From eb546195a7d8bc492ec6865980bf767474e74d87 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 4 Jun 2012 15:05:43 +0200 Subject: s390/sigp: use sigp order code defines in assembly code Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/base.S b/arch/s390/kernel/base.S index c880ff7..8c20d0e 100644 --- a/arch/s390/kernel/base.S +++ b/arch/s390/kernel/base.S @@ -9,6 +9,7 @@ #include #include #include +#include #ifdef CONFIG_64BIT @@ -100,7 +101,7 @@ ENTRY(diag308_reset) .Lrestart_part2: lhi %r0,0 # Load r0 with zero lhi %r1,2 # Use mode 2 = ESAME (dump) - sigp %r1,%r0,0x12 # Switch to ESAME mode + sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to ESAME mode sam64 # Switch to 64 bit addressing mode larl %r4,.Lctlregs # Restore control registers lctlg %c0,%c15,0(%r4) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 1ae93b5..3787f9e 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -18,6 +18,7 @@ #include #include #include +#include __PT_R0 = __PT_GPRS __PT_R1 = __PT_GPRS + 4 @@ -726,12 +727,12 @@ ENTRY(restart_int_handler) lm %r1,%r3,__LC_RESTART_FN # load fn, parm & source cpu ltr %r3,%r3 # test source cpu address jm 1f # negative -> skip source stop -0: sigp %r4,%r3,1 # sigp sense to source cpu +0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu brc 10,0b # wait for status stored 1: basr %r14,%r1 # call function stap __SF_EMPTY(%r15) # store cpu address lh %r3,__SF_EMPTY(%r15) -2: sigp %r4,%r3,5 # sigp stop to current cpu +2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu brc 2,2b 3: j 3b diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index bf80a59..d5f02e4 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -18,6 +18,7 @@ #include #include #include +#include __PT_R0 = __PT_GPRS __PT_R1 = __PT_GPRS + 8 @@ -753,12 +754,12 @@ ENTRY(restart_int_handler) lmg %r1,%r3,__LC_RESTART_FN # load fn, parm & source cpu ltgr %r3,%r3 # test source cpu address jm 1f # negative -> skip source stop -0: sigp %r4,%r3,1 # sigp sense to source cpu +0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu brc 10,0b # wait for status stored 1: basr %r14,%r1 # call function stap __SF_EMPTY(%r15) # store cpu address llgh %r3,__SF_EMPTY(%r15) -2: sigp %r4,%r3,5 # sigp stop to current cpu +2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu brc 2,2b 3: j 3b diff --git a/arch/s390/kernel/head_kdump.S b/arch/s390/kernel/head_kdump.S index 796c976..acaaaf4 100644 --- a/arch/s390/kernel/head_kdump.S +++ b/arch/s390/kernel/head_kdump.S @@ -5,6 +5,8 @@ * Author(s): Michael Holzheu */ +#include + #define DATAMOVER_ADDR 0x4000 #define COPY_PAGE_ADDR 0x6000 @@ -19,7 +21,7 @@ .align 2 .Lep_startup_kdump: lhi %r1,2 # mode 2 = esame (dump) - sigp %r1,%r0,0x12 # Switch to esame mode + sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to esame mode sam64 # Switch to 64 bit addressing basr %r13,0 .Lbase: @@ -88,7 +90,7 @@ startup_kdump_relocated: sam31 # Switch to 31 bit addr mode sr %r1,%r1 # Erase register r1 sr %r2,%r2 # Erase register r2 - sigp %r1,%r2,0x12 # Switch to 31 bit arch mode + sigp %r1,%r2,SIGP_SET_ARCHITECTURE # Switch to 31 bit arch mode lpsw 0 # Start new kernel... .align 8 .Lrestart_psw: diff --git a/arch/s390/kernel/reipl.S b/arch/s390/kernel/reipl.S index ad67c21..1c5e9e3 100644 --- a/arch/s390/kernel/reipl.S +++ b/arch/s390/kernel/reipl.S @@ -8,6 +8,7 @@ #include #include +#include # # store_status: Empty implementation until kdump is supported on 31 bit @@ -60,7 +61,7 @@ ENTRY(do_reipl_asm) bas %r14,.Ldisab-.Lpg0(%r13) .L003: st %r1,__LC_SUBCHANNEL_ID lpsw 0 - sigp 0,0,0(6) + sigp 0,0,SIGP_RESTART .Ldisab: st %r14,.Ldispsw+4-.Lpg0(%r13) lpsw .Ldispsw-.Lpg0(%r13) .align 8 diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S index 36b3265..02f5a73 100644 --- a/arch/s390/kernel/reipl64.S +++ b/arch/s390/kernel/reipl64.S @@ -6,6 +6,7 @@ #include #include +#include # # store_status @@ -106,7 +107,7 @@ ENTRY(do_reipl_asm) .L003: st %r1,__LC_SUBCHANNEL_ID lhi %r1,0 # mode 0 = esa slr %r0,%r0 # set cpuid to zero - sigp %r1,%r0,0x12 # switch to esa mode + sigp %r1,%r0,SIGP_SET_ARCHITECTURE # switch to esa mode lpsw 0 .Ldisab: sll %r14,1 srl %r14,1 # need to kill hi bit to avoid specification exceptions. diff --git a/arch/s390/kernel/relocate_kernel.S b/arch/s390/kernel/relocate_kernel.S index c91d70a..bfad96a 100644 --- a/arch/s390/kernel/relocate_kernel.S +++ b/arch/s390/kernel/relocate_kernel.S @@ -9,6 +9,7 @@ */ #include +#include /* * moves the new kernel to its destination... @@ -93,7 +94,7 @@ ENTRY(relocate_kernel) .no_diag308: sr %r1,%r1 # clear %r1 sr %r2,%r2 # clear %r2 - sigp %r1,%r2,0x12 # set cpuid to zero + sigp %r1,%r2,SIGP_SET_ARCHITECTURE # set cpuid to zero lpsw 0 # hopefully start new kernel... .align 8 diff --git a/arch/s390/kernel/relocate_kernel64.S b/arch/s390/kernel/relocate_kernel64.S index 7c3ce58..35508f3 100644 --- a/arch/s390/kernel/relocate_kernel64.S +++ b/arch/s390/kernel/relocate_kernel64.S @@ -9,6 +9,7 @@ */ #include +#include /* * moves the new kernel to its destination... @@ -45,7 +46,7 @@ ENTRY(relocate_kernel) diag %r0,%r0,0x308 .back: lhi %r1,1 # mode 1 = esame - sigp %r1,%r0,0x12 # switch to esame mode + sigp %r1,%r0,SIGP_SET_ARCHITECTURE # switch to esame mode sam64 # switch to 64 bit addressing mode basr %r13,0 .back_base: @@ -96,7 +97,7 @@ ENTRY(relocate_kernel) sam31 # 31 bit mode sr %r1,%r1 # erase register r1 sr %r2,%r2 # erase register r2 - sigp %r1,%r2,0x12 # set cpuid to zero + sigp %r1,%r2,SIGP_SET_ARCHITECTURE # set cpuid to zero lpsw 0 # hopefully start new kernel... .align 8 diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 53ac234..e014084 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -288,11 +288,13 @@ static void pcpu_delegate(struct pcpu *pcpu, void (*func)(void *), /* Restart func on the target cpu and stop the current cpu. */ memcpy_absolute(&lc->restart_stack, &restart, sizeof(restart)); asm volatile( - "0: sigp 0,%0,6 # sigp restart to target cpu\n" + "0: sigp 0,%0,%2 # sigp restart to target cpu\n" " brc 2,0b # busy, try again\n" - "1: sigp 0,%1,5 # sigp stop to current cpu\n" + "1: sigp 0,%1,%3 # sigp stop to current cpu\n" " brc 2,1b # busy, try again\n" - : : "d" (pcpu->address), "d" (restart.source) : "0", "1", "cc"); + : : "d" (pcpu->address), "d" (restart.source), + "K" (SIGP_RESTART), "K" (SIGP_STOP) + : "0", "1", "cc"); for (;;) ; } diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S index dd70ef0..d4ca4e0 100644 --- a/arch/s390/kernel/swsusp_asm64.S +++ b/arch/s390/kernel/swsusp_asm64.S @@ -12,6 +12,7 @@ #include #include #include +#include /* * Save register context in absolute 0 lowcore and call swsusp_save() to @@ -163,7 +164,7 @@ ENTRY(swsusp_arch_resume) diag %r0,%r0,0x308 restart_entry: lhi %r1,1 - sigp %r1,%r0,0x12 + sigp %r1,%r0,SIGP_SET_ARCHITECTURE sam64 larl %r1,.Lnew_pgm_check_psw lpswe 0(%r1) @@ -179,7 +180,7 @@ pgm_check_entry: larl %r4,.Lrestart_suspend_psw /* Set new restart PSW */ mvc __LC_RST_NEW_PSW(16,%r0),0(%r4) 3: - sigp %r9,%r1,11 /* sigp initial cpu reset */ + sigp %r9,%r1,SIGP_INITIAL_CPU_RESET /* sigp initial cpu reset */ brc 8,4f /* accepted */ brc 2,3b /* busy, try again */ @@ -190,16 +191,16 @@ pgm_check_entry: larl %r3,_sclp_print_early lghi %r1,0 sam31 - sigp %r1,%r0,0x12 + sigp %r1,%r0,SIGP_SET_ARCHITECTURE basr %r14,%r3 larl %r3,.Ldisabled_wait_31 lpsw 0(%r3) 4: /* Switch to suspend CPU */ - sigp %r9,%r1,6 /* sigp restart to suspend CPU */ + sigp %r9,%r1,SIGP_RESTART /* sigp restart to suspend CPU */ brc 2,4b /* busy, try again */ 5: - sigp %r9,%r2,5 /* sigp stop to current resume CPU */ + sigp %r9,%r2,SIGP_STOP /* sigp stop to current resume CPU */ brc 2,5b /* busy, try again */ 6: j 6b @@ -207,7 +208,7 @@ restart_suspend: larl %r1,.Lresume_cpu llgh %r2,0(%r1) 7: - sigp %r9,%r2,1 /* sigp sense, wait for resume CPU */ + sigp %r9,%r2,SIGP_SENSE /* sigp sense, wait for resume CPU */ brc 8,7b /* accepted, status 0, still running */ brc 2,7b /* busy, try again */ tmll %r9,0x40 /* Test if resume CPU is stopped */ -- cgit v0.10.2