * resume_device_early - Power on one device (early resume). + * resume_device_noirq - Power on one device (early resume). * @dev: Device. + * @state: PM transition of the system being carried out. * * Must be called with interrupts disabled. */ -static int resume_device_early(struct device *dev) +static int resume_device_noirq(struct device *dev, pm_message_t state) { int error = 0; TRACE_DEVICE(dev); TRACE_RESUME(0); - if (dev->bus && dev->bus->resume_early) { - dev_dbg(dev, "EARLY resume\n"); + if (!dev->bus) + goto End; + + if (dev->bus->pm) { + pm_dev_dbg(dev, state, "EARLY "); + error = pm_noirq_op(dev, dev->bus->pm, state); + } else if (dev->bus->resume_early) { + pm_dev_dbg(dev, state, "legacy EARLY "); error = dev->bus->resume_early(dev); } - + End: TRACE_RESUME(error); return error; } /** * dpm_power_up - Power on all regular (non-sysdev) devices. + * @state: PM transition of the system being carried out. * - * Walk the dpm_off_irq list and power each device up. This - * is used for devices that required they be powered down with - * interrupts disabled. As devices are powered on, they are moved - * to the dpm_off list. + * Execute the appropriate "noirq resume" callback for all devices marked + * as DPM_OFF_IRQ. * * Must be called with interrupts disabled and only one CPU running. */ -static void dpm_power_up(void) +static void dpm_power_up(pm_message_t state) { + struct device *dev; - while (!list_empty(&dpm_off_irq)) { - struct list_head *entry = dpm_off_irq.next; - struct device *dev = to_device(entry); + list_for_each_entry(dev, &dpm_list, power.entry) + if (dev->power.status > DPM_OFF) { + int error; - list_move_tail(entry, &dpm_off); - resume_device_early(dev); - } + dev->power.status = DPM_OFF; + error = resume_device_noirq(dev, state); + if (error) + pm_dev_err(dev, state, " early", error); + } } /** * device_power_up - Turn on all devices that need special attention. + * @state: PM transition of the system being carried out. * * Power on system devices, then devices that required we shut them down * with interrupts disabled. * * Must be called with interrupts disabled. */ -void device_power_up(void) +void device_power_up(pm_message_t state) { sysdev_resume(); - dpm_power_up(); + dpm_power_up(state); } EXPORT_SYMBOL_GPL(device_power_up); /** * resume_device - Restore state for one device. * @dev: Device. - * + * @state: PM transition of the system being carried out. */ -static int resume_device(struct device *dev) +static int resume_device(struct device *dev, pm_message_t state) { int error = 0; @@ -175,21 +360,40 @@ static int resume_device(struct device *dev) down(&dev->sem); - if (dev->bus && dev->bus->resume) { - dev_dbg(dev,"resuming\n"); - error = dev->bus->resume(dev); + if (dev->bus) { + if (dev->bus->pm) { + pm_dev_dbg(dev, state, ""); + error = pm_op(dev, &dev->bus->pm->base, state); + } else if (dev->bus->resume) { + pm_dev_dbg(dev, state, "legacy "); + error = dev->bus->resume(dev); + } + if (error) + goto End; } - if (!error && dev->type && dev->type->resume) { - dev_dbg(dev,"resuming\n"); - error = dev->type->resume(dev); + if (dev->type) { + if (dev->type->pm) { + pm_dev_dbg(dev, state, "type "); + error = pm_op(dev, dev->type->pm, state); + } else if (dev->type->resume) { + pm_dev_dbg(dev, state, "legacy type "); + error = dev->type->resume(dev); + } + if (error) + goto End; } - if (!error && dev->class && dev->class->resume) { - dev_dbg(dev,"class resume\n"); - error = dev->class->resume(dev); + if (dev->class) { + if (dev->class->pm) { + pm_dev_dbg(dev, state, "class "); + error = pm_op(dev, dev->class->pm, state); + } else if (dev->class->resume) { + pm_dev_dbg(dev, state, "legacy class "); + error = dev->class->resume(dev); + } } - + End: up(&dev->sem); TRACE_RESUME(error); @@ -198,78 +402,161 @@ static int resume_device(struct device *dev) /** * dpm_resume - Resume every device. + * @state: PM transition of the system being carried out. * - * Resume the devices that have either not gone through - * the late suspend, or that did go through it but also - * went through the early resume. + * Execute the appropriate "resume" callback for all devices the status of + * which indicates that they are inactive. + */ +static void dpm_resume(pm_message_t state) +{ + struct list_head list; + + INIT_LIST_HEAD(&list); + mutex_lock(&dpm_list_mtx); + transition_started = false; + while (!list_empty(&dpm_list)) { + struct device *dev = to_device(dpm_list.next); + + get_device(dev); + if (dev->power.status >= DPM_OFF) { + int error; + + dev->power.status = DPM_RESUMING; + mutex_unlock(&dpm_list_mtx); + + error = resume_device(dev, state); + + mutex_lock(&dpm_list_mtx); + if (error) + pm_dev_err(dev, state, "", error); + } else if (dev->power.status == DPM_SUSPENDING) { + /* Allow new children of the device to be registered */ + dev->power.status = DPM_RESUMING; + } + if (!list_empty(&dev->power.entry)) + list_move_tail(&dev->power.entry, &list); + put_device(dev); + } + list_splice(&list, &dpm_list); + mutex_unlock(&dpm_list_mtx); +} + +/** + * complete_device - Complete a PM transition for given device + * @dev: Device. + * @state: PM transition of the system being carried out. + */ +static void complete_device(struct device *dev, pm_message_t state) +{ + down(&dev->sem); + + if (dev->class && dev->class->pm && dev->class->pm->complete) { + pm_dev_dbg(dev, state, "completing class "); + dev->class->pm->complete(dev); + } + + if (dev->type && dev->type->pm && dev->type->pm->complete) { + pm_dev_dbg(dev, state, "completing type "); + dev->type->pm->complete(dev); + } + + if (dev->bus && dev->bus->pm && dev->bus->pm->base.complete) { + pm_dev_dbg(dev, state, "completing "); + dev->bus->pm->base.complete(dev); + } + + up(&dev->sem); +} + +/** + * dpm_complete - Complete a PM transition for all devices. + * @state: PM transition of the system being carried out. * - * Take devices from the dpm_off_list, resume them, - * and put them on the dpm_locked list. + * Execute the ->complete() callbacks for all devices that are not marked + * as DPM_ON. */ -static void dpm_resume(void) +static void dpm_complete(pm_message_t state) { + struct list_head list; + + INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); - all_sleeping = false; - while(!list_empty(&dpm_off)) { - struct list_head *entry = dpm_off.next; - struct device *dev = to_device(entry); + while (!list_empty(&dpm_list)) { + struct device *dev = to_device(dpm_list.prev); - list_move_tail(entry, &dpm_active); - dev->power.sleeping = false; - mutex_unlock(&dpm_list_mtx); - resume_device(dev); - mutex_lock(&dpm_list_mtx); + get_device(dev); + if (dev->power.status > DPM_ON) { + dev->power.status = DPM_ON; + mutex_unlock(&dpm_list_mtx); + + complete_device(dev, state); + + mutex_lock(&dpm_list_mtx); + } + if (!list_empty(&dev->power.entry)) + list_move(&dev->power.entry, &list); + put_device(dev); } + list_splice(&list, &dpm_list); mutex_unlock(&dpm_list_mtx); } /** * device_resume - Restore state of each device in system. + * @state: PM transition of the system being carried out. * * Resume all the devices, unlock them all, and allow new * devices to be registered once again. */ -void device_resume(void) +void device_resume(pm_message_t state) { might_sleep(); - dpm_resume(); + dpm_resume(state); + dpm_complete(state); } EXPORT_SYMBOL_GPL(device_resume); /*------------------------- Suspend routines -------------------------*/ -static inline char *suspend_verb(u32 event) +/** + * resume_event - return a PM message representing the resume event + * corresponding to given sleep state. + * @sleep_state: PM message representing a sleep state. + */ +static pm_message_t resume_event(pm_message_t sleep_state) { - switch (event) { - case PM_EVENT_SUSPEND: return "suspend"; - case PM_EVENT_FREEZE: return "freeze"; - case PM_EVENT_PRETHAW: return "prethaw"; - default: return "(unknown suspend event)"; + switch (sleep_state.event) { + case PM_EVENT_SUSPEND: + return PMSG_RESUME; + case PM_EVENT_FREEZE: + case PM_EVENT_QUIESCE: + return PMSG_RECOVER; + case PM_EVENT_HIBERNATE: + return PMSG_RESTORE; } -} - -static void -suspend_device_dbg(struct device *dev, pm_message_t state, char *info) -{ - dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event), - ((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ? - ", may wakeup" : ""); + return PMSG_ON; } /** - * suspend_device_late - Shut down one device (late suspend). + * suspend_device_noirq - Shut down one device (late suspend). * @dev: Device. - * @state: Power state device is entering. + * @state: PM transition of the system being carried out. * * This is called with interrupts off and only a single CPU running. */ -static int suspend_device_late(struct device *dev, pm_message_t state) +static int suspend_device_noirq(struct device *dev, pm_message_t state) { int error = 0; - if (dev->bus && dev->bus->suspend_late) { - suspend_device_dbg(dev, state, "LATE "); + if (!dev->bus) + return 0; + + if (dev->bus->pm) { + pm_dev_dbg(dev, state, "LATE "); + error = pm_noirq_op(dev, dev->bus->pm, state); + } else if (dev->bus->suspend_late) { + pm_dev_dbg(dev, state, "legacy LATE "); error = dev->bus->suspend_late(dev, state); suspend_report_result(dev->bus->suspend_late, error); } @@ -278,37 +565,30 @@ static int suspend_device_late(struct device *dev, pm_message_t state) /** * device_power_down - Shut down special devices. - * @state: Power state to enter. + * @state: PM transition of the system being carried out. * - * Power down devices that require interrupts to be disabled - * and move them from the dpm_off list to the dpm_off_irq list. + * Power down devices that require interrupts to be disabled. * Then power down system devices. * * Must be called with interrupts disabled and only one CPU running. */ int device_power_down(pm_message_t state) { + struct device *dev; int error = 0; - while (!list_empty(&dpm_off)) { - struct list_head *entry = dpm_off.prev; - struct device *dev = to_device(entry); - - error = suspend_device_late(dev, state); + list_for_each_entry_reverse(dev, &dpm_list, power.entry) { + error = suspend_device_noirq(dev, state); if (error) { - printk(KERN_ERR "Could not power down device %s: " - "error %d\n", - kobject_name(&dev->kobj), error); + pm_dev_err(dev, state, " late", error); break; } - if (!list_empty(&dev->power.entry)) - list_move(&dev->power.entry, &dpm_off_irq); + dev->power.status = DPM_OFF_IRQ; } - if (!error) error = sysdev_suspend(state); if (error) - dpm_power_up(); + dpm_power_up(resume_event(state)); return error; } EXPORT_SYMBOL_GPL(device_power_down); @@ -316,7 +596,7 @@ EXPORT_SYMBOL_GPL(device_power_down); /** * suspend_device - Save state of one device. * @dev: Device. - * @state: Power state device is entering. + * @state: PM transition of the system being carried out. */ static int suspend_device(struct device *dev, pm_message_t state) { @@ -324,24 +604,43 @@ static int suspend_device(struct device *dev, pm_message_t state) down(&dev->sem); - if (dev->class && dev->class->suspend) { - suspend_device_dbg(dev, state, "class "); - error = dev->class->suspend(dev, state); - suspend_report_result(dev->class->suspend, error); + if (dev->class) { + if (dev->class->pm) { + pm_dev_dbg(dev, state, "class "); + error = pm_op(dev, dev->class->pm, state); + } else if (dev->class->suspend) { + pm_dev_dbg(dev, state, "legacy class "); + error = dev->class->suspend(dev, state); + suspend_report_result(dev->class->suspend, error); + } + if (error) + goto End; } - if (!error && dev->type && dev->type->suspend) { - suspend_device_dbg(dev, state, "type "); - error = dev->type->suspend(dev, state); - suspend_report_result(dev->type->suspend, error); + if (dev->type) { + if (dev->type->pm) { + pm_dev_dbg(dev, state, "type "); + error = pm_op(dev, dev->type->pm, state); + } else if (dev->type->suspend) { + pm_dev_dbg(dev, state, "legacy type "); + error = dev->type->suspend(dev, state); + suspend_report_result(dev->type->suspend, error); + } + if (error) + goto End; } - if (!error && dev->bus && dev->bus->suspend) { - suspend_device_dbg(dev, state, ""); - error = dev->bus->suspend(dev, state); - suspend_report_result(dev->bus->suspend, error); + if (dev->bus) { + if (dev->bus->pm) { + pm_dev_dbg(dev, state, ""); + error = pm_op(dev, &dev->bus->pm->base, state); + } else if (dev->bus->suspend) { + pm_dev_dbg(dev, state, "legacy "); + error = dev->bus->suspend(dev, state); + suspend_report_result(dev->bus->suspend, error); + } } - + End: up(&dev->sem); return error; @@ -349,67 +648,141 @@ static int suspend_device(struct device *dev, pm_message_t state) /** * dpm_suspend - Suspend every device. - * @state: Power state to put each device in. + * @state: PM transition of the system being carried out. * - * Walk the dpm_locked list. Suspend each device and move it - * to the dpm_off list. - * - * (For historical reasons, if it returns -EAGAIN, that used to mean - * that the device would be called again with interrupts disabled. - * These days, we use the "suspend_late()" callback for that, so we - * print a warning and consider it an error). + * Execute the appropriate "suspend" callbacks for all devices. */ static int dpm_suspend(pm_message_t state) { + struct list_head list; int error = 0; + INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); - while (!list_empty(&dpm_active)) { - struct list_head *entry = dpm_active.prev; - struct device *dev = to_device(entry); - - WARN_ON(dev->parent && dev->parent->power.sleeping); + while (!list_empty(&dpm_list)) { + struct device *dev = to_device(dpm_list.prev); - dev->power.sleeping = true; + get_device(dev); mutex_unlock(&dpm_list_mtx); + error = suspend_device(dev, state); + mutex_lock(&dpm_list_mtx); if (error) { - printk(KERN_ERR "Could not suspend device %s: " - "error %d%s\n", - kobject_name(&dev->kobj), - error, - (error == -EAGAIN ? - " (please convert to suspend_late)" : - "")); - dev->power.sleeping = false; + pm_dev_err(dev, state, "", error); + put_device(dev); break; } + dev->power.status = DPM_OFF; if (!list_empty(&dev->power.entry)) - list_move(&dev->power.entry, &dpm_off); + list_move(&dev->power.entry, &list); + put_device(dev); } - if (!error) - all_sleeping = true; + list_splice(&list, dpm_list.prev); mutex_unlock(&dpm_list_mtx); + return error; +} + +/** + * prepare_device - Execute the ->prepare() callback(s) for given device. + * @dev: Device. + * @state: PM transition of the system being carried out. + */ +static int prepare_device(struct device *dev, pm_message_t state) +{ + int error = 0; + + down(&dev->sem); + + if (dev->bus && dev->bus->pm && dev->bus->pm->base.prepare) { + pm_dev_dbg(dev, state, "preparing "); + error = dev->bus->pm->base.prepare(dev); + suspend_report_result(dev->bus->pm->base.prepare, error); + if (error) + goto End; + } + + if (dev->type && dev->type->pm && dev->type->pm->prepare) { + pm_dev_dbg(dev, state, "preparing type "); + error = dev->type->pm->prepare(dev); + suspend_report_result(dev->type->pm->prepare, error); + if (error) + goto End; + } + + if (dev->class && dev->class->pm && dev->class->pm->prepare) { + pm_dev_dbg(dev, state, "preparing class "); + error = dev->class->pm->prepare(dev); + suspend_report_result(dev->class->pm->prepare, error); + } + End: + up(&dev->sem); + + return error; +} +/** + * dpm_prepare - Prepare all devices for a PM transition. + * @state: PM transition of the system being carried out. + * + * Execute the ->prepare() callback for all devices. + */ +static int dpm_prepare(pm_message_t state) +{ + struct list_head list; + int error = 0; + + INIT_LIST_HEAD(&list); + mutex_lock(&dpm_list_mtx); + transition_started = true; + while (!list_empty(&dpm_list)) { + struct device *dev = to_device(dpm_list.next); + + get_device(dev); + dev->power.status = DPM_PREPARING; + mutex_unlock(&dpm_list_mtx); + + error = prepare_device(dev, state); + + mutex_lock(&dpm_list_mtx); + if (error) { + dev->power.status = DPM_ON; + if (error == -EAGAIN) { + put_device(dev); + continue; + } + printk(KERN_ERR "PM: Failed to prepare device %s " + "for power transition: error %d\n", + kobject_name(&dev->kobj), error); + put_device(dev); + break; + } + dev->power.status = DPM_SUSPENDING; + if (!list_empty(&dev->power.entry)) + list_move_tail(&dev->power.entry, &list); + put_device(dev); + } + list_splice(&list, &dpm_list); + mutex_unlock(&dpm_list_mtx); return error; } /** * device_suspend - Save state and stop all devices in system. - * @state: new power management state + * @state: PM transition of the system being carried out. * - * Prevent new devices from being registered, then lock all devices - * and suspend them. + * Prepare and suspend all devices. */ int device_suspend(pm_message_t state) { int error; might_sleep(); - error = dpm_suspend(state); + error = dpm_prepare(state); + if (!error) + error = dpm_suspend(state); if (error) - device_resume(); + device_resume(resume_event(state)); return error; } EXPORT_SYMBOL_GPL(device_suspend); diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index a6894f2..a3252c0 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -4,7 +4,7 @@ * main.c */ -extern struct list_head dpm_active; /* The active device list */ +extern struct list_head dpm_list; /* The active device list */ static inline struct device *to_device(struct list_head *entry) { diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c index 2b4b392..8c1e656 100644 --- a/drivers/base/power/trace.c +++ b/drivers/base/power/trace.c @@ -188,9 +188,9 @@ static int show_file_hash(unsigned int value) static int show_dev_hash(unsigned int value) { int match = 0; - struct list_head * entry = dpm_active.prev; + struct list_head *entry = dpm_list.prev; - while (entry != &dpm_active) { + while (entry != &dpm_list) { struct device * dev = to_device(entry); unsigned int hash = hash_string(DEVSEED, dev->bus_id, DEVHASH); if (hash == value) { diff --git a/include/linux/device.h b/include/linux/device.h index 6a2d04c..f71a78d 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -68,6 +68,8 @@ struct bus_type { int (*resume_early)(struct device *dev); int (*resume)(struct device *dev); + struct pm_ext_ops *pm; + struct bus_type_private *p; }; @@ -131,6 +133,8 @@ struct device_driver { int (*resume) (struct device *dev); struct attribute_group **groups; + struct pm_ops *pm; + struct driver_private *p; }; @@ -197,6 +201,8 @@ struct class { int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); + + struct pm_ops *pm; }; extern int __must_check class_register(struct class *class); @@ -248,8 +254,11 @@ struct device_type { struct attribute_group **groups; int (*uevent)(struct device *dev, struct kobj_uevent_env *env); void (*release)(struct device *dev); + int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); + + struct pm_ops *pm; }; /* interface for exporting device attributes */ diff --git a/include/linux/pm.h b/include/linux/pm.h index 39a7ee8..4ad9de9 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -112,7 +112,9 @@ typedef struct pm_message { int event; } pm_message_t; -/* +/** + * struct pm_ops - device PM callbacks + * * Several driver power state transitions are externally visible, affecting * the state of pending I/O queues and (for drivers that touch hardware) * interrupts, wakeups, DMA, and other hardware state. There may also be @@ -120,6 +122,284 @@ typedef struct pm_message { * to the rest of the driver stack (such as a driver that's ON gating off * clocks which are not in active use). * + * The externally visible transitions are handled with the help of the following + * callbacks included in this structure: + * + * @prepare: Prepare the device for the upcoming transition, but do NOT change + * its hardware state. Prevent new children of the device from being + * registered after @prepare() returns (the driver's subsystem and + * generally the rest of the kernel is supposed to prevent new calls to the + * probe method from being made too once @prepare() has succeeded). If + * @prepare() detects a situation it cannot handle (e.g. registration of a + * child already in progress), it may return -EAGAIN, so that the PM core + * can execute it once again (e.g. after the new child has been registered) + * to recover from the race condition. This method is executed for all + * kinds of suspend transitions and is followed by one of the suspend + * callbacks: @suspend(), @freeze(), or @poweroff(). + * The PM core executes @prepare() for all devices before starting to + * execute suspend callbacks for any of them, so drivers may assume all of + * the other devices to be present and functional while @prepare() is being + * executed. In particular, it is safe to make GFP_KERNEL memory + * allocations from within @prepare(). However, drivers may NOT assume + * anything about the availability of the user space at that time and it + * is not correct to request firmware from within @prepare() (it's too + * late to do that). [To work around this limitation, drivers may + * register suspend and hibernation notifiers that are executed before the + * freezing of tasks.] + * + * @complete: Undo the changes made by @prepare(). This method is executed for + * all kinds of resume transitions, following one of the resume callbacks: + * @resume(), @thaw(), @restore(). Also called if the state transition + * fails before the driver's suspend callback (@suspend(), @freeze(), + * @poweroff()) can be executed (e.g. if the suspend callback fails for one + * of the other devices that the PM core has unsuccessfully attempted to + * suspend earlier). + * The PM core executes @complete() after it has executed the appropriate + * resume callback for all devices. + * + * @suspend: Executed before putting the system into a sleep state in which the + * contents of main memory are preserved. Quiesce the device, put it into + * a low power state appropriate for the upcoming system state (such as + * PCI_D3hot), and enable wakeup events as appropriate. + * + * @resume: Executed after waking the system up from a sleep state in which the + * contents of main memory were preserved. Put the device into the + * appropriate state, according to the information saved in memory by the + * preceding @suspend(). The driver starts working again, responding to + * hardware events and software requests. The hardware may have gone + * through a power-off reset, or it may have maintained state from the + * previous suspend() which the driver may rely on while resuming. On most + * platforms, there are no restrictions on availability of resources like + * clocks during @resume(). + * + * @freeze: Hibernation-specific, executed before creating a hibernation image. + * Quiesce operations so that a consistent image can be created, but do NOT + * otherwise put the device into a low power device state and do NOT emit + * system wakeup events. Save in main memory the device settings to be + * used by @restore() during the subsequent resume from hibernation or by + * the subsequent @thaw(), if the creation of the image or the restoration + * of main memory contents from it fails. + * + * @thaw: Hibernation-specific, executed after creating a hibernation image OR + * if the creation of the image fails. Also executed after a failing + * attempt to restore the contents of main memory from such an image. + * Undo the changes made by the preceding @freeze(), so the device can be + * operated in the same way as immediately before the call to @freeze(). + * + * @poweroff: Hibernation-specific, executed after saving a hibernation image. + * Quiesce the device, put it into a low power state appropriate for the + * upcoming system state (such as PCI_D3hot), and enable wakeup events as + * appropriate. + * + * @restore: Hibernation-specific, executed after restoring the contents of main + * memory from a hibernation image. Driver starts working again, + * responding to hardware events and software requests. Drivers may NOT + * make ANY assumptions about the hardware state right prior to @restore(). + * On most platforms, there are no restrictions on availability of + * resources like clocks during @restore(). + * + * All of the above callbacks, except for @complete(), return error codes. + * However, the error codes returned by the resume operations, @resume(), + * @thaw(), and @restore(), do not cause the PM core to abort the resume + * transition during which they are returned. The error codes returned in + * that cases are only printed by the PM core to the system logs for debugging + * purposes. Still, it is recommended that drivers only return error codes + * from their resume methods in case of an unrecoverable failure (i.e. when the + * device being handled refuses to resume and becomes unusable) to allow us to + * modify the PM core in the future, so that it can avoid attempting to handle + * devices that failed to resume and their children. + * + * It is allowed to unregister devices while the above callbacks are being + * executed. However, it is not allowed to unregister a device from within any + * of its own callbacks. + */ + +struct pm_ops { + int (*prepare)(struct device *dev); + void (*complete)(struct device *dev); + int (*suspend)(struct device *dev); + int (*resume)(struct device *dev); + int (*freeze)(struct device *dev); + int (*thaw)(struct device *dev); + int (*poweroff)(struct device *dev); + int (*restore)(struct device *dev); +}; + +/** + * struct pm_ext_ops - extended device PM callbacks + * + * Some devices require certain operations related to suspend and hibernation + * to be carried out with interrupts disabled. Thus, 'struct pm_ext_ops' below + * is defined, adding callbacks to be executed with interrupts disabled to + * 'struct pm_ops'. + * + * The following callbacks included in 'struct pm_ext_ops' are executed with + * the nonboot CPUs switched off and with interrupts disabled on the only + * functional CPU. They also are executed with the PM core list of devices + * locked, so they must NOT unregister any devices. + * + * @suspend_noirq: Complete the operations of ->suspend() by carrying out any + * actions required for suspending the device that need interrupts to be + * disabled + * + * @resume_noirq: Prepare for the execution of ->resume() by carrying out any + * actions required for resuming the device that need interrupts to be + * disabled + * + * @freeze_noirq: Complete the operations of ->freeze() by carrying out any + * actions required for freezing the device that need interrupts to be + * disabled + * + * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any + * actions required for thawing the device that need interrupts to be + * disabled + * + * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any + * actions required for handling the device that need interrupts to be + * disabled + * + * @restore_noirq: Prepare for the execution of ->restore() by carrying out any + * actions required for restoring the operations of the device that need + * interrupts to be disabled + * + * All of the above callbacks return error codes, but the error codes returned + * by the resume operations, @resume_noirq(), @thaw_noirq(), and + * @restore_noirq(), do not cause the PM core to abort the resume transition + * during which they are returned. The error codes returned in that cases are + * only printed by the PM core to the system logs for debugging purposes. + * Still, as stated above, it is recommended that drivers only return error + * codes from their resume methods if the device being handled fails to resume + * and is not usable any more. + */ + +struct pm_ext_ops { + struct pm_ops base; + int (*suspend_noirq)(struct device *dev); + int (*resume_noirq)(struct device *dev); + int (*freeze_noirq)(struct device *dev); + int (*thaw_noirq)(struct device *dev); + int (*poweroff_noirq)(struct device *dev); + int (*restore_noirq)(struct device *dev); +}; + +/** + * PM_EVENT_ messages + * + * The following PM_EVENT_ messages are defined for the internal use of the PM + * core, in order to provide a mechanism allowing the high level suspend and + * hibernation code to convey the necessary information to the device PM core + * code: + * + * ON No transition. + * + * FREEZE System is going to hibernate, call ->prepare() and ->freeze() + * for all devices. + * + * SUSPEND System is going to suspend, call ->prepare() and ->suspend() + * for all devices. + * + * HIBERNATE Hibernation image has been saved, call ->prepare() and + * ->poweroff() for all devices. + * + * QUIESCE Contents of main memory are going to be restored from a (loaded) + * hibernation image, call ->prepare() and ->freeze() for all + * devices. + * + * RESUME System is resuming, call ->resume() and ->complete() for all + * devices. + * + * THAW Hibernation image has been created, call ->thaw() and + * ->complete() for all devices. + * + * RESTORE Contents of main memory have been restored from a hibernation + * image, call ->restore() and ->complete() for all devices. + * + * RECOVER Creation of a hibernation image or restoration of the main + * memory contents from a hibernation image has failed, call + * ->thaw() and ->complete() for all devices. + */ + +#define PM_EVENT_ON 0x0000 +#define PM_EVENT_FREEZE 0x0001 +#define PM_EVENT_SUSPEND 0x0002 +#define PM_EVENT_HIBERNATE 0x0004 +#define PM_EVENT_QUIESCE 0x0008 +#define PM_EVENT_RESUME 0x0010 +#define PM_EVENT_THAW 0x0020 +#define PM_EVENT_RESTORE 0x0040 +#define PM_EVENT_RECOVER 0x0080 + +#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE) + +#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) +#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, }) +#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) +#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, }) +#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, }) +#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, }) +#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, }) +#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, }) +#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) + +/** + * Device power management states + * + * These state labels are used internally by the PM core to indicate the current + * status of a device with respect to the PM core operations. + * + * DPM_ON Device is regarded as operational. Set this way + * initially and when ->complete() is about to be called. + * Also set when ->prepare() fails. + * + * DPM_PREPARING Device is going to be prepared for a PM transition. Set + * when ->prepare() is about to be called. + * + * DPM_RESUMING Device is going to be resumed. Set when ->resume(), + * ->thaw(), or ->restore() is about to be called. + * + * DPM_SUSPENDING Device has been prepared for a power transition. Set + * when ->prepare() has just succeeded. + * + * DPM_OFF Device is regarded as inactive. Set immediately after + * ->suspend(), ->freeze(), or ->poweroff() has succeeded. + * Also set when ->resume()_noirq, ->thaw_noirq(), or + * ->restore_noirq() is about to be called. + * + * DPM_OFF_IRQ Device is in a "deep sleep". Set immediately after + * ->suspend_noirq(), ->freeze_noirq(), or + * ->poweroff_noirq() has just succeeded. + */ + +enum dpm_state { + DPM_INVALID, + DPM_ON, + DPM_PREPARING, + DPM_RESUMING, + DPM_SUSPENDING, + DPM_OFF, + DPM_OFF_IRQ, +}; + +struct dev_pm_info { + pm_message_t power_state; + unsigned can_wakeup:1; + unsigned should_wakeup:1; + enum dpm_state status; /* Owned by the PM core */ +#ifdef CONFIG_PM_SLEEP + struct list_head entry; +#endif +}; + +/* + * The PM_EVENT_ messages are also used by drivers implementing the legacy + * suspend framework, based on the ->suspend() and ->resume() callbacks common + * for suspend and hibernation transitions, according to the rules below. + */ + +/* Necessary, because several drivers use PM_EVENT_PRETHAW */ +#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE + +/* * One transition is triggered by resume(), after a suspend() call; the * message is implicit: * @@ -164,35 +444,13 @@ typedef struct pm_message { * or from system low-power states such as standby or suspend-to-RAM. */ -#define PM_EVENT_ON 0 -#define PM_EVENT_FREEZE 1 -#define PM_EVENT_SUSPEND 2 -#define PM_EVENT_HIBERNATE 4 -#define PM_EVENT_PRETHAW 8 - -#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE) - -#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) -#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, }) -#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) -#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, }) -#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) - -struct dev_pm_info { - pm_message_t power_state; - unsigned can_wakeup:1; - unsigned should_wakeup:1; - bool sleeping:1; /* Owned by the PM core */ -#ifdef CONFIG_PM_SLEEP - struct list_head entry; -#endif -}; +#ifdef CONFIG_PM_SLEEP +extern void device_pm_lock(void); +extern void device_power_up(pm_message_t state); +extern void device_resume(pm_message_t state); +extern void device_pm_unlock(void); extern int device_power_down(pm_message_t state); -extern void device_power_up(void); -extern void device_resume(void); - -#ifdef CONFIG_PM_SLEEP extern int device_suspend(pm_message_t state); extern int device_prepare_suspend(pm_message_t state); diff --git a/kernel/power/disk.c b/kernel/power/disk.c index 14a656c..d416be0 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -193,6 +193,7 @@ static int create_image(int platform_mode) if (error) return error; + device_pm_lock(); local_irq_disable(); /* At this point, device_suspend() has been called, but *not* * device_power_down(). We *must* call device_power_down() now. @@ -224,9 +225,11 @@ static int create_image(int platform_mode) /* NOTE: device_power_up() is just a resume() for devices * that suspended with irqs off ... no overall powerup. */ - device_power_up(); + device_power_up(in_suspend ? + (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); Enable_irqs: local_irq_enable(); + device_pm_unlock(); return error; } @@ -280,7 +283,8 @@ int hibernation_snapshot(int platform_mode) Finish: platform_finish(platform_mode); Resume_devices: - device_resume(); + device_resume(in_suspend ? + (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); Resume_console: resume_console(); Close: @@ -300,8 +304,9 @@ static int resume_target_kernel(void) { int error; + device_pm_lock(); local_irq_disable(); - error = device_power_down(PMSG_PRETHAW); + error = device_power_down(PMSG_QUIESCE); if (error) { printk(KERN_ERR "PM: Some devices failed to power down, " "aborting resume\n"); @@ -329,9 +334,10 @@ static int resume_target_kernel(void) swsusp_free(); restore_processor_state(); touch_softlockup_watchdog(); - device_power_up(); + device_power_up(PMSG_RECOVER); Enable_irqs: local_irq_enable(); + device_pm_unlock(); return error; } @@ -350,7 +356,7 @@ int hibernation_restore(int platform_mode) pm_prepare_console(); suspend_console(); - error = device_suspend(PMSG_PRETHAW); + error = device_suspend(PMSG_QUIESCE); if (error) goto Finish; @@ -362,7 +368,7 @@ int hibernation_restore(int platform_mode) enable_nonboot_cpus(); } platform_restore_cleanup(platform_mode); - device_resume(); + device_resume(PMSG_RECOVER); Finish: resume_console(); pm_restore_console(); @@ -403,6 +409,7 @@ int hibernation_platform_enter(void) if (error) goto Finish; + device_pm_lock(); local_irq_disable(); error = device_power_down(PMSG_HIBERNATE); if (!error) { @@ -411,6 +418,7 @@ int hibernation_platform_enter(void) while (1); } local_irq_enable(); + device_pm_unlock(); /* * We don't need to reenable the nonboot CPUs or resume consoles, since @@ -419,7 +427,7 @@ int hibernation_platform_enter(void) Finish: hibernation_ops->finish(); Resume_devices: - device_resume(); + device_resume(PMSG_RESTORE); Resume_console: resume_console(); Close: diff --git a/kernel/power/main.c b/kernel/power/main.c index 6a6d5eb..d023b6b 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -228,6 +228,7 @@ static int suspend_enter(suspend_state_t state) { int error = 0; + device_pm_lock(); arch_suspend_disable_irqs(); BUG_ON(!irqs_disabled()); @@ -239,10 +240,11 @@ static int suspend_enter(suspend_state_t state) if (!suspend_test(TEST_CORE)) error = suspend_ops->enter(state); - device_power_up(); + device_power_up(PMSG_RESUME); Done: arch_suspend_enable_irqs(); BUG_ON(irqs_disabled()); + device_pm_unlock(); return error; } @@ -291,7 +293,7 @@ int suspend_devices_and_enter(suspend_state_t state) if (suspend_ops->finish) suspend_ops->finish(); Resume_devices: - device_resume(); + device_resume(PMSG_RESUME); Resume_console: resume_console(); Close: -- cgit v0.10.2 From bbb44d9f23d868a2837c6b22b8dfb123d8e7800c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 20 May 2008 00:49:04 +0200 Subject: PCI: implement new suspend/resume callbacks Implement new suspend and hibernation callbacks for the PCI bus type. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 677fd9d..8eb8a30 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -274,7 +274,57 @@ static int pci_device_remove(struct device * dev) return 0; } -static int pci_device_suspend(struct device * dev, pm_message_t state) +static void pci_device_shutdown(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct pci_driver *drv = pci_dev->driver; + + if (drv && drv->shutdown) + drv->shutdown(pci_dev); + pci_msi_shutdown(pci_dev); + pci_msix_shutdown(pci_dev); +} + +#ifdef CONFIG_PM_SLEEP + +/* + * Default "suspend" method for devices that have no driver provided suspend, + * or not even a driver at all. + */ +static void pci_default_pm_suspend(struct pci_dev *pci_dev) +{ + pci_save_state(pci_dev); + /* + * mark its power state as "unknown", since we don't know if + * e.g. the BIOS will change its device state when we suspend. + */ + if (pci_dev->current_state == PCI_D0) + pci_dev->current_state = PCI_UNKNOWN; +} + +/* + * Default "resume" method for devices that have no driver provided resume, + * or not even a driver at all. + */ +static int pci_default_pm_resume(struct pci_dev *pci_dev) +{ + int retval = 0; + + /* restore the PCI config space */ + pci_restore_state(pci_dev); + /* if the device was enabled before suspend, reenable */ + retval = pci_reenable_device(pci_dev); + /* + * if the device was busmaster before the suspend, make it busmaster + * again + */ + if (pci_dev->is_busmaster) + pci_set_master(pci_dev); + + return retval; +} + +static int pci_legacy_suspend(struct device *dev, pm_message_t state) { struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; @@ -284,21 +334,12 @@ static int pci_device_suspend(struct device * dev, pm_message_t state) i = drv->suspend(pci_dev, state); suspend_report_result(drv->suspend, i); } else { - pci_save_state(pci_dev); - /* - * mark its power state as "unknown", since we don't know if - * e.g. the BIOS will change its device state when we suspend. - */ - if (pci_dev->current_state == PCI_D0) - pci_dev->current_state = PCI_UNKNOWN; + pci_default_pm_suspend(pci_dev); } - - pci_fixup_device(pci_fixup_suspend, pci_dev); - return i; } -static int pci_device_suspend_late(struct device * dev, pm_message_t state) +static int pci_legacy_suspend_late(struct device *dev, pm_message_t state) { struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; @@ -311,26 +352,7 @@ static int pci_device_suspend_late(struct device * dev, pm_message_t state) return i; } -/* - * Default resume method for devices that have no driver provided resume, - * or not even a driver at all. - */ -static int pci_default_resume(struct pci_dev *pci_dev) -{ - int retval = 0; - - /* restore the PCI config space */ - pci_restore_state(pci_dev); - /* if the device was enabled before suspend, reenable */ - retval = pci_reenable_device(pci_dev); - /* if the device was busmaster before the suspend, make it busmaster again */ - if (pci_dev->is_busmaster) - pci_set_master(pci_dev); - - return retval; -} - -static int pci_device_resume(struct device * dev) +static int pci_legacy_resume(struct device *dev) { int error; struct pci_dev * pci_dev = to_pci_dev(dev); @@ -339,35 +361,313 @@ static int pci_device_resume(struct device * dev) if (drv && drv->resume) error = drv->resume(pci_dev); else - error = pci_default_resume(pci_dev); - pci_fixup_device(pci_fixup_resume, pci_dev); + error = pci_default_pm_resume(pci_dev); return error; } -static int pci_device_resume_early(struct device * dev) +static int pci_legacy_resume_early(struct device *dev) { int error = 0; struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; - pci_fixup_device(pci_fixup_resume_early, pci_dev); - if (drv && drv->resume_early) error = drv->resume_early(pci_dev); return error; } -static void pci_device_shutdown(struct device *dev) +static int pci_pm_prepare(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int error = 0; + + if (drv && drv->pm && drv->pm->prepare) + error = drv->pm->prepare(dev); + + return error; +} + +static void pci_pm_complete(struct device *dev) +{ + struct device_driver *drv = dev->driver; + + if (drv && drv->pm && drv->pm->complete) + drv->pm->complete(dev); +} + +#ifdef CONFIG_SUSPEND + +static int pci_pm_suspend(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct device_driver *drv = dev->driver; + int error = 0; + + if (drv && drv->pm) { + if (drv->pm->suspend) { + error = drv->pm->suspend(dev); + suspend_report_result(drv->pm->suspend, error); + } else { + pci_default_pm_suspend(pci_dev); + } + } else { + error = pci_legacy_suspend(dev, PMSG_SUSPEND); + } + pci_fixup_device(pci_fixup_suspend, pci_dev); + + return error; +} + +static int pci_pm_suspend_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); struct pci_driver *drv = pci_dev->driver; + int error = 0; - if (drv && drv->shutdown) - drv->shutdown(pci_dev); - pci_msi_shutdown(pci_dev); - pci_msix_shutdown(pci_dev); + if (drv && drv->pm) { + if (drv->pm->suspend_noirq) { + error = drv->pm->suspend_noirq(dev); + suspend_report_result(drv->pm->suspend_noirq, error); + } + } else { + error = pci_legacy_suspend_late(dev, PMSG_SUSPEND); + } + + return error; +} + +static int pci_pm_resume(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct device_driver *drv = dev->driver; + int error; + + pci_fixup_device(pci_fixup_resume, pci_dev); + + if (drv && drv->pm) { + error = drv->pm->resume ? drv->pm->resume(dev) : + pci_default_pm_resume(pci_dev); + } else { + error = pci_legacy_resume(dev); + } + + return error; +} + +static int pci_pm_resume_noirq(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct pci_driver *drv = pci_dev->driver; + int error = 0; + + pci_fixup_device(pci_fixup_resume_early, pci_dev); + + if (drv && drv->pm) { + if (drv->pm->resume_noirq) + error = drv->pm->resume_noirq(dev); + } else { + error = pci_legacy_resume_early(dev); + } + + return error; +} + +#else /* !CONFIG_SUSPEND */ + +#define pci_pm_suspend NULL +#define pci_pm_suspend_noirq NULL +#define pci_pm_resume NULL +#define pci_pm_resume_noirq NULL + +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_HIBERNATION + +static int pci_pm_freeze(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct device_driver *drv = dev->driver; + int error = 0; + + if (drv && drv->pm) { + if (drv->pm->freeze) { + error = drv->pm->freeze(dev); + suspend_report_result(drv->pm->freeze, error); + } else { + pci_default_pm_suspend(pci_dev); + } + } else { + error = pci_legacy_suspend(dev, PMSG_FREEZE); + pci_fixup_device(pci_fixup_suspend, pci_dev); + } + + return error; +} + +static int pci_pm_freeze_noirq(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct pci_driver *drv = pci_dev->driver; + int error = 0; + + if (drv && drv->pm) { + if (drv->pm->freeze_noirq) { + error = drv->pm->freeze_noirq(dev); + suspend_report_result(drv->pm->freeze_noirq, error); + } + } else { + error = pci_legacy_suspend_late(dev, PMSG_FREEZE); + } + + return error; +} + +static int pci_pm_thaw(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int error = 0; + + if (drv && drv->pm) { + if (drv->pm->thaw) + error = drv->pm->thaw(dev); + } else { + pci_fixup_device(pci_fixup_resume, to_pci_dev(dev)); + error = pci_legacy_resume(dev); + } + + return error; +} + +static int pci_pm_thaw_noirq(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct pci_driver *drv = pci_dev->driver; + int error = 0; + + if (drv && drv->pm) { + if (drv->pm->thaw_noirq) + error = drv->pm->thaw_noirq(dev); + } else { + pci_fixup_device(pci_fixup_resume_early, pci_dev); + error = pci_legacy_resume_early(dev); + } + + return error; +} + +static int pci_pm_poweroff(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int error = 0; + + pci_fixup_device(pci_fixup_suspend, to_pci_dev(dev)); + + if (drv && drv->pm) { + if (drv->pm->poweroff) { + error = drv->pm->poweroff(dev); + suspend_report_result(drv->pm->poweroff, error); + } + } else { + error = pci_legacy_suspend(dev, PMSG_HIBERNATE); + } + + return error; +} + +static int pci_pm_poweroff_noirq(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct pci_driver *drv = pci_dev->driver; + int error = 0; + + if (drv && drv->pm) { + if (drv->pm->poweroff_noirq) { + error = drv->pm->poweroff_noirq(dev); + suspend_report_result(drv->pm->poweroff_noirq, error); + } + } else { + error = pci_legacy_suspend_late(dev, PMSG_HIBERNATE); + } + + return error; +} + +static int pci_pm_restore(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct device_driver *drv = dev->driver; + int error; + + if (drv && drv->pm) { + error = drv->pm->restore ? drv->pm->restore(dev) : + pci_default_pm_resume(pci_dev); + } else { + error = pci_legacy_resume(dev); + } + pci_fixup_device(pci_fixup_resume, pci_dev); + + return error; +} + +static int pci_pm_restore_noirq(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct pci_driver *drv = pci_dev->driver; + int error = 0; + + pci_fixup_device(pci_fixup_resume, pci_dev); + + if (drv && drv->pm) { + if (drv->pm->restore_noirq) + error = drv->pm->restore_noirq(dev); + } else { + error = pci_legacy_resume_early(dev); + } + pci_fixup_device(pci_fixup_resume_early, pci_dev); + + return error; } +#else /* !CONFIG_HIBERNATION */ + +#define pci_pm_freeze NULL +#define pci_pm_freeze_noirq NULL +#define pci_pm_thaw NULL +#define pci_pm_thaw_noirq NULL +#define pci_pm_poweroff NULL +#define pci_pm_poweroff_noirq NULL +#define pci_pm_restore NULL +#define pci_pm_restore_noirq NULL + +#endif /* !CONFIG_HIBERNATION */ + +struct pm_ext_ops pci_pm_ops = { + .base = { + .prepare = pci_pm_prepare, + .complete = pci_pm_complete, + .suspend = pci_pm_suspend, + .resume = pci_pm_resume, + .freeze = pci_pm_freeze, + .thaw = pci_pm_thaw, + .poweroff = pci_pm_poweroff, + .restore = pci_pm_restore, + }, + .suspend_noirq = pci_pm_suspend_noirq, + .resume_noirq = pci_pm_resume_noirq, + .freeze_noirq = pci_pm_freeze_noirq, + .thaw_noirq = pci_pm_thaw_noirq, + .poweroff_noirq = pci_pm_poweroff_noirq, + .restore_noirq = pci_pm_restore_noirq, +}; + +#define PCI_PM_OPS_PTR &pci_pm_ops + +#else /* !CONFIG_PM_SLEEP */ + +#define PCI_PM_OPS_PTR NULL + +#endif /* !CONFIG_PM_SLEEP */ + /** * __pci_register_driver - register a new pci driver * @drv: the driver structure to register @@ -390,6 +690,9 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner, drv->driver.owner = owner; drv->driver.mod_name = mod_name; + if (drv->pm) + drv->driver.pm = &drv->pm->base; + spin_lock_init(&drv->dynids.lock); INIT_LIST_HEAD(&drv->dynids.list); @@ -515,12 +818,9 @@ struct bus_type pci_bus_type = { .uevent = pci_uevent, .probe = pci_device_probe, .remove = pci_device_remove, - .suspend = pci_device_suspend, - .suspend_late = pci_device_suspend_late, - .resume_early = pci_device_resume_early, - .resume = pci_device_resume, .shutdown = pci_device_shutdown, .dev_attrs = pci_dev_attrs, + .pm = PCI_PM_OPS_PTR, }; static int __init pci_driver_init(void) diff --git a/include/linux/pci.h b/include/linux/pci.h index 700704e..507ee52 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -389,7 +389,7 @@ struct pci_driver { int (*resume_early) (struct pci_dev *dev); int (*resume) (struct pci_dev *dev); /* Device woken up */ void (*shutdown) (struct pci_dev *dev); - + struct pm_ext_ops *pm; struct pci_error_handlers *err_handler; struct device_driver driver; struct pci_dynids dynids; -- cgit v0.10.2 From 25e18499e08cb097cbbfeab5de25d094d5312ee5 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 21 May 2008 01:40:43 +0200 Subject: Implement new suspend and hibernation callbacks for platform busses Implement new suspend and hibernation callbacks for the platform bus type. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Greg KH Signed-off-by: Jesse Barnes diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 911ec60..3f94039 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -453,6 +453,8 @@ int platform_driver_register(struct platform_driver *drv) drv->driver.suspend = platform_drv_suspend; if (drv->resume) drv->driver.resume = platform_drv_resume; + if (drv->pm) + drv->driver.pm = &drv->pm->base; return driver_register(&drv->driver); } EXPORT_SYMBOL_GPL(platform_driver_register); @@ -560,7 +562,9 @@ static int platform_match(struct device *dev, struct device_driver *drv) return (strncmp(pdev->name, drv->name, BUS_ID_SIZE) == 0); } -static int platform_suspend(struct device *dev, pm_message_t mesg) +#ifdef CONFIG_PM_SLEEP + +static int platform_legacy_suspend(struct device *dev, pm_message_t mesg) { int ret = 0; @@ -570,7 +574,7 @@ static int platform_suspend(struct device *dev, pm_message_t mesg) return ret; } -static int platform_suspend_late(struct device *dev, pm_message_t mesg) +static int platform_legacy_suspend_late(struct device *dev, pm_message_t mesg) { struct platform_driver *drv = to_platform_driver(dev->driver); struct platform_device *pdev; @@ -583,7 +587,7 @@ static int platform_suspend_late(struct device *dev, pm_message_t mesg) return ret; } -static int platform_resume_early(struct device *dev) +static int platform_legacy_resume_early(struct device *dev) { struct platform_driver *drv = to_platform_driver(dev->driver); struct platform_device *pdev; @@ -596,7 +600,7 @@ static int platform_resume_early(struct device *dev) return ret; } -static int platform_resume(struct device *dev) +static int platform_legacy_resume(struct device *dev) { int ret = 0; @@ -606,15 +610,291 @@ static int platform_resume(struct device *dev) return ret; } +static int platform_pm_prepare(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm && drv->pm->prepare) + ret = drv->pm->prepare(dev); + + return ret; +} + +static void platform_pm_complete(struct device *dev) +{ + struct device_driver *drv = dev->driver; + + if (drv && drv->pm && drv->pm->complete) + drv->pm->complete(dev); +} + +#ifdef CONFIG_SUSPEND + +static int platform_pm_suspend(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->suspend) + ret = drv->pm->suspend(dev); + } else { + ret = platform_legacy_suspend(dev, PMSG_SUSPEND); + } + + return ret; +} + +static int platform_pm_suspend_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->suspend_noirq) + ret = pdrv->pm->suspend_noirq(dev); + } else { + ret = platform_legacy_suspend_late(dev, PMSG_SUSPEND); + } + + return ret; +} + +static int platform_pm_resume(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->resume) + ret = drv->pm->resume(dev); + } else { + ret = platform_legacy_resume(dev); + } + + return ret; +} + +static int platform_pm_resume_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->resume_noirq) + ret = pdrv->pm->resume_noirq(dev); + } else { + ret = platform_legacy_resume_early(dev); + } + + return ret; +} + +#else /* !CONFIG_SUSPEND */ + +#define platform_pm_suspend NULL +#define platform_pm_resume NULL +#define platform_pm_suspend_noirq NULL +#define platform_pm_resume_noirq NULL + +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_HIBERNATION + +static int platform_pm_freeze(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->freeze) + ret = drv->pm->freeze(dev); + } else { + ret = platform_legacy_suspend(dev, PMSG_FREEZE); + } + + return ret; +} + +static int platform_pm_freeze_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->freeze_noirq) + ret = pdrv->pm->freeze_noirq(dev); + } else { + ret = platform_legacy_suspend_late(dev, PMSG_FREEZE); + } + + return ret; +} + +static int platform_pm_thaw(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->thaw) + ret = drv->pm->thaw(dev); + } else { + ret = platform_legacy_resume(dev); + } + + return ret; +} + +static int platform_pm_thaw_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->thaw_noirq) + ret = pdrv->pm->thaw_noirq(dev); + } else { + ret = platform_legacy_resume_early(dev); + } + + return ret; +} + +static int platform_pm_poweroff(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->poweroff) + ret = drv->pm->poweroff(dev); + } else { + ret = platform_legacy_suspend(dev, PMSG_HIBERNATE); + } + + return ret; +} + +static int platform_pm_poweroff_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->poweroff_noirq) + ret = pdrv->pm->poweroff_noirq(dev); + } else { + ret = platform_legacy_suspend_late(dev, PMSG_HIBERNATE); + } + + return ret; +} + +static int platform_pm_restore(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->restore) + ret = drv->pm->restore(dev); + } else { + ret = platform_legacy_resume(dev); + } + + return ret; +} + +static int platform_pm_restore_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->restore_noirq) + ret = pdrv->pm->restore_noirq(dev); + } else { + ret = platform_legacy_resume_early(dev); + } + + return ret; +} + +#else /* !CONFIG_HIBERNATION */ + +#define platform_pm_freeze NULL +#define platform_pm_thaw NULL +#define platform_pm_poweroff NULL +#define platform_pm_restore NULL +#define platform_pm_freeze_noirq NULL +#define platform_pm_thaw_noirq NULL +#define platform_pm_poweroff_noirq NULL +#define platform_pm_restore_noirq NULL + +#endif /* !CONFIG_HIBERNATION */ + +struct pm_ext_ops platform_pm_ops = { + .base = { + .prepare = platform_pm_prepare, + .complete = platform_pm_complete, + .suspend = platform_pm_suspend, + .resume = platform_pm_resume, + .freeze = platform_pm_freeze, + .thaw = platform_pm_thaw, + .poweroff = platform_pm_poweroff, + .restore = platform_pm_restore, + }, + .suspend_noirq = platform_pm_suspend_noirq, + .resume_noirq = platform_pm_resume_noirq, + .freeze_noirq = platform_pm_freeze_noirq, + .thaw_noirq = platform_pm_thaw_noirq, + .poweroff_noirq = platform_pm_poweroff_noirq, + .restore_noirq = platform_pm_restore_noirq, +}; + +#define PLATFORM_PM_OPS_PTR &platform_pm_ops + +#else /* !CONFIG_PM_SLEEP */ + +#define PLATFORM_PM_OPS_PTR NULL + +#endif /* !CONFIG_PM_SLEEP */ + struct bus_type platform_bus_type = { .name = "platform", .dev_attrs = platform_dev_attrs, .match = platform_match, .uevent = platform_uevent, - .suspend = platform_suspend, - .suspend_late = platform_suspend_late, - .resume_early = platform_resume_early, - .resume = platform_resume, + .pm = PLATFORM_PM_OPS_PTR, }; EXPORT_SYMBOL_GPL(platform_bus_type); diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 3261681..95ac21a 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -53,6 +53,7 @@ struct platform_driver { int (*suspend_late)(struct platform_device *, pm_message_t state); int (*resume_early)(struct platform_device *); int (*resume)(struct platform_device *); + struct pm_ext_ops *pm; struct device_driver driver; }; -- cgit v0.10.2 From e7891c733f9b26c851edde50cf886a30bd133dbd Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 22 May 2008 14:35:21 -0700 Subject: PCI/x86: write_pci_config_byte fix offset also add write_pci_config_16 Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c index 42df4b6..8e2821e 100644 --- a/arch/x86/pci/early.c +++ b/arch/x86/pci/early.c @@ -49,7 +49,14 @@ void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val) { PDprintk("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); - outb(val, 0xcfc); + outb(val, 0xcfc + (offset&3)); +} + +void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val) +{ + PDprintk("%x writing to %x: %x\n", slot, offset, val); + outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); + outw(val, 0xcfc + (offset&2)); } int early_pci_allowed(void) diff --git a/include/asm-x86/pci-direct.h b/include/asm-x86/pci-direct.h index 5b21485..7bd40b4 100644 --- a/include/asm-x86/pci-direct.h +++ b/include/asm-x86/pci-direct.h @@ -11,6 +11,7 @@ extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset); extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset); extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val); extern void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val); +extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val); extern int early_pci_allowed(void); -- cgit v0.10.2 From e3f2baebf4209b5927e23fa65d5977d31db936b3 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 22 May 2008 14:35:11 -0700 Subject: PCI/x86: early dump pci conf space v2 Allows us to dump PCI space before any kernel changes have been made. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff128..524b685 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -361,6 +361,11 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); +#ifdef CONFIG_PCI + if (pci_early_dump_regs) + early_dump_pci_devices(); +#endif + #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT if (init_ohci1394_dma_early) init_ohci1394_dma_on_all_controllers(); diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 3a5261b..d19fd07 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -20,6 +20,7 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | PCI_PROBE_MMCONF; +unsigned int pci_early_dump_regs; static int pci_bf_sort; int pci_routeirq; int pcibios_last_bus = -1; @@ -511,6 +512,9 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "use_crs")) { pci_probe |= PCI_USE__CRS; return NULL; + } else if (!strcmp(str, "earlydump")) { + pci_early_dump_regs = 1; + return NULL; } else if (!strcmp(str, "routeirq")) { pci_routeirq = 1; return NULL; diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c index 8e2821e..858dbe3 100644 --- a/arch/x86/pci/early.c +++ b/arch/x86/pci/early.c @@ -64,3 +64,54 @@ int early_pci_allowed(void) return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) == PCI_PROBE_CONF1; } + +void early_dump_pci_device(u8 bus, u8 slot, u8 func) +{ + int i; + int j; + u32 val; + + printk("PCI: %02x:%02x:%02x", bus, slot, func); + + for (i = 0; i < 256; i += 4) { + if (!(i & 0x0f)) + printk("\n%04x:",i); + + val = read_pci_config(bus, slot, func, i); + for (j = 0; j < 4; j++) { + printk(" %02x", val & 0xff); + val >>= 8; + } + } + printk("\n"); +} + +void early_dump_pci_devices(void) +{ + unsigned bus, slot, func; + + if (!early_pci_allowed()) + return; + + for (bus = 0; bus < 256; bus++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + u32 class; + u8 type; + class = read_pci_config(bus, slot, func, + PCI_CLASS_REVISION); + if (class == 0xffffffff) + break; + + early_dump_pci_device(bus, slot, func); + + /* No multi-function device? */ + type = read_pci_config_byte(bus, slot, func, + PCI_HEADER_TYPE); + if (!(type & 0x80)) + break; + } + } + } +} + diff --git a/include/asm-x86/pci-direct.h b/include/asm-x86/pci-direct.h index 7bd40b4..80c775d 100644 --- a/include/asm-x86/pci-direct.h +++ b/include/asm-x86/pci-direct.h @@ -15,4 +15,7 @@ extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val); extern int early_pci_allowed(void); +extern unsigned int pci_early_dump_regs; +extern void early_dump_pci_device(u8 bus, u8 slot, u8 func); +extern void early_dump_pci_devices(void); #endif -- cgit v0.10.2 From b143b3cc82fac459feb1abdffb1d77be9805adaa Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 28 May 2008 14:56:00 +0900 Subject: pciehp: remove redundant pci_dev initialization Remove the redundant initialization of pci_dev member of struct controller in pciehp_probe(). It is initialized in pcie_init(). Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 86d04c6..54553b1 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -454,7 +454,6 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ INIT_LIST_HEAD(&ctrl->slot_list); pdev = dev->port; - ctrl->pci_dev = pdev; rc = pcie_init(ctrl, dev); if (rc) { -- cgit v0.10.2 From 125c39f7d233de28f342d80858025ffed0c4b7f4 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 28 May 2008 14:57:30 +0900 Subject: pciehp: evaluate _OSC/OSHP before controller init Current pciehp evaluates _OSC/OSHP method after some controller initialization is done. So if evaluating _OSC/OSHP is failed, we need to cleanup already initialized data structures or hardware. This clearly is not robust way. With this patch, _OSC/OSHP evaluation is done first. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 79c9dda..084b73e 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -202,6 +202,7 @@ struct hpc_ops { #include #include +extern int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev); #define pciehp_get_hp_hw_control_from_firmware(dev) \ pciehp_acpi_get_hp_hw_control_from_firmware(dev) static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev, diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 54553b1..49414e9 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -444,7 +444,13 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ struct controller *ctrl; struct slot *t_slot; u8 value; - struct pci_dev *pdev; + struct pci_dev *pdev = dev->port; + + if (pciehp_force) + dbg("Bypassing BIOS check for pciehp use on %s\n", + pci_name(pdev)); + else if (pciehp_get_hp_hw_control_from_firmware(pdev)) + goto err_out_none; ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); if (!ctrl) { @@ -453,8 +459,6 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ } INIT_LIST_HEAD(&ctrl->slot_list); - pdev = dev->port; - rc = pcie_init(ctrl, dev); if (rc) { dbg("%s: controller initialization failed\n", PCIE_MODULE_NAME); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 79f1049..6339c63 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -1018,7 +1018,7 @@ static struct hpc_ops pciehp_hpc_ops = { }; #ifdef CONFIG_ACPI -static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev) +int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev) { acpi_status status; acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev)); @@ -1122,23 +1122,10 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev) if (pcie_write_cmd(ctrl, cmd, mask)) { err("%s: Cannot enable software notification\n", __func__); - goto abort; + return -1; } - if (pciehp_force) - dbg("Bypassing BIOS check for pciehp use on %s\n", - pci_name(ctrl->pci_dev)); - else if (pciehp_get_hp_hw_control_from_firmware(ctrl->pci_dev)) - goto abort_disable_intr; - return 0; - - /* We end up here for the many possible ways to fail this API. */ -abort_disable_intr: - if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE)) - err("%s : disabling interrupts failed\n", __func__); -abort: - return -1; } static inline void dbg_ctrl(struct controller *ctrl) -- cgit v0.10.2 From d737bdc141f0f040171fffbb7f9e08a825b27aab Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 28 May 2008 14:59:44 +0900 Subject: pciehp: block signals while waiting for command completion Since we need to wait for command completion for muximum 1sec, waiting command should not be interrupted by a signal. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 6339c63..7e3a3d1 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -268,9 +268,8 @@ completed: return timeout; } -static inline int pcie_wait_cmd(struct controller *ctrl, int poll) +static inline void pcie_wait_cmd(struct controller *ctrl, int poll) { - int retval = 0; unsigned int msecs = pciehp_poll_mode ? 2500 : 1000; unsigned long timeout = msecs_to_jiffies(msecs); int rc; @@ -278,16 +277,9 @@ static inline int pcie_wait_cmd(struct controller *ctrl, int poll) if (poll) rc = pcie_poll_cmd(ctrl); else - rc = wait_event_interruptible_timeout(ctrl->queue, - !ctrl->cmd_busy, timeout); + rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout); if (!rc) dbg("Command not completed in 1000 msec\n"); - else if (rc < 0) { - retval = -EINTR; - info("Command was interrupted by a signal\n"); - } - - return retval; } /** @@ -365,7 +357,7 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) if (!(slot_ctrl & HP_INTR_ENABLE) || !(slot_ctrl & CMD_CMPL_INTR_ENABLE)) poll = 1; - retval = pcie_wait_cmd(ctrl, poll); + pcie_wait_cmd(ctrl, poll); } out: mutex_unlock(&ctrl->ctrl_lock); @@ -797,7 +789,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) if (intr_loc & CMD_COMPLETED) { ctrl->cmd_busy = 0; smp_mb(); - wake_up_interruptible(&ctrl->queue); + wake_up(&ctrl->queue); } if (!(intr_loc & ~CMD_COMPLETED)) -- cgit v0.10.2 From ac9c052d10d8d6f46a30cb46c0d6d753997c299f Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 28 May 2008 15:01:03 +0900 Subject: shpchp: check firmware before taking control Fix the following problems of shpchp driver about getting hotplug control from firmware. - The shpchp driver must not control the hotplug controller if it fails to get control from the firmware. But current shpchp controls the hotplug controller regardless the result, because it doesn't check the return value of get_hp_hw_control_from_firmware(). - Current shpchp driver doesn't support _OSC. The pciehp driver already have the code for evaluating _OSC and OSHP and shpchp and pciehp can share it. So this patch move that code from pciehp to acpi_pcihp.c. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index f8c187a..93e37f0 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -299,7 +300,7 @@ free_and_return: * * @handle - the handle of the hotplug controller. */ -acpi_status acpi_run_oshp(acpi_handle handle) +static acpi_status acpi_run_oshp(acpi_handle handle) { acpi_status status; struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -322,9 +323,6 @@ acpi_status acpi_run_oshp(acpi_handle handle) kfree(string.pointer); return status; } -EXPORT_SYMBOL_GPL(acpi_run_oshp); - - /* acpi_get_hp_params_from_firmware * @@ -374,6 +372,85 @@ acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, } EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware); +/** + * acpi_get_hp_hw_control_from_firmware + * @dev: the pci_dev of the bridge that has a hotplug controller + * @flags: requested control bits for _OSC + * + * Attempt to take hotplug control from firmware. + */ +int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags) +{ + acpi_status status; + acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev)); + struct pci_dev *pdev = dev; + struct pci_bus *parent; + struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL }; + + flags &= (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL | + OSC_SHPC_NATIVE_HP_CONTROL | + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + if (!flags) { + err("Invalid flags %u specified!\n", flags); + return -EINVAL; + } + + /* + * Per PCI firmware specification, we should run the ACPI _OSC + * method to get control of hotplug hardware before using it. If + * an _OSC is missing, we look for an OSHP to do the same thing. + * To handle different BIOS behavior, we look for _OSC and OSHP + * within the scope of the hotplug controller and its parents, + * upto the host bridge under which this controller exists. + */ + while (!handle) { + /* + * This hotplug controller was not listed in the ACPI name + * space at all. Try to get acpi handle of parent pci bus. + */ + if (!pdev || !pdev->bus->parent) + break; + parent = pdev->bus->parent; + dbg("Could not find %s in acpi namespace, trying parent\n", + pci_name(pdev)); + if (!parent->self) + /* Parent must be a host bridge */ + handle = acpi_get_pci_rootbridge_handle( + pci_domain_nr(parent), + parent->number); + else + handle = DEVICE_ACPI_HANDLE(&(parent->self->dev)); + pdev = parent->self; + } + + while (handle) { + acpi_get_name(handle, ACPI_FULL_PATHNAME, &string); + dbg("Trying to get hotplug control for %s \n", + (char *)string.pointer); + status = pci_osc_control_set(handle, flags); + if (status == AE_NOT_FOUND) + status = acpi_run_oshp(handle); + if (ACPI_SUCCESS(status)) { + dbg("Gained control for hotplug HW for pci %s (%s)\n", + pci_name(dev), (char *)string.pointer); + kfree(string.pointer); + return 0; + } + if (acpi_root_bridge(handle)) + break; + chandle = handle; + status = acpi_get_parent(chandle, &handle); + if (ACPI_FAILURE(status)) + break; + } + + dbg("Cannot get control of hotplug hardware for pci %s\n", + pci_name(dev)); + + kfree(string.pointer); + return -ENODEV; +} +EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware); /* acpi_root_bridge - check to see if this acpi object is a root bridge * diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 084b73e..8492fab 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -202,9 +202,13 @@ struct hpc_ops { #include #include -extern int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev); -#define pciehp_get_hp_hw_control_from_firmware(dev) \ - pciehp_acpi_get_hp_hw_control_from_firmware(dev) +static inline int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev) +{ + u32 flags = (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL | + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + return acpi_get_hp_hw_control_from_firmware(dev, flags); +} + static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev, struct hotplug_params *hpp) { diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 7e3a3d1..a48021d 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -1009,75 +1009,6 @@ static struct hpc_ops pciehp_hpc_ops = { .check_lnk_status = hpc_check_lnk_status, }; -#ifdef CONFIG_ACPI -int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev) -{ - acpi_status status; - acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev)); - struct pci_dev *pdev = dev; - struct pci_bus *parent; - struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL }; - - /* - * Per PCI firmware specification, we should run the ACPI _OSC - * method to get control of hotplug hardware before using it. - * If an _OSC is missing, we look for an OSHP to do the same thing. - * To handle different BIOS behavior, we look for _OSC and OSHP - * within the scope of the hotplug controller and its parents, upto - * the host bridge under which this controller exists. - */ - while (!handle) { - /* - * This hotplug controller was not listed in the ACPI name - * space at all. Try to get acpi handle of parent pci bus. - */ - if (!pdev || !pdev->bus->parent) - break; - parent = pdev->bus->parent; - dbg("Could not find %s in acpi namespace, trying parent\n", - pci_name(pdev)); - if (!parent->self) - /* Parent must be a host bridge */ - handle = acpi_get_pci_rootbridge_handle( - pci_domain_nr(parent), - parent->number); - else - handle = DEVICE_ACPI_HANDLE( - &(parent->self->dev)); - pdev = parent->self; - } - - while (handle) { - acpi_get_name(handle, ACPI_FULL_PATHNAME, &string); - dbg("Trying to get hotplug control for %s \n", - (char *)string.pointer); - status = pci_osc_control_set(handle, - OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL | - OSC_PCI_EXPRESS_NATIVE_HP_CONTROL); - if (status == AE_NOT_FOUND) - status = acpi_run_oshp(handle); - if (ACPI_SUCCESS(status)) { - dbg("Gained control for hotplug HW for pci %s (%s)\n", - pci_name(dev), (char *)string.pointer); - kfree(string.pointer); - return 0; - } - if (acpi_root_bridge(handle)) - break; - chandle = handle; - status = acpi_get_parent(chandle, &handle); - if (ACPI_FAILURE(status)) - break; - } - - dbg("Cannot get control of hotplug hardware for pci %s\n", - pci_name(dev)); - - kfree(string.pointer); - return -1; -} -#endif - static int pcie_init_hardware_part1(struct controller *ctrl, struct pcie_device *dev) { diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index f66e8d6..8a026f7 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -170,6 +170,7 @@ extern void shpchp_queue_pushbutton_work(struct work_struct *work); extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev); #ifdef CONFIG_ACPI +#include static inline int get_hp_params_from_firmware(struct pci_dev *dev, struct hotplug_params *hpp) { @@ -177,14 +178,15 @@ static inline int get_hp_params_from_firmware(struct pci_dev *dev, return -ENODEV; return 0; } -#define get_hp_hw_control_from_firmware(pdev) \ - do { \ - if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \ - acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev)));\ - } while (0) + +static inline int get_hp_hw_control_from_firmware(struct pci_dev *dev) +{ + u32 flags = OSC_SHPC_NATIVE_HP_CONTROL; + return acpi_get_hp_hw_control_from_firmware(dev, flags); +} #else #define get_hp_params_from_firmware(dev, hpp) (-ENODEV) -#define get_hp_hw_control_from_firmware(dev) do { } while (0) +#define get_hp_hw_control_from_firmware(dev) (0) #endif struct ctrl_reg { diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 0066b0b..df41ecc 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -330,13 +330,14 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp static int is_shpc_capable(struct pci_dev *dev) { - if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == - PCI_DEVICE_ID_AMD_GOLAM_7450)) - return 1; - if (pci_find_capability(dev, PCI_CAP_ID_SHPC)) - return 1; - - return 0; + if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == + PCI_DEVICE_ID_AMD_GOLAM_7450)) + return 1; + if (!pci_find_capability(dev, PCI_CAP_ID_SHPC)) + return 0; + if (get_hp_hw_control_from_firmware(dev)) + return 0; + return 1; } static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 7d770b2..7a0bff3 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -1084,7 +1084,6 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __func__, pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), pdev->irq); - get_hp_hw_control_from_firmware(pdev); /* * If this is the first controller to be initialized, diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 8f67e8f..dbdcd1a 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -227,9 +227,9 @@ struct hotplug_params { #include #include #include -extern acpi_status acpi_run_oshp(acpi_handle handle); extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, struct hotplug_params *hpp); +int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); int acpi_root_bridge(acpi_handle handle); #endif #endif -- cgit v0.10.2 From d8b23e8ffb567758fc6074e97210ddb42114827c Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Mon, 2 Jun 2008 09:07:46 -0700 Subject: pciehp: fixes typo in dbg_ctrl() in pciehp_hpc.c Fixup a typo in dbg_ctrl(); it was fetching SLOTSTATUS twice. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index a48021d..eeb517b 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -1086,7 +1086,7 @@ static inline void dbg_ctrl(struct controller *ctrl) dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes"); pciehp_readw(ctrl, SLOTSTATUS, ®16); dbg("Slot Status : 0x%04x\n", reg16); - pciehp_readw(ctrl, SLOTSTATUS, ®16); + pciehp_readw(ctrl, SLOTCTRL, ®16); dbg("Slot Control : 0x%04x\n", reg16); } -- cgit v0.10.2 From 6a3f084971bad985722afe25b16a5c0a990cea75 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Mon, 2 Jun 2008 09:22:34 -0700 Subject: pciehp: removes redundant NULL write to slot status register Cleanup to remove a redundant NULL write to SLOTSTATUS. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index eeb517b..0cfaedf 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -777,7 +777,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) intr_loc |= detected; if (!intr_loc) return IRQ_NONE; - if (pciehp_writew(ctrl, SLOTSTATUS, detected)) { + if (detected && pciehp_writew(ctrl, SLOTSTATUS, detected)) { err("%s: Cannot write to SLOTSTATUS\n", __func__); return IRQ_NONE; } -- cgit v0.10.2 From ece6763419f44ed72f4fc78752e5f5364df1794b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 29 May 2008 15:04:38 +0200 Subject: PCI: eliminate double kfree in intel-iommu initialization The destination of goto error also does a kfree(g_iommus), so it is not correct to do one here. This was found using Coccinelle (http://www.emn.fr/x-info/coccinelle/). Signed-off-by: Julia Lawall Signed-off-by: Jesse Barnes diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 66c0fd2..4f05d91 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1725,7 +1725,6 @@ int __init init_dmars(void) deferred_flush = kzalloc(g_num_of_iommus * sizeof(struct deferred_flush_tables), GFP_KERNEL); if (!deferred_flush) { - kfree(g_iommus); ret = -ENOMEM; goto error; } -- cgit v0.10.2 From 10260d9ab702454460242ef4d3ecfc49fcb96a5b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 4 Jun 2008 13:53:31 +0200 Subject: PCI: Unhide the SMBus on the Compaq Evo D510 One more machine with a hidden Intel SMBus. Unhiding it reveals a SMSC EMC6D100 hardware monitoring chip. I have checked that this machine has no ACPI magic touching the SMBus nor the hardware monitoring chip, so this should be safe. Signed-off-by: Jean Delvare Signed-off-by: Jesse Barnes diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 44aabb1..93faf84 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1054,6 +1054,12 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) * its on-board VGA controller */ asus_hides_smbus = 1; } + else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_IG) + switch(dev->subsystem_device) { + case 0x00b8: /* Compaq Evo D510 CMT */ + case 0x00b9: /* Compaq Evo D510 SFF */ + asus_hides_smbus = 1; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); @@ -1068,6 +1074,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, as DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG, asus_hides_smbus_hostbridge); static void asus_hides_smbus_lpc(struct pci_dev *dev) { -- cgit v0.10.2 From 5d9526d07a8dc87460c13c277b3edcc26b0e662f Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 4 Jun 2008 11:39:07 -0600 Subject: PCIe: fix 'symbol not declared' sparse warnings While refreshing my physical PCI slot series against upstream, I noticed a few simple sparse/compile warnings that were easy to fix. Fix the following sparse warnings in PCIe: drivers/pci/pcie/aer/aerdrv.c:86:6: warning: symbol 'pci_no_aer' was not declared. Should it be static? drivers/pci/pcie/portdrv_bus.c:21:17: warning: symbol 'pcie_port_bus_type' was not declared. Should it be static? Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 07c3bdb..b7a3aa6 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -26,6 +26,7 @@ #include #include "aerdrv.h" +#include "../../pci.h" /* * Version Information diff --git a/drivers/pci/pcie/portdrv_bus.c b/drivers/pci/pcie/portdrv_bus.c index 3f09768..359fe55 100644 --- a/drivers/pci/pcie/portdrv_bus.c +++ b/drivers/pci/pcie/portdrv_bus.c @@ -13,6 +13,7 @@ #include #include +#include "portdrv.h" static int pcie_port_bus_match(struct device *dev, struct device_driver *drv); static int pcie_port_bus_suspend(struct device *dev, pm_message_t state); -- cgit v0.10.2 From 27e468597315e5ce078fdd39856b7954b639183a Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sun, 8 Jun 2008 13:47:02 +0200 Subject: PCI: unhide the SMBus on the Compaq Deskpro EN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch unhides the SMBus on Compaq Deskpro EN SFF P667 with the Intel 815E chipset. Unhiding it reveals a THMC51 hardware monitoring chip. Jean Delvare has checked that this machine has no ACPI magic touching the SMBus nor the hardware monitoring chip, so this should be safe. The patch was tested on Fedora Core 9 with 2.6.25.4 kernel. Signed-off-by: Krzysztof Helt Tested-by: RafaÅ‚ HaÅ‚aduda CC: Jean Delvare Signed-off-by: Jesse Barnes diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 93faf84..92b52eb 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1060,6 +1060,14 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) case 0x00b9: /* Compaq Evo D510 SFF */ asus_hides_smbus = 1; } + else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) + switch (dev->subsystem_device) { + case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ + /* Motherboard doesn't have host bridge + * subvendor/subdevice IDs, therefore checking + * its on-board VGA controller */ + asus_hides_smbus = 1; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); @@ -1075,6 +1083,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, as DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); static void asus_hides_smbus_lpc(struct pci_dev *dev) { -- cgit v0.10.2 From 64dab20450184e6586c12704da11ce48a0918050 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 10 Jun 2008 14:20:03 -0700 Subject: PCI: update location of PCI hotplug mailing lists Just concentrate PCI traffic at linux-pci@vger rather than splitting it between vger and a sf.net moderated (!) mailing list. Acked-by: Matthew Wilcox Acked-by: Scott Murray Acked-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/MAINTAINERS b/MAINTAINERS index cb71eb4..89db949 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -248,7 +248,7 @@ S: Supported ACPI PCI HOTPLUG DRIVER P: Kristen Carlson Accardi M: kristen.c.accardi@intel.com -L: pcihpd-discuss@lists.sourceforge.net +L: linux-pci@vger.kernel.org S: Supported ACPI THERMAL DRIVER @@ -1134,21 +1134,21 @@ COMPACTPCI HOTPLUG CORE P: Scott Murray M: scottm@somanetworks.com M: scott@spiteful.org -L: pcihpd-discuss@lists.sourceforge.net +L: linux-pci@vger.kernel.org S: Supported COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER P: Scott Murray M: scottm@somanetworks.com M: scott@spiteful.org -L: pcihpd-discuss@lists.sourceforge.net +L: linux-pci@vger.kernel.org S: Supported COMPACTPCI HOTPLUG GENERIC DRIVER P: Scott Murray M: scottm@somanetworks.com M: scott@spiteful.org -L: pcihpd-discuss@lists.sourceforge.net +L: linux-pci@vger.kernel.org S: Supported COMPUTONE INTELLIPORT MULTIPORT CARD @@ -3177,7 +3177,7 @@ S: Supported PCIE HOTPLUG DRIVER P: Kristen Carlson Accardi M: kristen.c.accardi@intel.com -L: pcihpd-discuss@lists.sourceforge.net +L: linux-pci@vger.kernel.org S: Supported PCMCIA SUBSYSTEM @@ -3815,7 +3815,7 @@ S: Maintained SHPC HOTPLUG DRIVER P: Kristen Carlson Accardi M: kristen.c.accardi@intel.com -L: pcihpd-discuss@lists.sourceforge.net +L: linux-pci@vger.kernel.org S: Supported SECURE DIGITAL HOST CONTROLLER INTERFACE DRIVER -- cgit v0.10.2 From fe99740cac117f208707488c03f3789cf4904957 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 10 Jun 2008 15:27:37 -0600 Subject: PCI: construct one fakephp slot per PCI slot Register one slot per slot, rather than one slot per function. Change the name of the slot to fake%d instead of the pci address. Signed-off-by: Alex Chiang Signed-off-by: Matthew Wilcox Cc: Greg KH Cc: Kristen Carlson Accardi Cc: Len Brown Cc: Kenji Kaneshige Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 7e9a827..b57223f 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -66,6 +66,7 @@ struct dummy_slot { struct pci_dev *dev; struct work_struct remove_work; unsigned long removed; + char name[8]; }; static int debug; @@ -100,6 +101,7 @@ static int add_slot(struct pci_dev *dev) struct dummy_slot *dslot; struct hotplug_slot *slot; int retval = -ENOMEM; + static int count = 1; slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL); if (!slot) @@ -113,13 +115,13 @@ static int add_slot(struct pci_dev *dev) slot->info->max_bus_speed = PCI_SPEED_UNKNOWN; slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; - slot->name = &dev->dev.bus_id[0]; - dbg("slot->name = %s\n", slot->name); - dslot = kzalloc(sizeof(struct dummy_slot), GFP_KERNEL); if (!dslot) goto error_info; + slot->name = dslot->name; + snprintf(slot->name, sizeof(dslot->name), "fake%d", count++); + dbg("slot->name = %s\n", slot->name); slot->ops = &dummy_hotplug_slot_ops; slot->release = &dummy_release; slot->private = dslot; @@ -148,17 +150,17 @@ error: static int __init pci_scan_buses(void) { struct pci_dev *dev = NULL; - int retval = 0; + int lastslot = 0; while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - retval = add_slot(dev); - if (retval) { - pci_dev_put(dev); - break; - } + if (PCI_FUNC(dev->devfn) > 0 && + lastslot == PCI_SLOT(dev->devfn)) + continue; + lastslot = PCI_SLOT(dev->devfn); + add_slot(dev); } - return retval; + return 0; } static void remove_slot(struct dummy_slot *dslot) @@ -296,23 +298,9 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) return 0; } -/* find the hotplug_slot for the pci_dev */ -static struct hotplug_slot *get_slot_from_dev(struct pci_dev *dev) -{ - struct dummy_slot *dslot; - - list_for_each_entry(dslot, &slot_list, node) { - if (dslot->dev == dev) - return dslot->slot; - } - return NULL; -} - - static int disable_slot(struct hotplug_slot *slot) { struct dummy_slot *dslot; - struct hotplug_slot *hslot; struct pci_dev *dev; int func; @@ -322,41 +310,27 @@ static int disable_slot(struct hotplug_slot *slot) dbg("%s - physical_slot = %s\n", __func__, slot->name); - /* don't disable bridged devices just yet, we can't handle them easily... */ - if (dslot->dev->subordinate) { - err("Can't remove PCI devices with other PCI devices behind it yet.\n"); - return -ENODEV; - } - if (test_and_set_bit(0, &dslot->removed)) { - dbg("Slot already scheduled for removal\n"); - return -ENODEV; - } - /* search for subfunctions and disable them first */ - if (!(dslot->dev->devfn & 7)) { - for (func = 1; func < 8; func++) { - dev = pci_get_slot(dslot->dev->bus, - dslot->dev->devfn + func); - if (dev) { - hslot = get_slot_from_dev(dev); - if (hslot) - disable_slot(hslot); - else { - err("Hotplug slot not found for subfunction of PCI device\n"); - return -ENODEV; - } - pci_dev_put(dev); - } else - dbg("No device in slot found\n"); + for (func = 7; func >= 0; func--) { + dev = pci_get_slot(dslot->dev->bus, dslot->dev->devfn + func); + if (!dev) + continue; + + if (test_and_set_bit(0, &dslot->removed)) { + dbg("Slot already scheduled for removal\n"); + return -ENODEV; } - } - /* remove the device from the pci core */ - pci_remove_bus_device(dslot->dev); + /* queue work item to blow away this sysfs entry and other + * parts. + */ + INIT_WORK(&dslot->remove_work, remove_slot_worker); + queue_work(dummyphp_wq, &dslot->remove_work); - /* queue work item to blow away this sysfs entry and other parts. */ - INIT_WORK(&dslot->remove_work, remove_slot_worker); - queue_work(dummyphp_wq, &dslot->remove_work); + /* blow away this sysfs entry and other parts. */ + remove_slot(dslot); + pci_dev_put(dev); + } return 0; } -- cgit v0.10.2 From f46753c5e354b857b20ab8e0fe7b2579831dc369 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 10 Jun 2008 15:28:50 -0600 Subject: PCI: introduce pci_slot Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty Acked-by: Benjamin Herrenschmidt [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang Signed-off-by: Matthew Wilcox Cc: Greg KH Cc: Kristen Carlson Accardi Cc: Len Brown Acked-by: Kenji Kaneshige Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 4d1ce2e..7d63f8c 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -2,7 +2,7 @@ # Makefile for the PCI bus specific drivers. # -obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \ +obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \ pci-driver.o search.o pci-sysfs.o rom.o setup-res.o obj-$(CONFIG_PROC_FS) += proc.o diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 7a29164..eecf7cb 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -215,7 +215,6 @@ extern u8 acpiphp_get_power_status (struct acpiphp_slot *slot); extern u8 acpiphp_get_attention_status (struct acpiphp_slot *slot); extern u8 acpiphp_get_latch_status (struct acpiphp_slot *slot); extern u8 acpiphp_get_adapter_status (struct acpiphp_slot *slot); -extern u32 acpiphp_get_address (struct acpiphp_slot *slot); /* variables */ extern int acpiphp_debug; diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 7af68ba..0e496e8 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -70,7 +70,6 @@ static int disable_slot (struct hotplug_slot *slot); static int set_attention_status (struct hotplug_slot *slot, u8 value); static int get_power_status (struct hotplug_slot *slot, u8 *value); static int get_attention_status (struct hotplug_slot *slot, u8 *value); -static int get_address (struct hotplug_slot *slot, u32 *value); static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); @@ -83,7 +82,6 @@ static struct hotplug_slot_ops acpi_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_address = get_address, }; @@ -274,23 +272,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) return 0; } - -/** - * get_address - get pci address of a slot - * @hotplug_slot: slot to get status - * @value: pointer to struct pci_busdev (seg, bus, dev) - */ -static int get_address(struct hotplug_slot *hotplug_slot, u32 *value) -{ - struct slot *slot = hotplug_slot->private; - - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); - - *value = acpiphp_get_address(slot->acpi_slot); - - return 0; -} - static int __init init_acpi(void) { int retval; @@ -357,7 +338,11 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) acpiphp_slot->slot = slot; snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun); - retval = pci_hp_register(slot->hotplug_slot); + retval = pci_hp_register(slot->hotplug_slot, + acpiphp_slot->bridge->pci_bus, + acpiphp_slot->device); + if (retval == -EBUSY) + goto error_hpslot; if (retval) { err("pci_hp_register failed with error %d\n", retval); goto error_hpslot; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 648596d..9342c84 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -258,7 +258,12 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) bridge->pci_bus->number, slot->device); retval = acpiphp_register_hotplug_slot(slot); if (retval) { - warn("acpiphp_register_hotplug_slot failed(err code = 0x%x)\n", retval); + if (retval == -EBUSY) + warn("Slot %d already registered by another " + "hotplug driver\n", slot->sun); + else + warn("acpiphp_register_hotplug_slot failed " + "(err code = 0x%x)\n", retval); goto err_exit; } } @@ -1867,19 +1872,3 @@ u8 acpiphp_get_adapter_status(struct acpiphp_slot *slot) return (sta == 0) ? 0 : 1; } - - -/* - * pci address (seg/bus/dev) - */ -u32 acpiphp_get_address(struct acpiphp_slot *slot) -{ - u32 address; - struct pci_bus *pci_bus = slot->bridge->pci_bus; - - address = (pci_domain_nr(pci_bus) << 16) | - (pci_bus->number << 8) | - slot->device; - - return address; -} diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c index ede9051..2b7c45e 100644 --- a/drivers/pci/hotplug/acpiphp_ibm.c +++ b/drivers/pci/hotplug/acpiphp_ibm.c @@ -33,8 +33,10 @@ #include #include #include +#include #include "acpiphp.h" +#include "../pci.h" #define DRIVER_VERSION "1.0.1" #define DRIVER_AUTHOR "Irene Zubarev , Vernon Mauery " @@ -430,7 +432,7 @@ static int __init ibm_acpiphp_init(void) int retval = 0; acpi_status status; struct acpi_device *device; - struct kobject *sysdir = &pci_hotplug_slots_kset->kobj; + struct kobject *sysdir = &pci_slots_kset->kobj; dbg("%s\n", __func__); @@ -477,7 +479,7 @@ init_return: static void __exit ibm_acpiphp_exit(void) { acpi_status status; - struct kobject *sysdir = &pci_hotplug_slots_kset->kobj; + struct kobject *sysdir = &pci_slots_kset->kobj; dbg("%s\n", __func__); diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index d8a6b80..9359479 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -285,7 +285,7 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) info->attention_status = cpci_get_attention_status(slot); dbg("registering slot %s", slot->hotplug_slot->name); - status = pci_hp_register(slot->hotplug_slot); + status = pci_hp_register(slot->hotplug_slot, bus, i); if (status) { err("pci_hp_register failed with error %d", status); goto error_name; diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 36b115b..54defec 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -434,7 +434,9 @@ static int ctrl_slot_setup(struct controller *ctrl, slot->bus, slot->device, slot->number, ctrl->slot_device_offset, slot_number); - result = pci_hp_register(hotplug_slot); + result = pci_hp_register(hotplug_slot, + ctrl->pci_dev->subordinate, + slot->device); if (result) { err("pci_hp_register failed with error %d\n", result); goto error_name; diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index b57223f..40337a0 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -126,7 +126,7 @@ static int add_slot(struct pci_dev *dev) slot->release = &dummy_release; slot->private = dslot; - retval = pci_hp_register(slot); + retval = pci_hp_register(slot, dev->bus, PCI_SLOT(dev->devfn)); if (retval) { err("pci_hp_register failed with error %d\n", retval); goto error_dslot; diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index dca7efc..8467d02 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -1001,7 +1001,8 @@ static int __init ebda_rsrc_controller (void) tmp_slot = list_entry (list, struct slot, ibm_slot_list); snprintf (tmp_slot->hotplug_slot->name, 30, "%s", create_file_name (tmp_slot)); - pci_hp_register (tmp_slot->hotplug_slot); + pci_hp_register(tmp_slot->hotplug_slot, + pci_find_bus(0, tmp_slot->bus), tmp_slot->device); } print_ebda_hpc (); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index a11021e..4df31f3 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -40,6 +40,7 @@ #include #include #include +#include "../pci.h" #define MY_NAME "pci_hotplug" @@ -60,41 +61,7 @@ static int debug; ////////////////////////////////////////////////////////////////// static LIST_HEAD(pci_hotplug_slot_list); - -struct kset *pci_hotplug_slots_kset; - -static ssize_t hotplug_slot_attr_show(struct kobject *kobj, - struct attribute *attr, char *buf) -{ - struct hotplug_slot *slot = to_hotplug_slot(kobj); - struct hotplug_slot_attribute *attribute = to_hotplug_attr(attr); - return attribute->show ? attribute->show(slot, buf) : -EIO; -} - -static ssize_t hotplug_slot_attr_store(struct kobject *kobj, - struct attribute *attr, const char *buf, size_t len) -{ - struct hotplug_slot *slot = to_hotplug_slot(kobj); - struct hotplug_slot_attribute *attribute = to_hotplug_attr(attr); - return attribute->store ? attribute->store(slot, buf, len) : -EIO; -} - -static struct sysfs_ops hotplug_slot_sysfs_ops = { - .show = hotplug_slot_attr_show, - .store = hotplug_slot_attr_store, -}; - -static void hotplug_slot_release(struct kobject *kobj) -{ - struct hotplug_slot *slot = to_hotplug_slot(kobj); - if (slot->release) - slot->release(slot); -} - -static struct kobj_type hotplug_slot_ktype = { - .sysfs_ops = &hotplug_slot_sysfs_ops, - .release = &hotplug_slot_release, -}; +static DEFINE_SPINLOCK(pci_hotplug_slot_list_lock); /* these strings match up with the values in pci_bus_speed */ static char *pci_bus_speed_strings[] = { @@ -149,16 +116,15 @@ GET_STATUS(power_status, u8) GET_STATUS(attention_status, u8) GET_STATUS(latch_status, u8) GET_STATUS(adapter_status, u8) -GET_STATUS(address, u32) GET_STATUS(max_bus_speed, enum pci_bus_speed) GET_STATUS(cur_bus_speed, enum pci_bus_speed) -static ssize_t power_read_file (struct hotplug_slot *slot, char *buf) +static ssize_t power_read_file(struct pci_slot *slot, char *buf) { int retval; u8 value; - retval = get_power_status (slot, &value); + retval = get_power_status(slot->hotplug, &value); if (retval) goto exit; retval = sprintf (buf, "%d\n", value); @@ -166,9 +132,10 @@ exit: return retval; } -static ssize_t power_write_file (struct hotplug_slot *slot, const char *buf, +static ssize_t power_write_file(struct pci_slot *pci_slot, const char *buf, size_t count) { + struct hotplug_slot *slot = pci_slot->hotplug; unsigned long lpower; u8 power; int retval = 0; @@ -204,29 +171,30 @@ exit: return count; } -static struct hotplug_slot_attribute hotplug_slot_attr_power = { +static struct pci_slot_attribute hotplug_slot_attr_power = { .attr = {.name = "power", .mode = S_IFREG | S_IRUGO | S_IWUSR}, .show = power_read_file, .store = power_write_file }; -static ssize_t attention_read_file (struct hotplug_slot *slot, char *buf) +static ssize_t attention_read_file(struct pci_slot *slot, char *buf) { int retval; u8 value; - retval = get_attention_status (slot, &value); + retval = get_attention_status(slot->hotplug, &value); if (retval) goto exit; - retval = sprintf (buf, "%d\n", value); + retval = sprintf(buf, "%d\n", value); exit: return retval; } -static ssize_t attention_write_file (struct hotplug_slot *slot, const char *buf, +static ssize_t attention_write_file(struct pci_slot *slot, const char *buf, size_t count) { + struct hotplug_slot_ops *ops = slot->hotplug->ops; unsigned long lattention; u8 attention; int retval = 0; @@ -235,13 +203,13 @@ static ssize_t attention_write_file (struct hotplug_slot *slot, const char *buf, attention = (u8)(lattention & 0xff); dbg (" - attention = %d\n", attention); - if (!try_module_get(slot->ops->owner)) { + if (!try_module_get(ops->owner)) { retval = -ENODEV; goto exit; } - if (slot->ops->set_attention_status) - retval = slot->ops->set_attention_status(slot, attention); - module_put(slot->ops->owner); + if (ops->set_attention_status) + retval = ops->set_attention_status(slot->hotplug, attention); + module_put(ops->owner); exit: if (retval) @@ -249,18 +217,18 @@ exit: return count; } -static struct hotplug_slot_attribute hotplug_slot_attr_attention = { +static struct pci_slot_attribute hotplug_slot_attr_attention = { .attr = {.name = "attention", .mode = S_IFREG | S_IRUGO | S_IWUSR}, .show = attention_read_file, .store = attention_write_file }; -static ssize_t latch_read_file (struct hotplug_slot *slot, char *buf) +static ssize_t latch_read_file(struct pci_slot *slot, char *buf) { int retval; u8 value; - retval = get_latch_status (slot, &value); + retval = get_latch_status(slot->hotplug, &value); if (retval) goto exit; retval = sprintf (buf, "%d\n", value); @@ -269,17 +237,17 @@ exit: return retval; } -static struct hotplug_slot_attribute hotplug_slot_attr_latch = { +static struct pci_slot_attribute hotplug_slot_attr_latch = { .attr = {.name = "latch", .mode = S_IFREG | S_IRUGO}, .show = latch_read_file, }; -static ssize_t presence_read_file (struct hotplug_slot *slot, char *buf) +static ssize_t presence_read_file(struct pci_slot *slot, char *buf) { int retval; u8 value; - retval = get_adapter_status (slot, &value); + retval = get_adapter_status(slot->hotplug, &value); if (retval) goto exit; retval = sprintf (buf, "%d\n", value); @@ -288,42 +256,20 @@ exit: return retval; } -static struct hotplug_slot_attribute hotplug_slot_attr_presence = { +static struct pci_slot_attribute hotplug_slot_attr_presence = { .attr = {.name = "adapter", .mode = S_IFREG | S_IRUGO}, .show = presence_read_file, }; -static ssize_t address_read_file (struct hotplug_slot *slot, char *buf) -{ - int retval; - u32 address; - - retval = get_address (slot, &address); - if (retval) - goto exit; - retval = sprintf (buf, "%04x:%02x:%02x\n", - (address >> 16) & 0xffff, - (address >> 8) & 0xff, - address & 0xff); - -exit: - return retval; -} - -static struct hotplug_slot_attribute hotplug_slot_attr_address = { - .attr = {.name = "address", .mode = S_IFREG | S_IRUGO}, - .show = address_read_file, -}; - static char *unknown_speed = "Unknown bus speed"; -static ssize_t max_bus_speed_read_file (struct hotplug_slot *slot, char *buf) +static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf) { char *speed_string; int retval; enum pci_bus_speed value; - retval = get_max_bus_speed (slot, &value); + retval = get_max_bus_speed(slot->hotplug, &value); if (retval) goto exit; @@ -338,18 +284,18 @@ exit: return retval; } -static struct hotplug_slot_attribute hotplug_slot_attr_max_bus_speed = { +static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = { .attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO}, .show = max_bus_speed_read_file, }; -static ssize_t cur_bus_speed_read_file (struct hotplug_slot *slot, char *buf) +static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf) { char *speed_string; int retval; enum pci_bus_speed value; - retval = get_cur_bus_speed (slot, &value); + retval = get_cur_bus_speed(slot->hotplug, &value); if (retval) goto exit; @@ -364,14 +310,15 @@ exit: return retval; } -static struct hotplug_slot_attribute hotplug_slot_attr_cur_bus_speed = { +static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = { .attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO}, .show = cur_bus_speed_read_file, }; -static ssize_t test_write_file (struct hotplug_slot *slot, const char *buf, +static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf, size_t count) { + struct hotplug_slot *slot = pci_slot->hotplug; unsigned long ltest; u32 test; int retval = 0; @@ -394,13 +341,14 @@ exit: return count; } -static struct hotplug_slot_attribute hotplug_slot_attr_test = { +static struct pci_slot_attribute hotplug_slot_attr_test = { .attr = {.name = "test", .mode = S_IFREG | S_IRUGO | S_IWUSR}, .store = test_write_file }; -static int has_power_file (struct hotplug_slot *slot) +static int has_power_file(struct pci_slot *pci_slot) { + struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) return -ENODEV; if ((slot->ops->enable_slot) || @@ -410,8 +358,9 @@ static int has_power_file (struct hotplug_slot *slot) return -ENOENT; } -static int has_attention_file (struct hotplug_slot *slot) +static int has_attention_file(struct pci_slot *pci_slot) { + struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) return -ENODEV; if ((slot->ops->set_attention_status) || @@ -420,8 +369,9 @@ static int has_attention_file (struct hotplug_slot *slot) return -ENOENT; } -static int has_latch_file (struct hotplug_slot *slot) +static int has_latch_file(struct pci_slot *pci_slot) { + struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) return -ENODEV; if (slot->ops->get_latch_status) @@ -429,8 +379,9 @@ static int has_latch_file (struct hotplug_slot *slot) return -ENOENT; } -static int has_adapter_file (struct hotplug_slot *slot) +static int has_adapter_file(struct pci_slot *pci_slot) { + struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) return -ENODEV; if (slot->ops->get_adapter_status) @@ -438,17 +389,9 @@ static int has_adapter_file (struct hotplug_slot *slot) return -ENOENT; } -static int has_address_file (struct hotplug_slot *slot) -{ - if ((!slot) || (!slot->ops)) - return -ENODEV; - if (slot->ops->get_address) - return 0; - return -ENOENT; -} - -static int has_max_bus_speed_file (struct hotplug_slot *slot) +static int has_max_bus_speed_file(struct pci_slot *pci_slot) { + struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) return -ENODEV; if (slot->ops->get_max_bus_speed) @@ -456,8 +399,9 @@ static int has_max_bus_speed_file (struct hotplug_slot *slot) return -ENOENT; } -static int has_cur_bus_speed_file (struct hotplug_slot *slot) +static int has_cur_bus_speed_file(struct pci_slot *pci_slot) { + struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) return -ENODEV; if (slot->ops->get_cur_bus_speed) @@ -465,8 +409,9 @@ static int has_cur_bus_speed_file (struct hotplug_slot *slot) return -ENOENT; } -static int has_test_file (struct hotplug_slot *slot) +static int has_test_file(struct pci_slot *pci_slot) { + struct hotplug_slot *slot = pci_slot->hotplug; if ((!slot) || (!slot->ops)) return -ENODEV; if (slot->ops->hardware_test) @@ -474,7 +419,7 @@ static int has_test_file (struct hotplug_slot *slot) return -ENOENT; } -static int fs_add_slot (struct hotplug_slot *slot) +static int fs_add_slot(struct pci_slot *slot) { int retval = 0; @@ -505,13 +450,6 @@ static int fs_add_slot (struct hotplug_slot *slot) goto exit_adapter; } - if (has_address_file(slot) == 0) { - retval = sysfs_create_file(&slot->kobj, - &hotplug_slot_attr_address.attr); - if (retval) - goto exit_address; - } - if (has_max_bus_speed_file(slot) == 0) { retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr); @@ -544,10 +482,6 @@ exit_cur_speed: sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr); exit_max_speed: - if (has_address_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_address.attr); - -exit_address: if (has_adapter_file(slot) == 0) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); @@ -567,7 +501,7 @@ exit: return retval; } -static void fs_remove_slot (struct hotplug_slot *slot) +static void fs_remove_slot(struct pci_slot *slot) { if (has_power_file(slot) == 0) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr); @@ -581,9 +515,6 @@ static void fs_remove_slot (struct hotplug_slot *slot) if (has_adapter_file(slot) == 0) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); - if (has_address_file(slot) == 0) - sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_address.attr); - if (has_max_bus_speed_file(slot) == 0) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr); @@ -599,12 +530,16 @@ static struct hotplug_slot *get_slot_from_name (const char *name) struct hotplug_slot *slot; struct list_head *tmp; + spin_lock(&pci_hotplug_slot_list_lock); list_for_each (tmp, &pci_hotplug_slot_list) { slot = list_entry (tmp, struct hotplug_slot, slot_list); if (strcmp(slot->name, name) == 0) - return slot; + goto out; } - return NULL; + slot = NULL; +out: + spin_unlock(&pci_hotplug_slot_list_lock); + return slot; } /** @@ -616,9 +551,10 @@ static struct hotplug_slot *get_slot_from_name (const char *name) * * Returns 0 if successful, anything else for an error. */ -int pci_hp_register (struct hotplug_slot *slot) +int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) { int result; + struct pci_slot *pci_slot; struct hotplug_slot *tmp; if (slot == NULL) @@ -636,19 +572,28 @@ int pci_hp_register (struct hotplug_slot *slot) if (tmp) return -EEXIST; - slot->kobj.kset = pci_hotplug_slots_kset; - result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL, - "%s", slot->name); - if (result) { - err("Unable to register kobject '%s'", slot->name); - return -EINVAL; + pci_slot = pci_create_slot(bus, slot_nr, slot->name); + if (IS_ERR(pci_slot)) + return PTR_ERR(pci_slot); + + if (pci_slot->hotplug) { + dbg("%s: already claimed\n", __func__); + pci_destroy_slot(pci_slot); + return -EBUSY; } - list_add (&slot->slot_list, &pci_hotplug_slot_list); + slot->pci_slot = pci_slot; + pci_slot->hotplug = slot; + + spin_lock(&pci_hotplug_slot_list_lock); + list_add(&slot->slot_list, &pci_hotplug_slot_list); + spin_unlock(&pci_hotplug_slot_list_lock); + + result = fs_add_slot(pci_slot); + kobject_uevent(&pci_slot->kobj, KOBJ_ADD); + dbg("Added slot %s to the list\n", slot->name); + - result = fs_add_slot (slot); - kobject_uevent(&slot->kobj, KOBJ_ADD); - dbg ("Added slot %s to the list\n", slot->name); return result; } @@ -661,22 +606,30 @@ int pci_hp_register (struct hotplug_slot *slot) * * Returns 0 if successful, anything else for an error. */ -int pci_hp_deregister (struct hotplug_slot *slot) +int pci_hp_deregister(struct hotplug_slot *hotplug) { struct hotplug_slot *temp; + struct pci_slot *slot; - if (slot == NULL) + if (!hotplug) return -ENODEV; - temp = get_slot_from_name (slot->name); - if (temp != slot) { + temp = get_slot_from_name(hotplug->name); + if (temp != hotplug) return -ENODEV; - } - list_del (&slot->slot_list); - fs_remove_slot (slot); - dbg ("Removed slot %s from the list\n", slot->name); - kobject_put(&slot->kobj); + spin_lock(&pci_hotplug_slot_list_lock); + list_del(&hotplug->slot_list); + spin_unlock(&pci_hotplug_slot_list_lock); + + slot = hotplug->pci_slot; + fs_remove_slot(slot); + dbg("Removed slot %s from the list\n", hotplug->name); + + hotplug->release(hotplug); + slot->hotplug = NULL; + pci_destroy_slot(slot); + return 0; } @@ -690,13 +643,15 @@ int pci_hp_deregister (struct hotplug_slot *slot) * * Returns 0 if successful, anything else for an error. */ -int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot, +int __must_check pci_hp_change_slot_info(struct hotplug_slot *hotplug, struct hotplug_slot_info *info) { - if ((slot == NULL) || (info == NULL)) + struct pci_slot *slot; + if (!hotplug || !info) return -ENODEV; + slot = hotplug->pci_slot; - memcpy (slot->info, info, sizeof (struct hotplug_slot_info)); + memcpy(hotplug->info, info, sizeof(struct hotplug_slot_info)); return 0; } @@ -704,36 +659,22 @@ int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot, static int __init pci_hotplug_init (void) { int result; - struct kset *pci_bus_kset; - pci_bus_kset = bus_get_kset(&pci_bus_type); - - pci_hotplug_slots_kset = kset_create_and_add("slots", NULL, - &pci_bus_kset->kobj); - if (!pci_hotplug_slots_kset) { - result = -ENOMEM; - err("Register subsys error\n"); - goto exit; - } result = cpci_hotplug_init(debug); if (result) { err ("cpci_hotplug_init with error %d\n", result); - goto err_subsys; + goto err_cpci; } info (DRIVER_DESC " version: " DRIVER_VERSION "\n"); - goto exit; -err_subsys: - kset_unregister(pci_hotplug_slots_kset); -exit: +err_cpci: return result; } static void __exit pci_hotplug_exit (void) { cpci_hotplug_exit(); - kset_unregister(pci_hotplug_slots_kset); } module_init(pci_hotplug_init); @@ -745,7 +686,6 @@ MODULE_LICENSE("GPL"); module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); -EXPORT_SYMBOL_GPL(pci_hotplug_slots_kset); EXPORT_SYMBOL_GPL(pci_hp_register); EXPORT_SYMBOL_GPL(pci_hp_deregister); EXPORT_SYMBOL_GPL(pci_hp_change_slot_info); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 49414e9..7b21c86 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -72,7 +72,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value); static int get_attention_status (struct hotplug_slot *slot, u8 *value); static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); -static int get_address (struct hotplug_slot *slot, u32 *value); static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); @@ -85,7 +84,6 @@ static struct hotplug_slot_ops pciehp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_address = get_address, .get_max_bus_speed = get_max_bus_speed, .get_cur_bus_speed = get_cur_bus_speed, }; @@ -252,7 +250,9 @@ static int init_slots(struct controller *ctrl) dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); - retval = pci_hp_register(hotplug_slot); + retval = pci_hp_register(hotplug_slot, + ctrl->pci_dev->subordinate, + slot->device); if (retval) { err("pci_hp_register failed with error %d\n", retval); if (retval == -EEXIST) @@ -263,7 +263,7 @@ static int init_slots(struct controller *ctrl) } /* create additional sysfs entries */ if (EMI(ctrl)) { - retval = sysfs_create_file(&hotplug_slot->kobj, + retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj, &hotplug_slot_attr_lock.attr); if (retval) { pci_hp_deregister(hotplug_slot); @@ -296,7 +296,7 @@ static void cleanup_slots(struct controller *ctrl) slot = list_entry(tmp, struct slot, slot_list); list_del(&slot->slot_list); if (EMI(ctrl)) - sysfs_remove_file(&slot->hotplug_slot->kobj, + sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj, &hotplug_slot_attr_lock.attr); cancel_delayed_work(&slot->work); flush_scheduled_work(); @@ -398,19 +398,8 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) return 0; } -static int get_address(struct hotplug_slot *hotplug_slot, u32 *value) -{ - struct slot *slot = hotplug_slot->private; - struct pci_bus *bus = slot->ctrl->pci_dev->subordinate; - - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); - - *value = (pci_domain_nr(bus) << 16) | (slot->bus << 8) | slot->device; - - return 0; -} - -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) +static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, + enum pci_bus_speed *value) { struct slot *slot = hotplug_slot->private; int retval; @@ -474,7 +463,12 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ /* Setup the slot information structures */ rc = init_slots(ctrl); if (rc) { - err("%s: slot initialization failed\n", PCIE_MODULE_NAME); + if (rc == -EBUSY) + warn("%s: slot already registered by another " + "hotplug driver\n", PCIE_MODULE_NAME); + else + err("%s: slot initialization failed\n", + PCIE_MODULE_NAME); goto err_out_release_ctlr; } diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index 779c5db..a796301 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -14,8 +14,10 @@ */ #include #include +#include #include #include "rpadlpar.h" +#include "../pci.h" #define DLPAR_KOBJ_NAME "control" @@ -27,7 +29,6 @@ #define MAX_DRC_NAME_LEN 64 - static ssize_t add_slot_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t nbytes) { @@ -112,7 +113,7 @@ int dlpar_sysfs_init(void) int error; dlpar_kobj = kobject_create_and_add(DLPAR_KOBJ_NAME, - &pci_hotplug_slots_kset->kobj); + &pci_slots_kset->kobj); if (!dlpar_kobj) return -EINVAL; diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c index 56197b6..9b714ea 100644 --- a/drivers/pci/hotplug/rpaphp_slot.c +++ b/drivers/pci/hotplug/rpaphp_slot.c @@ -33,33 +33,6 @@ #include #include "rpaphp.h" -static ssize_t address_read_file (struct hotplug_slot *php_slot, char *buf) -{ - int retval; - struct slot *slot = (struct slot *)php_slot->private; - struct pci_bus *bus; - - if (!slot) - return -ENOENT; - - bus = slot->bus; - if (!bus) - return -ENOENT; - - if (bus->self) - retval = sprintf(buf, pci_name(bus->self)); - else - retval = sprintf(buf, "%04x:%02x:00.0", - pci_domain_nr(bus), bus->number); - - return retval; -} - -static struct hotplug_slot_attribute php_attr_address = { - .attr = {.name = "address", .mode = S_IFREG | S_IRUGO}, - .show = address_read_file, -}; - /* free up the memory used by a slot */ static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot) { @@ -135,9 +108,6 @@ int rpaphp_deregister_slot(struct slot *slot) list_del(&slot->rpaphp_slot_list); - /* remove "address" file */ - sysfs_remove_file(&php_slot->kobj, &php_attr_address.attr); - retval = pci_hp_deregister(php_slot); if (retval) err("Problem unregistering a slot %s\n", slot->name); @@ -151,6 +121,7 @@ int rpaphp_register_slot(struct slot *slot) { struct hotplug_slot *php_slot = slot->hotplug_slot; int retval; + int slotno; dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n", __func__, slot->dn->full_name, slot->index, slot->name, @@ -162,19 +133,16 @@ int rpaphp_register_slot(struct slot *slot) return -EAGAIN; } - retval = pci_hp_register(php_slot); + if (slot->dn->child) + slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn); + else + slotno = -1; + retval = pci_hp_register(php_slot, slot->bus, slotno); if (retval) { err("pci_hp_register failed with error %d\n", retval); return retval; } - /* create "address" file */ - retval = sysfs_create_file(&php_slot->kobj, &php_attr_address.attr); - if (retval) { - err("sysfs_create_file failed with error %d\n", retval); - goto sysfs_fail; - } - /* add slot to our internal list */ list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head); info("Slot [%s] registered\n", slot->name); diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index 2fe37cd..2036a43 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -197,13 +197,15 @@ static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot, static struct hotplug_slot * sn_hp_destroy(void) { struct slot *slot; + struct pci_slot *pci_slot; struct hotplug_slot *bss_hotplug_slot = NULL; list_for_each_entry(slot, &sn_hp_list, hp_list) { bss_hotplug_slot = slot->hotplug_slot; + pci_slot = bss_hotplug_slot->pci_slot; list_del(&((struct slot *)bss_hotplug_slot->private)-> hp_list); - sysfs_remove_file(&bss_hotplug_slot->kobj, + sysfs_remove_file(&pci_slot->kobj, &sn_slot_path_attr.attr); break; } @@ -614,6 +616,7 @@ static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot) static int sn_hotplug_slot_register(struct pci_bus *pci_bus) { int device; + struct pci_slot *pci_slot; struct hotplug_slot *bss_hotplug_slot; int rc = 0; @@ -650,11 +653,12 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus) bss_hotplug_slot->ops = &sn_hotplug_slot_ops; bss_hotplug_slot->release = &sn_release_slot; - rc = pci_hp_register(bss_hotplug_slot); + rc = pci_hp_register(bss_hotplug_slot, pci_bus, device); if (rc) goto register_err; - rc = sysfs_create_file(&bss_hotplug_slot->kobj, + pci_slot = bss_hotplug_slot->pci_slot; + rc = sysfs_create_file(&pci_slot->kobj, &sn_slot_path_attr.attr); if (rc) goto register_err; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index df41ecc..a8cbd03 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -68,7 +68,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value); static int get_attention_status (struct hotplug_slot *slot, u8 *value); static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); -static int get_address (struct hotplug_slot *slot, u32 *value); static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); @@ -81,7 +80,6 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_address = get_address, .get_max_bus_speed = get_max_bus_speed, .get_cur_bus_speed = get_cur_bus_speed, }; @@ -159,7 +157,8 @@ static int init_slots(struct controller *ctrl) dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); - retval = pci_hp_register(slot->hotplug_slot); + retval = pci_hp_register(slot->hotplug_slot, + ctrl->pci_dev->subordinate, slot->device); if (retval) { err("pci_hp_register failed with error %d\n", retval); if (retval == -EEXIST) @@ -288,19 +287,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) return 0; } -static int get_address (struct hotplug_slot *hotplug_slot, u32 *value) -{ - struct slot *slot = get_slot(hotplug_slot); - struct pci_bus *bus = slot->ctrl->pci_dev->subordinate; - - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); - - *value = (pci_domain_nr(bus) << 16) | (slot->bus << 8) | slot->device; - - return 0; -} - -static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) +static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, + enum pci_bus_speed *value) { struct slot *slot = get_slot(hotplug_slot); int retval; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 0a497c1b..e1d7bbf 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -106,3 +106,16 @@ pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev) } struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev); + +/* PCI slot sysfs helper code */ +#define to_pci_slot(s) container_of(s, struct pci_slot, kobj) + +extern struct kset *pci_slots_kset; + +struct pci_slot_attribute { + struct attribute attr; + ssize_t (*show)(struct pci_slot *, char *); + ssize_t (*store)(struct pci_slot *, const char *, size_t); +}; +#define to_pci_slot_attr(s) container_of(s, struct pci_slot_attribute, attr) + diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index aebab71..4562827 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -414,6 +414,7 @@ static struct pci_bus * pci_alloc_bus(void) INIT_LIST_HEAD(&b->node); INIT_LIST_HEAD(&b->children); INIT_LIST_HEAD(&b->devices); + INIT_LIST_HEAD(&b->slots); } return b; } diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c new file mode 100644 index 0000000..7e5b85c --- /dev/null +++ b/drivers/pci/slot.c @@ -0,0 +1,233 @@ +/* + * drivers/pci/slot.c + * Copyright (C) 2006 Matthew Wilcox + * Copyright (C) 2006-2008 Hewlett-Packard Development Company, L.P. + * Alex Chiang + */ + +#include +#include +#include +#include "pci.h" + +struct kset *pci_slots_kset; +EXPORT_SYMBOL_GPL(pci_slots_kset); + +static ssize_t pci_slot_attr_show(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + struct pci_slot *slot = to_pci_slot(kobj); + struct pci_slot_attribute *attribute = to_pci_slot_attr(attr); + return attribute->show ? attribute->show(slot, buf) : -EIO; +} + +static ssize_t pci_slot_attr_store(struct kobject *kobj, + struct attribute *attr, const char *buf, size_t len) +{ + struct pci_slot *slot = to_pci_slot(kobj); + struct pci_slot_attribute *attribute = to_pci_slot_attr(attr); + return attribute->store ? attribute->store(slot, buf, len) : -EIO; +} + +static struct sysfs_ops pci_slot_sysfs_ops = { + .show = pci_slot_attr_show, + .store = pci_slot_attr_store, +}; + +static ssize_t address_read_file(struct pci_slot *slot, char *buf) +{ + if (slot->number == 0xff) + return sprintf(buf, "%04x:%02x\n", + pci_domain_nr(slot->bus), + slot->bus->number); + else + return sprintf(buf, "%04x:%02x:%02x\n", + pci_domain_nr(slot->bus), + slot->bus->number, + slot->number); +} + +static void pci_slot_release(struct kobject *kobj) +{ + struct pci_slot *slot = to_pci_slot(kobj); + + pr_debug("%s: releasing pci_slot on %x:%d\n", __func__, + slot->bus->number, slot->number); + + list_del(&slot->list); + + kfree(slot); +} + +static struct pci_slot_attribute pci_slot_attr_address = + __ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL); + +static struct attribute *pci_slot_default_attrs[] = { + &pci_slot_attr_address.attr, + NULL, +}; + +static struct kobj_type pci_slot_ktype = { + .sysfs_ops = &pci_slot_sysfs_ops, + .release = &pci_slot_release, + .default_attrs = pci_slot_default_attrs, +}; + +/** + * pci_create_slot - create or increment refcount for physical PCI slot + * @parent: struct pci_bus of parent bridge + * @slot_nr: PCI_SLOT(pci_dev->devfn) or -1 for placeholder + * @name: user visible string presented in /sys/bus/pci/slots/ + * + * PCI slots have first class attributes such as address, speed, width, + * and a &struct pci_slot is used to manage them. This interface will + * either return a new &struct pci_slot to the caller, or if the pci_slot + * already exists, its refcount will be incremented. + * + * Slots are uniquely identified by a @pci_bus, @slot_nr, @name tuple. + * + * Placeholder slots: + * In most cases, @pci_bus, @slot_nr will be sufficient to uniquely identify + * a slot. There is one notable exception - pSeries (rpaphp), where the + * @slot_nr cannot be determined until a device is actually inserted into + * the slot. In this scenario, the caller may pass -1 for @slot_nr. + * + * The following semantics are imposed when the caller passes @slot_nr == + * -1. First, the check for existing %struct pci_slot is skipped, as the + * caller may know about several unpopulated slots on a given %struct + * pci_bus, and each slot would have a @slot_nr of -1. Uniqueness for + * these slots is then determined by the @name parameter. We expect + * kobject_init_and_add() to warn us if the caller attempts to create + * multiple slots with the same name. The other change in semantics is + * user-visible, which is the 'address' parameter presented in sysfs will + * consist solely of a dddd:bb tuple, where dddd is the PCI domain of the + * %struct pci_bus and bb is the bus number. In other words, the devfn of + * the 'placeholder' slot will not be displayed. + */ + +struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, + const char *name) +{ + struct pci_slot *slot; + int err; + + down_write(&pci_bus_sem); + + if (slot_nr == -1) + goto placeholder; + + /* If we've already created this slot, bump refcount and return. */ + list_for_each_entry(slot, &parent->slots, list) { + if (slot->number == slot_nr) { + kobject_get(&slot->kobj); + pr_debug("%s: inc refcount to %d on %04x:%02x:%02x\n", + __func__, + atomic_read(&slot->kobj.kref.refcount), + pci_domain_nr(parent), parent->number, + slot_nr); + goto out; + } + } + +placeholder: + slot = kzalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) { + slot = ERR_PTR(-ENOMEM); + goto out; + } + + slot->bus = parent; + slot->number = slot_nr; + + slot->kobj.kset = pci_slots_kset; + err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL, + "%s", name); + if (err) { + printk(KERN_ERR "Unable to register kobject %s\n", name); + goto err; + } + + INIT_LIST_HEAD(&slot->list); + list_add(&slot->list, &parent->slots); + + /* Don't care if debug printk has a -1 for slot_nr */ + pr_debug("%s: created pci_slot on %04x:%02x:%02x\n", + __func__, pci_domain_nr(parent), parent->number, slot_nr); + + out: + up_write(&pci_bus_sem); + return slot; + err: + kfree(slot); + slot = ERR_PTR(err); + goto out; +} +EXPORT_SYMBOL_GPL(pci_create_slot); + +/** + * pci_update_slot_number - update %struct pci_slot -> number + * @slot - %struct pci_slot to update + * @slot_nr - new number for slot + * + * The primary purpose of this interface is to allow callers who earlier + * created a placeholder slot in pci_create_slot() by passing a -1 as + * slot_nr, to update their %struct pci_slot with the correct @slot_nr. + */ + +void pci_update_slot_number(struct pci_slot *slot, int slot_nr) +{ + int name_count = 0; + struct pci_slot *tmp; + + down_write(&pci_bus_sem); + + list_for_each_entry(tmp, &slot->bus->slots, list) { + WARN_ON(tmp->number == slot_nr); + if (!strcmp(kobject_name(&tmp->kobj), kobject_name(&slot->kobj))) + name_count++; + } + + if (name_count > 1) + printk(KERN_WARNING "pci_update_slot_number found %d slots with the same name: %s\n", name_count, kobject_name(&slot->kobj)); + + slot->number = slot_nr; + up_write(&pci_bus_sem); +} +EXPORT_SYMBOL_GPL(pci_update_slot_number); + +/** + * pci_destroy_slot - decrement refcount for physical PCI slot + * @slot: struct pci_slot to decrement + * + * %struct pci_slot is refcounted, so destroying them is really easy; we + * just call kobject_put on its kobj and let our release methods do the + * rest. + */ + +void pci_destroy_slot(struct pci_slot *slot) +{ + pr_debug("%s: dec refcount to %d on %04x:%02x:%02x\n", __func__, + atomic_read(&slot->kobj.kref.refcount) - 1, + pci_domain_nr(slot->bus), slot->bus->number, slot->number); + + down_write(&pci_bus_sem); + kobject_put(&slot->kobj); + up_write(&pci_bus_sem); +} +EXPORT_SYMBOL_GPL(pci_destroy_slot); + +static int pci_slot_init(void) +{ + struct kset *pci_bus_kset; + + pci_bus_kset = bus_get_kset(&pci_bus_type); + pci_slots_kset = kset_create_and_add("slots", NULL, + &pci_bus_kset->kobj); + if (!pci_slots_kset) { + printk(KERN_ERR "PCI: Slot initialization failure\n"); + return -ENOMEM; + } + return 0; +} + +subsys_initcall(pci_slot_init); diff --git a/include/linux/pci.h b/include/linux/pci.h index 507ee52..f1f73f7 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -17,8 +17,7 @@ #ifndef LINUX_PCI_H #define LINUX_PCI_H -/* Include the pci register defines */ -#include +#include /* The pci register defines */ /* * The PCI interface treats multi-function devices as independent @@ -49,12 +48,22 @@ #include #include #include +#include #include #include /* Include the ID list */ #include +/* pci_slot represents a physical slot */ +struct pci_slot { + struct pci_bus *bus; /* The bus this slot is on */ + struct list_head list; /* node in list of slots on this bus */ + struct hotplug_slot *hotplug; /* Hotplug info (migrate over time) */ + unsigned char number; /* PCI_SLOT(pci_dev->devfn) */ + struct kobject kobj; +}; + /* File state for mmap()s on /proc/bus/pci/X/Y */ enum pci_mmap_state { pci_mmap_io, @@ -142,6 +151,7 @@ struct pci_dev { void *sysdata; /* hook for sys-specific extension */ struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */ + struct pci_slot *slot; /* Physical slot this device is in */ unsigned int devfn; /* encoded device & function index */ unsigned short vendor; @@ -266,6 +276,7 @@ struct pci_bus { struct list_head children; /* list of child buses */ struct list_head devices; /* list of devices on this bus */ struct pci_dev *self; /* bridge device as seen by parent */ + struct list_head slots; /* list of slots on this bus */ struct resource *resource[PCI_BUS_NUM_RESOURCES]; /* address space routed to this bus */ @@ -488,6 +499,10 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr); +struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, + const char *name); +void pci_destroy_slot(struct pci_slot *slot); +void pci_update_slot_number(struct pci_slot *slot, int slot_nr); int pci_scan_slot(struct pci_bus *bus, int devfn); struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn); void pci_device_add(struct pci_dev *dev, struct pci_bus *bus); diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index dbdcd1a..a08cd06 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -95,9 +95,6 @@ struct hotplug_slot_attribute { * @get_adapter_status: Called to get see if an adapter is present in the slot or not. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. - * @get_address: Called to get pci address of a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. * @get_max_bus_speed: Called to get the max bus speed for a slot. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. @@ -120,7 +117,6 @@ struct hotplug_slot_ops { int (*get_attention_status) (struct hotplug_slot *slot, u8 *value); int (*get_latch_status) (struct hotplug_slot *slot, u8 *value); int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value); - int (*get_address) (struct hotplug_slot *slot, u32 *value); int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); }; @@ -140,7 +136,6 @@ struct hotplug_slot_info { u8 attention_status; u8 latch_status; u8 adapter_status; - u32 address; enum pci_bus_speed max_bus_speed; enum pci_bus_speed cur_bus_speed; }; @@ -166,15 +161,14 @@ struct hotplug_slot { /* Variables below this are for use only by the hotplug pci core. */ struct list_head slot_list; - struct kobject kobj; + struct pci_slot *pci_slot; }; #define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj) -extern int pci_hp_register (struct hotplug_slot *slot); -extern int pci_hp_deregister (struct hotplug_slot *slot); +extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr); +extern int pci_hp_deregister(struct hotplug_slot *slot); extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot, struct hotplug_slot_info *info); -extern struct kset *pci_hotplug_slots_kset; /* PCI Setting Record (Type 0) */ struct hpp_type0 { -- cgit v0.10.2 From 8344b568f5bdc7ee1bba909de3294c6348c36056 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 10 Jun 2008 15:30:42 -0600 Subject: PCI: ACPI PCI slot detection driver Detect all physical PCI slots as described by ACPI, and create entries in /sys/bus/pci/slots/. Not all physical slots are hotpluggable, and the acpiphp module does not detect them. Now we know the physical PCI geography of our system, without caring about hotplug. [kaneshige.kenji@jp.fujitsu.com: export-kobject_rename-for-pci_hotplug_core] Signed-off-by: Kenji Kaneshige Acked-by: Greg KH [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix build with CONFIG_DMI=n] Signed-off-by: Alex Chiang Cc: Greg KH Cc: Kristen Carlson Accardi Cc: Len Brown Acked-by: Len Brown Acked-by: Kenji Kaneshige Signed-off-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index c52fca8..250d41a 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -338,6 +338,15 @@ config ACPI_EC the battery and thermal drivers. If you are compiling for a mobile system, say Y. +config ACPI_PCI_SLOT + tristate "PCI slot detection driver" + default n + help + This driver will attempt to discover all PCI slots in your system, + and creates entries in /sys/bus/pci/slots/. This feature can + help you correlate PCI bus addresses with the physical geography + of your slots. If you are unsure, say N. + config ACPI_POWER bool default y diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 40b0fca..579c29c 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_ACPI_DOCK) += dock.o obj-$(CONFIG_ACPI_BAY) += bay.o obj-$(CONFIG_ACPI_VIDEO) += video.o obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o +obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_POWER) += power.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c new file mode 100644 index 0000000..b9ab030 --- /dev/null +++ b/drivers/acpi/pci_slot.c @@ -0,0 +1,368 @@ +/* + * pci_slot.c - ACPI PCI Slot Driver + * + * The code here is heavily leveraged from the acpiphp module. + * Thanks to Matthew Wilcox for much guidance. + * Thanks to Kenji Kaneshige for code + * review and fixes. + * + * Copyright (C) 2007 Alex Chiang + * Copyright (C) 2007 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +static int check_sta_before_sun; + +#define DRIVER_VERSION "0.1" +#define DRIVER_AUTHOR "Alex Chiang " +#define DRIVER_DESC "ACPI PCI Slot Detection Driver" +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); +module_param(debug, bool, 0644); + +#define _COMPONENT ACPI_PCI_COMPONENT +ACPI_MODULE_NAME("pci_slot"); + +#define MY_NAME "pci_slot" +#define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg) +#define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg) +#define dbg(format, arg...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "%s: " format, \ + MY_NAME , ## arg); \ + } while (0) + +#define SLOT_NAME_SIZE 20 /* Inspired by #define in acpiphp.h */ + +struct acpi_pci_slot { + acpi_handle root_handle; /* handle of the root bridge */ + struct pci_slot *pci_slot; /* corresponding pci_slot */ + struct list_head list; /* node in the list of slots */ +}; + +static int acpi_pci_slot_add(acpi_handle handle); +static void acpi_pci_slot_remove(acpi_handle handle); + +static LIST_HEAD(slot_list); +static DEFINE_MUTEX(slot_list_lock); +static struct acpi_pci_driver acpi_pci_slot_driver = { + .add = acpi_pci_slot_add, + .remove = acpi_pci_slot_remove, +}; + +static int +check_slot(acpi_handle handle, int *device, unsigned long *sun) +{ + int retval = 0; + unsigned long adr, sta; + acpi_status status; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + + acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); + dbg("Checking slot on path: %s\n", (char *)buffer.pointer); + + if (check_sta_before_sun) { + /* If SxFy doesn't have _STA, we just assume it's there */ + status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); + if (ACPI_SUCCESS(status) && !(sta & ACPI_STA_DEVICE_PRESENT)) { + retval = -1; + goto out; + } + } + + status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr); + if (ACPI_FAILURE(status)) { + dbg("_ADR returned %d on %s\n", status, (char *)buffer.pointer); + retval = -1; + goto out; + } + + *device = (adr >> 16) & 0xffff; + + /* No _SUN == not a slot == bail */ + status = acpi_evaluate_integer(handle, "_SUN", NULL, sun); + if (ACPI_FAILURE(status)) { + dbg("_SUN returned %d on %s\n", status, (char *)buffer.pointer); + retval = -1; + goto out; + } + +out: + kfree(buffer.pointer); + return retval; +} + +struct callback_args { + acpi_walk_callback user_function; /* only for walk_p2p_bridge */ + struct pci_bus *pci_bus; + acpi_handle root_handle; +}; + +/* + * register_slot + * + * Called once for each SxFy object in the namespace. Don't worry about + * calling pci_create_slot multiple times for the same pci_bus:device, + * since each subsequent call simply bumps the refcount on the pci_slot. + * + * The number of calls to pci_destroy_slot from unregister_slot is + * symmetrical. + */ +static acpi_status +register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + int device; + unsigned long sun; + char name[SLOT_NAME_SIZE]; + struct acpi_pci_slot *slot; + struct pci_slot *pci_slot; + struct callback_args *parent_context = context; + struct pci_bus *pci_bus = parent_context->pci_bus; + + if (check_slot(handle, &device, &sun)) + return AE_OK; + + slot = kmalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) { + err("%s: cannot allocate memory\n", __func__); + return AE_OK; + } + + snprintf(name, sizeof(name), "%u", (u32)sun); + pci_slot = pci_create_slot(pci_bus, device, name); + if (IS_ERR(pci_slot)) { + err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot)); + kfree(slot); + } + + slot->root_handle = parent_context->root_handle; + slot->pci_slot = pci_slot; + INIT_LIST_HEAD(&slot->list); + mutex_lock(&slot_list_lock); + list_add(&slot->list, &slot_list); + mutex_unlock(&slot_list_lock); + + dbg("pci_slot: %p, pci_bus: %x, device: %d, name: %s\n", + pci_slot, pci_bus->number, device, name); + + return AE_OK; +} + +/* + * walk_p2p_bridge - discover and walk p2p bridges + * @handle: points to an acpi_pci_root + * @context: p2p_bridge_context pointer + * + * Note that when we call ourselves recursively, we pass a different + * value of pci_bus in the child_context. + */ +static acpi_status +walk_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + int device, function; + unsigned long adr; + acpi_status status; + acpi_handle dummy_handle; + acpi_walk_callback user_function; + + struct pci_dev *dev; + struct pci_bus *pci_bus; + struct callback_args child_context; + struct callback_args *parent_context = context; + + pci_bus = parent_context->pci_bus; + user_function = parent_context->user_function; + + status = acpi_get_handle(handle, "_ADR", &dummy_handle); + if (ACPI_FAILURE(status)) + return AE_OK; + + status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr); + if (ACPI_FAILURE(status)) + return AE_OK; + + device = (adr >> 16) & 0xffff; + function = adr & 0xffff; + + dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function)); + if (!dev || !dev->subordinate) + goto out; + + child_context.pci_bus = dev->subordinate; + child_context.user_function = user_function; + child_context.root_handle = parent_context->root_handle; + + dbg("p2p bridge walk, pci_bus = %x\n", dev->subordinate->number); + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, + user_function, &child_context, NULL); + if (ACPI_FAILURE(status)) + goto out; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, + walk_p2p_bridge, &child_context, NULL); +out: + pci_dev_put(dev); + return AE_OK; +} + +/* + * walk_root_bridge - generic root bridge walker + * @handle: points to an acpi_pci_root + * @user_function: user callback for slot objects + * + * Call user_function for all objects underneath this root bridge. + * Walk p2p bridges underneath us and call user_function on those too. + */ +static int +walk_root_bridge(acpi_handle handle, acpi_walk_callback user_function) +{ + int seg, bus; + unsigned long tmp; + acpi_status status; + acpi_handle dummy_handle; + struct pci_bus *pci_bus; + struct callback_args context; + + /* If the bridge doesn't have _STA, we assume it is always there */ + status = acpi_get_handle(handle, "_STA", &dummy_handle); + if (ACPI_SUCCESS(status)) { + status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp); + if (ACPI_FAILURE(status)) { + info("%s: _STA evaluation failure\n", __func__); + return 0; + } + if ((tmp & ACPI_STA_DEVICE_FUNCTIONING) == 0) + /* don't register this object */ + return 0; + } + + status = acpi_evaluate_integer(handle, "_SEG", NULL, &tmp); + seg = ACPI_SUCCESS(status) ? tmp : 0; + + status = acpi_evaluate_integer(handle, "_BBN", NULL, &tmp); + bus = ACPI_SUCCESS(status) ? tmp : 0; + + pci_bus = pci_find_bus(seg, bus); + if (!pci_bus) + return 0; + + context.pci_bus = pci_bus; + context.user_function = user_function; + context.root_handle = handle; + + dbg("root bridge walk, pci_bus = %x\n", pci_bus->number); + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, + user_function, &context, NULL); + if (ACPI_FAILURE(status)) + return status; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, + walk_p2p_bridge, &context, NULL); + if (ACPI_FAILURE(status)) + err("%s: walk_p2p_bridge failure - %d\n", __func__, status); + + return status; +} + +/* + * acpi_pci_slot_add + * @handle: points to an acpi_pci_root + */ +static int +acpi_pci_slot_add(acpi_handle handle) +{ + acpi_status status; + + status = walk_root_bridge(handle, register_slot); + if (ACPI_FAILURE(status)) + err("%s: register_slot failure - %d\n", __func__, status); + + return status; +} + +/* + * acpi_pci_slot_remove + * @handle: points to an acpi_pci_root + */ +static void +acpi_pci_slot_remove(acpi_handle handle) +{ + struct acpi_pci_slot *slot, *tmp; + + mutex_lock(&slot_list_lock); + list_for_each_entry_safe(slot, tmp, &slot_list, list) { + if (slot->root_handle == handle) { + list_del(&slot->list); + pci_destroy_slot(slot->pci_slot); + kfree(slot); + } + } + mutex_unlock(&slot_list_lock); +} + +static int do_sta_before_sun(const struct dmi_system_id *d) +{ + info("%s detected: will evaluate _STA before calling _SUN\n", d->ident); + check_sta_before_sun = 1; + return 0; +} + +static struct dmi_system_id acpi_pci_slot_dmi_table[] __initdata = { + /* + * Fujitsu Primequest machines will return 1023 to indicate an + * error if the _SUN method is evaluated on SxFy objects that + * are not present (as indicated by _STA), so for those machines, + * we want to check _STA before evaluating _SUN. + */ + { + .callback = do_sta_before_sun, + .ident = "Fujitsu PRIMEQUEST", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "FUJITSU LIMITED"), + DMI_MATCH(DMI_BIOS_VERSION, "PRIMEQUEST"), + }, + }, + {} +}; + +static int __init +acpi_pci_slot_init(void) +{ + dmi_check_system(acpi_pci_slot_dmi_table); + acpi_pci_register_driver(&acpi_pci_slot_driver); + return 0; +} + +static void __exit +acpi_pci_slot_exit(void) +{ + acpi_pci_unregister_driver(&acpi_pci_slot_driver); +} + +module_init(acpi_pci_slot_init); +module_exit(acpi_pci_slot_exit); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 4df31f3..b3b2d8c 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -572,6 +572,11 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) if (tmp) return -EEXIST; + /* + * No problems if we call this interface from both ACPI_PCI_SLOT + * driver and call it here again. If we've already created the + * pci_slot, the interface will simply bump the refcount. + */ pci_slot = pci_create_slot(bus, slot_nr, slot->name); if (IS_ERR(pci_slot)) return PTR_ERR(pci_slot); @@ -585,6 +590,17 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) slot->pci_slot = pci_slot; pci_slot->hotplug = slot; + /* + * Allow pcihp drivers to override the ACPI_PCI_SLOT name. + */ + if (strcmp(kobject_name(&pci_slot->kobj), slot->name)) { + result = kobject_rename(&pci_slot->kobj, slot->name); + if (result) { + pci_destroy_slot(pci_slot); + return result; + } + } + spin_lock(&pci_hotplug_slot_list_lock); list_add(&slot->slot_list, &pci_hotplug_slot_list); spin_unlock(&pci_hotplug_slot_list_lock); diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index 2036a43..410fe03 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -668,7 +668,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus) register_err: dev_dbg(&pci_bus->self->dev, "bus failed to register with err = %d\n", - rc); + rc); alloc_err: if (rc == -ENOMEM) diff --git a/lib/kobject.c b/lib/kobject.c index 718e510..dcade05 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -439,6 +439,7 @@ out: return error; } +EXPORT_SYMBOL_GPL(kobject_rename); /** * kobject_move - move object to another parent -- cgit v0.10.2 From 06166780eb53685e72b589814d535d1f9948e761 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 5 Jun 2008 01:15:40 +0200 Subject: ACPI PM: acpi_pm_device_sleep_state() cleanup Get rid of a superfluous acpi_pm_device_sleep_state() parameter. The only legitimate value of that parameter must be derived from the first parameter, which is what all the callers already do. (However, this does not address the fact that ACPI still doesn't set up those flags.) Signed-off-by: David Brownell Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index c3b0cd8..fbd40e9 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -369,8 +369,8 @@ int acpi_suspend(u32 acpi_state) /** * acpi_pm_device_sleep_state - return preferred power state of ACPI device * in the system sleep state given by %acpi_target_sleep_state - * @dev: device to examine - * @wake: if set, the device should be able to wake up the system + * @dev: device to examine; its driver model wakeup flags control + * whether it should be able to wake up the system * @d_min_p: used to store the upper limit of allowed states range * Return value: preferred power state of the device on success, -ENODEV on * failure (ie. if there's no 'struct acpi_device' for @dev) @@ -388,7 +388,7 @@ int acpi_suspend(u32 acpi_state) * via @wake. */ -int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) +int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) { acpi_handle handle = DEVICE_ACPI_HANDLE(dev); struct acpi_device *adev; @@ -427,7 +427,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) * can wake the system. _S0W may be valid, too. */ if (acpi_target_sleep_state == ACPI_STATE_S0 || - (wake && adev->wakeup.state.enabled && + (device_may_wakeup(dev) && adev->wakeup.state.enabled && adev->wakeup.sleep_state <= acpi_target_sleep_state)) { acpi_status status; diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 9d6fc8e..caabf05 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -298,8 +298,7 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev, { int acpi_state; - acpi_state = acpi_pm_device_sleep_state(&pdev->dev, - device_may_wakeup(&pdev->dev), NULL); + acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL); if (acpi_state < 0) return PCI_POWER_ERROR; diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index 5090277..c1b9ea3 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -117,9 +117,7 @@ static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state) { int power_state; - power_state = acpi_pm_device_sleep_state(&dev->dev, - device_may_wakeup(&dev->dev), - NULL); + power_state = acpi_pm_device_sleep_state(&dev->dev, NULL); if (power_state < 0) power_state = (state.event == PM_EVENT_ON) ? ACPI_STATE_D0 : ACPI_STATE_D3; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 2f1c68c..db90a74 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -376,9 +376,9 @@ acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle)) #ifdef CONFIG_PM_SLEEP -int acpi_pm_device_sleep_state(struct device *, int, int *); +int acpi_pm_device_sleep_state(struct device *, int *); #else /* !CONFIG_PM_SLEEP */ -static inline int acpi_pm_device_sleep_state(struct device *d, int w, int *p) +static inline int acpi_pm_device_sleep_state(struct device *d, int *p) { if (p) *p = ACPI_STATE_D0; -- cgit v0.10.2 From 8d2bdf49481b27096e242119e73abe9348c1019b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 5 Jun 2008 01:16:37 +0200 Subject: PCI ACPI: Drop the second argument of platform_pci_choose_state Since the second argument of acpi_pci_choose_state() and platform_pci_choose_state() is never used, remove it. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Len Brown diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index caabf05..dab9d47 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -293,8 +293,7 @@ EXPORT_SYMBOL(pci_osc_control_set); * choose highest power _SxD or any lower power */ -static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev, - pm_message_t state) +static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) { int acpi_state; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e4548ab..75c6023 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -508,7 +508,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } -pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); +pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); /** * pci_choose_state - Choose the power state of a PCI device @@ -528,7 +528,7 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) return PCI_D0; if (platform_pci_choose_state) { - ret = platform_pci_choose_state(dev, state); + ret = platform_pci_choose_state(dev); if (ret != PCI_POWER_ERROR) return ret; } diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 0a497c1b..ff30b3c 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -6,8 +6,7 @@ extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev); extern void pci_cleanup_rom(struct pci_dev *dev); /* Firmware callbacks */ -extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, - pm_message_t state); +extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state); -- cgit v0.10.2 From 0e6859d49ff194e01afc229c996e3aefca1a0539 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 5 Jun 2008 01:17:28 +0200 Subject: ACPI PM: Remove obsolete Toshiba workaround Remove the obsolete workaround for a Toshiba Satellite 4030cdt S1 problem from drivers/acpi/sleep/main.c . Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Len Brown diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index fbd40e9..0f2caea 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -62,8 +62,6 @@ static u32 acpi_suspend_states[] = { [PM_SUSPEND_MAX] = ACPI_STATE_S5 }; -static int init_8259A_after_S1; - /** * acpi_suspend_begin - Set the target system sleep state to the state * associated with given @pm_state, if supported. @@ -186,13 +184,6 @@ static void acpi_suspend_finish(void) acpi_set_firmware_waking_vector((acpi_physical_address) 0); acpi_target_sleep_state = ACPI_STATE_S0; - -#ifdef CONFIG_X86 - if (init_8259A_after_S1) { - printk("Broken toshiba laptop -> kicking interrupts\n"); - init_8259A(0); - } -#endif } /** @@ -232,26 +223,6 @@ static struct platform_suspend_ops acpi_suspend_ops = { .finish = acpi_suspend_finish, .end = acpi_suspend_end, }; - -/* - * Toshiba fails to preserve interrupts over S1, reinitialization - * of 8259 is needed after S1 resume. - */ -static int __init init_ints_after_s1(const struct dmi_system_id *d) -{ - printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident); - init_8259A_after_S1 = 1; - return 0; -} - -static struct dmi_system_id __initdata acpisleep_dmi_table[] = { - { - .callback = init_ints_after_s1, - .ident = "Toshiba Satellite 4030cdt", - .matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),}, - }, - {}, -}; #endif /* CONFIG_SUSPEND */ #ifdef CONFIG_HIBERNATION @@ -473,8 +444,6 @@ int __init acpi_sleep_init(void) u8 type_a, type_b; #ifdef CONFIG_SUSPEND int i = 0; - - dmi_check_system(acpisleep_dmi_table); #endif if (acpi_disabled) -- cgit v0.10.2 From d8f3de0d2412bb91639cfefc5b3c79dbf3812212 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 12 Jun 2008 23:24:06 +0200 Subject: Suspend-related patches for 2.6.27 ACPI PM: Add possibility to change suspend sequence There are some systems out there that don't work correctly with our current suspend/hibernation code ordering. Provide a workaround for these systems allowing them to pass 'acpi_sleep=old_ordering' in the kernel command line so that it will use the pre-ACPI 2.0 ("old") suspend code ordering. Unfortunately, this requires us to add a platform hook to the resuming of devices for recovering the platform in case one of the device drivers' .suspend() routines returns error code. Namely, ACPI 1.0 specifies that _PTS should be called before suspending devices, but _WAK still should be called before resuming them in order to undo the changes made by _PTS. However, if there is an error during suspending devices, they are automatically resumed without returning control to the PM core, so the _WAK has to be called from within device_resume() in that cases. The patch also reorders and refactors the ACPI suspend/hibernation code to avoid duplication as far as reasonably possible. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9cf7b34..18d793e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -147,10 +147,14 @@ and is between 256 and 4096 characters. It is defined in the file default: 0 acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode, s3_beep } + Format: { s3_bios, s3_mode, s3_beep, old_ordering } See Documentation/power/video.txt for s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep as soon as the kernel's real-mode entry point is called. + old_ordering causes the ACPI 1.0 ordering of the _PTS + control method, wrt putting devices into low power + states, to be enforced (the ACPI 2.0 ordering of _PTS is + used by default). acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode Format: { level | edge | high | low } diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index afc25ee..882e970 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -124,6 +124,8 @@ static int __init acpi_sleep_setup(char *str) acpi_realmode_flags |= 2; if (strncmp(str, "s3_beep", 7) == 0) acpi_realmode_flags |= 4; + if (strncmp(str, "old_ordering", 12) == 0) + acpi_old_suspend_ordering(); str = strchr(str, ','); if (str != NULL) str += strspn(str, ", \t"); diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 0f2caea..4addf8a 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -24,10 +24,6 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; -#ifdef CONFIG_PM_SLEEP -static u32 acpi_target_sleep_state = ACPI_STATE_S0; -#endif - static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP @@ -50,9 +46,96 @@ static int acpi_sleep_prepare(u32 acpi_state) return 0; } -#ifdef CONFIG_SUSPEND -static struct platform_suspend_ops acpi_suspend_ops; +#ifdef CONFIG_PM_SLEEP +static u32 acpi_target_sleep_state = ACPI_STATE_S0; + +/* + * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the + * user to request that behavior by using the 'acpi_old_suspend_ordering' + * kernel command line option that causes the following variable to be set. + */ +static bool old_suspend_ordering; + +void __init acpi_old_suspend_ordering(void) +{ + old_suspend_ordering = true; +} + +/** + * acpi_pm_disable_gpes - Disable the GPEs. + */ +static int acpi_pm_disable_gpes(void) +{ + acpi_hw_disable_all_gpes(); + return 0; +} + +/** + * __acpi_pm_prepare - Prepare the platform to enter the target state. + * + * If necessary, set the firmware waking vector and do arch-specific + * nastiness to get the wakeup code to the waking vector. + */ +static int __acpi_pm_prepare(void) +{ + int error = acpi_sleep_prepare(acpi_target_sleep_state); + + if (error) + acpi_target_sleep_state = ACPI_STATE_S0; + return error; +} + +/** + * acpi_pm_prepare - Prepare the platform to enter the target sleep + * state and disable the GPEs. + */ +static int acpi_pm_prepare(void) +{ + int error = __acpi_pm_prepare(); + + if (!error) + acpi_hw_disable_all_gpes(); + return error; +} + +/** + * acpi_pm_finish - Instruct the platform to leave a sleep state. + * + * This is called after we wake back up (or if entering the sleep state + * failed). + */ +static void acpi_pm_finish(void) +{ + u32 acpi_state = acpi_target_sleep_state; + + if (acpi_state == ACPI_STATE_S0) + return; + printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", + acpi_state); + acpi_disable_wakeup_device(acpi_state); + acpi_leave_sleep_state(acpi_state); + + /* reset firmware waking vector */ + acpi_set_firmware_waking_vector((acpi_physical_address) 0); + + acpi_target_sleep_state = ACPI_STATE_S0; +} + +/** + * acpi_pm_end - Finish up suspend sequence. + */ +static void acpi_pm_end(void) +{ + /* + * This is necessary in case acpi_pm_finish() is not called during a + * failing transition to a sleep state. + */ + acpi_target_sleep_state = ACPI_STATE_S0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_SUSPEND extern void do_suspend_lowlevel(void); static u32 acpi_suspend_states[] = { @@ -66,7 +149,6 @@ static u32 acpi_suspend_states[] = { * acpi_suspend_begin - Set the target system sleep state to the state * associated with given @pm_state, if supported. */ - static int acpi_suspend_begin(suspend_state_t pm_state) { u32 acpi_state = acpi_suspend_states[pm_state]; @@ -83,25 +165,6 @@ static int acpi_suspend_begin(suspend_state_t pm_state) } /** - * acpi_suspend_prepare - Do preliminary suspend work. - * - * If necessary, set the firmware waking vector and do arch-specific - * nastiness to get the wakeup code to the waking vector. - */ - -static int acpi_suspend_prepare(void) -{ - int error = acpi_sleep_prepare(acpi_target_sleep_state); - - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - - return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; -} - -/** * acpi_suspend_enter - Actually enter a sleep state. * @pm_state: ignored * @@ -109,7 +172,6 @@ static int acpi_suspend_prepare(void) * assembly, which in turn call acpi_enter_sleep_state(). * It's unfortunate, but it works. Please fix if you're feeling frisky. */ - static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; @@ -166,39 +228,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state) return ACPI_SUCCESS(status) ? 0 : -EFAULT; } -/** - * acpi_suspend_finish - Instruct the platform to leave a sleep state. - * - * This is called after we wake back up (or if entering the sleep state - * failed). - */ - -static void acpi_suspend_finish(void) -{ - u32 acpi_state = acpi_target_sleep_state; - - acpi_disable_wakeup_device(acpi_state); - acpi_leave_sleep_state(acpi_state); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; -} - -/** - * acpi_suspend_end - Finish up suspend sequence. - */ - -static void acpi_suspend_end(void) -{ - /* - * This is necessary in case acpi_suspend_finish() is not called during a - * failing transition to a sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; -} - static int acpi_suspend_state_valid(suspend_state_t pm_state) { u32 acpi_state; @@ -218,10 +247,39 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state) static struct platform_suspend_ops acpi_suspend_ops = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin, - .prepare = acpi_suspend_prepare, + .prepare = acpi_pm_prepare, + .enter = acpi_suspend_enter, + .finish = acpi_pm_finish, + .end = acpi_pm_end, +}; + +/** + * acpi_suspend_begin_old - Set the target system sleep state to the + * state associated with given @pm_state, if supported, and + * execute the _PTS control method. This function is used if the + * pre-ACPI 2.0 suspend ordering has been requested. + */ +static int acpi_suspend_begin_old(suspend_state_t pm_state) +{ + int error = acpi_suspend_begin(pm_state); + + if (!error) + error = __acpi_pm_prepare(); + return error; +} + +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_suspend_ops acpi_suspend_ops_old = { + .valid = acpi_suspend_state_valid, + .begin = acpi_suspend_begin_old, + .prepare = acpi_pm_disable_gpes, .enter = acpi_suspend_enter, - .finish = acpi_suspend_finish, - .end = acpi_suspend_end, + .finish = acpi_pm_finish, + .end = acpi_pm_end, + .recover = acpi_pm_finish, }; #endif /* CONFIG_SUSPEND */ @@ -229,22 +287,9 @@ static struct platform_suspend_ops acpi_suspend_ops = { static int acpi_hibernation_begin(void) { acpi_target_sleep_state = ACPI_STATE_S4; - return 0; } -static int acpi_hibernation_prepare(void) -{ - int error = acpi_sleep_prepare(ACPI_STATE_S4); - - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - - return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; -} - static int acpi_hibernation_enter(void) { acpi_status status = AE_OK; @@ -274,52 +319,55 @@ static void acpi_hibernation_leave(void) acpi_leave_sleep_state_prep(ACPI_STATE_S4); } -static void acpi_hibernation_finish(void) +static void acpi_pm_enable_gpes(void) { - acpi_disable_wakeup_device(ACPI_STATE_S4); - acpi_leave_sleep_state(ACPI_STATE_S4); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; + acpi_hw_enable_all_runtime_gpes(); } -static void acpi_hibernation_end(void) -{ - /* - * This is necessary in case acpi_hibernation_finish() is not called - * during a failing transition to the sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; -} +static struct platform_hibernation_ops acpi_hibernation_ops = { + .begin = acpi_hibernation_begin, + .end = acpi_pm_end, + .pre_snapshot = acpi_pm_prepare, + .finish = acpi_pm_finish, + .prepare = acpi_pm_prepare, + .enter = acpi_hibernation_enter, + .leave = acpi_hibernation_leave, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, +}; -static int acpi_hibernation_pre_restore(void) +/** + * acpi_hibernation_begin_old - Set the target system sleep state to + * ACPI_STATE_S4 and execute the _PTS control method. This + * function is used if the pre-ACPI 2.0 suspend ordering has been + * requested. + */ +static int acpi_hibernation_begin_old(void) { - acpi_status status; - - status = acpi_hw_disable_all_gpes(); - - return ACPI_SUCCESS(status) ? 0 : -EFAULT; -} + int error = acpi_sleep_prepare(ACPI_STATE_S4); -static void acpi_hibernation_restore_cleanup(void) -{ - acpi_hw_enable_all_runtime_gpes(); + if (!error) + acpi_target_sleep_state = ACPI_STATE_S4; + return error; } -static struct platform_hibernation_ops acpi_hibernation_ops = { - .begin = acpi_hibernation_begin, - .end = acpi_hibernation_end, - .pre_snapshot = acpi_hibernation_prepare, - .finish = acpi_hibernation_finish, - .prepare = acpi_hibernation_prepare, +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_hibernation_ops acpi_hibernation_ops_old = { + .begin = acpi_hibernation_begin_old, + .end = acpi_pm_end, + .pre_snapshot = acpi_pm_disable_gpes, + .finish = acpi_pm_finish, + .prepare = acpi_pm_disable_gpes, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, - .pre_restore = acpi_hibernation_pre_restore, - .restore_cleanup = acpi_hibernation_restore_cleanup, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, + .recover = acpi_pm_finish, }; -#endif /* CONFIG_HIBERNATION */ +#endif /* CONFIG_HIBERNATION */ int acpi_suspend(u32 acpi_state) { @@ -461,13 +509,15 @@ int __init acpi_sleep_init(void) } } - suspend_set_ops(&acpi_suspend_ops); + suspend_set_ops(old_suspend_ordering ? + &acpi_suspend_ops_old : &acpi_suspend_ops); #endif #ifdef CONFIG_HIBERNATION status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b); if (ACPI_SUCCESS(status)) { - hibernation_set_ops(&acpi_hibernation_ops); + hibernation_set_ops(old_suspend_ordering ? + &acpi_hibernation_ops_old : &acpi_hibernation_ops); sleep_states[ACPI_STATE_S4] = 1; printk(" S4"); } diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index d571204..3250c52 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -781,8 +781,6 @@ int device_suspend(pm_message_t state) error = dpm_prepare(state); if (!error) error = dpm_suspend(state); - if (error) - device_resume(resume_event(state)); return error; } EXPORT_SYMBOL_GPL(device_suspend); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 41f7ce7..33adcf9 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -234,6 +234,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n, int acpi_check_mem_region(resource_size_t start, resource_size_t n, const char *name); +#ifdef CONFIG_PM_SLEEP +void __init acpi_old_suspend_ordering(void); +#endif /* CONFIG_PM_SLEEP */ #else /* CONFIG_ACPI */ static inline int early_acpi_boot_init(void) diff --git a/include/linux/suspend.h b/include/linux/suspend.h index a697742..e8e6915 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -86,6 +86,11 @@ typedef int __bitwise suspend_state_t; * that implement @begin(), but platforms implementing @begin() should * also provide a @end() which cleans up transitions aborted before * @enter(). + * + * @recover: Recover the platform from a suspend failure. + * Called by the PM core if the suspending of devices fails. + * This callback is optional and should only be implemented by platforms + * which require special recovery actions in that situation. */ struct platform_suspend_ops { int (*valid)(suspend_state_t state); @@ -94,6 +99,7 @@ struct platform_suspend_ops { int (*enter)(suspend_state_t state); void (*finish)(void); void (*end)(void); + void (*recover)(void); }; #ifdef CONFIG_SUSPEND @@ -149,7 +155,7 @@ extern void mark_free_pages(struct zone *zone); * The methods in this structure allow a platform to carry out special * operations required by it during a hibernation transition. * - * All the methods below must be implemented. + * All the methods below, except for @recover(), must be implemented. * * @begin: Tell the platform driver that we're starting hibernation. * Called right after shrinking memory and before freezing devices. @@ -189,6 +195,11 @@ extern void mark_free_pages(struct zone *zone); * @restore_cleanup: Clean up after a failing image restoration. * Called right after the nonboot CPUs have been enabled and before * thawing devices (runs with IRQs on). + * + * @recover: Recover the platform from a failure to suspend devices. + * Called by the PM core if the suspending of devices during hibernation + * fails. This callback is optional and should only be implemented by + * platforms which require special recovery actions in that situation. */ struct platform_hibernation_ops { int (*begin)(void); @@ -200,6 +211,7 @@ struct platform_hibernation_ops { void (*leave)(void); int (*pre_restore)(void); void (*restore_cleanup)(void); + void (*recover)(void); }; #ifdef CONFIG_HIBERNATION diff --git a/kernel/power/disk.c b/kernel/power/disk.c index d416be0..f011e08 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -180,6 +180,17 @@ static void platform_restore_cleanup(int platform_mode) } /** + * platform_recover - recover the platform from a failure to suspend + * devices. + */ + +static void platform_recover(int platform_mode) +{ + if (platform_mode && hibernation_ops && hibernation_ops->recover) + hibernation_ops->recover(); +} + +/** * create_image - freeze devices that need to be frozen with interrupts * off, create the hibernation image and thaw those devices. Control * reappears in this routine after a restore. @@ -258,10 +269,10 @@ int hibernation_snapshot(int platform_mode) suspend_console(); error = device_suspend(PMSG_FREEZE); if (error) - goto Resume_console; + goto Recover_platform; if (hibernation_test(TEST_DEVICES)) - goto Resume_devices; + goto Recover_platform; error = platform_pre_snapshot(platform_mode); if (error || hibernation_test(TEST_PLATFORM)) @@ -285,11 +296,14 @@ int hibernation_snapshot(int platform_mode) Resume_devices: device_resume(in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); - Resume_console: resume_console(); Close: platform_end(platform_mode); return error; + + Recover_platform: + platform_recover(platform_mode); + goto Resume_devices; } /** @@ -398,8 +412,11 @@ int hibernation_platform_enter(void) suspend_console(); error = device_suspend(PMSG_HIBERNATE); - if (error) - goto Resume_console; + if (error) { + if (hibernation_ops->recover) + hibernation_ops->recover(); + goto Resume_devices; + } error = hibernation_ops->prepare(); if (error) @@ -428,7 +445,6 @@ int hibernation_platform_enter(void) hibernation_ops->finish(); Resume_devices: device_resume(PMSG_RESTORE); - Resume_console: resume_console(); Close: hibernation_ops->end(); diff --git a/kernel/power/main.c b/kernel/power/main.c index d023b6b..3398f46 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -269,11 +269,11 @@ int suspend_devices_and_enter(suspend_state_t state) error = device_suspend(PMSG_SUSPEND); if (error) { printk(KERN_ERR "PM: Some devices failed to suspend\n"); - goto Resume_console; + goto Recover_platform; } if (suspend_test(TEST_DEVICES)) - goto Resume_devices; + goto Recover_platform; if (suspend_ops->prepare) { error = suspend_ops->prepare(); @@ -294,12 +294,16 @@ int suspend_devices_and_enter(suspend_state_t state) suspend_ops->finish(); Resume_devices: device_resume(PMSG_RESUME); - Resume_console: resume_console(); Close: if (suspend_ops->end) suspend_ops->end(); return error; + + Recover_platform: + if (suspend_ops->recover) + suspend_ops->recover(); + goto Resume_devices; } /** -- cgit v0.10.2 From 15650a2f644a2f15738cf22807c090d89328f500 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 16 Jun 2008 15:29:45 -0700 Subject: x86/PCI: fixup early quirk probing On x86, we do early PCI probing to apply some quirks for chipset bugs. However, in a recent cleanup (7bcbc78dea92fdf0947fa48e248da3c993a5690f) a thinko was introduced that causes us to probe all subfunctions of even single function devices (a function was factored out of an inner loop and a "break" became a "return"). Fix that up by making check_dev_quirk() return a value so we can keep the factored code intact. Acked-by: Ingo Molnar Signed-off-by: Jesse Barnes diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 9f51e1e..8566fea 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -133,7 +133,18 @@ static struct chipset early_qrk[] __initdata = { {} }; -static void __init check_dev_quirk(int num, int slot, int func) +/** + * check_dev_quirk - apply early quirks to a given PCI device + * @num: bus number + * @slot: slot number + * @func: PCI function + * + * Check the vendor & device ID against the early quirks table. + * + * If the device is single function, let early_quirks() know so we don't + * poke at this device again. + */ +static int __init check_dev_quirk(int num, int slot, int func) { u16 class; u16 vendor; @@ -144,7 +155,7 @@ static void __init check_dev_quirk(int num, int slot, int func) class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE); if (class == 0xffff) - return; + return -1; /* no class, treat as single function */ vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID); @@ -167,7 +178,9 @@ static void __init check_dev_quirk(int num, int slot, int func) type = read_pci_config_byte(num, slot, func, PCI_HEADER_TYPE); if (!(type & 0x80)) - return; + return -1; + + return 0; } void __init early_quirks(void) @@ -180,6 +193,9 @@ void __init early_quirks(void) /* Poor man's PCI discovery */ for (num = 0; num < 32; num++) for (slot = 0; slot < 32; slot++) - for (func = 0; func < 8; func++) - check_dev_quirk(num, slot, func); + for (func = 0; func < 8; func++) { + /* Only probe function 0 on single fn devices */ + if (check_dev_quirk(num, slot, func)) + break; + } } -- cgit v0.10.2 From 65b943f630bc177b743ca05b4cb6defe8fcffa6e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 25 Jun 2008 15:27:34 -0700 Subject: PCI: fixup kdoc blocks for hotplug functions A few warnings snuck in as parameters were added or renamed. Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index b3b2d8c..b514162 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -544,7 +544,9 @@ out: /** * pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem + * @bus: bus this slot is on * @slot: pointer to the &struct hotplug_slot to register + * @slot_nr: slot number * * Registers a hotplug slot with the pci hotplug subsystem, which will allow * userspace interaction to the slot. @@ -615,7 +617,7 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) /** * pci_hp_deregister - deregister a hotplug_slot with the PCI hotplug subsystem - * @slot: pointer to the &struct hotplug_slot to deregister + * @hotplug: pointer to the &struct hotplug_slot to deregister * * The @slot must have been registered with the pci hotplug subsystem * previously with a call to pci_hp_register(). @@ -651,7 +653,7 @@ int pci_hp_deregister(struct hotplug_slot *hotplug) /** * pci_hp_change_slot_info - changes the slot's information structure in the core - * @slot: pointer to the slot whose info has changed + * @hotplug: pointer to the slot whose info has changed * @info: pointer to the info copy into the slot's info structure * * @slot must have been registered with the pci -- cgit v0.10.2 From b30dd56d1c3786fb0c4e442a58d9a2ea78eeabb9 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 20 Jun 2008 12:06:24 +0900 Subject: pciehp: fix typo in hpc_release_ctlr Fix the typo in hpc_release_ctlr(). Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 0cfaedf..c030c94 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -610,7 +610,7 @@ static void hpc_release_ctlr(struct controller *ctrl) { /* Mask Hot-plug Interrupt Enable */ if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) - err("%s: Cannot mask hotplut interrupt enable\n", __func__); + err("%s: Cannot mask hotplug interrupt enable\n", __func__); /* Free interrupt handler or interrupt polling timer */ pciehp_free_irq(ctrl); -- cgit v0.10.2 From 820943b6fc4781621dee52ba026106758a727dd3 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 20 Jun 2008 12:04:33 +0900 Subject: pciehp: cleanup pcie_poll_cmd Cleanup pcie_poll_cmd(): check the slot status once before entering our completion test loop and convert the loop to a simpler while() block. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index c030c94..36ea949 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -252,20 +252,23 @@ static inline int pcie_poll_cmd(struct controller *ctrl) u16 slot_status; int timeout = 1000; - if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) - if (slot_status & CMD_COMPLETED) - goto completed; - for (timeout = 1000; timeout > 0; timeout -= 100) { + if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) { + if (slot_status & CMD_COMPLETED) { + pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED); + return 1; + } + } + while (timeout > 1000) { msleep(100); - if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) - if (slot_status & CMD_COMPLETED) - goto completed; + timeout -= 100; + if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) { + if (slot_status & CMD_COMPLETED) { + pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED); + return 1; + } + } } return 0; /* timeout */ - -completed: - pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED); - return timeout; } static inline void pcie_wait_cmd(struct controller *ctrl, int poll) -- cgit v0.10.2 From 66618bad123494beb30c0d590460e972e5b0977e Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 20 Jun 2008 12:05:12 +0900 Subject: pciehp: change command polling frequency Change command polling frequency to 100Hz from 10Hz in order to reduce the delay in the common case of a command completing quickly. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 36ea949..5ef4bae 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -259,8 +259,8 @@ static inline int pcie_poll_cmd(struct controller *ctrl) } } while (timeout > 1000) { - msleep(100); - timeout -= 100; + msleep(10); + timeout -= 10; if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) { if (slot_status & CMD_COMPLETED) { pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED); -- cgit v0.10.2 From 563f119080b505076429b47722fbf6374b546fa7 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 20 Jun 2008 12:05:52 +0900 Subject: pciehp: remove inline from command related functions The pcie_poll_cmd() and pcie_wait_cmd() are too large to be inlined. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 5ef4bae..59c2809 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -247,7 +247,7 @@ static inline void pciehp_free_irq(struct controller *ctrl) free_irq(ctrl->pci_dev->irq, ctrl); } -static inline int pcie_poll_cmd(struct controller *ctrl) +static int pcie_poll_cmd(struct controller *ctrl) { u16 slot_status; int timeout = 1000; @@ -271,7 +271,7 @@ static inline int pcie_poll_cmd(struct controller *ctrl) return 0; /* timeout */ } -static inline void pcie_wait_cmd(struct controller *ctrl, int poll) +static void pcie_wait_cmd(struct controller *ctrl, int poll) { unsigned int msecs = pciehp_poll_mode ? 2500 : 1000; unsigned long timeout = msecs_to_jiffies(msecs); -- cgit v0.10.2 From b86ec7ed2877f560ff069e8ed1b433a9005619c6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 20 Jun 2008 11:54:06 +0900 Subject: Remove unnecessary 'tmp' variable from pci_hp_register(). Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index b514162..5f85b1b 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -557,7 +557,6 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) { int result; struct pci_slot *pci_slot; - struct hotplug_slot *tmp; if (slot == NULL) return -ENODEV; @@ -570,8 +569,7 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) } /* Check if we have already registered a slot with the same name. */ - tmp = get_slot_from_name(slot->name); - if (tmp) + if (get_slot_from_name(slot->name)) return -EEXIST; /* -- cgit v0.10.2 From 80ccba1186d48fa728dc4b1456cc07ffb07da501 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 13 Jun 2008 10:52:11 -0600 Subject: PCI: use dev_printk when possible Convert printks to use dev_printk(). I converted pr_debug() to dev_dbg(). Both use KERN_DEBUG and are enabled only when DEBUG is defined. I converted printk(KERN_DEBUG) to dev_printk(KERN_DEBUG), not to dev_dbg(), because dev_dbg() is only enabled when DEBUG is defined. I converted DBG(KERN_INFO) (only in setup-bus.c) to dev_info(). The DBG() name makes it sound like debug, but it's been enabled forever, so dev_info() preserves the previous behavior. I tried to make the resource assignment formats more consistent, e.g., "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] flags %#lx\n" instead of sometimes using "start-end" and sometimes using "size@start". I'm not attached to one or the other; I'd just like them consistent. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index ccb1974..15af618 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -565,9 +565,8 @@ int pci_enable_msi(struct pci_dev* dev) /* Check whether driver already requested for MSI-X irqs */ if (dev->msix_enabled) { - printk(KERN_INFO "PCI: %s: Can't enable MSI. " - "Device already has MSI-X enabled\n", - pci_name(dev)); + dev_info(&dev->dev, "can't enable MSI " + "(MSI-X already enabled)\n"); return -EINVAL; } status = msi_capability_init(dev); @@ -690,9 +689,8 @@ int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) /* Check whether driver already requested for MSI irq */ if (dev->msi_enabled) { - printk(KERN_INFO "PCI: %s: Can't enable MSI-X. " - "Device already has an MSI irq assigned\n", - pci_name(dev)); + dev_info(&dev->dev, "can't enable MSI-X " + "(MSI IRQ already assigned)\n"); return -EINVAL; } status = msix_capability_init(dev, entries, nvec); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 7869f8f..8b755a7 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -422,8 +422,8 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) * to sleep if we're already in a low power state */ if (state != PCI_D0 && dev->current_state > state) { - printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n", - __func__, pci_name(dev), state, dev->current_state); + dev_err(&dev->dev, "invalid power transition " + "(from state %d to %d)\n", dev->current_state, state); return -EINVAL; } else if (dev->current_state == state) return 0; /* we're already there */ @@ -431,9 +431,8 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc); if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { - printk(KERN_DEBUG - "PCI: %s has unsupported PM cap regs version (%u)\n", - pci_name(dev), pmc & PCI_PM_CAP_VER_MASK); + dev_printk(KERN_DEBUG, &dev->dev, "unsupported PM cap regs " + "version (%u)\n", pmc & PCI_PM_CAP_VER_MASK); return -EIO; } @@ -541,7 +540,8 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) case PM_EVENT_HIBERNATE: return PCI_D3hot; default: - printk("Unrecognized suspend event %d\n", state.event); + dev_info(&dev->dev, "unrecognized suspend event %d\n", + state.event); BUG(); } return PCI_D0; @@ -566,7 +566,7 @@ static int pci_save_pcie_state(struct pci_dev *dev) else found = 1; if (!save_state) { - dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n"); + dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n"); return -ENOMEM; } cap = (u16 *)&save_state->data[0]; @@ -617,7 +617,7 @@ static int pci_save_pcix_state(struct pci_dev *dev) else found = 1; if (!save_state) { - dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n"); + dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n"); return -ENOMEM; } cap = (u16 *)&save_state->data[0]; @@ -683,10 +683,9 @@ pci_restore_state(struct pci_dev *dev) for (i = 15; i >= 0; i--) { pci_read_config_dword(dev, i * 4, &val); if (val != dev->saved_config_space[i]) { - printk(KERN_DEBUG "PM: Writing back config space on " - "device %s at offset %x (was %x, writing %x)\n", - pci_name(dev), i, - val, (int)dev->saved_config_space[i]); + dev_printk(KERN_DEBUG, &dev->dev, "restoring config " + "space at offset %#x (was %#x, writing %#x)\n", + i, val, (int)dev->saved_config_space[i]); pci_write_config_dword(dev,i * 4, dev->saved_config_space[i]); } @@ -1114,13 +1113,11 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name) return 0; err_out: - printk (KERN_WARNING "PCI: Unable to reserve %s region #%d:%llx@%llx " - "for device %s\n", - pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem", + dev_warn(&pdev->dev, "BAR %d: can't reserve %s region [%#llx-%#llx]\n", bar + 1, /* PCI BAR # */ - (unsigned long long)pci_resource_len(pdev, bar), + pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem", (unsigned long long)pci_resource_start(pdev, bar), - pci_name(pdev)); + (unsigned long long)pci_resource_end(pdev, bar)); return -EBUSY; } @@ -1212,7 +1209,7 @@ pci_set_master(struct pci_dev *dev) pci_read_config_word(dev, PCI_COMMAND, &cmd); if (! (cmd & PCI_COMMAND_MASTER)) { - pr_debug("PCI: Enabling bus mastering for device %s\n", pci_name(dev)); + dev_dbg(&dev->dev, "enabling bus mastering\n"); cmd |= PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, cmd); } @@ -1277,8 +1274,8 @@ pci_set_cacheline_size(struct pci_dev *dev) if (cacheline_size == pci_cache_line_size) return 0; - printk(KERN_DEBUG "PCI: cache line size of %d is not supported " - "by device %s\n", pci_cache_line_size << 2, pci_name(dev)); + dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not " + "supported\n", pci_cache_line_size << 2); return -EINVAL; } @@ -1303,8 +1300,7 @@ pci_set_mwi(struct pci_dev *dev) pci_read_config_word(dev, PCI_COMMAND, &cmd); if (! (cmd & PCI_COMMAND_INVALIDATE)) { - pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", - pci_name(dev)); + dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n"); cmd |= PCI_COMMAND_INVALIDATE; pci_write_config_word(dev, PCI_COMMAND, cmd); } diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 4562827..f829119 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -277,8 +277,8 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) res->end = res->start + sz64; #else if (sz64 > 0x100000000ULL) { - printk(KERN_ERR "PCI: Unable to handle 64-bit " - "BAR for device %s\n", pci_name(dev)); + dev_err(&dev->dev, "BAR %d: can't handle 64-bit" + " BAR\n", pos); res->start = 0; res->flags = 0; } else if (lhi) { @@ -329,7 +329,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) return; if (dev->transparent) { - printk(KERN_INFO "PCI: Transparent bridge - %s\n", pci_name(dev)); + dev_info(&dev->dev, "transparent bridge\n"); for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++) child->resource[i] = child->parent->resource[i - 3]; } @@ -392,7 +392,8 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) limit |= ((long) mem_limit_hi) << 32; #else if (mem_base_hi || mem_limit_hi) { - printk(KERN_ERR "PCI: Unable to handle 64-bit address space for bridge %s\n", pci_name(dev)); + dev_err(&dev->dev, "can't handle 64-bit " + "address space for bridge\n"); return; } #endif @@ -512,8 +513,8 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); - pr_debug("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n", - pci_name(dev), buses & 0xffffff, pass); + dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n", + buses & 0xffffff, pass); /* Disable MasterAbortMode during probing to avoid reporting of bus errors (in some architectures) */ @@ -536,8 +537,8 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, * ignore it. This can happen with the i450NX chipset. */ if (pci_find_bus(pci_domain_nr(bus), busnr)) { - printk(KERN_INFO "PCI: Bus %04x:%02x already known\n", - pci_domain_nr(bus), busnr); + dev_info(&dev->dev, "bus %04x:%02x already known\n", + pci_domain_nr(bus), busnr); goto out; } @@ -721,7 +722,7 @@ static int pci_setup_device(struct pci_dev * dev) dev->class = class; class >>= 8; - pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev), + dev_dbg(&dev->dev, "found [%04x/%04x] class %06x header type %02x\n", dev->vendor, dev->device, class, dev->hdr_type); /* "Unknown power state" */ @@ -789,13 +790,13 @@ static int pci_setup_device(struct pci_dev * dev) break; default: /* unknown header */ - printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n", - pci_name(dev), dev->hdr_type); + dev_err(&dev->dev, "unknown header type %02x, " + "ignoring device\n", dev->hdr_type); return -1; bad: - printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n", - pci_name(dev), class, dev->hdr_type); + dev_err(&dev->dev, "ignoring class %02x (doesn't match header " + "type %02x)\n", class, dev->hdr_type); dev->class = PCI_CLASS_NOT_DEFINED; } @@ -971,7 +972,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) return NULL; /* Card hasn't responded in 60 seconds? Must be stuck. */ if (delay > 60 * 1000) { - printk(KERN_WARNING "Device %04x:%02x:%02x.%d not " + printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not " "responding\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 8ddb918..827c0a5 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -27,13 +27,6 @@ #include -#define DEBUG_CONFIG 1 -#if DEBUG_CONFIG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - static void pbus_assign_resources_sorted(struct pci_bus *bus) { struct pci_dev *dev; @@ -81,8 +74,8 @@ void pci_setup_cardbus(struct pci_bus *bus) struct pci_dev *bridge = bus->self; struct pci_bus_region region; - printk("PCI: Bus %d, cardbus bridge: %s\n", - bus->number, pci_name(bridge)); + dev_info(&bridge->dev, "CardBus bridge, secondary bus %04x:%02x\n", + pci_domain_nr(bus), bus->number); pcibios_resource_to_bus(bridge, ®ion, bus->resource[0]); if (bus->resource[0]->flags & IORESOURCE_IO) { @@ -90,7 +83,7 @@ void pci_setup_cardbus(struct pci_bus *bus) * The IO resource is allocated a range twice as large as it * would normally need. This allows us to set both IO regs. */ - printk(KERN_INFO " IO window: 0x%08lx-0x%08lx\n", + dev_info(&bridge->dev, " IO window: %#08lx-%#08lx\n", (unsigned long)region.start, (unsigned long)region.end); pci_write_config_dword(bridge, PCI_CB_IO_BASE_0, @@ -101,7 +94,7 @@ void pci_setup_cardbus(struct pci_bus *bus) pcibios_resource_to_bus(bridge, ®ion, bus->resource[1]); if (bus->resource[1]->flags & IORESOURCE_IO) { - printk(KERN_INFO " IO window: 0x%08lx-0x%08lx\n", + dev_info(&bridge->dev, " IO window: %#08lx-%#08lx\n", (unsigned long)region.start, (unsigned long)region.end); pci_write_config_dword(bridge, PCI_CB_IO_BASE_1, @@ -112,7 +105,7 @@ void pci_setup_cardbus(struct pci_bus *bus) pcibios_resource_to_bus(bridge, ®ion, bus->resource[2]); if (bus->resource[2]->flags & IORESOURCE_MEM) { - printk(KERN_INFO " PREFETCH window: 0x%08lx-0x%08lx\n", + dev_info(&bridge->dev, " PREFETCH window: %#08lx-%#08lx\n", (unsigned long)region.start, (unsigned long)region.end); pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0, @@ -123,7 +116,7 @@ void pci_setup_cardbus(struct pci_bus *bus) pcibios_resource_to_bus(bridge, ®ion, bus->resource[3]); if (bus->resource[3]->flags & IORESOURCE_MEM) { - printk(KERN_INFO " MEM window: 0x%08lx-0x%08lx\n", + dev_info(&bridge->dev, " MEM window: %#08lx-%#08lx\n", (unsigned long)region.start, (unsigned long)region.end); pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1, @@ -151,7 +144,8 @@ static void pci_setup_bridge(struct pci_bus *bus) struct pci_bus_region region; u32 l, bu, lu, io_upper16; - DBG(KERN_INFO "PCI: Bridge: %s\n", pci_name(bridge)); + dev_info(&bridge->dev, "PCI bridge, secondary bus %04x:%02x\n", + pci_domain_nr(bus), bus->number); /* Set up the top and bottom of the PCI I/O segment for this bus. */ pcibios_resource_to_bus(bridge, ®ion, bus->resource[0]); @@ -162,7 +156,7 @@ static void pci_setup_bridge(struct pci_bus *bus) l |= region.end & 0xf000; /* Set up upper 16 bits of I/O base/limit. */ io_upper16 = (region.end & 0xffff0000) | (region.start >> 16); - DBG(KERN_INFO " IO window: %04lx-%04lx\n", + dev_info(&bridge->dev, " IO window: %#04lx-%#04lx\n", (unsigned long)region.start, (unsigned long)region.end); } @@ -170,7 +164,7 @@ static void pci_setup_bridge(struct pci_bus *bus) /* Clear upper 16 bits of I/O base/limit. */ io_upper16 = 0; l = 0x00f0; - DBG(KERN_INFO " IO window: disabled.\n"); + dev_info(&bridge->dev, " IO window: disabled\n"); } /* Temporarily disable the I/O range before updating PCI_IO_BASE. */ pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff); @@ -185,13 +179,13 @@ static void pci_setup_bridge(struct pci_bus *bus) if (bus->resource[1]->flags & IORESOURCE_MEM) { l = (region.start >> 16) & 0xfff0; l |= region.end & 0xfff00000; - DBG(KERN_INFO " MEM window: 0x%08lx-0x%08lx\n", + dev_info(&bridge->dev, " MEM window: %#08lx-%#08lx\n", (unsigned long)region.start, (unsigned long)region.end); } else { l = 0x0000fff0; - DBG(KERN_INFO " MEM window: disabled.\n"); + dev_info(&bridge->dev, " MEM window: disabled\n"); } pci_write_config_dword(bridge, PCI_MEMORY_BASE, l); @@ -208,13 +202,13 @@ static void pci_setup_bridge(struct pci_bus *bus) l |= region.end & 0xfff00000; bu = upper_32_bits(region.start); lu = upper_32_bits(region.end); - DBG(KERN_INFO " PREFETCH window: 0x%016llx-0x%016llx\n", + dev_info(&bridge->dev, " PREFETCH window: %#016llx-%#016llx\n", (unsigned long long)region.start, (unsigned long long)region.end); } else { l = 0x0000fff0; - DBG(KERN_INFO " PREFETCH window: disabled.\n"); + dev_info(&bridge->dev, " PREFETCH window: disabled\n"); } pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l); @@ -361,9 +355,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start; order = __ffs(align) - 20; if (order > 11) { - printk(KERN_WARNING "PCI: region %s/%d " - "too large: 0x%016llx-0x%016llx\n", - pci_name(dev), i, + dev_warn(&dev->dev, "BAR %d too large: " + "%#016llx-%#016llx\n", i, (unsigned long long)r->start, (unsigned long long)r->end); r->flags = 0; @@ -529,8 +522,8 @@ void __ref pci_bus_assign_resources(struct pci_bus *bus) break; default: - printk(KERN_INFO "PCI: not setting up bridge %s " - "for bus %d\n", pci_name(dev), b->number); + dev_info(&dev->dev, "not setting up bridge for bus " + "%04x:%02x\n", pci_domain_nr(b), b->number); break; } } diff --git a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c index 05ca2ed..aa795fd 100644 --- a/drivers/pci/setup-irq.c +++ b/drivers/pci/setup-irq.c @@ -47,8 +47,7 @@ pdev_fixup_irq(struct pci_dev *dev, } dev->irq = irq; - pr_debug("PCI: fixup irq: (%s) got %d\n", - kobject_name(&dev->dev.kobj), dev->irq); + dev_dbg(&dev->dev, "fixup irq: got %d\n", dev->irq); /* Always tell the device, so the driver knows what is the real IRQ to use; the device does not use it. */ diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 7d35cdf..1a5fc83 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -26,8 +26,7 @@ #include "pci.h" -void -pci_update_resource(struct pci_dev *dev, struct resource *res, int resno) +void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno) { struct pci_bus_region region; u32 new, check, mask; @@ -43,20 +42,20 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno) /* * Ignore non-moveable resources. This might be legacy resources for * which no functional BAR register exists or another important - * system resource we should better not move around in system address - * space. + * system resource we shouldn't move around. */ if (res->flags & IORESOURCE_PCI_FIXED) return; pcibios_resource_to_bus(dev, ®ion, res); - pr_debug(" got res [%llx:%llx] bus [%llx:%llx] flags %lx for " - "BAR %d of %s\n", (unsigned long long)res->start, + dev_dbg(&dev->dev, "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] " + "flags %#lx\n", resno, + (unsigned long long)res->start, (unsigned long long)res->end, (unsigned long long)region.start, (unsigned long long)region.end, - (unsigned long)res->flags, resno, pci_name(dev)); + (unsigned long)res->flags); new = region.start | (res->flags & PCI_REGION_FLAG_MASK); if (res->flags & IORESOURCE_IO) @@ -81,9 +80,8 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno) pci_read_config_dword(dev, reg, &check); if ((new ^ check) & mask) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resno, - new, check); + dev_err(&dev->dev, "BAR %d: error updating (%#08x != %#08x)\n", + resno, new, check); } if ((new & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) == @@ -92,15 +90,14 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno) pci_write_config_dword(dev, reg + 4, new); pci_read_config_dword(dev, reg + 4, &check); if (check != new) { - printk(KERN_ERR "PCI: Error updating region " - "%s/%d (high %08x != %08x)\n", - pci_name(dev), resno, new, check); + dev_err(&dev->dev, "BAR %d: error updating " + "(high %#08x != %#08x)\n", resno, new, check); } } res->flags &= ~IORESOURCE_UNSET; - pr_debug("PCI: moved device %s resource %d (%lx) to %x\n", - pci_name(dev), resno, res->flags, - new & ~PCI_REGION_FLAG_MASK); + dev_dbg(&dev->dev, "BAR %d: moved to bus [%#llx-%#llx] flags %#lx\n", + resno, (unsigned long long)region.start, + (unsigned long long)region.end, res->flags); } int pci_claim_resource(struct pci_dev *dev, int resource) @@ -117,10 +114,11 @@ int pci_claim_resource(struct pci_dev *dev, int resource) err = insert_resource(root, res); if (err) { - printk(KERN_ERR "PCI: %s region %d of %s %s [%llx:%llx]\n", - root ? "Address space collision on" : - "No parent found for", - resource, dtype, pci_name(dev), + dev_err(&dev->dev, "BAR %d: %s of %s [%#llx-%#llx]\n", + resource, + root ? "address space collision on" : + "no parent found for", + dtype, (unsigned long long)res->start, (unsigned long long)res->end); } @@ -140,11 +138,10 @@ int pci_assign_resource(struct pci_dev *dev, int resno) align = resource_alignment(res); if (!align) { - printk(KERN_ERR "PCI: Cannot allocate resource (bogus " - "alignment) %d [%llx:%llx] (flags %lx) of %s\n", + dev_err(&dev->dev, "BAR %d: can't allocate resource (bogus " + "alignment) [%#llx-%#llx] flags %#lx\n", resno, (unsigned long long)res->start, - (unsigned long long)res->end, res->flags, - pci_name(dev)); + (unsigned long long)res->end, res->flags); return -EINVAL; } @@ -165,11 +162,11 @@ int pci_assign_resource(struct pci_dev *dev, int resno) } if (ret) { - printk(KERN_ERR "PCI: Failed to allocate %s resource " - "#%d:%llx@%llx for %s\n", + dev_err(&dev->dev, "BAR %d: can't allocate %s resource " + "[%#llx-%#llx]\n", resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", - resno, (unsigned long long)size, - (unsigned long long)res->start, pci_name(dev)); + (unsigned long long)res->start, + (unsigned long long)res->end); } else { res->flags &= ~IORESOURCE_STARTALIGN; if (resno < PCI_BRIDGE_RESOURCES) @@ -205,11 +202,11 @@ int pci_assign_resource_fixed(struct pci_dev *dev, int resno) } if (ret) { - printk(KERN_ERR "PCI: Failed to allocate %s resource " - "#%d:%llx@%llx for %s\n", + dev_err(&dev->dev, "BAR %d: can't allocate %s resource " + "[%#llx-%#llx\n]", resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", - resno, (unsigned long long)(res->end - res->start + 1), - (unsigned long long)res->start, pci_name(dev)); + (unsigned long long)res->start, + (unsigned long long)res->end); } else if (resno < PCI_BRIDGE_RESOURCES) { pci_update_resource(dev, res, resno); } @@ -239,11 +236,10 @@ void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) r_align = resource_alignment(r); if (!r_align) { - printk(KERN_WARNING "PCI: bogus alignment of resource " - "%d [%llx:%llx] (flags %lx) of %s\n", + dev_warn(&dev->dev, "BAR %d: bogus alignment " + "[%#llx-%#llx] flags %#lx\n", i, (unsigned long long)r->start, - (unsigned long long)r->end, r->flags, - pci_name(dev)); + (unsigned long long)r->end, r->flags); continue; } for (list = head; ; list = list->next) { @@ -291,7 +287,7 @@ int pci_enable_resources(struct pci_dev *dev, int mask) if (!r->parent) { dev_err(&dev->dev, "device not available because of " - "BAR %d [%llx:%llx] collisions\n", i, + "BAR %d [%#llx-%#llx] collisions\n", i, (unsigned long long) r->start, (unsigned long long) r->end); return -EINVAL; -- cgit v0.10.2 From 531f254e5cdadb894f04ed27107cdb34c15817ea Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 13 Jun 2008 10:52:12 -0600 Subject: PCIE: aer: use dev_printk when possible Convert printks to use dev_printk(). Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index b7a3aa6..77036f4 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -220,8 +220,7 @@ static int __devinit aer_probe (struct pcie_device *dev, /* Alloc rpc data structure */ if (!(rpc = aer_alloc_rpc(dev))) { - printk(KERN_DEBUG "%s: Alloc rpc fails on PCIE device[%s]\n", - __func__, device->bus_id); + dev_printk(KERN_DEBUG, device, "alloc rpc failed\n"); aer_remove(dev); return -ENOMEM; } @@ -229,8 +228,7 @@ static int __devinit aer_probe (struct pcie_device *dev, /* Request IRQ ISR */ if ((status = request_irq(dev->irq, aer_irq, IRQF_SHARED, "aerdrv", dev))) { - printk(KERN_DEBUG "%s: Request ISR fails on PCIE device[%s]\n", - __func__, device->bus_id); + dev_printk(KERN_DEBUG, device, "request IRQ failed\n"); aer_remove(dev); return status; } @@ -274,7 +272,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev) * to issue Configuration Requests to those devices. */ msleep(200); - printk(KERN_DEBUG "Complete link reset at Root[%s]\n", dev->dev.bus_id); + dev_printk(KERN_DEBUG, &dev->dev, "Root Port link has been reset\n"); /* Enable Root Port's interrupt in response to error messages */ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status); diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index d39a78d..30f581b 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -50,10 +50,10 @@ int aer_osc_setup(struct pcie_device *pciedev) } if (ACPI_FAILURE(status)) { - printk(KERN_DEBUG "AER service couldn't init device %s - %s\n", - pciedev->device.bus_id, - (status == AE_SUPPORT || status == AE_NOT_FOUND) ? - "no _OSC support" : "Run ACPI _OSC fails"); + dev_printk(KERN_DEBUG, &pciedev->device, "AER service couldn't " + "init device: %s\n", + (status == AE_SUPPORT || status == AE_NOT_FOUND) ? + "no _OSC support" : "_OSC failed"); return -1; } diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index aaa8239..ee5e7b5 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -221,9 +221,9 @@ static void report_error_detected(struct pci_dev *dev, void *data) * of a driver for this device is unaware of * its hw state. */ - printk(KERN_DEBUG "Device ID[%s] has %s\n", - dev->dev.bus_id, (dev->driver) ? - "no AER-aware driver" : "no driver"); + dev_printk(KERN_DEBUG, &dev->dev, "device has %s\n", + dev->driver ? + "no AER-aware driver" : "no driver"); } return; } @@ -304,7 +304,7 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev, { struct aer_broadcast_data result_data; - printk(KERN_DEBUG "Broadcast %s message\n", error_mesg); + dev_printk(KERN_DEBUG, &dev->dev, "broadcast %s message\n", error_mesg); result_data.state = state; if (cb == report_error_detected) result_data.result = PCI_ERS_RESULT_CAN_RECOVER; @@ -404,18 +404,16 @@ static pci_ers_result_t reset_link(struct pcie_device *aerdev, data.aer_driver = to_service_driver(aerdev->device.driver); } else { - printk(KERN_DEBUG "No link-reset support to Device ID" - "[%s]\n", - dev->dev.bus_id); + dev_printk(KERN_DEBUG, &dev->dev, "no link-reset " + "support\n"); return PCI_ERS_RESULT_DISCONNECT; } } status = data.aer_driver->reset_link(udev); if (status != PCI_ERS_RESULT_RECOVERED) { - printk(KERN_DEBUG "Link reset at upstream Device ID" - "[%s] failed\n", - udev->dev.bus_id); + dev_printk(KERN_DEBUG, &dev->dev, "link reset at upstream " + "device %s failed\n", pci_name(udev)); return PCI_ERS_RESULT_DISCONNECT; } @@ -511,10 +509,12 @@ static void handle_error_source(struct pcie_device * aerdev, } else { status = do_recovery(aerdev, dev, info.severity); if (status == PCI_ERS_RESULT_RECOVERED) { - printk(KERN_DEBUG "AER driver successfully recovered\n"); + dev_printk(KERN_DEBUG, &dev->dev, "AER driver " + "successfully recovered\n"); } else { /* TODO: Should kernel panic here? */ - printk(KERN_DEBUG "AER driver didn't recover\n"); + dev_printk(KERN_DEBUG, &dev->dev, "AER driver didn't " + "recover\n"); } } } -- cgit v0.10.2 From 34438ba602f9b8904aafe7559046ea68e99e88a0 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 13 Jun 2008 10:52:13 -0600 Subject: PCIE: port driver: use dev_printk when possible Convert printks to use dev_printk(). Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index fb0abfa..890f0d2 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -23,20 +23,20 @@ static int pcie_port_probe_service(struct device *dev) { struct pcie_device *pciedev; struct pcie_port_service_driver *driver; - int status = -ENODEV; + int status; if (!dev || !dev->driver) - return status; + return -ENODEV; driver = to_service_driver(dev->driver); if (!driver || !driver->probe) - return status; + return -ENODEV; pciedev = to_pcie_device(dev); status = driver->probe(pciedev, driver->id_table); if (!status) { - printk(KERN_DEBUG "Load service driver %s on pcie device %s\n", - driver->name, dev->bus_id); + dev_printk(KERN_DEBUG, dev, "service driver %s loaded\n", + driver->name); get_device(dev); } return status; @@ -53,8 +53,8 @@ static int pcie_port_remove_service(struct device *dev) pciedev = to_pcie_device(dev); driver = to_service_driver(dev->driver); if (driver && driver->remove) { - printk(KERN_DEBUG "Unload service driver %s on pcie device %s\n", - driver->name, dev->bus_id); + dev_printk(KERN_DEBUG, dev, "unloading service driver %s\n", + driver->name); driver->remove(pciedev); put_device(dev); } @@ -103,7 +103,7 @@ static int pcie_port_resume_service(struct device *dev) */ static void release_pcie_device(struct device *dev) { - printk(KERN_DEBUG "Free Port Service[%s]\n", dev->bus_id); + dev_printk(KERN_DEBUG, dev, "free port service\n"); kfree(to_pcie_device(dev)); } @@ -150,7 +150,7 @@ static int assign_interrupt_mode(struct pci_dev *dev, int *vectors, int mask) if (pos) { struct msix_entry msix_entries[PCIE_PORT_DEVICE_MAXSERVICES] = {{0, 0}, {0, 1}, {0, 2}, {0, 3}}; - printk("%s Found MSIX capability\n", __func__); + dev_info(&dev->dev, "found MSI-X capability\n"); status = pci_enable_msix(dev, msix_entries, nvec); if (!status) { int j = 0; @@ -165,7 +165,7 @@ static int assign_interrupt_mode(struct pci_dev *dev, int *vectors, int mask) if (status) { pos = pci_find_capability(dev, PCI_CAP_ID_MSI); if (pos) { - printk("%s Found MSI capability\n", __func__); + dev_info(&dev->dev, "found MSI capability\n"); status = pci_enable_msi(dev); if (!status) { interrupt_mode = PCIE_PORT_MSI_MODE; @@ -252,7 +252,7 @@ static struct pcie_device* alloc_pcie_device(struct pci_dev *parent, return NULL; pcie_device_init(parent, device, port_type, service_type, irq,irq_mode); - printk(KERN_DEBUG "Allocate Port Service[%s]\n", device->device.bus_id); + dev_printk(KERN_DEBUG, &device->device, "allocate port service\n"); return device; } diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 51d1632..367c9c2 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -91,9 +91,8 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev, pci_set_master(dev); if (!dev->irq && dev->pin) { - printk(KERN_WARNING - "%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n", - __func__, dev->vendor, dev->device); + dev_warn(&dev->dev, "device [%04x/%04x] has invalid IRQ; " + "check vendor BIOS\n", dev->vendor, dev->device); } if (pcie_port_device_register(dev)) { pci_disable_device(dev); -- cgit v0.10.2 From e4ec7a00ed30429030112e5591cf3138645727c2 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 25 Jun 2008 16:12:25 -0700 Subject: PCI: correct resource number in debug output If pci_request_region fails, make the warning include the resource number, not the resource number + 1. diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8b755a7..8e8ecc1 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1114,10 +1114,10 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name) err_out: dev_warn(&pdev->dev, "BAR %d: can't reserve %s region [%#llx-%#llx]\n", - bar + 1, /* PCI BAR # */ - pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem", - (unsigned long long)pci_resource_start(pdev, bar), - (unsigned long long)pci_resource_end(pdev, bar)); + bar, + pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem", + (unsigned long long)pci_resource_start(pdev, bar), + (unsigned long long)pci_resource_end(pdev, bar)); return -EBUSY; } -- cgit v0.10.2 From c4635eb06af700820d658a163f06aff12e17cfb2 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 20 Jun 2008 12:07:08 +0900 Subject: pciehp: fix interrupt initialization Current pciehp driver's intialization sequence is as follows: (1) initialize controller data structure (2) install interrupt handler (3) enable software notification (4) initialize controller specific slot data structure (5) initialize generic slot data structure and register it to pci hotplug core The interrupt handler of pciehp assumes that controller specific slot data structure is already initialized. However, it is installed at (2) before initializing controller specific slot data structure at (4). Because of this, pciehp driver cannot handle the following cases properly. - If devices that shares IRQ with pciehp raise interrupts between (2) and (4). - If hotplug events (e.g. MRL open) happen between (3) and (4). We already have a workaround for this problem ("pciehp: fix NULL dereference in interrupt handler: dbd79aed1aea2bece0bf43cc2ff3b2f9baf48a08). But we still need fundamental fix. This patch fix the problem by changing the initilization sequence as follows: (1) initialize controller data structure (2) initialize controller specific slot data structure (3) install interrupt handler (4) enable software notification (5) initialize generic slot data structure and register it to pci hotplug core Signed-off-by: Kenji Kaneshige Acked-by: Alex Chiang Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 8492fab..d17233a 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -43,6 +43,7 @@ extern int pciehp_poll_mode; extern int pciehp_poll_time; extern int pciehp_debug; extern int pciehp_force; +extern int pciehp_slot_with_bus; extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ @@ -156,10 +157,10 @@ extern u8 pciehp_handle_power_fault(struct slot *p_slot); extern int pciehp_configure_device(struct slot *p_slot); extern int pciehp_unconfigure_device(struct slot *p_slot); extern void pciehp_queue_pushbutton_work(struct work_struct *work); -int pcie_init(struct controller *ctrl, struct pcie_device *dev); +struct controller *pcie_init(struct pcie_device *dev); int pciehp_enable_slot(struct slot *p_slot); int pciehp_disable_slot(struct slot *p_slot); -int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev); +int pcie_enable_notification(struct controller *ctrl); static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device) { diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 7b21c86..d0fb569 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -41,7 +41,7 @@ int pciehp_debug; int pciehp_poll_mode; int pciehp_poll_time; int pciehp_force; -static int pciehp_slot_with_bus; +int pciehp_slot_with_bus; struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" @@ -183,23 +183,10 @@ static struct hotplug_slot_attribute hotplug_slot_attr_lock = { */ static void release_slot(struct hotplug_slot *hotplug_slot) { - struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); - kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot); - kfree(slot); -} - -static void make_slot_name(struct slot *slot) -{ - if (pciehp_slot_with_bus) - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d", - slot->bus, slot->number); - else - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d", - slot->number); + kfree(hotplug_slot->info); + kfree(hotplug_slot); } static int init_slots(struct controller *ctrl) @@ -208,44 +195,27 @@ static int init_slots(struct controller *ctrl) struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; int retval = -ENOMEM; - int i; - - for (i = 0; i < ctrl->num_slots; i++) { - slot = kzalloc(sizeof(*slot), GFP_KERNEL); - if (!slot) - goto error; + list_for_each_entry(slot, &ctrl->slot_list, slot_list) { hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL); if (!hotplug_slot) - goto error_slot; - slot->hotplug_slot = hotplug_slot; + goto error; info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) goto error_hpslot; - hotplug_slot->info = info; - - hotplug_slot->name = slot->name; - - slot->hp_slot = i; - slot->ctrl = ctrl; - slot->bus = ctrl->pci_dev->subordinate->number; - slot->device = ctrl->slot_device_offset + i; - slot->hpc_ops = ctrl->hpc_ops; - slot->number = ctrl->first_slot; - mutex_init(&slot->lock); - INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); /* register this slot with the hotplug pci core */ + hotplug_slot->info = info; + hotplug_slot->name = slot->name; hotplug_slot->private = slot; hotplug_slot->release = &release_slot; - make_slot_name(slot); hotplug_slot->ops = &pciehp_hotplug_slot_ops; - get_power_status(hotplug_slot, &info->power_status); get_attention_status(hotplug_slot, &info->attention_status); get_latch_status(hotplug_slot, &info->latch_status); get_adapter_status(hotplug_slot, &info->adapter_status); + slot->hotplug_slot = hotplug_slot; dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, @@ -271,8 +241,6 @@ static int init_slots(struct controller *ctrl) goto error_info; } } - - list_add(&slot->slot_list, &ctrl->slot_list); } return 0; @@ -280,27 +248,18 @@ error_info: kfree(info); error_hpslot: kfree(hotplug_slot); -error_slot: - kfree(slot); error: return retval; } static void cleanup_slots(struct controller *ctrl) { - struct list_head *tmp; - struct list_head *next; struct slot *slot; - list_for_each_safe(tmp, next, &ctrl->slot_list) { - slot = list_entry(tmp, struct slot, slot_list); - list_del(&slot->slot_list); + list_for_each_entry(slot, &ctrl->slot_list, slot_list) { if (EMI(ctrl)) sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj, &hotplug_slot_attr_lock.attr); - cancel_delayed_work(&slot->work); - flush_scheduled_work(); - flush_workqueue(pciehp_wq); pci_hp_deregister(slot->hotplug_slot); } } @@ -441,25 +400,13 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ else if (pciehp_get_hp_hw_control_from_firmware(pdev)) goto err_out_none; - ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + ctrl = pcie_init(dev); if (!ctrl) { - err("%s : out of memory\n", __func__); - goto err_out_none; - } - INIT_LIST_HEAD(&ctrl->slot_list); - - rc = pcie_init(ctrl, dev); - if (rc) { dbg("%s: controller initialization failed\n", PCIE_MODULE_NAME); - goto err_out_free_ctrl; + goto err_out_none; } - pci_set_drvdata(pdev, ctrl); - dbg("%s: ctrl bus=0x%x, device=%x, function=%x, irq=%x\n", - __func__, pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn), pdev->irq); - /* Setup the slot information structures */ rc = init_slots(ctrl); if (rc) { @@ -492,8 +439,6 @@ err_out_free_ctrl_slot: cleanup_slots(ctrl); err_out_release_ctlr: ctrl->hpc_ops->release_ctlr(ctrl); -err_out_free_ctrl: - kfree(ctrl); err_out_none: return -ENODEV; } @@ -505,7 +450,6 @@ static void pciehp_remove (struct pcie_device *dev) cleanup_slots(ctrl); ctrl->hpc_ops->release_ctlr(ctrl); - kfree(ctrl); } #ifdef CONFIG_PM @@ -525,7 +469,7 @@ static int pciehp_resume (struct pcie_device *dev) u8 status; /* reinitialize the chipset's event detection logic */ - pcie_init_hardware_part2(ctrl, dev); + pcie_enable_notification(ctrl); t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 59c2809..1ce5243 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -609,23 +609,6 @@ static void hpc_set_green_led_blink(struct slot *slot) __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); } -static void hpc_release_ctlr(struct controller *ctrl) -{ - /* Mask Hot-plug Interrupt Enable */ - if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) - err("%s: Cannot mask hotplug interrupt enable\n", __func__); - - /* Free interrupt handler or interrupt polling timer */ - pciehp_free_irq(ctrl); - - /* - * If this is the last controller to be released, destroy the - * pciehp work queue - */ - if (atomic_dec_and_test(&pciehp_num_controllers)) - destroy_workqueue(pciehp_wq); -} - static int hpc_power_on_slot(struct slot * slot) { struct controller *ctrl = slot->ctrl; @@ -798,19 +781,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) if (!(intr_loc & ~CMD_COMPLETED)) return IRQ_HANDLED; - /* - * Return without handling events if this handler routine is - * called before controller initialization is done. This may - * happen if hotplug event or another interrupt that shares - * the IRQ with pciehp arrives before slot initialization is - * done after interrupt handler is registered. - * - * FIXME - Need more structural fixes. We need to be ready to - * handle the event before installing interrupt handler. - */ p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); - if (!p_slot || !p_slot->hpc_ops) - return IRQ_HANDLED; /* Check MRL Sensor Changed */ if (intr_loc & MRL_SENS_CHANGED) @@ -987,6 +958,7 @@ static int hpc_get_cur_lnk_width(struct slot *slot, return retval; } +static void pcie_release_ctrl(struct controller *ctrl); static struct hpc_ops pciehp_hpc_ops = { .power_on_slot = hpc_power_on_slot, .power_off_slot = hpc_power_off_slot, @@ -1008,28 +980,11 @@ static struct hpc_ops pciehp_hpc_ops = { .green_led_off = hpc_set_green_led_off, .green_led_blink = hpc_set_green_led_blink, - .release_ctlr = hpc_release_ctlr, + .release_ctlr = pcie_release_ctrl, .check_lnk_status = hpc_check_lnk_status, }; -static int pcie_init_hardware_part1(struct controller *ctrl, - struct pcie_device *dev) -{ - /* Clear all remaining event bits in Slot Status register */ - if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) { - err("%s: Cannot write to SLOTSTATUS register\n", __func__); - return -1; - } - - /* Mask Hot-plug Interrupt Enable */ - if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) { - err("%s: Cannot mask hotplug interrupt enable\n", __func__); - return -1; - } - return 0; -} - -int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev) +int pcie_enable_notification(struct controller *ctrl) { u16 cmd, mask; @@ -1050,10 +1005,76 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev) err("%s: Cannot enable software notification\n", __func__); return -1; } + return 0; +} + +static void pcie_disable_notification(struct controller *ctrl) +{ + u16 mask; + mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE | + PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; + if (pcie_write_cmd(ctrl, 0, mask)) + warn("%s: Cannot disable software notification\n", __func__); +} + +static int pcie_init_notification(struct controller *ctrl) +{ + if (pciehp_request_irq(ctrl)) + return -1; + if (pcie_enable_notification(ctrl)) { + pciehp_free_irq(ctrl); + return -1; + } + return 0; +} + +static void pcie_shutdown_notification(struct controller *ctrl) +{ + pcie_disable_notification(ctrl); + pciehp_free_irq(ctrl); +} + +static void make_slot_name(struct slot *slot) +{ + if (pciehp_slot_with_bus) + snprintf(slot->name, SLOT_NAME_SIZE, "%04d_%04d", + slot->bus, slot->number); + else + snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); +} +static int pcie_init_slot(struct controller *ctrl) +{ + struct slot *slot; + + slot = kzalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) + return -ENOMEM; + + slot->hp_slot = 0; + slot->ctrl = ctrl; + slot->bus = ctrl->pci_dev->subordinate->number; + slot->device = ctrl->slot_device_offset + slot->hp_slot; + slot->hpc_ops = ctrl->hpc_ops; + slot->number = ctrl->first_slot; + make_slot_name(slot); + mutex_init(&slot->lock); + INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); + list_add(&slot->slot_list, &ctrl->slot_list); return 0; } +static void pcie_cleanup_slot(struct controller *ctrl) +{ + struct slot *slot; + slot = list_first_entry(&ctrl->slot_list, struct slot, slot_list); + list_del(&slot->slot_list); + cancel_delayed_work(&slot->work); + flush_scheduled_work(); + flush_workqueue(pciehp_wq); + kfree(slot); +} + static inline void dbg_ctrl(struct controller *ctrl) { int i; @@ -1093,11 +1114,19 @@ static inline void dbg_ctrl(struct controller *ctrl) dbg("Slot Control : 0x%04x\n", reg16); } -int pcie_init(struct controller *ctrl, struct pcie_device *dev) +struct controller *pcie_init(struct pcie_device *dev) { + struct controller *ctrl; u32 slot_cap; struct pci_dev *pdev = dev->port; + ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) { + err("%s : out of memory\n", __func__); + goto abort; + } + INIT_LIST_HEAD(&ctrl->slot_list); + ctrl->pci_dev = pdev; ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (!ctrl->cap_base) { @@ -1128,15 +1157,12 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev) !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl))) ctrl->no_cmd_complete = 1; - info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", - pdev->vendor, pdev->device, - pdev->subsystem_vendor, pdev->subsystem_device); + /* Clear all remaining event bits in Slot Status register */ + if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) + goto abort_ctrl; - if (pcie_init_hardware_part1(ctrl, dev)) - goto abort; - - if (pciehp_request_irq(ctrl)) - goto abort; + /* Disable sotfware notification */ + pcie_disable_notification(ctrl); /* * If this is the first controller to be initialized, @@ -1144,18 +1170,39 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev) */ if (atomic_add_return(1, &pciehp_num_controllers) == 1) { pciehp_wq = create_singlethread_workqueue("pciehpd"); - if (!pciehp_wq) { - goto abort_free_irq; - } + if (!pciehp_wq) + goto abort_ctrl; } - if (pcie_init_hardware_part2(ctrl, dev)) - goto abort_free_irq; + info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", + pdev->vendor, pdev->device, + pdev->subsystem_vendor, pdev->subsystem_device); + + if (pcie_init_slot(ctrl)) + goto abort_ctrl; - return 0; + if (pcie_init_notification(ctrl)) + goto abort_slot; -abort_free_irq: - pciehp_free_irq(ctrl); + return ctrl; + +abort_slot: + pcie_cleanup_slot(ctrl); +abort_ctrl: + kfree(ctrl); abort: - return -1; + return NULL; +} + +void pcie_release_ctrl(struct controller *ctrl) +{ + pcie_shutdown_notification(ctrl); + pcie_cleanup_slot(ctrl); + /* + * If this is the last controller to be released, destroy the + * pciehp work queue + */ + if (atomic_dec_and_test(&pciehp_num_controllers)) + destroy_workqueue(pciehp_wq); + kfree(ctrl); } -- cgit v0.10.2 From 3aa50c44628629a6d58f93e0a1244e95a874884e Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 26 Jun 2008 20:07:33 +0900 Subject: pciehp: remove needless command completed interrupt setting Currently, pciehp driver enables command completed interrupt as follows. (1) Don't enable at initialization. (2) Enable command completed interrupt whenever pciehp issues a command, if the command doesn't attempt to disable the interrupt. (3) Disable command completed interrupt at driver unloading. Once we enable command completed interrupt, we don't need to re-enable it for every command. So we can simplify above steps as follows: (1) Enable command completed interrupt at initialization. (2) No special sequence for command completed interrupt. (3) Disable command completed interrupt at driver unloading. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 1ce5243..1323a43 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -337,10 +337,6 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) slot_ctrl &= ~mask; slot_ctrl |= (cmd & mask); - /* Don't enable command completed if caller is changing it. */ - if (!(mask & CMD_CMPL_INTR_ENABLE)) - slot_ctrl |= CMD_CMPL_INTR_ENABLE; - ctrl->cmd_busy = 1; smp_mb(); retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl); @@ -996,10 +992,10 @@ int pcie_enable_notification(struct controller *ctrl) if (MRL_SENS(ctrl)) cmd |= MRL_DETECT_ENABLE; if (!pciehp_poll_mode) - cmd |= HP_INTR_ENABLE; + cmd |= HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; - mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | - PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | HP_INTR_ENABLE; + mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE | + PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; if (pcie_write_cmd(ctrl, cmd, mask)) { err("%s: Cannot enable software notification\n", __func__); -- cgit v0.10.2 From b97089400d44b9e90ce5029a2e458cd087473c74 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 26 Jun 2008 20:06:24 +0900 Subject: pciehp: use get_service_data Current pciehp driver saves its private data pointer into pci_dev structure using pci_set_drvdata()/pci_get_drvdata(). But because pciehp is not a pci device driver but a PCI Express service driver, it should save its private data pointer into pcie_device structure using set_service_data()/get_service_data(). Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index d0fb569..3677495 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -405,7 +405,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ dbg("%s: controller initialization failed\n", PCIE_MODULE_NAME); goto err_out_none; } - pci_set_drvdata(pdev, ctrl); + set_service_data(dev, ctrl); /* Setup the slot information structures */ rc = init_slots(ctrl); @@ -445,8 +445,7 @@ err_out_none: static void pciehp_remove (struct pcie_device *dev) { - struct pci_dev *pdev = dev->port; - struct controller *ctrl = pci_get_drvdata(pdev); + struct controller *ctrl = get_service_data(dev); cleanup_slots(ctrl); ctrl->hpc_ops->release_ctlr(ctrl); @@ -463,8 +462,7 @@ static int pciehp_resume (struct pcie_device *dev) { printk("%s ENTRY\n", __func__); if (pciehp_force) { - struct pci_dev *pdev = dev->port; - struct controller *ctrl = pci_get_drvdata(pdev); + struct controller *ctrl = get_service_data(dev); struct slot *t_slot; u8 status; -- cgit v0.10.2 From 9433f6dd3a4677e9b92c6e1cd7f98b11598b7c2c Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 26 Jun 2008 10:50:04 +0800 Subject: PCI: Fix comment of pci_dynids struct pci_driver has no field of driver_data. It's in pci_device_id. Signed-off-by: Wang Chen Signed-off-by: Jesse Barnes diff --git a/include/linux/pci.h b/include/linux/pci.h index f1f73f7..76c9a4a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -338,7 +338,7 @@ struct pci_bus_region { struct pci_dynids { spinlock_t lock; /* protects list, index */ struct list_head list; /* for IDs added at runtime */ - unsigned int use_driver_data:1; /* pci_driver->driver_data is used */ + unsigned int use_driver_data:1; /* pci_device_id->driver_data is used */ }; /* ---------------------------------------------------------------- */ -- cgit v0.10.2 From 8b285ce84bbc719e363a796f466404576b840d36 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 27 Jun 2008 13:23:20 +0100 Subject: PCI: fix pci_setup_device()'s sprinting into a const buffer Make pci_setup_device() write the bus ID directly into the allotted storage, rather than using pci_name() as the address as that now returns a const pointer. Signed-off-by: David Howells Signed-off-by: Jesse Barnes diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index f829119..0420fd8 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -713,8 +713,9 @@ static int pci_setup_device(struct pci_dev * dev) { u32 class; - sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + snprintf(dev->dev.bus_id, BUS_ID_SIZE, + "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); dev->revision = class & 0xff; -- cgit v0.10.2 From 0aea531326d1a17ccef7d9a538429c5b32cf4f12 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:33:32 +0300 Subject: PCI: remove unused arch pcibios_update_resource() functions Russell King did the following back in 2003: <-- snip --> [PCI] pci-9: Kill per-architecture pcibios_update_resource() Kill pcibios_update_resource(), replacing it with pci_update_resource(). pci_update_resource() uses pcibios_resource_to_bus() to convert a resource to a device BAR - the transformation should be exactly the same as the transformation used for the PCI bridges. pci_update_resource "knows" about 64-bit BARs, but doesn't attempt to set the high 32-bits to anything non-zero - currently no architecture attempts to do something different. If anyone cares, please fix; I'm going to reflect current behaviour for the time being. Ivan pointed out the following architectures need to examine their pcibios_update_resource() implementation - they should make sure that this new implementation does the right thing. #warning's have been added where appropriate. ia64 mips mips64 This cset also includes a fix for the problem reported by AKPM where 64-bit arch compilers complain about the resource mask being placed in a u32. <-- snip --> This patch removes the unused pcibios_update_resource() functions the kernel gained since, from FRV, m68k, mips & sh architectures. Signed-off-by: Adrian Bunk Acked-by: David Howells Acked-by: Greg Ungerer Acked-by: Paul Mundt Acked-by: Ralf Baechle Signed-off-by: Jesse Barnes diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c index 4f165c9..edae117 100644 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -19,36 +19,6 @@ #include "pci-frv.h" -#if 0 -void -pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - u32 new, check; - int reg; - - new = res->start | (res->flags & PCI_REGION_FLAG_MASK); - if (resource < 6) { - reg = PCI_BASE_ADDRESS_0 + 4*resource; - } else if (resource == PCI_ROM_RESOURCE) { - res->flags |= IORESOURCE_ROM_ENABLE; - new |= PCI_ROM_ADDRESS_ENABLE; - reg = dev->rom_base_reg; - } else { - /* Somebody might have asked allocation of a non-standard resource */ - return; - } - - pci_write_config_dword(dev, reg, new); - pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resource, - new, check); - } -} -#endif - /* * We need to avoid collisions with `mirrored' VGA ports * and other strange ISA hardware, so we always want the diff --git a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c index 6ee00ef..0a68b5a 100644 --- a/arch/m68knommu/kernel/comempci.c +++ b/arch/m68knommu/kernel/comempci.c @@ -375,15 +375,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) /*****************************************************************************/ -void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *r, int resource) -{ - printk(KERN_WARNING "%s(%d): no support for changing PCI resources...\n", - __FILE__, __LINE__); -} - - -/*****************************************************************************/ - /* * Local routines to interrcept the standard I/O and vector handling * code. Don't include this 'till now - initialization code above needs diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c index 6380662..678388f 100644 --- a/arch/mips/pmc-sierra/yosemite/ht.c +++ b/arch/mips/pmc-sierra/yosemite/ht.c @@ -345,42 +345,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pcibios_enable_resources(dev); } - - -void pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - u32 new, check; - int reg; - - return; - - new = res->start | (res->flags & PCI_REGION_FLAG_MASK); - if (resource < 6) { - reg = PCI_BASE_ADDRESS_0 + 4 * resource; - } else if (resource == PCI_ROM_RESOURCE) { - res->flags |= IORESOURCE_ROM_ENABLE; - reg = dev->rom_base_reg; - } else { - /* - * Somebody might have asked allocation of a non-standard - * resource - */ - return; - } - - pci_write_config_dword(dev, reg, new); - pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & - ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : - PCI_BASE_ADDRESS_MEM_MASK)) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resource, - new, check); - } -} - - void pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 08d2e73..f57095a 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -76,38 +76,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } -void -pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - u32 new, check; - int reg; - - new = res->start | (res->flags & PCI_REGION_FLAG_MASK); - if (resource < 6) { - reg = PCI_BASE_ADDRESS_0 + 4*resource; - } else if (resource == PCI_ROM_RESOURCE) { - res->flags |= IORESOURCE_ROM_ENABLE; - new |= PCI_ROM_ADDRESS_ENABLE; - reg = dev->rom_base_reg; - } else { - /* - * Somebody might have asked allocation of a non-standard - * resource - */ - return; - } - - pci_write_config_dword(dev, reg, new); - pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? - PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resource, - new, check); - } -} - void pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) __attribute__ ((weak)); -- cgit v0.10.2 From 80be038593dba7aa46fb24a14f0ba83e5ade0edb Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 30 Jun 2008 11:35:53 -0700 Subject: PCI: add stub for pci_set_consistent_dma_mask() When CONFIG_PCI=n, there is no stub for pci_set_consistent_dma_mask(), so add one like other similar stubs. Otherwise there can be build errors, as here: linux-next-20080630/drivers/ssb/main.c:1175: error: implicit declaration of function 'pci_set_consistent_dma_mask' Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes diff --git a/include/linux/pci.h b/include/linux/pci.h index 76c9a4a..96ebaa8 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -853,6 +853,11 @@ static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) return -EIO; } +static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) +{ + return -EIO; +} + static inline int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size) { -- cgit v0.10.2 From eebfcfb52ce753eaaa8525078bda6b539586066c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 2 Jul 2008 13:24:49 -0700 Subject: PCI: handle pci_name() being const This changes pci_setup_device to handle pci_name() now returning a constant string. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 0420fd8..2f0ae70 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -713,9 +713,9 @@ static int pci_setup_device(struct pci_dev * dev) { u32 class; - snprintf(dev->dev.bus_id, BUS_ID_SIZE, - "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), + dev->bus->number, PCI_SLOT(dev->devfn), + PCI_FUNC(dev->devfn)); pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); dev->revision = class & 0xff; -- cgit v0.10.2 From c6c4f070a61b2b6e5cd317a5fbf25255878688a2 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Thu, 3 Jul 2008 09:49:39 -0700 Subject: PCI: make pci_name use dev_name Also fixes up the sparc code that was assuming this is not a constant. Acked-by: David S. Miller Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 112b09f..d00a365 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -408,7 +408,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->class = class >> 8; dev->revision = class & 0xff; - sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), + sprintf(dev->dev.bus_id, "%04x:%02x:%02x.%d", pci_domain_nr(bus), dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); if (ofpci_verbose) diff --git a/include/linux/pci.h b/include/linux/pci.h index 96ebaa8..4c80dc3 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -996,9 +996,9 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data) /* If you want to know what to call your pci_dev, ask this function. * Again, it's a wrapper around the generic device. */ -static inline char *pci_name(struct pci_dev *pdev) +static inline const char *pci_name(struct pci_dev *pdev) { - return pdev->dev.bus_id; + return dev_name(&pdev->dev); } -- cgit v0.10.2 From 3737b2b1046900660b42e25c904b85e78139d25b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:30:55 +0200 Subject: ACPI: Introduce acpi_bus_power_manageable function Introduce function acpi_bus_power_manageable() allowing other (dependent) subsystems to check if ACPI is able to power manage given device. This may be useful, for example, for PCI device power management. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index a6dbcf4..b9b69d9 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -295,6 +295,17 @@ int acpi_bus_set_power(acpi_handle handle, int state) EXPORT_SYMBOL(acpi_bus_set_power); +bool acpi_bus_power_manageable(acpi_handle handle) +{ + struct acpi_device *device; + int result; + + result = acpi_bus_get_device(handle, &device); + return result ? false : device->flags.power_manageable; +} + +EXPORT_SYMBOL(acpi_bus_power_manageable); + /* -------------------------------------------------------------------------- Event Management -------------------------------------------------------------------------- */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index db90a74..0c21ea3 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -335,6 +335,7 @@ void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context); int acpi_bus_get_status(struct acpi_device *device); int acpi_bus_get_power(acpi_handle handle, int *state); int acpi_bus_set_power(acpi_handle handle, int state); +bool acpi_bus_power_manageable(acpi_handle handle); #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data); -- cgit v0.10.2 From 961d9120fa6f078492a1c762dd91f2c097e56c83 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:32:02 +0200 Subject: PCI: Introduce platform_pci_power_manageable function Introduce function pointer platform_pci_power_manageable to be used by the platform-related code to point to a function allowing us to check if given device is power manageable by the platform. Introduce acpi_pci_power_manageable() playing that role for ACPI. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 056ea80..e4df71ab 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -215,7 +215,6 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) } EXPORT_SYMBOL(pci_osc_control_set); -#ifdef CONFIG_ACPI_SLEEP /* * _SxD returns the D-state with the highest power * (lowest D-state number) supported in the S-state "x". @@ -259,7 +258,13 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) } return PCI_POWER_ERROR; } -#endif + +static bool acpi_pci_power_manageable(struct pci_dev *dev) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); + + return handle ? acpi_bus_power_manageable(handle) : false; +} static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) { @@ -290,6 +295,11 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) return -EINVAL; } +static struct pci_platform_pm_ops acpi_pci_platform_pm = { + .is_manageable = acpi_pci_power_manageable, + .set_state = acpi_pci_set_power_state, + .choose_state = acpi_pci_choose_state, +}; /* ACPI bus type */ static int acpi_pci_find_device(struct device *dev, acpi_handle *handle) @@ -341,10 +351,7 @@ static int __init acpi_pci_init(void) ret = register_acpi_bus_type(&acpi_pci_bus); if (ret) return 0; -#ifdef CONFIG_ACPI_SLEEP - platform_pci_choose_state = acpi_pci_choose_state; -#endif - platform_pci_set_power_state = acpi_pci_set_power_state; + pci_set_platform_pm(&acpi_pci_platform_pm); return 0; } arch_initcall(acpi_pci_init); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8e8ecc1..f807452 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -376,7 +376,32 @@ pci_restore_bars(struct pci_dev *dev) pci_update_resource(dev, &dev->resource[i], i); } -int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); +static struct pci_platform_pm_ops *pci_platform_pm; + +int pci_set_platform_pm(struct pci_platform_pm_ops *ops) +{ + if (!ops->is_manageable || !ops->set_state || !ops->choose_state) + return -EINVAL; + pci_platform_pm = ops; + return 0; +} + +static inline bool platform_pci_power_manageable(struct pci_dev *dev) +{ + return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false; +} + +static inline int platform_pci_set_power_state(struct pci_dev *dev, + pci_power_t t) +{ + return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS; +} + +static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) +{ + return pci_platform_pm ? + pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR; +} /** * pci_set_power_state - Set the power state of a PCI device @@ -479,8 +504,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) * Give firmware a chance to be called, such as ACPI _PRx, _PSx * Firmware method after native method ? */ - if (platform_pci_set_power_state) - platform_pci_set_power_state(dev, state); + platform_pci_set_power_state(dev, state); dev->current_state = state; @@ -505,8 +529,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } -pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); - /** * pci_choose_state - Choose the power state of a PCI device * @dev: PCI device to be suspended @@ -524,11 +546,9 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) if (!pci_find_capability(dev, PCI_CAP_ID_PM)) return PCI_D0; - if (platform_pci_choose_state) { - ret = platform_pci_choose_state(dev); - if (ret != PCI_POWER_ERROR) - return ret; - } + ret = platform_pci_choose_state(dev); + if (ret != PCI_POWER_ERROR) + return ret; switch (state.event) { case PM_EVENT_ON: diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index e0eff35..0cd2e71 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -5,10 +5,28 @@ extern int pci_create_sysfs_dev_files(struct pci_dev *pdev); extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev); extern void pci_cleanup_rom(struct pci_dev *dev); -/* Firmware callbacks */ -extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); -extern int (*platform_pci_set_power_state)(struct pci_dev *dev, - pci_power_t state); +/** + * Firmware PM callbacks + * + * @is_manageable - returns 'true' if given device is power manageable by the + * platform firmware + * + * @set_state - invokes the platform firmware to set the device's power state + * + * @choose_state - returns PCI power state of given device preferred by the + * platform; to be used during system-wide transitions from a + * sleeping state to the working state and vice versa + * + * If given platform is generally capable of power managing PCI devices, all of + * these callbacks are mandatory. + */ +struct pci_platform_pm_ops { + bool (*is_manageable)(struct pci_dev *dev); + int (*set_state)(struct pci_dev *dev, pci_power_t state); + pci_power_t (*choose_state)(struct pci_dev *dev); +}; + +extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); -- cgit v0.10.2 From 44e4e66eeae5338b3ca0b28f8352e60bf18d5ba8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:32:52 +0200 Subject: PCI: rework pci_set_power_state function to call platform first Rework pci_set_power_state() so that the platform callback is invoked before the native mechanism, if necessary. Also, make the function check if the device is power manageable by the platform before invoking the platform callback. This may matter if the device dependent on additional power resources controlled by the platform is being put into D0, in which case those power resources must be turned on before we attempt to handle the device itself. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index e4df71ab..6bc0d8c 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -277,12 +277,11 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) [PCI_D3hot] = ACPI_STATE_D3, [PCI_D3cold] = ACPI_STATE_D3 }; + int error = -EINVAL; - if (!handle) - return -ENODEV; /* If the ACPI device has _EJ0, ignore the device */ - if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp))) - return 0; + if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp))) + return -ENODEV; switch (state) { case PCI_D0: @@ -290,9 +289,14 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) case PCI_D2: case PCI_D3hot: case PCI_D3cold: - return acpi_bus_set_power(handle, state_conv[state]); + error = acpi_bus_set_power(handle, state_conv[state]); } - return -EINVAL; + + if (!error) + dev_printk(KERN_INFO, &dev->dev, + "power state changed by ACPI to D%d\n", state); + + return error; } static struct pci_platform_pm_ops acpi_pci_platform_pm = { diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f807452..20e2807 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -404,67 +404,56 @@ static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) } /** - * pci_set_power_state - Set the power state of a PCI device - * @dev: PCI device to be suspended - * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering + * pci_raw_set_power_state - Use PCI PM registers to set the power state of + * given PCI device + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. * - * Transition a device to a new power state, using the Power Management - * Capabilities in the device's config space. - * - * RETURN VALUE: - * -EINVAL if trying to enter a lower state than we're already in. - * 0 if we're already in the requested state. - * -EIO if device does not support PCI PM. - * 0 if we can successfully change the power state. + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if device already is in the requested state. + * 0 if device's power state has been successfully changed. */ -int -pci_set_power_state(struct pci_dev *dev, pci_power_t state) +static int +pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) { - int pm, need_restore = 0; u16 pmcsr, pmc; + bool need_restore = false; - /* bound the state we're entering */ - if (state > PCI_D3hot) - state = PCI_D3hot; - - /* - * If the device or the parent bridge can't support PCI PM, ignore - * the request if we're doing anything besides putting it into D0 - * (which would only happen on boot). - */ - if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) - return 0; - - /* find PCI PM capability in list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - - /* abort if the device doesn't support PM capabilities */ if (!pm) return -EIO; + if (state < PCI_D0 || state > PCI_D3hot) + return -EINVAL; + /* Validate current state: * Can enter D0 from any state, but if we can only go deeper * to sleep if we're already in a low power state */ - if (state != PCI_D0 && dev->current_state > state) { + if (dev->current_state == state) { + /* we're already there */ + return 0; + } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold + && dev->current_state > state) { dev_err(&dev->dev, "invalid power transition " "(from state %d to %d)\n", dev->current_state, state); return -EINVAL; - } else if (dev->current_state == state) - return 0; /* we're already there */ + } + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc); if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { - dev_printk(KERN_DEBUG, &dev->dev, "unsupported PM cap regs " - "version (%u)\n", pmc & PCI_PM_CAP_VER_MASK); + dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", + pmc & PCI_PM_CAP_VER_MASK); return -EIO; } /* check if this device supports the desired state */ - if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) - return -EIO; - else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2)) + if ((state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) + || (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))) return -EIO; pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); @@ -483,7 +472,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) - need_restore = 1; + need_restore = true; /* Fall-through: force to D0 */ default: pmcsr = 0; @@ -500,12 +489,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(200); - /* - * Give firmware a chance to be called, such as ACPI _PRx, _PSx - * Firmware method after native method ? - */ - platform_pci_set_power_state(dev, state); - dev->current_state = state; /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT @@ -530,6 +513,81 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) } /** + * pci_update_current_state - Read PCI power state of given device from its + * PCI PM registers and cache it + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + */ +static void pci_update_current_state(struct pci_dev *dev, int pm) +{ + if (pm) { + u16 pmcsr; + + pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + } +} + +/** + * pci_set_power_state - Set the power state of a PCI device + * @dev: PCI device to handle. + * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * + * Transition a device to a new power state, using the platform formware and/or + * the device's PCI PM registers. + * + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if device already is in the requested state. + * 0 if device's power state has been successfully changed. + */ +int pci_set_power_state(struct pci_dev *dev, pci_power_t state) +{ + int pm, error; + + /* bound the state we're entering */ + if (state > PCI_D3hot) + state = PCI_D3hot; + else if (state < PCI_D0) + state = PCI_D0; + else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) + /* + * If the device or the parent bridge do not support PCI PM, + * ignore the request if we're doing anything other than putting + * it into D0 (which would only happen on boot). + */ + return 0; + + /* Find PCI PM capability in the list */ + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + + if (state == PCI_D0 && platform_pci_power_manageable(dev)) { + /* + * Allow the platform to change the state, for example via ACPI + * _PR0, _PS0 and some such, but do not trust it. + */ + int ret = platform_pci_set_power_state(dev, PCI_D0); + if (!ret) + pci_update_current_state(dev, pm); + } + + error = pci_raw_set_power_state(dev, pm, state); + + if (state > PCI_D0 && platform_pci_power_manageable(dev)) { + /* Allow the platform to finalize the transition */ + int ret = platform_pci_set_power_state(dev, state); + if (!ret) { + pci_update_current_state(dev, pm); + error = 0; + } + } + + return error; +} + +/** * pci_choose_state - Choose the power state of a PCI device * @dev: PCI device to be suspended * @state: target sleep state for the whole system. This is the value -- cgit v0.10.2 From 77e766099efc29d8b01db4b8244ff64fa3d3d0ca Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:33:34 +0200 Subject: ACPI: Introduce acpi_device_sleep_wake function The currect ACPI code attempts to execute _PSW at three different places and in one of them only it tries to execute _DSW before _PSW, which is inconsistent with the other two cases. Move the execution of _DSW and _PSW into a separate function called acpi_device_sleep_wake() and call it wherever appropriate instead of executing _DSW and/or _PSW directly. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 81e4f08..2e959aa 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -292,69 +292,115 @@ static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev) return 0; } +/** + * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in + * ACPI 3.0) _PSW (Power State Wake) + * @dev: Device to handle. + * @enable: 0 - disable, 1 - enable the wake capabilities of the device. + * @sleep_state: Target sleep state of the system. + * @dev_state: Target power state of the device. + * + * Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power + * State Wake) for the device, if present. On failure reset the device's + * wakeup.flags.valid flag. + * + * RETURN VALUE: + * 0 if either _DSW or _PSW has been successfully executed + * 0 if neither _DSW nor _PSW has been found + * -ENODEV if the execution of either _DSW or _PSW has failed + */ +int acpi_device_sleep_wake(struct acpi_device *dev, + int enable, int sleep_state, int dev_state) +{ + union acpi_object in_arg[3]; + struct acpi_object_list arg_list = { 3, in_arg }; + acpi_status status = AE_OK; + + /* + * Try to execute _DSW first. + * + * Three agruments are needed for the _DSW object: + * Argument 0: enable/disable the wake capabilities + * Argument 1: target system state + * Argument 2: target device state + * When _DSW object is called to disable the wake capabilities, maybe + * the first argument is filled. The values of the other two agruments + * are meaningless. + */ + in_arg[0].type = ACPI_TYPE_INTEGER; + in_arg[0].integer.value = enable; + in_arg[1].type = ACPI_TYPE_INTEGER; + in_arg[1].integer.value = sleep_state; + in_arg[2].type = ACPI_TYPE_INTEGER; + in_arg[2].integer.value = dev_state; + status = acpi_evaluate_object(dev->handle, "_DSW", &arg_list, NULL); + if (ACPI_SUCCESS(status)) { + return 0; + } else if (status != AE_NOT_FOUND) { + printk(KERN_ERR PREFIX "_DSW execution failed\n"); + dev->wakeup.flags.valid = 0; + return -ENODEV; + } + + /* Execute _PSW */ + arg_list.count = 1; + in_arg[0].integer.value = enable; + status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL); + if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { + printk(KERN_ERR PREFIX "_PSW execution failed\n"); + dev->wakeup.flags.valid = 0; + return -ENODEV; + } + + return 0; +} + /* * Prepare a wakeup device, two steps (Ref ACPI 2.0:P229): * 1. Power on the power resources required for the wakeup device - * 2. Enable _PSW (power state wake) for the device if present + * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power + * State Wake) for the device, if present */ -int acpi_enable_wakeup_device_power(struct acpi_device *dev) +int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state) { - union acpi_object arg = { ACPI_TYPE_INTEGER }; - struct acpi_object_list arg_list = { 1, &arg }; - acpi_status status = AE_OK; int i; - int ret = 0; if (!dev || !dev->wakeup.flags.valid) - return -1; + return -EINVAL; - arg.integer.value = 1; /* Open power resource */ for (i = 0; i < dev->wakeup.resources.count; i++) { - ret = acpi_power_on(dev->wakeup.resources.handles[i], dev); + int ret = acpi_power_on(dev->wakeup.resources.handles[i], dev); if (ret) { printk(KERN_ERR PREFIX "Transition power state\n"); dev->wakeup.flags.valid = 0; - return -1; + return -ENODEV; } } - /* Execute PSW */ - status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL); - if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { - printk(KERN_ERR PREFIX "Evaluate _PSW\n"); - dev->wakeup.flags.valid = 0; - ret = -1; - } - - return ret; + /* + * Passing 3 as the third argument below means the device may be placed + * in arbitrary power state afterwards. + */ + return acpi_device_sleep_wake(dev, 1, sleep_state, 3); } /* * Shutdown a wakeup device, counterpart of above method - * 1. Disable _PSW (power state wake) + * 1. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power + * State Wake) for the device, if present * 2. Shutdown down the power resources */ int acpi_disable_wakeup_device_power(struct acpi_device *dev) { - union acpi_object arg = { ACPI_TYPE_INTEGER }; - struct acpi_object_list arg_list = { 1, &arg }; - acpi_status status = AE_OK; - int i; - int ret = 0; - + int i, ret; if (!dev || !dev->wakeup.flags.valid) - return -1; + return -EINVAL; - arg.integer.value = 0; - /* Execute PSW */ - status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL); - if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { - printk(KERN_ERR PREFIX "Evaluate _PSW\n"); - dev->wakeup.flags.valid = 0; - return -1; - } + ret = acpi_device_sleep_wake(dev, 0, 0, 0); + if (ret) + return ret; /* Close power resource */ for (i = 0; i < dev->wakeup.resources.count; i++) { @@ -362,7 +408,7 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev) if (ret) { printk(KERN_ERR PREFIX "Transition power state\n"); dev->wakeup.flags.valid = 0; - return -1; + return -ENODEV; } } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 6d85289..f276890 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -691,9 +691,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) acpi_status status = 0; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *package = NULL; - union acpi_object in_arg[3]; - struct acpi_object_list arg_list = { 3, in_arg }; - acpi_status psw_status = AE_OK; + int psw_error; struct acpi_device_id button_device_ids[] = { {"PNP0C0D", 0}, @@ -725,39 +723,11 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) * So it is necessary to call _DSW object first. Only when it is not * present will the _PSW object used. */ - /* - * Three agruments are needed for the _DSW object. - * Argument 0: enable/disable the wake capabilities - * When _DSW object is called to disable the wake capabilities, maybe - * the first argument is filled. The value of the other two agruments - * is meaningless. - */ - in_arg[0].type = ACPI_TYPE_INTEGER; - in_arg[0].integer.value = 0; - in_arg[1].type = ACPI_TYPE_INTEGER; - in_arg[1].integer.value = 0; - in_arg[2].type = ACPI_TYPE_INTEGER; - in_arg[2].integer.value = 0; - psw_status = acpi_evaluate_object(device->handle, "_DSW", - &arg_list, NULL); - if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND)) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in evaluate _DSW\n")); - /* - * When the _DSW object is not present, OSPM will call _PSW object. - */ - if (psw_status == AE_NOT_FOUND) { - /* - * Only one agruments is required for the _PSW object. - * agrument 0: enable/disable the wake capabilities - */ - arg_list.count = 1; - in_arg[0].integer.value = 0; - psw_status = acpi_evaluate_object(device->handle, "_PSW", - &arg_list, NULL); - if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND)) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in " - "evaluate _PSW\n")); - } + psw_error = acpi_device_sleep_wake(device, 0, 0, 0); + if (psw_error) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "error in _DSW or _PSW evaluation\n")); + /* Power button, Lid switch always enable wakeup */ if (!acpi_match_device_ids(device, button_device_ids)) device->wakeup.flags.run_wake = 1; diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index ed8e41b..7422a22 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -42,7 +42,7 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state) continue; spin_unlock(&acpi_device_lock); - acpi_enable_wakeup_device_power(dev); + acpi_enable_wakeup_device_power(dev, sleep_state); spin_lock(&acpi_device_lock); } spin_unlock(&acpi_device_lock); diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 9757a04..e5f38e5 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -87,7 +87,9 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain, -------------------------------------------------------------------------- */ #ifdef CONFIG_ACPI_POWER -int acpi_enable_wakeup_device_power(struct acpi_device *dev); +int acpi_device_sleep_wake(struct acpi_device *dev, + int enable, int sleep_state, int dev_state); +int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state); int acpi_disable_wakeup_device_power(struct acpi_device *dev); int acpi_power_get_inferred_state(struct acpi_device *device); int acpi_power_transition(struct acpi_device *device, int state); -- cgit v0.10.2 From 0af4b8c4fb31193dc666f4893107a18fef82baab Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:34:11 +0200 Subject: ACPI: Introduce new device wakeup flag 'prepared' Introduce additional flag 'prepared' in struct acpi_device_wakeup_flags and use it to prevent devices from being enable/disabled do wake up the system multiple times in a row (this does not happen currently, but will be possible after some of the following patches). Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 2e959aa..4ab21cb 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -363,11 +363,18 @@ int acpi_device_sleep_wake(struct acpi_device *dev, */ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state) { - int i; + int i, err; if (!dev || !dev->wakeup.flags.valid) return -EINVAL; + /* + * Do not execute the code below twice in a row without calling + * acpi_disable_wakeup_device_power() in between for the same device + */ + if (dev->wakeup.flags.prepared) + return 0; + /* Open power resource */ for (i = 0; i < dev->wakeup.resources.count; i++) { int ret = acpi_power_on(dev->wakeup.resources.handles[i], dev); @@ -382,7 +389,11 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state) * Passing 3 as the third argument below means the device may be placed * in arbitrary power state afterwards. */ - return acpi_device_sleep_wake(dev, 1, sleep_state, 3); + err = acpi_device_sleep_wake(dev, 1, sleep_state, 3); + if (!err) + dev->wakeup.flags.prepared = 1; + + return err; } /* @@ -398,6 +409,15 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev) if (!dev || !dev->wakeup.flags.valid) return -EINVAL; + /* + * Do not execute the code below twice in a row without calling + * acpi_enable_wakeup_device_power() in between for the same device + */ + if (!dev->wakeup.flags.prepared) + return 0; + + dev->wakeup.flags.prepared = 0; + ret = acpi_device_sleep_wake(dev, 0, 0, 0); if (ret) return ret; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 0c21ea3..071daf8 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -259,6 +259,7 @@ struct acpi_device_perf { /* Wakeup Management */ struct acpi_device_wakeup_flags { u8 valid:1; /* Can successfully enable wakeup? */ + u8 prepared:1; /* Has the wake-up capability been enabled? */ u8 run_wake:1; /* Run-Wake GPE devices */ }; -- cgit v0.10.2 From eb9d0fe40e313c0a74115ef456a2e43a6c8da72f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:34:48 +0200 Subject: PCI ACPI: Rework PCI handling of wake-up * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index b9b69d9..fc1110d 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -306,6 +306,17 @@ bool acpi_bus_power_manageable(acpi_handle handle) EXPORT_SYMBOL(acpi_bus_power_manageable); +bool acpi_bus_can_wakeup(acpi_handle handle) +{ + struct acpi_device *device; + int result; + + result = acpi_bus_get_device(handle, &device); + return result ? false : device->wakeup.flags.valid; +} + +EXPORT_SYMBOL(acpi_bus_can_wakeup); + /* -------------------------------------------------------------------------- Event Management -------------------------------------------------------------------------- */ diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 06f8634..87c5d45 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -166,6 +166,8 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) "firmware_node"); ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, "physical_node"); + if (acpi_dev->wakeup.flags.valid) + device_set_wakeup_capable(dev, true); } return 0; diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 4addf8a..af7f466 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -468,6 +468,31 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) *d_min_p = d_min; return d_max; } + +/** + * acpi_pm_device_sleep_wake - enable or disable the system wake-up + * capability of given device + * @dev: device to handle + * @enable: 'true' - enable, 'false' - disable the wake-up capability + */ +int acpi_pm_device_sleep_wake(struct device *dev, bool enable) +{ + acpi_handle handle; + struct acpi_device *adev; + + if (!device_may_wakeup(dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + printk(KERN_DEBUG "ACPI handle has no context!\n"); + return -ENODEV; + } + + return enable ? + acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) : + acpi_disable_wakeup_device_power(adev); +} #endif static void acpi_power_off_prepare(void) diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index 7422a22..38655eb 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -66,13 +66,15 @@ void acpi_enable_wakeup_device(u8 sleep_state) list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); + if (!dev->wakeup.flags.valid) continue; + /* If users want to disable run-wake GPE, * we only disable it for wake and leave it for runtime */ - if (!dev->wakeup.state.enabled || - sleep_state > (u32) dev->wakeup.sleep_state) { + if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) + || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { spin_unlock(&acpi_device_lock); /* set_gpe_type will disable GPE, leave it like that */ @@ -110,8 +112,9 @@ void acpi_disable_wakeup_device(u8 sleep_state) if (!dev->wakeup.flags.valid) continue; - if (!dev->wakeup.state.enabled || - sleep_state > (u32) dev->wakeup.sleep_state) { + + if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) + || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { spin_unlock(&acpi_device_lock); acpi_set_gpe_type(dev->wakeup.gpe_device, diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index d11f74b..596aeec 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -6,9 +6,6 @@ #include #include "power.h" -int (*platform_enable_wakeup)(struct device *dev, int is_on); - - /* * wakeup - Report/change current wakeup option for device * diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 6bc0d8c..7764768b 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -299,10 +299,30 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) return error; } +static bool acpi_pci_can_wakeup(struct pci_dev *dev) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); + + return handle ? acpi_bus_can_wakeup(handle) : false; +} + +static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) +{ + int error = acpi_pm_device_sleep_wake(&dev->dev, enable); + + if (!error) + dev_printk(KERN_INFO, &dev->dev, + "wake-up capability %s by ACPI\n", + enable ? "enabled" : "disabled"); + return error; +} + static struct pci_platform_pm_ops acpi_pci_platform_pm = { .is_manageable = acpi_pci_power_manageable, .set_state = acpi_pci_set_power_state, .choose_state = acpi_pci_choose_state, + .can_wakeup = acpi_pci_can_wakeup, + .sleep_wake = acpi_pci_sleep_wake, }; /* ACPI bus type */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 20e2807..a6b1b6f 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -380,7 +380,8 @@ static struct pci_platform_pm_ops *pci_platform_pm; int pci_set_platform_pm(struct pci_platform_pm_ops *ops) { - if (!ops->is_manageable || !ops->set_state || !ops->choose_state) + if (!ops->is_manageable || !ops->set_state || !ops->choose_state + || !ops->sleep_wake || !ops->can_wakeup) return -EINVAL; pci_platform_pm = ops; return 0; @@ -403,6 +404,17 @@ static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR; } +static inline bool platform_pci_can_wakeup(struct pci_dev *dev) +{ + return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false; +} + +static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) +{ + return pci_platform_pm ? + pci_platform_pm->sleep_wake(dev, enable) : -ENODEV; +} + /** * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device @@ -1036,6 +1048,56 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) } /** + * pci_pme_capable - check the capability of PCI device to generate PME# + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + * @state: PCI state from which device will issue PME#. + */ +static bool pci_pme_capable(struct pci_dev *dev, int pm, pci_power_t state) +{ + u16 pmc; + + if (!pm) + return false; + + /* Check device's ability to generate PME# from given state */ + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); + + pmc &= PCI_PM_CAP_PME_MASK; + pmc >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */ + + return !!(pmc & (1 << state)); +} + +/** + * pci_pme_active - enable or disable PCI device's PME# function + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + * @enable: 'true' to enable PME# generation; 'false' to disable it. + * + * The caller must verify that the device is capable of generating PME# before + * calling this function with @enable equal to 'true'. + */ +static void pci_pme_active(struct pci_dev *dev, int pm, bool enable) +{ + u16 pmcsr; + + if (!pm) + return; + + pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + /* Clear PME_Status by writing 1 to it and enable PME# */ + pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE; + if (!enable) + pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; + + pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); + + dev_printk(KERN_INFO, &dev->dev, "PME# %s\n", + enable ? "enabled" : "disabled"); +} + +/** * pci_enable_wake - enable PCI device as wakeup event source * @dev: PCI device affected * @state: PCI state from which device will issue wakeup events @@ -1046,66 +1108,83 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) * called automatically by this routine. * * Devices with legacy power management (no standard PCI PM capabilities) - * always require such platform hooks. Depending on the platform, devices - * supporting the standard PCI PME# signal may require such platform hooks; - * they always update bits in config space to allow PME# generation. + * always require such platform hooks. * - * -EIO is returned if the device can't ever be a wakeup event source. - * -EINVAL is returned if the device can't generate wakeup events from - * the specified PCI state. Returns zero if the operation is successful. + * RETURN VALUE: + * 0 is returned on success + * -EINVAL is returned if device is not supposed to wake up the system + * Error code depending on the platform is returned if both the platform and + * the native mechanism fail to enable the generation of wake-up events */ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { int pm; - int status; - u16 value; - - /* Note that drivers should verify device_may_wakeup(&dev->dev) - * before calling this function. Platform code should report - * errors when drivers try to enable wakeup on devices that - * can't issue wakeups, or on which wakeups were disabled by - * userspace updating the /sys/devices.../power/wakeup file. - */ + int error = 0; + bool pme_done = false; - status = call_platform_enable_wakeup(&dev->dev, enable); - - /* find PCI PM capability in list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); + if (!device_may_wakeup(&dev->dev)) + return -EINVAL; - /* If device doesn't support PM Capabilities, but caller wants to - * disable wake events, it's a NOP. Otherwise fail unless the - * platform hooks handled this legacy device already. + /* + * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don + * Anderson we should be doing PME# wake enable followed by ACPI wake + * enable. To disable wake-up we call the platform first, for symmetry. */ - if (!pm) - return enable ? status : 0; - /* Check device's ability to generate PME# */ - pci_read_config_word(dev,pm+PCI_PM_PMC,&value); + if (!enable && platform_pci_can_wakeup(dev)) + error = platform_pci_sleep_wake(dev, false); - value &= PCI_PM_CAP_PME_MASK; - value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */ - - /* Check if it can generate PME# from requested state. */ - if (!value || !(value & (1 << state))) { - /* if it can't, revert what the platform hook changed, - * always reporting the base "EINVAL, can't PME#" error - */ - if (enable) - call_platform_enable_wakeup(&dev->dev, 0); - return enable ? -EINVAL : 0; + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + if (!enable || pci_pme_capable(dev, pm, state)) { + pci_pme_active(dev, pm, enable); + pme_done = true; } - pci_read_config_word(dev, pm + PCI_PM_CTRL, &value); + if (enable && platform_pci_can_wakeup(dev)) + error = platform_pci_sleep_wake(dev, true); - /* Clear PME_Status by writing 1 to it and enable PME# */ - value |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE; + return pme_done ? 0 : error; +} - if (!enable) - value &= ~PCI_PM_CTRL_PME_ENABLE; +/** + * pci_pm_init - Initialize PM functions of given PCI device + * @dev: PCI device to handle. + */ +void pci_pm_init(struct pci_dev *dev) +{ + int pm; + u16 pmc; - pci_write_config_word(dev, pm + PCI_PM_CTRL, value); + /* find PCI PM capability in list */ + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + if (!pm) + return; + /* Check device's ability to generate PME# */ + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - return 0; + if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { + dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", + pmc & PCI_PM_CAP_VER_MASK); + return; + } + + if (pmc & PCI_PM_CAP_PME_MASK) { + dev_printk(KERN_INFO, &dev->dev, + "PME# supported from%s%s%s%s%s\n", + (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "", + (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "", + (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "", + (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "", + (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : ""); + /* + * Make device's PM flags reflect the wake-up capability, but + * let the user space enable it to wake up the system as needed. + */ + device_set_wakeup_capable(&dev->dev, true); + device_set_wakeup_enable(&dev->dev, false); + /* Disable the PME# generation functionality */ + pci_pme_active(dev, pm, false); + } } int diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 0cd2e71..b08dfc9 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -17,6 +17,11 @@ extern void pci_cleanup_rom(struct pci_dev *dev); * platform; to be used during system-wide transitions from a * sleeping state to the working state and vice versa * + * @can_wakeup - returns 'true' if given device is capable of waking up the + * system from a sleeping state + * + * @sleep_wake - enables/disables the system wake up capability of given device + * * If given platform is generally capable of power managing PCI devices, all of * these callbacks are mandatory. */ @@ -24,9 +29,12 @@ struct pci_platform_pm_ops { bool (*is_manageable)(struct pci_dev *dev); int (*set_state)(struct pci_dev *dev, pci_power_t state); pci_power_t (*choose_state)(struct pci_dev *dev); + bool (*can_wakeup)(struct pci_dev *dev); + int (*sleep_wake)(struct pci_dev *dev, bool enable); }; extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); +extern void pci_pm_init(struct pci_dev *dev); extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 2f0ae70..b1724cf 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -860,49 +860,6 @@ int pci_cfg_space_size_ext(struct pci_dev *dev) return PCI_CFG_SPACE_SIZE; } -/** - * pci_disable_pme - Disable the PME function of PCI device - * @dev: PCI device affected - * -EINVAL is returned if PCI device doesn't support PME. - * Zero is returned if the PME is supported and can be disabled. - */ -static int pci_disable_pme(struct pci_dev *dev) -{ - int pm; - u16 value; - - /* find PCI PM capability in list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - - /* If device doesn't support PM Capabilities, it means that PME is - * not supported. - */ - if (!pm) - return -EINVAL; - /* Check device's ability to generate PME# */ - pci_read_config_word(dev, pm + PCI_PM_PMC, &value); - - value &= PCI_PM_CAP_PME_MASK; - /* Check if it can generate PME# */ - if (!value) { - /* - * If it is zero, it means that PME is still unsupported - * although there exists the PM capability. - */ - return -EINVAL; - } - - pci_read_config_word(dev, pm + PCI_PM_CTRL, &value); - - /* Clear PME_Status by writing 1 to it */ - value |= PCI_PM_CTRL_PME_STATUS ; - /* Disable PME enable bit */ - value &= ~PCI_PM_CTRL_PME_ENABLE; - pci_write_config_word(dev, pm + PCI_PM_CTRL, value); - - return 0; -} - int pci_cfg_space_size(struct pci_dev *dev) { int pos; @@ -1010,7 +967,6 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) } pci_vpd_pci22_init(dev); - pci_disable_pme(dev); return dev; } @@ -1031,6 +987,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) /* Fix up broken headers */ pci_fixup_device(pci_fixup_header, dev); + /* Initialize power management of the device */ + pci_pm_init(dev); + /* * Add the device to our list of discovered devices * and the bus list for fixup functions, etc. diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 071daf8..7ab5a61 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -337,6 +337,7 @@ int acpi_bus_get_status(struct acpi_device *device); int acpi_bus_get_power(acpi_handle handle, int *state); int acpi_bus_set_power(acpi_handle handle, int state); bool acpi_bus_power_manageable(acpi_handle handle); +bool acpi_bus_can_wakeup(acpi_handle handle); #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data); @@ -379,6 +380,7 @@ acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); #ifdef CONFIG_PM_SLEEP int acpi_pm_device_sleep_state(struct device *, int *); +int acpi_pm_device_sleep_wake(struct device *, bool); #else /* !CONFIG_PM_SLEEP */ static inline int acpi_pm_device_sleep_state(struct device *d, int *p) { diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index f0d0b2c..3af0c8d 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -35,6 +35,11 @@ static inline void device_init_wakeup(struct device *dev, int val) dev->power.can_wakeup = dev->power.should_wakeup = !!val; } +static inline void device_set_wakeup_capable(struct device *dev, int val) +{ + dev->power.can_wakeup = !!val; +} + static inline int device_can_wakeup(struct device *dev) { return dev->power.can_wakeup; @@ -47,21 +52,7 @@ static inline void device_set_wakeup_enable(struct device *dev, int val) static inline int device_may_wakeup(struct device *dev) { - return dev->power.can_wakeup & dev->power.should_wakeup; -} - -/* - * Platform hook to activate device wakeup capability, if that's not already - * handled by enable_irq_wake() etc. - * Returns zero on success, else negative errno - */ -extern int (*platform_enable_wakeup)(struct device *dev, int is_on); - -static inline int call_platform_enable_wakeup(struct device *dev, int is_on) -{ - if (platform_enable_wakeup) - return (*platform_enable_wakeup)(dev, is_on); - return 0; + return dev->power.can_wakeup && dev->power.should_wakeup; } #else /* !CONFIG_PM */ @@ -80,11 +71,6 @@ static inline int device_can_wakeup(struct device *dev) #define device_set_wakeup_enable(dev, val) do {} while (0) #define device_may_wakeup(dev) 0 -static inline int call_platform_enable_wakeup(struct device *dev, int is_on) -{ - return 0; -} - #endif /* !CONFIG_PM */ #endif /* _LINUX_PM_WAKEUP_H */ -- cgit v0.10.2 From 404cc2d8ce41ed4031958fba8e633767e8a2e028 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:35:26 +0200 Subject: PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep Introduce functions pci_prepare_to_sleep() and pci_back_from_sleep(), to be used by the PCI drivers that want to place their devices into the lowest power state appropiate for them (PCI_D3hot, if the device is not supposed to wake up the system, or the deepest state from which the wake-up is possible, otherwise) while the system is being prepared to go into a sleeping state and to put them back into D0 during the subsequent transition to the working state. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a6b1b6f..1b0ec45 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1147,6 +1147,87 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) } /** + * pci_prepare_to_sleep - prepare PCI device for system-wide transition into + * a sleep state + * @dev: Device to handle. + * + * Choose the power state appropriate for the device depending on whether + * it can wake up the system and/or is power manageable by the platform + * (PCI_D3hot is the default) and put the device into that state. + */ +int pci_prepare_to_sleep(struct pci_dev *dev) +{ + pci_power_t target_state = PCI_D3hot; + int pm = pci_find_capability(dev, PCI_CAP_ID_PM); + int error; + + if (platform_pci_power_manageable(dev)) { + /* + * Call the platform to choose the target state of the device + * and enable wake-up from this state if supported. + */ + pci_power_t state = platform_pci_choose_state(dev); + + switch (state) { + case PCI_POWER_ERROR: + case PCI_UNKNOWN: + break; + case PCI_D1: + case PCI_D2: + if (pci_no_d1d2(dev)) + break; + default: + target_state = state; + pci_enable_wake(dev, target_state, true); + } + } else if (device_may_wakeup(&dev->dev)) { + /* + * Find the deepest state from which the device can generate + * wake-up events, make it the target state and enable device + * to generate PME#. + */ + u16 pmc; + + if (!pm) + return -EIO; + + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); + if (pmc & PCI_PM_CAP_PME_MASK) { + if (!(pmc & PCI_PM_CAP_PME_D3)) { + /* Device cannot generate PME# from D3_hot */ + if (pmc & PCI_PM_CAP_PME_D2) + target_state = PCI_D2; + else if (pmc & PCI_PM_CAP_PME_D1) + target_state = PCI_D1; + else + target_state = PCI_D0; + } + pci_pme_active(dev, pm, true); + } + } + + error = pci_set_power_state(dev, target_state); + + if (error) + pci_enable_wake(dev, target_state, false); + + return error; +} + +/** + * pci_back_from_sleep - turn PCI device on during system-wide transition into + * the working state a sleep state + * @dev: Device to handle. + * + * Disable device's sytem wake-up capability and put it into D0. + */ +int pci_back_from_sleep(struct pci_dev *dev) +{ + pci_enable_wake(dev, PCI_D0, false); + return pci_set_power_state(dev, PCI_D0); +} + +/** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. */ @@ -1853,5 +1934,7 @@ EXPORT_SYMBOL(pci_set_power_state); EXPORT_SYMBOL(pci_save_state); EXPORT_SYMBOL(pci_restore_state); EXPORT_SYMBOL(pci_enable_wake); +EXPORT_SYMBOL(pci_prepare_to_sleep); +EXPORT_SYMBOL(pci_back_from_sleep); EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state); diff --git a/include/linux/pci.h b/include/linux/pci.h index 4c80dc3..52ac06d 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -632,6 +632,8 @@ int pci_restore_state(struct pci_dev *dev); int pci_set_power_state(struct pci_dev *dev, pci_power_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable); +int pci_prepare_to_sleep(struct pci_dev *dev); +int pci_back_from_sleep(struct pci_dev *dev); /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); -- cgit v0.10.2 From 337001b6c42938f49a880b1b8306c3ed771a7e61 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:36:24 +0200 Subject: PCI: Simplify PCI device PM code If the offset of PCI device's PM capability in its configuration space, the mask of states that the device supports PME# from and the D1 and D2 support bits are cached in the corresponding struct pci_dev, the PCI device PM code can be simplified quite a bit. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1b0ec45..e632a58 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -419,7 +419,6 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. * * RETURN VALUE: @@ -430,12 +429,12 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * 0 if device's power state has been successfully changed. */ static int -pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) +pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) { - u16 pmcsr, pmc; + u16 pmcsr; bool need_restore = false; - if (!pm) + if (!dev->pm_cap) return -EIO; if (state < PCI_D0 || state > PCI_D3hot) @@ -455,20 +454,12 @@ pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) return -EINVAL; } - pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - - if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { - dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", - pmc & PCI_PM_CAP_VER_MASK); - return -EIO; - } - /* check if this device supports the desired state */ - if ((state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) - || (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))) + if ((state == PCI_D1 && !dev->d1_support) + || (state == PCI_D2 && !dev->d2_support)) return -EIO; - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); /* If we're (effectively) in D3, force entire word to 0. * This doesn't affect PME_Status, disables PME_En, and @@ -492,7 +483,7 @@ pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) } /* enter specified state */ - pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ @@ -528,14 +519,13 @@ pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) * pci_update_current_state - Read PCI power state of given device from its * PCI PM registers and cache it * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. */ -static void pci_update_current_state(struct pci_dev *dev, int pm) +static void pci_update_current_state(struct pci_dev *dev) { - if (pm) { + if (dev->pm_cap) { u16 pmcsr; - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); } } @@ -557,7 +547,7 @@ static void pci_update_current_state(struct pci_dev *dev, int pm) */ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { - int pm, error; + int error; /* bound the state we're entering */ if (state > PCI_D3hot) @@ -572,9 +562,6 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ return 0; - /* Find PCI PM capability in the list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - if (state == PCI_D0 && platform_pci_power_manageable(dev)) { /* * Allow the platform to change the state, for example via ACPI @@ -582,16 +569,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ int ret = platform_pci_set_power_state(dev, PCI_D0); if (!ret) - pci_update_current_state(dev, pm); + pci_update_current_state(dev); } - error = pci_raw_set_power_state(dev, pm, state); + error = pci_raw_set_power_state(dev, state); if (state > PCI_D0 && platform_pci_power_manageable(dev)) { /* Allow the platform to finalize the transition */ int ret = platform_pci_set_power_state(dev, state); if (!ret) { - pci_update_current_state(dev, pm); + pci_update_current_state(dev); error = 0; } } @@ -1050,48 +1037,38 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) /** * pci_pme_capable - check the capability of PCI device to generate PME# * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. * @state: PCI state from which device will issue PME#. */ -static bool pci_pme_capable(struct pci_dev *dev, int pm, pci_power_t state) +static bool pci_pme_capable(struct pci_dev *dev, pci_power_t state) { - u16 pmc; - - if (!pm) + if (!dev->pm_cap) return false; - /* Check device's ability to generate PME# from given state */ - pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - - pmc &= PCI_PM_CAP_PME_MASK; - pmc >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */ - - return !!(pmc & (1 << state)); + return !!(dev->pme_support & (1 << state)); } /** * pci_pme_active - enable or disable PCI device's PME# function * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. * @enable: 'true' to enable PME# generation; 'false' to disable it. * * The caller must verify that the device is capable of generating PME# before * calling this function with @enable equal to 'true'. */ -static void pci_pme_active(struct pci_dev *dev, int pm, bool enable) +static void pci_pme_active(struct pci_dev *dev, bool enable) { u16 pmcsr; - if (!pm) + if (!dev->pm_cap) return; - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); /* Clear PME_Status by writing 1 to it and enable PME# */ pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE; if (!enable) pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; - pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); dev_printk(KERN_INFO, &dev->dev, "PME# %s\n", enable ? "enabled" : "disabled"); @@ -1118,7 +1095,6 @@ static void pci_pme_active(struct pci_dev *dev, int pm, bool enable) */ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { - int pm; int error = 0; bool pme_done = false; @@ -1134,9 +1110,8 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) if (!enable && platform_pci_can_wakeup(dev)) error = platform_pci_sleep_wake(dev, false); - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - if (!enable || pci_pme_capable(dev, pm, state)) { - pci_pme_active(dev, pm, enable); + if (!enable || pci_pme_capable(dev, state)) { + pci_pme_active(dev, enable); pme_done = true; } @@ -1158,7 +1133,6 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) int pci_prepare_to_sleep(struct pci_dev *dev) { pci_power_t target_state = PCI_D3hot; - int pm = pci_find_capability(dev, PCI_CAP_ID_PM); int error; if (platform_pci_power_manageable(dev)) { @@ -1186,23 +1160,14 @@ int pci_prepare_to_sleep(struct pci_dev *dev) * wake-up events, make it the target state and enable device * to generate PME#. */ - u16 pmc; - - if (!pm) + if (!dev->pm_cap) return -EIO; - pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - if (pmc & PCI_PM_CAP_PME_MASK) { - if (!(pmc & PCI_PM_CAP_PME_D3)) { - /* Device cannot generate PME# from D3_hot */ - if (pmc & PCI_PM_CAP_PME_D2) - target_state = PCI_D2; - else if (pmc & PCI_PM_CAP_PME_D1) - target_state = PCI_D1; - else - target_state = PCI_D0; - } - pci_pme_active(dev, pm, true); + if (dev->pme_support) { + while (target_state + && !(dev->pme_support & (1 << target_state))) + target_state--; + pci_pme_active(dev, true); } } @@ -1236,6 +1201,8 @@ void pci_pm_init(struct pci_dev *dev) int pm; u16 pmc; + dev->pm_cap = 0; + /* find PCI PM capability in list */ pm = pci_find_capability(dev, PCI_CAP_ID_PM); if (!pm) @@ -1249,7 +1216,23 @@ void pci_pm_init(struct pci_dev *dev) return; } - if (pmc & PCI_PM_CAP_PME_MASK) { + dev->pm_cap = pm; + + dev->d1_support = false; + dev->d2_support = false; + if (!pci_no_d1d2(dev)) { + if (pmc & PCI_PM_CAP_D1) { + dev_printk(KERN_DEBUG, &dev->dev, "supports D1\n"); + dev->d1_support = true; + } + if (pmc & PCI_PM_CAP_D2) { + dev_printk(KERN_DEBUG, &dev->dev, "supports D2\n"); + dev->d2_support = true; + } + } + + pmc &= PCI_PM_CAP_PME_MASK; + if (pmc) { dev_printk(KERN_INFO, &dev->dev, "PME# supported from%s%s%s%s%s\n", (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "", @@ -1257,6 +1240,7 @@ void pci_pm_init(struct pci_dev *dev) (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "", (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "", (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : ""); + dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT; /* * Make device's PM flags reflect the wake-up capability, but * let the user space enable it to wake up the system as needed. @@ -1264,7 +1248,9 @@ void pci_pm_init(struct pci_dev *dev) device_set_wakeup_capable(&dev->dev, true); device_set_wakeup_enable(&dev->dev, false); /* Disable the PME# generation functionality */ - pci_pme_active(dev, pm, false); + pci_pme_active(dev, false); + } else { + dev->pme_support = 0; } } diff --git a/include/linux/pci.h b/include/linux/pci.h index 52ac06d..68a29f0 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -177,6 +177,13 @@ struct pci_dev { pci_power_t current_state; /* Current operating state. In ACPI-speak, this is D0-D3, D0 being fully functional, and D3 being off. */ + int pm_cap; /* PM capability offset in the + configuration space */ + unsigned int pme_support:5; /* Bitmask of states from which PME# + can be generated */ + unsigned int d1_support:1; /* Low power state D1 is supported */ + unsigned int d2_support:1; /* Low power state D2 is supported */ + unsigned int no_d1d2:1; /* Only allow D0 and D3 */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ @@ -201,7 +208,6 @@ struct pci_dev { unsigned int is_added:1; unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ - unsigned int no_d1d2:1; /* only allow d0 or d3 */ unsigned int block_ucfg_access:1; /* userspace config space access is blocked */ unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index c0c1223..19958b9 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -231,6 +231,7 @@ #define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ #define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ #define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ +#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ #define PCI_PM_CTRL 4 /* PM control and status register */ #define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ #define PCI_PM_CTRL_NO_SOFT_RESET 0x0004 /* No reset for D3hot->D0 */ -- cgit v0.10.2 From f7a1b86095bf7fd1578ef54067545b9cb7084713 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 8 Jul 2008 15:00:54 +0100 Subject: Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n So that one of the several config option permutations will build again. Tested-by: Alexander Beregalov Signed-off-by: David Howells Signed-off-by: Jesse Barnes diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 7ab5a61..a5ac0bc 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -388,6 +388,10 @@ static inline int acpi_pm_device_sleep_state(struct device *d, int *p) *p = ACPI_STATE_D0; return ACPI_STATE_D3; } +static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable) +{ + return -ENODEV; +} #endif /* !CONFIG_PM_SLEEP */ #endif /* CONFIG_ACPI */ -- cgit v0.10.2 From beef3129b3afb74817acff72fda4a9d951e3973e Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 11 Jul 2008 15:21:17 -0600 Subject: x86/PCI: Fix PCI config space for domains > 0 John Keller reports that PCI config space access is broken on machines with more than one domain. conf1 accesses only work for domain 0, so make sure we check the domain number in the raw routines before trying conf1. Reported-by: John Keller Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index d19fd07..86aff81 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -32,7 +32,7 @@ struct pci_raw_ops *raw_pci_ext_ops; int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, int reg, int len, u32 *val) { - if (reg < 256 && raw_pci_ops) + if (domain == 0 && reg < 256 && raw_pci_ops) return raw_pci_ops->read(domain, bus, devfn, reg, len, val); if (raw_pci_ext_ops) return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val); @@ -42,7 +42,7 @@ int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn, int reg, int len, u32 val) { - if (reg < 256 && raw_pci_ops) + if (domain == 0 && reg < 256 && raw_pci_ops) return raw_pci_ops->write(domain, bus, devfn, reg, len, val); if (raw_pci_ext_ops) return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val); -- cgit v0.10.2 From c157dfa3e4aea5775389f2f4d53c040bc8813af1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 13 Jul 2008 22:45:06 +0200 Subject: PCI PM: Fix pci_prepare_to_sleep The recently introduced pci_prepare_to_sleep() needs the following fix, because there are systems which are not power manageable by ACPI (ie. ACPI doesn't provide methods to put the device into low power states and back), but require ACPI hooks to be executed for wake-up to work. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e632a58..ace5181 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1152,7 +1152,6 @@ int pci_prepare_to_sleep(struct pci_dev *dev) break; default: target_state = state; - pci_enable_wake(dev, target_state, true); } } else if (device_may_wakeup(&dev->dev)) { /* @@ -1167,10 +1166,11 @@ int pci_prepare_to_sleep(struct pci_dev *dev) while (target_state && !(dev->pme_support & (1 << target_state))) target_state--; - pci_pme_active(dev, true); } } + pci_enable_wake(dev, target_state, true); + error = pci_set_power_state(dev, target_state); if (error) -- cgit v0.10.2 From c300bd2fb583afb6d68804afd38bc90b31310d95 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 10 Jul 2008 02:16:44 +0200 Subject: PCI: include linux/pm_wakeup.h for device_set_wakeup_capable drivers/pci/pci.c needs pm_wakeup.h since it uses device_set_wakup_capable(). The latter also needs to be stubbed out for !CONFIG_PM. Signed-off-by: Stephen Rothwell Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ace5181..44a46c9 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -17,6 +17,7 @@ #include #include #include +#include #include /* isa_dma_bridge_buggy */ #include "pci.h" diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index 3af0c8d..0aae777 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -63,6 +63,8 @@ static inline void device_init_wakeup(struct device *dev, int val) dev->power.can_wakeup = !!val; } +static inline void device_set_wakeup_capable(struct device *dev, int val) { } + static inline int device_can_wakeup(struct device *dev) { return dev->power.can_wakeup; -- cgit v0.10.2 From 809d9a8f93bd8504dcc34b16bbfdfd1a8c9bb1ed Mon Sep 17 00:00:00 2001 From: Alok Kataria Date: Tue, 15 Jul 2008 11:59:42 -0700 Subject: x86/PCI: ACPI based PCI gap calculation Using ACPI to find free address space allows us to find a gap for the unallocated PCI resources or MMIO resources for hotplug devices within the BIOS allowed PCI regions. It works by evaluating the _CRS object under PCI0 looking for producer resources. Then searches the e820 memory space for a gap within these producer resources. Signed-off-by: Alok N Kataria Cc: Andi Kleen Cc: Len Brown Cc: Ingo Molnar Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index d95de2f..d1ffb57 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -4,6 +4,7 @@ #include #include #include +#include #include "pci.h" struct pci_root_info { @@ -14,6 +15,11 @@ struct pci_root_info { int busnum; }; +struct gap_info { + unsigned long gapstart; + unsigned long gapsize; +}; + static acpi_status resource_to_addr(struct acpi_resource *resource, struct acpi_resource_address64 *addr) @@ -110,6 +116,78 @@ adjust_transparent_bridge_resources(struct pci_bus *bus) } } +static acpi_status search_gap(struct acpi_resource *resource, void *data) +{ + struct acpi_resource_address64 addr; + acpi_status status; + struct gap_info *gap = data; + unsigned long long start_addr, end_addr; + + status = resource_to_addr(resource, &addr); + if (ACPI_SUCCESS(status) && + addr.resource_type == ACPI_MEMORY_RANGE && + addr.address_length > gap->gapsize) { + start_addr = addr.minimum + addr.translation_offset; + /* + * We want space only in the 32bit address range + */ + if (start_addr < UINT_MAX) { + end_addr = start_addr + addr.address_length; + e820_search_gap(&gap->gapstart, &gap->gapsize, + start_addr, end_addr); + } + } + + return AE_OK; +} + +/* + * Search for a hole in the 32 bit address space for PCI to assign MMIO + * resources, for hotplug or unconfigured resources. + * We query the CRS object of the PCI root device to look for possible producer + * resources in the tree and consider these while calulating the start address + * for this hole. + */ +static void pci_setup_gap(acpi_handle *handle) +{ + struct gap_info gap; + acpi_status status; + + gap.gapstart = 0; + gap.gapsize = 0x400000; + + status = acpi_walk_resources(handle, METHOD_NAME__CRS, + search_gap, &gap); + + if (ACPI_SUCCESS(status)) { + unsigned long round; + + if (!gap.gapstart) { + printk(KERN_ERR "ACPI: Warning: Cannot find a gap " + "in the 32bit address range for PCI\n" + "ACPI: PCI devices may collide with " + "hotpluggable memory address range\n"); + } + /* + * Round the gapstart, uses the same logic as in + * e820_gap_setup + */ + round = 0x100000; + while ((gap.gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gap.gapstart + round) & -round; + + printk(KERN_INFO "ACPI: PCI resources should " + "start at %lx (gap: %lx:%lx)\n", + pci_mem_start, gap.gapstart, gap.gapsize); + } else { + printk(KERN_ERR "ACPI: Error while searching for gap in " + "the 32bit address range for PCI\n"); + } +} + + static void get_current_resources(struct acpi_device *device, int busnum, int domain, struct pci_bus *bus) @@ -215,6 +293,8 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (bus && (pci_probe & PCI_USE__CRS)) get_current_resources(device, busnum, domain, bus); + + pci_setup_gap(device->handle); return bus; } -- cgit v0.10.2 From 9fce1bc956c21dfe0f46be028f18c4d5057f2bd7 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 16 Jul 2008 22:54:30 +0800 Subject: PCI: remove unnecessary volatile in PCIe hotplug struct controller Proper memory barriers have been added to order accesses to ->cmd_busy, so volatile declaration for cmd_busy can be removed. Signed-off-by: Ming Lei Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index d17233a..e3a1e7e 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -97,7 +97,7 @@ struct controller { u32 slot_cap; u8 cap_base; struct timer_list poll_timer; - volatile int cmd_busy; + int cmd_busy; unsigned int no_cmd_complete:1; }; -- cgit v0.10.2 From 58b6e5538460be358fdf1286d9a2fbcfcc2cfaba Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 16 Jul 2008 16:21:47 -0700 Subject: Revert "x86/PCI: ACPI based PCI gap calculation" This reverts commit 809d9a8f93bd8504dcc34b16bbfdfd1a8c9bb1ed. This one isn't quite ready for prime time. It needs more testing and additional feedback from the ACPI guys. diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index d1ffb57..d95de2f 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -4,7 +4,6 @@ #include #include #include -#include #include "pci.h" struct pci_root_info { @@ -15,11 +14,6 @@ struct pci_root_info { int busnum; }; -struct gap_info { - unsigned long gapstart; - unsigned long gapsize; -}; - static acpi_status resource_to_addr(struct acpi_resource *resource, struct acpi_resource_address64 *addr) @@ -116,78 +110,6 @@ adjust_transparent_bridge_resources(struct pci_bus *bus) } } -static acpi_status search_gap(struct acpi_resource *resource, void *data) -{ - struct acpi_resource_address64 addr; - acpi_status status; - struct gap_info *gap = data; - unsigned long long start_addr, end_addr; - - status = resource_to_addr(resource, &addr); - if (ACPI_SUCCESS(status) && - addr.resource_type == ACPI_MEMORY_RANGE && - addr.address_length > gap->gapsize) { - start_addr = addr.minimum + addr.translation_offset; - /* - * We want space only in the 32bit address range - */ - if (start_addr < UINT_MAX) { - end_addr = start_addr + addr.address_length; - e820_search_gap(&gap->gapstart, &gap->gapsize, - start_addr, end_addr); - } - } - - return AE_OK; -} - -/* - * Search for a hole in the 32 bit address space for PCI to assign MMIO - * resources, for hotplug or unconfigured resources. - * We query the CRS object of the PCI root device to look for possible producer - * resources in the tree and consider these while calulating the start address - * for this hole. - */ -static void pci_setup_gap(acpi_handle *handle) -{ - struct gap_info gap; - acpi_status status; - - gap.gapstart = 0; - gap.gapsize = 0x400000; - - status = acpi_walk_resources(handle, METHOD_NAME__CRS, - search_gap, &gap); - - if (ACPI_SUCCESS(status)) { - unsigned long round; - - if (!gap.gapstart) { - printk(KERN_ERR "ACPI: Warning: Cannot find a gap " - "in the 32bit address range for PCI\n" - "ACPI: PCI devices may collide with " - "hotpluggable memory address range\n"); - } - /* - * Round the gapstart, uses the same logic as in - * e820_gap_setup - */ - round = 0x100000; - while ((gap.gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gap.gapstart + round) & -round; - - printk(KERN_INFO "ACPI: PCI resources should " - "start at %lx (gap: %lx:%lx)\n", - pci_mem_start, gap.gapstart, gap.gapsize); - } else { - printk(KERN_ERR "ACPI: Error while searching for gap in " - "the 32bit address range for PCI\n"); - } -} - - static void get_current_resources(struct acpi_device *device, int busnum, int domain, struct pci_bus *bus) @@ -293,8 +215,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (bus && (pci_probe & PCI_USE__CRS)) get_current_resources(device, busnum, domain, bus); - - pci_setup_gap(device->handle); return bus; } -- cgit v0.10.2