From 91b1a84c10869e2e46a576e5367de3166bff8ecc Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:46:39 -0500 Subject: sata_mv: cleanup chipset GENeration FLAGS Clean up the chipset GENeration FLAGS, and rename them for consistency with other uses of GEN_XX within sata_mv. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 74b1080..3dc3554 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -120,14 +120,15 @@ enum { MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | - ATA_FLAG_PIO_POLLING, + ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, + MV_GEN_I_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI, - MV_GENIIE_FLAGS = MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_GEN_II_FLAGS = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE | ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | ATA_FLAG_AN, + ATA_FLAG_NCQ | ATA_FLAG_NO_ATAPI, + + MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, CRQB_FLAG_READ = (1 << 0), CRQB_TAG_SHIFT = 1, @@ -603,53 +604,49 @@ static struct ata_port_operations mv_iie_ops = { static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ - .flags = MV_COMMON_FLAGS, + .flags = MV_GEN_I_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_508x */ - .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_5080 */ - .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_604x */ - .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ, + .flags = MV_GEN_II_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_608x */ - .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | MV_FLAG_DUAL_HC, + .flags = MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_6042 */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_7042 */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_soc */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, -- cgit v0.10.2 From 00b81235aa0368f84c0e704bec4142cd8c516ad5 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:47:51 -0500 Subject: sata_mv: rearrange mv_start_dma() and friends Rearrange mv_start_dma() and friends, in preparation for adding non-EDMA DMA modes, and non-EDMA interrupts, to the driver. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 3dc3554..fb3288b 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -536,7 +536,7 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); static int mv_stop_edma(struct ata_port *ap); static int mv_stop_edma_engine(void __iomem *port_mmio); -static void mv_edma_cfg(struct ata_port *ap, int want_ncq); +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma); static void mv_pmp_select(struct ata_port *ap, int pmp); static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class, @@ -849,8 +849,32 @@ static void mv_enable_port_irqs(struct ata_port *ap, mv_set_main_irq_mask(ap->host, disable_bits, enable_bits); } +static void mv_clear_and_enable_port_irqs(struct ata_port *ap, + void __iomem *port_mmio, + unsigned int port_irqs) +{ + struct mv_host_priv *hpriv = ap->host->private_data; + int hardport = mv_hardport_from_port(ap->port_no); + void __iomem *hc_mmio = mv_hc_base_from_port( + mv_host_base(ap->host), ap->port_no); + u32 hc_irq_cause; + + /* clear EDMA event indicators, if any */ + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + + /* clear FIS IRQ Cause */ + if (IS_GEN_IIE(hpriv)) + writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + + mv_enable_port_irqs(ap, port_irqs); +} + /** - * mv_start_dma - Enable eDMA engine + * mv_start_edma - Enable eDMA engine * @base: port base address * @pp: port private data * @@ -860,7 +884,7 @@ static void mv_enable_port_irqs(struct ata_port *ap, * LOCKING: * Inherited from caller. */ -static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, +static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio, struct mv_port_priv *pp, u8 protocol) { int want_ncq = (protocol == ATA_PROT_NCQ); @@ -872,26 +896,11 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, } if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) { struct mv_host_priv *hpriv = ap->host->private_data; - int hardport = mv_hardport_from_port(ap->port_no); - void __iomem *hc_mmio = mv_hc_base_from_port( - mv_host_base(ap->host), ap->port_no); - u32 hc_irq_cause; - - /* clear EDMA event indicators, if any */ - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - /* clear pending irq events */ - hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); - writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); - mv_edma_cfg(ap, want_ncq); - - /* clear FIS IRQ Cause */ - if (IS_GEN_IIE(hpriv)) - writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + mv_edma_cfg(ap, want_ncq, 1); mv_set_edma_ptrs(port_mmio, hpriv, pp); - mv_enable_port_irqs(ap, DONE_IRQ|ERR_IRQ); + mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ); writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS); pp->pp_flags |= MV_PP_FLAG_EDMA_EN; @@ -1173,7 +1182,7 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS); } -static void mv_edma_cfg(struct ata_port *ap, int want_ncq) +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) { u32 cfg; struct mv_port_priv *pp = ap->private_data; @@ -1182,7 +1191,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) /* set up non-NCQ EDMA configuration */ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ - pp->pp_flags &= ~MV_PP_FLAG_FBS_EN; + pp->pp_flags &= ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN); if (IS_GEN_I(hpriv)) cfg |= (1 << 8); /* enab config burst size mask */ @@ -1211,9 +1220,11 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) } cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ - cfg |= (1 << 22); /* enab 4-entry host queue cache */ - if (!IS_SOC(hpriv)) - cfg |= (1 << 18); /* enab early completion */ + if (want_edma) { + cfg |= (1 << 22); /* enab 4-entry host queue cache */ + if (!IS_SOC(hpriv)) + cfg |= (1 << 18); /* enab early completion */ + } if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ } @@ -1221,8 +1232,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) if (want_ncq) { cfg |= EDMA_CFG_NCQ; pp->pp_flags |= MV_PP_FLAG_NCQ_EN; - } else - pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN; + } writelfl(cfg, port_mmio + EDMA_CFG_OFS); } @@ -1591,7 +1601,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) return ata_sff_qc_issue(qc); } - mv_start_dma(ap, port_mmio, pp, qc->tf.protocol); + mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; -- cgit v0.10.2 From f48765ccb48a62596b664aa88a2b0f943c12c0e1 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:48:41 -0500 Subject: sata_mv: restructure mv_qc_issue Rearrange logic in mv_qc_issue() to handle protocols other than ATA_PROT_DMA, ATA_PROT_NCQ, and ATA_PROT_PIO. This is in preparation for later enabling ATAPI support. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index fb3288b..0c25f52 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1565,14 +1565,26 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) */ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) { + static int limit_warnings = 10; struct ata_port *ap = qc->ap; void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; u32 in_index; + unsigned int port_irqs = DONE_IRQ | ERR_IRQ; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NCQ: + mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); + pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; + in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; + + /* Write the request in pointer to kick the EDMA to life */ + writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + return 0; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) { - static int limit_warnings = 10; + case ATA_PROT_PIO: /* * Errata SATA#16, SATA#24: warn if multiple DRQs expected. * @@ -1590,27 +1602,22 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) ": attempting PIO w/multiple DRQ: " "this may fail due to h/w errata\n"); } + /* drop through */ + case ATAPI_PROT_PIO: + port_irqs = ERR_IRQ; /* leave DONE_IRQ masked for PIO */ + /* drop through */ + default: /* * We're about to send a non-EDMA capable command to the * port. Turn off EDMA so there won't be problems accessing * shadow block, etc registers. */ mv_stop_edma(ap); - mv_enable_port_irqs(ap, ERR_IRQ); + mv_edma_cfg(ap, 0, 0); + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); mv_pmp_select(ap, qc->dev->link->pmp); return ata_sff_qc_issue(qc); } - - mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); - - pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; - in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; - - /* and write the request in pointer to kick the EDMA to life */ - writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, - port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - return 0; } static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) -- cgit v0.10.2 From 95db505125fb7bc624b7c3b6747bbeaebbffc2e4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:49:29 -0500 Subject: sata_mv: update ata_qc_from_tag Update the logic in ata_qc_from_tag() to match that used in similar places elsewhere in libata. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 0c25f52..181f021 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1628,6 +1628,12 @@ static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) return NULL; qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc) { + if (qc->tf.flags & ATA_TFLAG_POLLING) + qc = NULL; + else if (!(qc->flags & ATA_QCFLAG_ACTIVE)) + qc = NULL; + } if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) qc = NULL; return qc; -- cgit v0.10.2 From 32cd11a61007511ddb38783deec8bb1aa6735789 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sun, 1 Feb 2009 16:50:32 -0500 Subject: sata_mv: mv_fill_sg fixes v2 Fix mv_fill_sg() to zero out the reserved word (required for ATAPI), and to include a memory barrier. This may also help with problems reported by Jens on the PPC platform. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 181f021..9c8ea2c 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1364,12 +1364,13 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) u32 offset = addr & 0xffff; u32 len = sg_len; - if ((offset + sg_len > 0x10000)) + if (offset + len > 0x10000) len = 0x10000 - offset; mv_sg->addr = cpu_to_le32(addr & 0xffffffff); mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); mv_sg->flags_size = cpu_to_le32(len & 0xffff); + mv_sg->reserved = 0; sg_len -= len; addr += len; @@ -1381,6 +1382,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) if (likely(last_sg)) last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + mb(); /* ensure data structure is visible to the chipset */ } static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) -- cgit v0.10.2 From da14265e776f35067045b8555b5f5f7521e50bc4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:51:54 -0500 Subject: sata_mv: introduce support for ATAPI devices Add ATAPI support to sata_mv, using sff DMA for GEN_II chipsets, and plain old PIO for GEN_IIE. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 9c8ea2c..6f8a49b 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -31,8 +31,6 @@ * * --> Complete a full errata audit for all chipsets to identify others. * - * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). - * * --> Develop a low-power-consumption strategy, and implement it. * * --> [Experiment, low priority] Investigate interrupt coalescing. @@ -68,7 +66,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.25" +#define DRV_VERSION "1.26" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -126,7 +124,7 @@ enum { MV_GEN_II_FLAGS = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE | ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | ATA_FLAG_NO_ATAPI, + ATA_FLAG_NCQ, MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, @@ -348,6 +346,12 @@ enum { EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ + + BMDMA_CMD_OFS = 0x224, /* bmdma command register */ + BMDMA_STATUS_OFS = 0x228, /* bmdma status register */ + BMDMA_PRD_LOW_OFS = 0x22c, /* bmdma PRD addr 31:0 */ + BMDMA_PRD_HIGH_OFS = 0x230, /* bmdma PRD addr 63:32 */ + /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), MV_HP_ERRATA_50XXB0 = (1 << 1), @@ -547,6 +551,15 @@ static void mv_pmp_error_handler(struct ata_port *ap); static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp); +static unsigned long mv_mode_filter(struct ata_device *dev, + unsigned long xfer_mask); +static void mv_sff_irq_clear(struct ata_port *ap); +static int mv_check_atapi_dma(struct ata_queued_cmd *qc); +static void mv_bmdma_setup(struct ata_queued_cmd *qc); +static void mv_bmdma_start(struct ata_queued_cmd *qc); +static void mv_bmdma_stop(struct ata_queued_cmd *qc); +static u8 mv_bmdma_status(struct ata_port *ap); + /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below * because we have to allow room for worst case splitting of * PRDs for 64K boundaries in mv_fill_sg(). @@ -594,6 +607,14 @@ static struct ata_port_operations mv6_ops = { .pmp_softreset = mv_softreset, .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, + + .sff_irq_clear = mv_sff_irq_clear, + .check_atapi_dma = mv_check_atapi_dma, + .bmdma_setup = mv_bmdma_setup, + .bmdma_start = mv_bmdma_start, + .bmdma_stop = mv_bmdma_stop, + .bmdma_status = mv_bmdma_status, + .mode_filter = mv_mode_filter, }; static struct ata_port_operations mv_iie_ops = { @@ -1393,6 +1414,167 @@ static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) } /** + * mv_mode_filter - Allow ATAPI DMA only on GenII chips. + * @dev: device whose xfer modes are being configured. + * + * Only the GenII hardware can use DMA with ATAPI drives. + */ +static unsigned long mv_mode_filter(struct ata_device *adev, + unsigned long xfer_mask) +{ + if (adev->class == ATA_DEV_ATAPI) { + struct mv_host_priv *hpriv = adev->link->ap->host->private_data; + if (!IS_GEN_II(hpriv)) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_printk(adev, KERN_INFO, + "ATAPI DMA not supported on this chipset\n"); + } + } + return xfer_mask; +} + +/** + * mv_sff_irq_clear - Clear hardware interrupt after DMA. + * @ap: Port associated with this ATA transaction. + * + * We need this only for ATAPI bmdma transactions, + * as otherwise we experience spurious interrupts + * after libata-sff handles the bmdma interrupts. + */ +static void mv_sff_irq_clear(struct ata_port *ap) +{ + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ); +} + +/** + * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA. + * @qc: queued command to check for chipset/DMA compatibility. + * + * The bmdma engines cannot handle speculative data sizes + * (bytecount under/over flow). So only allow DMA for + * data transfer commands with known data sizes. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + + if (scmd) { + switch (scmd->cmnd[0]) { + case READ_6: + case READ_10: + case READ_12: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case GPCMD_READ_CD: + case GPCMD_SEND_DVD_STRUCTURE: + case GPCMD_SEND_CUE_SHEET: + return 0; /* DMA is safe */ + } + } + return -EOPNOTSUPP; /* use PIO instead */ +} + +/** + * mv_bmdma_setup - Set up BMDMA transaction + * @qc: queued command to prepare DMA for. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + mv_fill_sg(qc); + + /* clear all DMA cmd bits */ + writel(0, port_mmio + BMDMA_CMD_OFS); + + /* load PRD table addr. */ + writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16, + port_mmio + BMDMA_PRD_HIGH_OFS); + writelfl(pp->sg_tbl_dma[qc->tag], + port_mmio + BMDMA_PRD_LOW_OFS); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +/** + * mv_bmdma_start - Start a BMDMA transaction + * @qc: queued command to start DMA on. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START; + + /* start host DMA transaction */ + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); +} + +/** + * mv_bmdma_stop - Stop BMDMA transfer + * @qc: queued command to stop DMA on. + * + * Clears the ATA_DMA_START flag in the bmdma control register + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + u32 cmd; + + /* clear start/stop bit */ + cmd = readl(port_mmio + BMDMA_CMD_OFS); + cmd &= ~ATA_DMA_START; + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +/** + * mv_bmdma_status - Read BMDMA status + * @ap: port for which to retrieve DMA status. + * + * Read and return equivalent of the sff BMDMA status register. + * + * LOCKING: + * Inherited from caller. + */ +static u8 mv_bmdma_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 reg, status; + + /* + * Other bits are valid only if ATA_DMA_ACTIVE==0, + * and the ATA_DMA_INTR bit doesn't exist. + */ + reg = readl(port_mmio + BMDMA_STATUS_OFS); + if (reg & ATA_DMA_ACTIVE) + status = ATA_DMA_ACTIVE; + else + status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR; + return status; +} + +/** * mv_qc_prep - Host specific command preparation. * @qc: queued command to prepare * -- cgit v0.10.2 From 66e57a2cb0c538d4f84a7233c224735fe1eaa672 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:52:58 -0500 Subject: sata_mv: optimize use of mv_edma_cfg Try and avoid unnecessary reconfiguration of the EDMA config register on every single non-EDMA I/O operation, by moving the call to mv_edma_cfg() into mv_stop_edma(). It must then also be invoked from mv_hardreset() and from mv_port_start(). Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 6f8a49b..8f356e4 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -979,6 +979,7 @@ static int mv_stop_edma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; + int err = 0; if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) return 0; @@ -986,9 +987,10 @@ static int mv_stop_edma(struct ata_port *ap) mv_wait_for_edma_empty_idle(ap); if (mv_stop_edma_engine(port_mmio)) { ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); - return -EIO; + err = -EIO; } - return 0; + mv_edma_cfg(ap, 0, 0); + return err; } #ifdef ATA_DEBUG @@ -1337,6 +1339,7 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0]; } } + mv_edma_cfg(ap, 0, 0); return 0; out_port_free_dma_mem: @@ -1797,7 +1800,6 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) * shadow block, etc registers. */ mv_stop_edma(ap); - mv_edma_cfg(ap, 0, 0); mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); mv_pmp_select(ap, qc->dev->link->pmp); return ata_sff_qc_issue(qc); @@ -2997,6 +2999,7 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, extra = HZ; /* only extend it once, max */ } } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123); + mv_edma_cfg(ap, 0, 0); return rc; } -- cgit v0.10.2 From 84bcbeebcfd283c3f4804287ed4610c3a18e1590 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 21:40:48 -0500 Subject: sata_mv: remove leftovers Remove redundant code left over from the earlier patch 04/07. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 8f356e4..1f14b1b 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1820,8 +1820,6 @@ static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) else if (!(qc->flags & ATA_QCFLAG_ACTIVE)) qc = NULL; } - if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) - qc = NULL; return qc; } -- cgit v0.10.2 From 96b34ce7cafa0888580698d199b9fac6ad9f9a2e Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 27 Jan 2009 14:35:50 +0100 Subject: pata-rb532-cf: replace rb532_pata_finish_io() Since the delay used internally is just the same as ata_sff_pause() uses, rb532_pata_finish_io() does exactly the same as ata_sff_pause() and thus can be replaced by the later one. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index ebfcda2..6fe660b 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -54,22 +54,11 @@ struct rb532_cf_info { /* ------------------------------------------------------------------------ */ -static inline void rb532_pata_finish_io(struct ata_port *ap) -{ - struct ata_host *ah = ap->host; - struct rb532_cf_info *info = ah->private_data; - - /* FIXME: Keep previous delay. If this is merely a fence then - ata_sff_sync might be sufficient. */ - ata_sff_dma_pause(ap); - ndelay(RB500_CF_IO_DELAY); -} - static void rb532_pata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { writeb(tf->command, ap->ioaddr.command_addr); - rb532_pata_finish_io(ap); + ata_sff_pause(ap); } static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, @@ -87,7 +76,7 @@ static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf = readb(ioaddr); } - rb532_pata_finish_io(adev->link->ap); + ata_sff_pause(ap); return retlen; } -- cgit v0.10.2 From bff9ad3c4c8fff340854d3912196ed470f94602c Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 27 Jan 2009 14:35:51 +0100 Subject: pata-rb532-cf: use ata_sff_exec_command() The only difference between rb532_pata_exec_command() and ata_sff_exec_command() is added debugging output, so it can be dropped and the standard op used instead. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 6fe660b..9d61ce5 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -54,13 +54,6 @@ struct rb532_cf_info { /* ------------------------------------------------------------------------ */ -static void rb532_pata_exec_command(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - writeb(tf->command, ap->ioaddr.command_addr); - ata_sff_pause(ap); -} - static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { @@ -112,7 +105,6 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) static struct ata_port_operations rb532_pata_port_ops = { .inherits = &ata_sff_port_ops, - .sff_exec_command = rb532_pata_exec_command, .sff_data_xfer = rb532_pata_data_xfer, .freeze = rb532_pata_freeze, .thaw = rb532_pata_thaw, -- cgit v0.10.2 From 180bd147f18316d92bd5f59aebc9932cabc03edd Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 27 Jan 2009 14:35:52 +0100 Subject: pata-rb532-cf: use ata_sff_data_xfer32() The biggest difference between rb532_pata_data_xfer() and ata_sff_data_xfer32() is the call to ata_sff_pause() at the end of rb532_pata_data_xfer() which I suppose to be unnecessary since it works without. I've also tested using ata_sff_data_xfer() as replacement, but since we know that the driver supports 32bit IO, using the optimised version should be safe. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 9d61ce5..9fb91e4 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -54,25 +54,6 @@ struct rb532_cf_info { /* ------------------------------------------------------------------------ */ -static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - struct ata_port *ap = adev->link->ap; - void __iomem *ioaddr = ap->ioaddr.data_addr; - int retlen = buflen; - - if (write_data) { - for (; buflen > 0; buflen--, buf++) - writeb(*buf, ioaddr); - } else { - for (; buflen > 0; buflen--, buf++) - *buf = readb(ioaddr); - } - - ata_sff_pause(ap); - return retlen; -} - static void rb532_pata_freeze(struct ata_port *ap) { struct rb532_cf_info *info = ap->host->private_data; @@ -105,7 +86,7 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) static struct ata_port_operations rb532_pata_port_ops = { .inherits = &ata_sff_port_ops, - .sff_data_xfer = rb532_pata_data_xfer, + .sff_data_xfer = ata_sff_data_xfer32, .freeze = rb532_pata_freeze, .thaw = rb532_pata_thaw, }; -- cgit v0.10.2 From 6be976e79db3ba691b657476a8bf4a635e5586f9 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 27 Jan 2009 14:35:53 +0100 Subject: pata-rb532-cf: drop custom freeze and thaw I'm not quite sure what freezing and thawing is used for. Tests showed that the port is being frozen at initialisation state and thawed right afterwards, then the functions were not called anymore. Dropping the complete custom code for handling the frozen state seems to work at least for a standard use case including mounting a partition, copying some files in it (in parallel) and finally removing them and unmounting the partition. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 9fb91e4..fbfee1b 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -48,26 +48,11 @@ struct rb532_cf_info { void __iomem *iobase; unsigned int gpio_line; - int frozen; unsigned int irq; }; /* ------------------------------------------------------------------------ */ -static void rb532_pata_freeze(struct ata_port *ap) -{ - struct rb532_cf_info *info = ap->host->private_data; - - info->frozen = 1; -} - -static void rb532_pata_thaw(struct ata_port *ap) -{ - struct rb532_cf_info *info = ap->host->private_data; - - info->frozen = 0; -} - static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) { struct ata_host *ah = dev_instance; @@ -75,8 +60,7 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) if (gpio_get_value(info->gpio_line)) { set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW); - if (!info->frozen) - ata_sff_interrupt(info->irq, dev_instance); + ata_sff_interrupt(info->irq, dev_instance); } else { set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); } @@ -87,8 +71,6 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) static struct ata_port_operations rb532_pata_port_ops = { .inherits = &ata_sff_port_ops, .sff_data_xfer = ata_sff_data_xfer32, - .freeze = rb532_pata_freeze, - .thaw = rb532_pata_thaw, }; /* ------------------------------------------------------------------------ */ -- cgit v0.10.2 From a5bfc4714b3f01365aef89a92673f2ceb1ccf246 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 23 Jan 2009 11:31:39 +0900 Subject: ahci: drop intx manipulation on msi enable There's no need to turn off intx explicitly on msi enable. This is automatically handled by pci. Drop it. This might be needed on machines if the BIOS turns intx off during boot. However, there's no evidence of such behavior for ahci and the only such case seems to be ICH5 PATA according to ata_piix. Also, given the way ahci operates, it's highly unlikely BIOS ever disables IRQ for the controller. However, as this change has slight possibility of introducing failure, please schedule it for #upstream. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 66e012c..98d7a9f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2647,8 +2647,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; - if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) - pci_intx(pdev, 1); + if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) + pci_enable_msi(pdev); /* save initial config */ ahci_save_initial_config(pdev, hpriv); -- cgit v0.10.2 From 08da175937a35d34a83eaefbb3458472eb1a89d4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:13:03 -0500 Subject: [libata] sata_mv: cache frequently-accessed registers Maintain a local (mv_port_priv) cache of frequently accessed registers, to avoid having to re-read them (very slow) on every transistion between EDMA and non-EDMA modes. This speeds up things like flushing the drive write cache, and anything using basic DMA transfers. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 1f14b1b..146b8e6 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -438,6 +438,17 @@ struct mv_sg { __le32 reserved; }; +/* + * We keep a local cache of a few frequently accessed port + * registers here, to avoid having to read them (very slow) + * when switching between EDMA and non-EDMA modes. + */ +struct mv_cached_regs { + u32 fiscfg; + u32 ltmode; + u32 haltcond; +}; + struct mv_port_priv { struct mv_crqb *crqb; dma_addr_t crqb_dma; @@ -450,6 +461,7 @@ struct mv_port_priv { unsigned int resp_idx; u32 pp_flags; + struct mv_cached_regs cached; unsigned int delayed_eh_pmp_map; }; @@ -812,6 +824,43 @@ static inline int mv_get_hc_count(unsigned long port_flags) return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } +/** + * mv_save_cached_regs - (re-)initialize cached port registers + * @ap: the port whose registers we are caching + * + * Initialize the local cache of port registers, + * so that reading them over and over again can + * be avoided on the hotter paths of this driver. + * This saves a few microseconds each time we switch + * to/from EDMA mode to perform (eg.) a drive cache flush. + */ +static void mv_save_cached_regs(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + pp->cached.fiscfg = readl(port_mmio + FISCFG_OFS); + pp->cached.ltmode = readl(port_mmio + LTMODE_OFS); + pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); +} + +/** + * mv_write_cached_reg - write to a cached port register + * @addr: hardware address of the register + * @old: pointer to cached value of the register + * @new: new value for the register + * + * Write a new value to a cached register, + * but only if the value is different from before. + */ +static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) +{ + if (new != *old) { + *old = new; + writel(new, addr); + } +} + static void mv_set_edma_ptrs(void __iomem *port_mmio, struct mv_host_priv *hpriv, struct mv_port_priv *pp) @@ -1159,35 +1208,33 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) return ATA_DEFER_PORT; } -static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs) +static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs) { - u32 new_fiscfg, old_fiscfg; - u32 new_ltmode, old_ltmode; - u32 new_haltcond, old_haltcond; + struct mv_port_priv *pp = ap->private_data; + void __iomem *port_mmio; - old_fiscfg = readl(port_mmio + FISCFG_OFS); - old_ltmode = readl(port_mmio + LTMODE_OFS); - old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); + u32 fiscfg, *old_fiscfg = &pp->cached.fiscfg; + u32 ltmode, *old_ltmode = &pp->cached.ltmode; + u32 haltcond, *old_haltcond = &pp->cached.haltcond; - new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); - new_ltmode = old_ltmode & ~LTMODE_BIT8; - new_haltcond = old_haltcond | EDMA_ERR_DEV; + ltmode = *old_ltmode & ~LTMODE_BIT8; + haltcond = *old_haltcond | EDMA_ERR_DEV; if (want_fbs) { - new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC; - new_ltmode = old_ltmode | LTMODE_BIT8; + fiscfg = *old_fiscfg | FISCFG_SINGLE_SYNC; + ltmode = *old_ltmode | LTMODE_BIT8; if (want_ncq) - new_haltcond &= ~EDMA_ERR_DEV; + haltcond &= ~EDMA_ERR_DEV; else - new_fiscfg |= FISCFG_WAIT_DEV_ERR; + fiscfg |= FISCFG_WAIT_DEV_ERR; + } else { + fiscfg = *old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); } - if (new_fiscfg != old_fiscfg) - writelfl(new_fiscfg, port_mmio + FISCFG_OFS); - if (new_ltmode != old_ltmode) - writelfl(new_ltmode, port_mmio + LTMODE_OFS); - if (new_haltcond != old_haltcond) - writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS); + port_mmio = mv_ap_base(ap); + mv_write_cached_reg(port_mmio + FISCFG_OFS, old_fiscfg, fiscfg); + mv_write_cached_reg(port_mmio + LTMODE_OFS, old_ltmode, ltmode); + mv_write_cached_reg(port_mmio + EDMA_HALTCOND_OFS, old_haltcond, haltcond); } static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) @@ -1235,7 +1282,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) */ want_fbs &= want_ncq; - mv_config_fbs(port_mmio, want_ncq, want_fbs); + mv_config_fbs(ap, want_ncq, want_fbs); if (want_fbs) { pp->pp_flags |= MV_PP_FLAG_FBS_EN; @@ -1339,6 +1386,7 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0]; } } + mv_save_cached_regs(ap); mv_edma_cfg(ap, 0, 0); return 0; @@ -2997,6 +3045,7 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, extra = HZ; /* only extend it once, max */ } } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123); + mv_save_cached_regs(ap); mv_edma_cfg(ap, 0, 0); return rc; -- cgit v0.10.2 From c01e8a23128c746f23088db836bd4c820f3eb0b4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:14:48 -0500 Subject: [libata] sata_mv: Enable use of (basic) DMA for ATAPI on GEN_IIE chips This also gets rid of any need for mv_mode_filter(). Using basic DMA on GEN_IIE requires setting an undocumented bit in an undocumented register. For safety, we clear that bit again when switching back to EDMA mode. To avoid a performance penalty when switching modes, we cache the register in port_priv, as already done for other regs. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 146b8e6..3bfe721 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -345,7 +345,7 @@ enum { EDMA_ARB_CFG_OFS = 0x38, EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ - + EDMA_UNKNOWN_RSVD_OFS = 0x6C, /* GenIIe unknown/reserved */ BMDMA_CMD_OFS = 0x224, /* bmdma command register */ BMDMA_STATUS_OFS = 0x228, /* bmdma status register */ @@ -447,6 +447,7 @@ struct mv_cached_regs { u32 fiscfg; u32 ltmode; u32 haltcond; + u32 unknown_rsvd; }; struct mv_port_priv { @@ -563,8 +564,6 @@ static void mv_pmp_error_handler(struct ata_port *ap); static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp); -static unsigned long mv_mode_filter(struct ata_device *dev, - unsigned long xfer_mask); static void mv_sff_irq_clear(struct ata_port *ap); static int mv_check_atapi_dma(struct ata_queued_cmd *qc); static void mv_bmdma_setup(struct ata_queued_cmd *qc); @@ -626,7 +625,6 @@ static struct ata_port_operations mv6_ops = { .bmdma_start = mv_bmdma_start, .bmdma_stop = mv_bmdma_stop, .bmdma_status = mv_bmdma_status, - .mode_filter = mv_mode_filter, }; static struct ata_port_operations mv_iie_ops = { @@ -842,6 +840,7 @@ static void mv_save_cached_regs(struct ata_port *ap) pp->cached.fiscfg = readl(port_mmio + FISCFG_OFS); pp->cached.ltmode = readl(port_mmio + LTMODE_OFS); pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); + pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD_OFS); } /** @@ -1252,6 +1251,30 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS); } +/** + * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma + * @ap: Port being initialized + * + * There are two DMA modes on these chips: basic DMA, and EDMA. + * + * Bit-0 of the "EDMA RESERVED" register enables/disables use + * of basic DMA on the GEN_IIE versions of the chips. + * + * This bit survives EDMA resets, and must be set for basic DMA + * to function, and should be cleared when EDMA is active. + */ +static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma) +{ + struct mv_port_priv *pp = ap->private_data; + u32 new, *old = &pp->cached.unknown_rsvd; + + if (enable_bmdma) + new = *old | 1; + else + new = *old & ~1; + mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD_OFS, old, new); +} + static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) { u32 cfg; @@ -1297,6 +1320,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) } if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ + mv_bmdma_enable_iie(ap, !want_edma); } if (want_ncq) { @@ -1465,26 +1489,6 @@ static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) } /** - * mv_mode_filter - Allow ATAPI DMA only on GenII chips. - * @dev: device whose xfer modes are being configured. - * - * Only the GenII hardware can use DMA with ATAPI drives. - */ -static unsigned long mv_mode_filter(struct ata_device *adev, - unsigned long xfer_mask) -{ - if (adev->class == ATA_DEV_ATAPI) { - struct mv_host_priv *hpriv = adev->link->ap->host->private_data; - if (!IS_GEN_II(hpriv)) { - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - ata_dev_printk(adev, KERN_INFO, - "ATAPI DMA not supported on this chipset\n"); - } - } - return xfer_mask; -} - -/** * mv_sff_irq_clear - Clear hardware interrupt after DMA. * @ap: Port associated with this ATA transaction. * -- cgit v0.10.2 From 42ed893d8011264f9945c2f54055b47c298ac53e Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:15:39 -0500 Subject: [libata] sata_mv: Tighten up interrupt masking in mv_qc_issue() so that it doesn't miss any protocols. Handle future cases where a qc is specially marked for polled issue or where a particular chip version prefers interrupts over polling for PIO. This mimics the polling decision logic from ata_sff_qc_issue(). Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 3bfe721..b74af94 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1809,7 +1809,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; u32 in_index; - unsigned int port_irqs = DONE_IRQ | ERR_IRQ; + unsigned int port_irqs; switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -1842,20 +1842,28 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) "this may fail due to h/w errata\n"); } /* drop through */ + case ATA_PROT_NODATA: case ATAPI_PROT_PIO: - port_irqs = ERR_IRQ; /* leave DONE_IRQ masked for PIO */ - /* drop through */ - default: - /* - * We're about to send a non-EDMA capable command to the - * port. Turn off EDMA so there won't be problems accessing - * shadow block, etc registers. - */ - mv_stop_edma(ap); - mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); - mv_pmp_select(ap, qc->dev->link->pmp); - return ata_sff_qc_issue(qc); + case ATAPI_PROT_NODATA: + if (ap->flags & ATA_FLAG_PIO_POLLING) + qc->tf.flags |= ATA_TFLAG_POLLING; + break; } + + if (qc->tf.flags & ATA_TFLAG_POLLING) + port_irqs = ERR_IRQ; /* mask device interrupt when polling */ + else + port_irqs = ERR_IRQ | DONE_IRQ; /* unmask all interrupts */ + + /* + * We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_edma(ap); + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); + mv_pmp_select(ap, qc->dev->link->pmp); + return ata_sff_qc_issue(qc); } static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) -- cgit v0.10.2 From d16ab3f633b75aac1cf42b00355cd9aa65033dcc Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:17:43 -0500 Subject: [libata] sata_mv: Add a new mv_sff_check_status() function to sata_mv. This is necessary for use with the upcoming "mv_qc_issue_fis()" patch, but is being added separately here for easier code review. When using command issue via the "mv_qc_issue_fis()" mechanism, the initial ATA_BUSY bit does not show in the ATA status (shadow) register. This can confuse libata! So here we add a hook to fake ATA_BUSY for that situation, until the first time a BUSY, DRQ, or ERR bit is seen. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index b74af94..542e244 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -370,6 +370,7 @@ enum { MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */ MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */ MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */ + MV_PP_FLAG_FAKE_ATA_BUSY = (1 << 4), /* ignore initial ATA_DRDY */ }; #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) @@ -570,6 +571,7 @@ static void mv_bmdma_setup(struct ata_queued_cmd *qc); static void mv_bmdma_start(struct ata_queued_cmd *qc); static void mv_bmdma_stop(struct ata_queued_cmd *qc); static u8 mv_bmdma_status(struct ata_port *ap); +static u8 mv_sff_check_status(struct ata_port *ap); /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below * because we have to allow room for worst case splitting of @@ -619,6 +621,7 @@ static struct ata_port_operations mv6_ops = { .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, + .sff_check_status = mv_sff_check_status, .sff_irq_clear = mv_sff_irq_clear, .check_atapi_dma = mv_check_atapi_dma, .bmdma_setup = mv_bmdma_setup, @@ -1284,7 +1287,8 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) /* set up non-NCQ EDMA configuration */ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ - pp->pp_flags &= ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN); + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); if (IS_GEN_I(hpriv)) cfg |= (1 << 8); /* enab config burst size mask */ @@ -1791,6 +1795,33 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) } /** + * mv_sff_check_status - fetch device status, if valid + * @ap: ATA port to fetch status from + * + * When using command issue via mv_qc_issue_fis(), + * the initial ATA_BUSY state does not show up in the + * ATA status (shadow) register. This can confuse libata! + * + * So we have a hook here to fake ATA_BUSY for that situation, + * until the first time a BUSY, DRQ, or ERR bit is seen. + * + * The rest of the time, it simply returns the ATA status register. + */ +static u8 mv_sff_check_status(struct ata_port *ap) +{ + u8 stat = ioread8(ap->ioaddr.status_addr); + struct mv_port_priv *pp = ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_FAKE_ATA_BUSY) { + if (stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; + else + stat = ATA_BUSY; + } + return stat; +} + +/** * mv_qc_issue - Initiate a command to the host * @qc: queued command to start * @@ -1811,6 +1842,8 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) u32 in_index; unsigned int port_irqs; + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; /* paranoia */ + switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NCQ: @@ -3038,6 +3071,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, mv_reset_channel(hpriv, mmio, ap->port_no); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); /* Workaround for errata FEr SATA#10 (part 2) */ do { -- cgit v0.10.2 From 1a660164c291f41b2aa853a7269b310933574ef9 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:18:32 -0500 Subject: [libata] Export ata_pio_queue_task() so that it can be used from sata_mv. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 060bcd6..d4a7b8a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6709,6 +6709,7 @@ EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_do_dev_read_id); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_pio_queue_task); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_find_mode); EXPORT_SYMBOL_GPL(ata_timing_compute); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index cea8014..89a1e00 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -79,8 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev); -extern void ata_pio_queue_task(struct ata_port *ap, void *data, - unsigned long delay); extern void ata_port_flush_task(struct ata_port *ap); extern unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, diff --git a/include/linux/libata.h b/include/linux/libata.h index dc18b87..19af7d2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1008,6 +1008,9 @@ extern int ata_cable_sata(struct ata_port *ap); extern int ata_cable_ignore(struct ata_port *ap); extern int ata_cable_unknown(struct ata_port *ap); +extern void ata_pio_queue_task(struct ata_port *ap, void *data, + unsigned long delay); + /* Timing helpers */ extern unsigned int ata_pio_need_iordy(const struct ata_device *); extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode); -- cgit v0.10.2 From 70f8b79cf3a2eb892a01271fdfbb1903c0c982a8 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:19:20 -0500 Subject: [libata] sata_mv: Implement direct FIS transmission via mv_qc_issue_fis(). This is initially needed to work around NCQ errata, whereby the READ_LOG_EXT command sometimes fails when issued in the traditional (sff) fashion. Portions of this code will likely be reused for implementation of the target mode feature later on. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 542e244..8cad3b2 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1822,6 +1822,105 @@ static u8 mv_sff_check_status(struct ata_port *ap) } /** + * mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register + * @fis: fis to be sent + * @nwords: number of 32-bit words in the fis + */ +static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 ifctl, old_ifctl, ifstat; + int i, timeout = 200, final_word = nwords - 1; + + /* Initiate FIS transmission mode */ + old_ifctl = readl(port_mmio + SATA_IFCTL_OFS); + ifctl = 0x100 | (old_ifctl & 0xf); + writelfl(ifctl, port_mmio + SATA_IFCTL_OFS); + + /* Send all words of the FIS except for the final word */ + for (i = 0; i < final_word; ++i) + writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS_OFS); + + /* Flag end-of-transmission, and then send the final word */ + writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL_OFS); + writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS_OFS); + + /* + * Wait for FIS transmission to complete. + * This typically takes just a single iteration. + */ + do { + ifstat = readl(port_mmio + SATA_IFSTAT_OFS); + } while (!(ifstat & 0x1000) && --timeout); + + /* Restore original port configuration */ + writelfl(old_ifctl, port_mmio + SATA_IFCTL_OFS); + + /* See if it worked */ + if ((ifstat & 0x3000) != 0x1000) { + ata_port_printk(ap, KERN_WARNING, + "%s transmission error, ifstat=%08x\n", + __func__, ifstat); + return AC_ERR_OTHER; + } + return 0; +} + +/** + * mv_qc_issue_fis - Issue a command directly as a FIS + * @qc: queued command to start + * + * Note that the ATA shadow registers are not updated + * after command issue, so the device will appear "READY" + * if polled, even while it is BUSY processing the command. + * + * So we use a status hook to fake ATA_BUSY until the drive changes state. + * + * Note: we don't get updated shadow regs on *completion* + * of non-data commands. So avoid sending them via this function, + * as they will appear to have completed immediately. + * + * GEN_IIE has special registers that we could get the result tf from, + * but earlier chipsets do not. For now, we ignore those registers. + */ +static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + struct ata_link *link = qc->dev->link; + u32 fis[5]; + int err = 0; + + ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis); + err = mv_send_fis(ap, fis, sizeof(fis) / sizeof(fis[0])); + if (err) + return err; + + switch (qc->tf.protocol) { + case ATAPI_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + /* fall through */ + case ATAPI_PROT_NODATA: + ap->hsm_task_state = HSM_ST_FIRST; + break; + case ATA_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + if (qc->tf.flags & ATA_TFLAG_WRITE) + ap->hsm_task_state = HSM_ST_FIRST; + else + ap->hsm_task_state = HSM_ST; + break; + default: + ap->hsm_task_state = HSM_ST_LAST; + break; + } + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_pio_queue_task(ap, qc, 0); + return 0; +} + +/** * mv_qc_issue - Initiate a command to the host * @qc: queued command to start * @@ -1896,6 +1995,23 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) mv_stop_edma(ap); mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); mv_pmp_select(ap, qc->dev->link->pmp); + + if (qc->tf.command == ATA_CMD_READ_LOG_EXT) { + struct mv_host_priv *hpriv = ap->host->private_data; + /* + * Workaround for 88SX60x1 FEr SATA#25 (part 2). + * + * After any NCQ error, the READ_LOG_EXT command + * from libata-eh *must* use mv_qc_issue_fis(). + * Otherwise it might fail, due to chip errata. + * + * Rather than special-case it, we'll just *always* + * use this method here for READ_LOG_EXT, making for + * easier testing. + */ + if (IS_GEN_II(hpriv)) + return mv_qc_issue_fis(qc); + } return ata_sff_qc_issue(qc); } -- cgit v0.10.2 From d2f9c0614e664708978c53eca4a5963e92830e88 Mon Sep 17 00:00:00 2001 From: Maciej Rutecki Date: Fri, 20 Mar 2009 00:06:46 +0100 Subject: ahci: Blacklist HP Compaq 6720s that spins off disks during ACPI power off Blacklist HP Compaq 6720s so that it doesn't play a "spin down, spin up, spin down" ping-pong with the hard disk during system power off. Signed-off-by: Maciej Rutecki Signed-off-by: Rafael J. Wysocki Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 98d7a9f..699789b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2565,6 +2565,15 @@ static bool ahci_broken_system_poweroff(struct pci_dev *pdev) /* PCI slot number of the controller */ .driver_data = (void *)0x1FUL, }, + { + .ident = "HP Compaq 6720s", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, { } /* terminate list */ }; -- cgit v0.10.2 From 22ddbd1e036ce035c1cccb2496aefafac79aba2c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Inge=20Bols=C3=B8?= Date: Sat, 14 Mar 2009 21:37:48 +0100 Subject: include/linux/ata.h: add some more transfer masks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Erik Inge Bolsø Signed-off-by: Jeff Garzik diff --git a/include/linux/ata.h b/include/linux/ata.h index 9a061ac..3901b00 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -108,6 +108,8 @@ enum { ATA_PIO5 = ATA_PIO4 | (1 << 5), ATA_PIO6 = ATA_PIO5 | (1 << 6), + ATA_PIO4_ONLY = (1 << 4), + ATA_SWDMA0 = (1 << 0), ATA_SWDMA1 = ATA_SWDMA0 | (1 << 1), ATA_SWDMA2 = ATA_SWDMA1 | (1 << 2), @@ -117,6 +119,8 @@ enum { ATA_MWDMA0 = (1 << 0), ATA_MWDMA1 = ATA_MWDMA0 | (1 << 1), ATA_MWDMA2 = ATA_MWDMA1 | (1 << 2), + ATA_MWDMA3 = ATA_MWDMA2 | (1 << 3), + ATA_MWDMA4 = ATA_MWDMA3 | (1 << 4), ATA_MWDMA12_ONLY = (1 << 1) | (1 << 2), ATA_MWDMA2_ONLY = (1 << 2), @@ -131,6 +135,8 @@ enum { ATA_UDMA7 = ATA_UDMA6 | (1 << 7), /* ATA_UDMA7 is just for completeness... doesn't exist (yet?). */ + ATA_UDMA24_ONLY = (1 << 2) | (1 << 4), + ATA_UDMA_MASK_40C = ATA_UDMA2, /* udma0-2 */ /* DMA-related */ -- cgit v0.10.2 From 14bdef982caeda19afe34010482867c18217c641 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Inge=20Bols=C3=B8?= Date: Sat, 14 Mar 2009 21:38:24 +0100 Subject: [libata] convert drivers to use ata.h mode mask defines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit No functional changes in this patch. Signed-off-by: Erik Inge Bolsø Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 699789b..ec2922a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -404,7 +404,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci */ { .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -412,7 +412,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_vt8251_ops, }, @@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -430,7 +430,7 @@ static const struct ata_port_info ahci_port_info[] = { AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, @@ -440,7 +440,7 @@ static const struct ata_port_info ahci_port_info[] = { AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -448,7 +448,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, @@ -456,7 +456,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -464,7 +464,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index dc48a63..ecfd22b 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -118,8 +118,8 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id u16 command; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &generic_port_ops }; diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index ef8b30d..e5cbe80 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -446,34 +446,34 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_mwdma] = /* PIIX3 MWDMA only */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ .port_ops = &piix_pata_ops, }, [piix_pata_33] = /* PIIX4 at 33MHz */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .udma_mask = ATA_UDMA_MASK_40C, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, .port_ops = &piix_pata_ops, }, [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .mwdma_mask = 0x06, /* Check: maybe 0x07 */ - .udma_mask = ATA_UDMA2, /* UDMA33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* Check: maybe MWDMA0 is ok */ + .udma_mask = ATA_UDMA2, .port_ops = &ich_pata_ops, }, [ich_pata_66] = /* ICH controllers up to 66MHz */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* MWDMA0 is broken on chip */ .udma_mask = ATA_UDMA4, .port_ops = &ich_pata_ops, }, @@ -481,17 +481,17 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_100] = { .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, .port_ops = &ich_pata_ops, }, [ich5_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -499,8 +499,8 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -508,8 +508,8 @@ static struct ata_port_info piix_port_info[] = { [ich6m_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -517,8 +517,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_sata] = { .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -526,8 +526,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_2port_sata] = { .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -535,8 +535,8 @@ static struct ata_port_info piix_port_info[] = { [tolapai_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -544,8 +544,8 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -553,9 +553,9 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_vmw] = { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .udma_mask = ATA_UDMA_MASK_40C, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, .port_ops = &piix_vmw_ops, }, diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index 8b77a98..d8f35fe 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -246,9 +246,9 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id) static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x7f, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &pacpi_ops, }; diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index eb99dbe..751b7ea 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -492,53 +492,53 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info_early = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &ali_early_port_ops }; /* Revision 0x20 added DMA */ static const struct ata_port_info info_20 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &ali_20_port_ops }; /* Revision 0x20 with support logic added UDMA */ static const struct ata_port_info info_20_udma = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, /* UDMA33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &ali_20_port_ops }; /* Revision 0xC2 adds UDMA66 */ static const struct ata_port_info info_c2 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &ali_c2_port_ops }; /* Revision 0xC3 is UDMA66 for now */ static const struct ata_port_info info_c3 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &ali_c2_port_ops }; /* Revision 0xC4 is UDMA100 */ static const struct ata_port_info info_c4 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &ali_c4_port_ops }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ static const struct ata_port_info info_c5 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &ali_c5_port_ops }; diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 115b1cd..33a74f1 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -455,74 +455,74 @@ static void amd_clear_fifo(struct pci_dev *pdev) static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info[10] = { - { /* 0: AMD 7401 */ + { /* 0: AMD 7401 - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, /* No SWDMA */ - .udma_mask = 0x07, /* UDMA 33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &amd33_port_ops }, { /* 1: Early AMD7409 - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, .port_ops = &amd66_port_ops }, - { /* 2: AMD 7409, no swdma errata */ + { /* 2: AMD 7409 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, .port_ops = &amd66_port_ops }, { /* 3: AMD 7411 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd100_port_ops }, { /* 4: AMD 7441 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd100_port_ops }, - { /* 5: AMD 8111*/ + { /* 5: AMD 8111 - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA6, /* UDMA 133, no swdma */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &amd133_port_ops }, - { /* 6: AMD 8111 UDMA 100 (Serenade) */ + { /* 6: AMD 8111 UDMA 100 (Serenade) - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100, no swdma */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd133_port_ops }, { /* 7: Nvidia Nforce */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &nv100_port_ops }, - { /* 8: Nvidia Nforce2 and later */ + { /* 8: Nvidia Nforce2 and later - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA6, /* UDMA 133, no swdma */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &nv133_port_ops }, { /* 9: AMD CS5536 (Geode companion) */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd100_port_ops } }; diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 6b3092c..07c7fae 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -323,29 +323,29 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; static const struct ata_port_info info_6210 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &artop6210_ops, }; static const struct ata_port_info info_626x = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &artop6260_ops, }; static const struct ata_port_info info_628x = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &artop6260_ops, }; static const struct ata_port_info info_628x_fast = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &artop6260_ops, }; diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c index ab61095..5c129f9 100644 --- a/drivers/ata/pata_at32.c +++ b/drivers/ata/pata_at32.c @@ -67,7 +67,9 @@ * * Alter PIO_MASK below according to table to set maximal PIO mode. */ -#define PIO_MASK (0x1f) +enum { + PIO_MASK = ATA_PIO4, +}; /* * Struct containing private information about device. diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 506adde..bec0b8a 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -220,9 +220,9 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x06, /* No MWDMA0 support */ - .udma_mask = 0x3F, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, .port_ops = &atiixp_port_ops }; static const struct pci_bits atiixp_enable_bits[] = { diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 1050fed..c4b47a3 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1502,7 +1502,7 @@ static struct ata_port_info bfin_port_info[] = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .mwdma_mask = 0, .udma_mask = 0, .port_ops = &bfin_pata_ops, diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 34a3942..5acf9fa 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -211,7 +211,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &cmd640_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 3167d8f..f98dffe 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -299,40 +299,40 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static const struct ata_port_info cmd_info[6] = { { /* CMD 643 - no UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 with broken UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 with working UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 rev 1 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd646r1_port_ops }, { /* CMD 648 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &cmd648_port_ops }, { /* CMD 649 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &cmd648_port_ops } diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 1186bcd..db6a969 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -158,7 +158,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi static const unsigned int ctl_port[] = { 0x3F6, 0x376 }; struct ata_port_info pi = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &cs5520_port_ops, }; const struct ata_port_info *ppi[2]; diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index bba4533..c974b05 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -298,15 +298,15 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &cs5530_port_ops }; /* The docking connector doesn't do UDMA, and it seems not MWDMA */ static const struct ata_port_info info_palmax_secondary = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &cs5530_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 8b236af..d33aa28 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -181,8 +181,8 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &cs5535_port_ops }; diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c index afed929..6da4cb4 100644 --- a/drivers/ata/pata_cs5536.c +++ b/drivers/ata/pata_cs5536.c @@ -241,8 +241,8 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &cs5536_port_ops, }; diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index d546425..8fb040b 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -124,8 +124,8 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cy82c693_port_ops }; const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index ac6392e..bd498cc 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -251,9 +251,9 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma1-2 */ - .udma_mask = 0x0f, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, /* mwdma1-2 */ + .udma_mask = ATA_UDMA3, /* UDMA 66 */ .port_ops = &efar_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 65c28e5..d7f2da1 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -336,8 +336,8 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info_hpt366 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &hpt366_port_ops }; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 4216399..81ab5700 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -753,55 +753,55 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* HPT370 - UDMA100 */ static const struct ata_port_info info_hpt370 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ static const struct ata_port_info info_hpt370a = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370a_port_ops }; /* HPT370 - UDMA100 */ static const struct ata_port_info info_hpt370_33 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ static const struct ata_port_info info_hpt370a_33 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370a_port_ops }; /* HPT371, 372 and friends - UDMA133 */ static const struct ata_port_info info_hpt372 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &hpt372_port_ops }; /* HPT374 - UDMA100, function 1 uses different prereset method */ static const struct ata_port_info info_hpt374_fn0 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt372_port_ops }; static const struct ata_port_info info_hpt374_fn1 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt374_fn1_port_ops }; diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index d5c9fd7..3d59fe0 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -441,8 +441,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* HPT372N and friends - UDMA133 */ static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &hpt3x2n_port_ops }; diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index f19cc64..7e31025 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -188,11 +188,11 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, #if defined(CONFIG_PATA_HPT3X3_DMA) /* Further debug needed */ - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, #endif .port_ops = &hpt3x3_port_ops }; diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index cf9e984..e7347db 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -297,7 +297,7 @@ static int icside_dma_init(struct pata_icside_info *info) if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { state->dma = ec->dma; - info->mwdma_mask = 0x07; /* MW0..2 */ + info->mwdma_mask = ATA_MWDMA2; } return 0; @@ -473,7 +473,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info) for (i = 0; i < info->nr_ports; i++) { struct ata_port *ap = host->ports[i]; - ap->pio_mask = 0x1f; + ap->pio_mask = ATA_PIO4; ap->mwdma_mask = info->mwdma_mask; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ops = &pata_icside_port_ops; diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 15cdb91..afa8f70 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -66,7 +66,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ap = host->ports[0]; ap->ops = &isapnp_port_ops; - ap->pio_mask = 1; + ap->pio_mask = ATA_PIO0; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index c113d7c..f156da8 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -262,8 +262,8 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, /* FIXME: want UDMA 100? */ .port_ops = &it8213_ops, }; diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index b05b86a..188bc2f 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -875,29 +875,29 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static const struct ata_port_info info_smart = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &it821x_smart_port_ops }; static const struct ata_port_info info_passthru = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &it821x_passthru_port_ops }; static const struct ata_port_info info_rdc = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &it821x_rdc_port_ops }; static const struct ata_port_info info_rdc_11 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, /* No UDMA */ .port_ops = &it821x_rdc_port_ops }; diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index b173c15..19fdecf 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -176,7 +176,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) ap = host->ports[0]; ap->ops = &ixp4xx_port_ops; - ap->pio_mask = 0x1f; /* PIO4 */ + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI; ixp4xx_setup_port(ap, data, cs0->start, cs1->start); diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 38cf1ab..3a1474a 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -136,8 +136,8 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &jmicron_ops, diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index e3bc1b4..3f830f0 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -129,7 +129,7 @@ static int qdi; /* Set to probe QDI controllers */ static int winbond; /* Set to probe Winbond controllers, give I/O port if non standard */ static int autospeed; /* Chip present which snoops speed changes */ -static int pio_mask = 0x1F; /* PIO range for autospeed devices */ +static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ /** diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 76e399b..2096fb7 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -126,8 +126,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &marvell_ops, @@ -136,8 +136,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i /* Slave possible as its magically mapped not real */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &marvell_ops, diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 50ae6d1..68d27bc 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -737,10 +737,10 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) */ prop = of_get_property(op->node, "mwdma-mode", &proplen); if ((prop) && (proplen >= 4)) - mwdma_mask = 0x7 & ((1 << (*prop + 1)) - 1); + mwdma_mask = ATA_MWDMA2 & ((1 << (*prop + 1)) - 1); prop = of_get_property(op->node, "udma-mode", &proplen); if ((prop) && (proplen >= 4)) - udma_mask = 0x7 & ((1 << (*prop + 1)) - 1); + udma_mask = ATA_UDMA2 & ((1 << (*prop + 1)) - 1); ata_irq = irq_of_parse_and_map(op->node, 0); if (ata_irq == NO_IRQ) { diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index aa576ca..b21f002 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -200,7 +200,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) the MPIIX your box goes castors up */ ap->ops = &mpiix_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index 9dc05e1..bdb2369 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -51,8 +51,8 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e .flags = ATA_FLAG_SLAVE_POSS, /* Actually we don't really care about these as the firmware deals with it */ - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, /* UDMA 133 */ .port_ops = &netcell_ops, }; diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 4dd9a3b..0fb6b1b 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -136,7 +136,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (!base) return -ENOMEM; ap->ops = &ninja32_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = base + 0x10; diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 40d411c..ca53fac 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -144,7 +144,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x0F, + .pio_mask = ATA_PIO3, .port_ops = &ns87410_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index 89bf5f8..773b159 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -346,8 +346,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &ns87415_pata_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; @@ -355,8 +355,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e #if defined(CONFIG_SUPERIO) static const struct ata_port_info info87560 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &ns87560_pata_ops, }; diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index 0fe4ef3..efe2c19 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -871,7 +871,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev) ap->private_data = cf_port; cf_port->ap = ap; ap->ops = &octeon_cf_ops; - ap->pio_mask = 0x7f; /* Support PIO 0-6 */ + ap->pio_mask = ATA_PIO6; ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING; @@ -900,7 +900,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev) ap->ioaddr.ctl_addr = cs1 + (6 << 1) + 1; octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16; - ap->mwdma_mask = 0x1f; /* Support MWDMA 0-4 */ + ap->mwdma_mask = ATA_MWDMA4; irq = platform_get_irq(pdev, 0); irq_handler = octeon_cf_interrupt; diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 2c1a91c..84ac503 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -238,8 +238,8 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma1-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &oldpiix_pata_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index e4fa4d5..99eddda 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -163,7 +163,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &opti_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 93bb6e9..86885a4 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -399,15 +399,15 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info_82c700 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &optidma_port_ops }; static const struct ata_port_info info_82c700_udma = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &optiplus_port_ops }; const struct ata_port_info *ppi[] = { &info_82c700, NULL }; diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 64b2e22..a5cbcc2 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -299,7 +299,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) ap = host->ports[p]; ap->ops = ops; - ap->pio_mask = 1; /* ISA so PIO 0 cycles */ + ap->pio_mask = ATA_PIO0; /* ISA so PIO 0 cycles */ ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = io_addr + 0x10 * p; ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index e94efcc..ca5cad0 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -152,18 +152,18 @@ static struct ata_port_info pdc2027x_port_info[] = { { .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &pdc2027x_pata100_ops, }, /* PDC_UDMA_133 */ { .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA6, /* udma0-6 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &pdc2027x_pata133_ops, }, }; diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 799a6a0..5fedb3d 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -291,22 +291,22 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id static const struct ata_port_info info[3] = { { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &pdc2024x_port_ops }, { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &pdc2026x_port_ops }, { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &pdc2026x_port_ops } diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index f1b26f7..45879dc 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -212,11 +212,11 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i if (type == 6580) { ap->ops = &qdi6580_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; } else { ap->ops = &qdi6500_port_ops; - ap->pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */ + ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */ ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY; } diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 695d44a..1956d5c 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -216,9 +216,9 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma1-2 */ - .udma_mask = 0x14, /* UDMA33/66 only */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, /* mwdma1-2 */ + .udma_mask = ATA_UDMA24_ONLY, .port_ops = &radisys_pata_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index fbfee1b..2f3b49c 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -89,7 +89,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah) ap = ah->ports[0]; ap->ops = &rb532_pata_port_ops; - ap->pio_mask = 0x1f; /* PIO4 */ + ap->pio_mask = ATA_PIO4; ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE; diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 46d6bc1..0c574c0 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -88,7 +88,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &rz1000_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 9a4bdca..36a0c35 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -205,9 +205,9 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &sc1200_port_ops }; /* Can't enable port 2 yet, see top comments */ diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index d447f1c..4257d6b 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -1001,8 +1001,8 @@ static struct ata_port_operations scc_pata_ops = { static struct ata_port_info scc_port_info[] = { { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x00, + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &scc_pata_ops, }, diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c index 6aeeeeb..99cceb45 100644 --- a/drivers/ata/pata_sch.c +++ b/drivers/ata/pata_sch.c @@ -84,9 +84,9 @@ static struct ata_port_operations sch_pata_ops = { static struct ata_port_info sch_port_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = ATA_PIO4, /* pio0-4 */ - .mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sch_pata_ops, }; diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 8d2fd9d..beaed12 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -398,26 +398,26 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id static const struct ata_port_info info[4] = { { /* OSB4 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &serverworks_osb4_port_ops }, { /* OSB4 no UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x00, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ .port_ops = &serverworks_osb4_port_ops }, { /* CSB5 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &serverworks_csb_port_ops }, { /* CSB5 - later revisions*/ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &serverworks_csb_port_ops } diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 9e764e5..4cb649d 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -282,15 +282,15 @@ static int __devinit sil680_init_one(struct pci_dev *pdev, { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &sil680_port_ops }; static const struct ata_port_info info_slow = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil680_port_ops }; diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 27ceb42..488e77b 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -552,51 +552,57 @@ static struct ata_port_operations sis_old_ops = { static const struct ata_port_info sis_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, - .udma_mask = 0, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ .port_ops = &sis_old_ops, }; static const struct ata_port_info sis_info33 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA2, /* UDMA 33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &sis_old_ops, }; static const struct ata_port_info sis_info66 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA4, .port_ops = &sis_66_ops, }; static const struct ata_port_info sis_info100 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA5, .port_ops = &sis_100_ops, }; static const struct ata_port_info sis_info100_early = { .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA5, - .pio_mask = 0x1f, /* pio0-4 */ .port_ops = &sis_66_ops, }; static const struct ata_port_info sis_info133 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_ops, }; const struct ata_port_info sis_info133_for_sata = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_for_sata_ops, }; static const struct ata_port_info sis_info133_early = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_early_ops, }; diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 1b0e7b6..29f733c 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -283,13 +283,13 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id { static const struct ata_port_info info_dma = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &sl82c105_port_ops }; static const struct ata_port_info info_early = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &sl82c105_port_ops }; /* for now use only the first port */ diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index ef95975..f1f13ff 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -191,8 +191,8 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &triflex_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index ba556d3..b08e6e0 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -422,46 +422,46 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Early VIA without UDMA support */ static const struct ata_port_info via_mwdma_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &via_port_ops }; /* Ditto with IRQ masking required */ static const struct ata_port_info via_mwdma_info_borked = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &via_port_ops_noirq, }; /* VIA UDMA 33 devices (and borked 66) */ static const struct ata_port_info via_udma33_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &via_port_ops }; /* VIA UDMA 66 devices */ static const struct ata_port_info via_udma66_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &via_port_ops }; /* VIA UDMA 100 devices */ static const struct ata_port_info via_udma100_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &via_port_ops }; /* UDMA133 with bad AST (All current 133) */ static const struct ata_port_info via_udma133_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */ .port_ops = &via_port_ops }; diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 319e164..6d8619b 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -193,7 +193,7 @@ static __init int winbond_init_one(unsigned long port) ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); ap->ops = &winbond_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; ap->ioaddr.altstatus_addr = ctl_addr; diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index be53545..c509c20 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -166,7 +166,7 @@ static struct ata_port_info adma_port_info[] = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x10, /* pio4 */ + .pio_mask = ATA_PIO4_ONLY, .udma_mask = ATA_UDMA4, .port_ops = &adma_ata_ops, }, diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 55bc88c..c2e90e1 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1279,8 +1279,8 @@ static struct ata_port_operations sata_fsl_ops = { static const struct ata_port_info sata_fsl_port_info[] = { { .flags = SATA_FSL_HOST_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .udma_mask = 0x7f, /* udma 0-6 */ + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, .port_ops = &sata_fsl_ops, }, }; diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index fbbd87c..305a4f8 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -744,8 +744,8 @@ static struct ata_port_operations inic_port_ops = { static struct ata_port_info inic_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &inic_port_ops }; diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index f65b537..2f523f8 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -57,9 +57,9 @@ enum { NV_MMIO_BAR = 5, NV_PORTS = 2, - NV_PIO_MASK = 0x1f, - NV_MWDMA_MASK = 0x07, - NV_UDMA_MASK = 0x7f, + NV_PIO_MASK = ATA_PIO4, + NV_MWDMA_MASK = ATA_MWDMA2, + NV_UDMA_MASK = ATA_UDMA6, NV_PORT0_SCR_REG_OFFSET = 0x00, NV_PORT1_SCR_REG_OFFSET = 0x40, diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index ba9a257..3ad2b88 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -213,8 +213,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_SATA_PATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_old_sata_ops, }, @@ -222,8 +222,8 @@ static const struct ata_port_info pdc_port_info[] = { [board_2037x_pata] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_pata_ops, }, @@ -232,8 +232,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_4_PORTS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_old_sata_ops, }, @@ -242,8 +242,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_4_PORTS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_pata_ops, }, @@ -252,8 +252,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_sata_ops, }, @@ -262,8 +262,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_GEN_II, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_pata_ops, }, @@ -272,8 +272,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_sata_ops, }, diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index a000c86..7112d89 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -160,7 +160,7 @@ static const struct ata_port_info qs_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x10, /* pio4 */ + .pio_mask = ATA_PIO4_ONLY, .udma_mask = ATA_UDMA6, .port_ops = &qs_ata_ops, }, diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index d009160..e67ce8e 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -200,8 +200,8 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, @@ -209,24 +209,24 @@ static const struct ata_port_info sil_port_info[] = { { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | SIL_FLAG_NO_SATA_IRQ, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, /* sil_3512 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, /* sil_3114 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 2590c22..0d8990d 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -429,25 +429,25 @@ static const struct ata_port_info sil24_port_info[] = { { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | SIL24_FLAG_PCIX_IRQ_WOC, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, /* sil_3132 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, /* sil_3131/sil_3531 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, }; diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 9c43b4e..8f98332 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -97,8 +97,8 @@ static struct ata_port_operations sis_ops = { static const struct ata_port_info sis_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x7, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &sis_ops, }; diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 609d147..7257f2d 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -361,8 +361,8 @@ static const struct ata_port_info k2_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, @@ -371,8 +371,8 @@ static const struct ata_port_info k2_port_info[] = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA | K2_FLAG_SATA_8_PORTS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, @@ -380,8 +380,8 @@ static const struct ata_port_info k2_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, @@ -389,8 +389,8 @@ static const struct ata_port_info k2_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index ec04b8d..dce3dcc 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -265,8 +265,8 @@ static const struct ata_port_info pdc_port_info[] = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_20621_ops, }, diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index 019575b..e5bff47 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -89,7 +89,7 @@ static struct ata_port_operations uli_ops = { static const struct ata_port_info uli_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_IGN_SIMPLEX, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &uli_ops, }; diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5c62da9..98e8c50 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -146,24 +146,24 @@ static struct ata_port_operations vt8251_ops = { static const struct ata_port_info vt6420_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vt6420_sata_ops, }; static struct ata_port_info vt6421_sport_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vt6421_sata_ops, }; static struct ata_port_info vt6421_pport_info = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0, + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &vt6421_pata_ops, }; @@ -171,8 +171,8 @@ static struct ata_port_info vt6421_pport_info = { static struct ata_port_info vt8251_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vt8251_ops, }; diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index c57cdff..ef211f3 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -345,8 +345,8 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev, static const struct ata_port_info pi = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vsc_sata_ops, }; -- cgit v0.10.2 From aef37d8d80d8c027f03d362a97afe3f6a42bfbb4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Inge=20Bols=C3=B8?= Date: Sat, 14 Mar 2009 23:07:33 +0100 Subject: pata_radisys: fix mwdma_mask to exclude mwdma0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As noted by Alan: >Your suspicions are correct here btw - the device can only do MWDMA1 and >MWDMA2 (much like some PIIX devices) Signed-off-by: Erik Inge Bolsø Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 1956d5c..4401b33 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -217,7 +217,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, /* mwdma1-2 */ + .mwdma_mask = ATA_MWDMA12_ONLY, .udma_mask = ATA_UDMA24_ONLY, .port_ops = &radisys_pata_ops, }; -- cgit v0.10.2 From b2a034cf16a1642e647497c70c1cd9c09bf39412 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Inge=20Bols=C3=B8?= Date: Sat, 14 Mar 2009 23:08:20 +0100 Subject: pata_efar: fix *dma_mask MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to Alan: >and yes the EFAR does UDMA66. mwdma: >Yep - wrong comment. The EFAR is a sort of clone of the PIIX and I >copied the comment while EFAR don't appear to have copied the >limitation Signed-off-by: Erik Inge Bolsø Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index bd498cc..2085e0a 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -252,8 +252,8 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, /* mwdma1-2 */ - .udma_mask = ATA_UDMA3, /* UDMA 66 */ + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, .port_ops = &efar_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; -- cgit v0.10.2 From 9223d01b2fdf638a73888ad73a1784fca3454c1e Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 13 Mar 2009 15:41:43 +0100 Subject: pata-rb532-cf: platform_get_irq() fix ignored failure platform_get_irq() can return -ENXIO, but since 'irq' is an unsigned int, it does not show when the IRQ resource wasn't found. Make irq an int so that we can use a single variable to test the platform_get_irq() return value. Signed-off-by: Roel Kluin Signed-off-by: Phil Sutter Signed-off-by: Florian Fainelli Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 2f3b49c..8e3cdef 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -104,7 +104,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah) static __devinit int rb532_pata_driver_probe(struct platform_device *pdev) { - unsigned int irq; + int irq; int gpio; struct resource *res; struct ata_host *ah; -- cgit v0.10.2 From 40f21b1124a9552bc093469280eb8239dc5f73d7 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 10 Mar 2009 18:51:04 -0400 Subject: sata_mv: cosmetic preparations for IRQ coalescing Various cosmetic changes in preparation for the IRQ coalescing feature. Note that the various MV_IRQ_COAL_* definitions are restored/renamed in the folloup patch which adds IRQ coalescing to the driver. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 8cad3b2..206220e 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1,10 +1,13 @@ /* * sata_mv.c - Marvell SATA support * - * Copyright 2008: Marvell Corporation, all rights reserved. + * Copyright 2008-2009: Marvell Corporation, all rights reserved. * Copyright 2005: EMC Corporation, all rights reserved. * Copyright 2005 Red Hat, Inc. All rights reserved. * + * Originally written by Brett Russ. + * Extensive overhaul and enhancement by Mark Lord . + * * Please ALWAYS copy linux-ide@vger.kernel.org on emails. * * This program is free software; you can redistribute it and/or modify @@ -25,8 +28,6 @@ /* * sata_mv TODO list: * - * --> Errata workaround for NCQ device errors. - * * --> More errata workarounds for PCI-X. * * --> Complete a full errata audit for all chipsets to identify others. @@ -68,6 +69,16 @@ #define DRV_NAME "sata_mv" #define DRV_VERSION "1.26" +/* + * module options + */ + +static int msi; +#ifdef CONFIG_PCI +module_param(msi, int, S_IRUGO); +MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); +#endif + enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ @@ -78,12 +89,6 @@ enum { MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ MV_PCI_REG_BASE = 0, - MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ - MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08), - MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88), - MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c), - MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc), - MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0), MV_SATAHC0_REG_BASE = 0x20000, MV_FLASH_CTL_OFS = 0x1046c, @@ -115,16 +120,14 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ - MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, MV_GEN_I_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI, - MV_GEN_II_FLAGS = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ, + MV_GEN_II_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NCQ | + ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA, MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, @@ -179,16 +182,16 @@ enum { PCI_HC_MAIN_IRQ_MASK_OFS = 0x1d64, SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020, SOC_HC_MAIN_IRQ_MASK_OFS = 0x20024, - ERR_IRQ = (1 << 0), /* shift by port # */ - DONE_IRQ = (1 << 1), /* shift by port # */ + ERR_IRQ = (1 << 0), /* shift by (2 * port #) */ + DONE_IRQ = (1 << 1), /* shift by (2 * port #) */ HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ PCI_ERR = (1 << 18), - TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */ - TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */ - PORTS_0_3_COAL_DONE = (1 << 8), - PORTS_4_7_COAL_DONE = (1 << 17), - PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */ + TRAN_COAL_LO_DONE = (1 << 19), /* transaction coalescing */ + TRAN_COAL_HI_DONE = (1 << 20), /* transaction coalescing */ + PORTS_0_3_COAL_DONE = (1 << 8), /* HC0 IRQ coalescing */ + PORTS_4_7_COAL_DONE = (1 << 17), /* HC1 IRQ coalescing */ + ALL_PORTS_COAL_DONE = (1 << 21), /* GEN_II(E) IRQ coalescing */ GPIO_INT = (1 << 22), SELF_INT = (1 << 23), TWSI_INT = (1 << 24), @@ -621,7 +624,7 @@ static struct ata_port_operations mv6_ops = { .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, - .sff_check_status = mv_sff_check_status, + .sff_check_status = mv_sff_check_status, .sff_irq_clear = mv_sff_irq_clear, .check_atapi_dma = mv_check_atapi_dma, .bmdma_setup = mv_bmdma_setup, @@ -1255,8 +1258,8 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) } /** - * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma - * @ap: Port being initialized + * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma + * @ap: Port being initialized * * There are two DMA modes on these chips: basic DMA, and EDMA. * @@ -2000,7 +2003,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) struct mv_host_priv *hpriv = ap->host->private_data; /* * Workaround for 88SX60x1 FEr SATA#25 (part 2). - * + * * After any NCQ error, the READ_LOG_EXT command * from libata-eh *must* use mv_qc_issue_fis(). * Otherwise it might fail, due to chip errata. @@ -3704,12 +3707,6 @@ static struct pci_driver mv_pci_driver = { .remove = ata_pci_remove_one, }; -/* - * module options - */ -static int msi; /* Use PCI msi; either zero (off, default) or non-zero */ - - /* move to PCI layer or libata core? */ static int pci_go_64(struct pci_dev *pdev) { @@ -3891,10 +3888,5 @@ MODULE_DEVICE_TABLE(pci, mv_pci_tbl); MODULE_VERSION(DRV_VERSION); MODULE_ALIAS("platform:" DRV_NAME); -#ifdef CONFIG_PCI -module_param(msi, int, 0444); -MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); -#endif - module_init(mv_init); module_exit(mv_exit); -- cgit v0.10.2 From 2b748a0a344847fe6b924407bbe153e1878c9f09 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 10 Mar 2009 22:01:17 -0400 Subject: sata_mv: implement IRQ coalescing (v2) Add IRQ coalescing to sata_mv (off by default). This feature can reduce total interrupt overhead for RAID setups in some situations, by deferring the interrupt signal until one or both of: a) a specified io_count (completed SATA commands) is achieved, or b) a specified time interval elapses after an IO completion. For now, module parameters are used to set the irq_coalescing_io_count and irq_coalescing_usecs (timeout) globally. These may eventually be supplemented with sysfs attributes, so that thresholds can be set on-the-fly and on a per-chip (or even per-host_controller) basis. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 206220e..ef38545 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -34,10 +34,7 @@ * * --> Develop a low-power-consumption strategy, and implement it. * - * --> [Experiment, low priority] Investigate interrupt coalescing. - * Quite often, especially with PCI Message Signalled Interrupts (MSI), - * the overhead reduced by interrupt mitigation is quite often not - * worth the latency cost. + * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds. * * --> [Experiment, Marvell value added] Is it possible to use target * mode to cross-connect two Linux boxes with Marvell cards? If so, @@ -67,7 +64,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.26" +#define DRV_VERSION "1.27" /* * module options @@ -79,6 +76,16 @@ module_param(msi, int, S_IRUGO); MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); #endif +static int irq_coalescing_io_count; +module_param(irq_coalescing_io_count, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_io_count, + "IRQ coalescing I/O count threshold (0..255)"); + +static int irq_coalescing_usecs; +module_param(irq_coalescing_usecs, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_usecs, + "IRQ coalescing time threshold in usecs"); + enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ @@ -88,8 +95,33 @@ enum { MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ + /* For use with both IRQ coalescing methods ("all ports" or "per-HC" */ + COAL_CLOCKS_PER_USEC = 150, /* for calculating COAL_TIMEs */ + MAX_COAL_TIME_THRESHOLD = ((1 << 24) - 1), /* internal clocks count */ + MAX_COAL_IO_COUNT = 255, /* completed I/O count */ + MV_PCI_REG_BASE = 0, + /* + * Per-chip ("all ports") interrupt coalescing feature. + * This is only for GEN_II / GEN_IIE hardware. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + MV_COAL_REG_BASE = 0x18000, + MV_IRQ_COAL_CAUSE = (MV_COAL_REG_BASE + 0x08), + ALL_PORTS_COAL_IRQ = (1 << 4), /* all ports irq event */ + + MV_IRQ_COAL_IO_THRESHOLD = (MV_COAL_REG_BASE + 0xcc), + MV_IRQ_COAL_TIME_THRESHOLD = (MV_COAL_REG_BASE + 0xd0), + + /* + * Registers for the (unused here) transaction coalescing feature: + */ + MV_TRAN_COAL_CAUSE_LO = (MV_COAL_REG_BASE + 0x88), + MV_TRAN_COAL_CAUSE_HI = (MV_COAL_REG_BASE + 0x8c), + MV_SATAHC0_REG_BASE = 0x20000, MV_FLASH_CTL_OFS = 0x1046c, MV_GPIO_PORT_CTL_OFS = 0x104f0, @@ -186,6 +218,8 @@ enum { DONE_IRQ = (1 << 1), /* shift by (2 * port #) */ HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ + DONE_IRQ_0_3 = 0x000000aa, /* DONE_IRQ ports 0,1,2,3 */ + DONE_IRQ_4_7 = (DONE_IRQ_0_3 << HC_SHIFT), /* 4,5,6,7 */ PCI_ERR = (1 << 18), TRAN_COAL_LO_DONE = (1 << 19), /* transaction coalescing */ TRAN_COAL_HI_DONE = (1 << 20), /* transaction coalescing */ @@ -207,6 +241,16 @@ enum { HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ + /* + * Per-HC (Host-Controller) interrupt coalescing feature. + * This is present on all chip generations. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + HC_IRQ_COAL_IO_THRESHOLD_OFS = 0x000c, + HC_IRQ_COAL_TIME_THRESHOLD_OFS = 0x0010, + /* Shadow block registers */ SHD_BLK_OFS = 0x100, SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ @@ -897,6 +941,23 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); } +static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv) +{ + /* + * When writing to the main_irq_mask in hardware, + * we must ensure exclusivity between the interrupt coalescing bits + * and the corresponding individual port DONE_IRQ bits. + * + * Note that this register is really an "IRQ enable" register, + * not an "IRQ mask" register as Marvell's naming might suggest. + */ + if (mask & (ALL_PORTS_COAL_DONE | PORTS_0_3_COAL_DONE)) + mask &= ~DONE_IRQ_0_3; + if (mask & (ALL_PORTS_COAL_DONE | PORTS_4_7_COAL_DONE)) + mask &= ~DONE_IRQ_4_7; + writelfl(mask, hpriv->main_irq_mask_addr); +} + static void mv_set_main_irq_mask(struct ata_host *host, u32 disable_bits, u32 enable_bits) { @@ -907,7 +968,7 @@ static void mv_set_main_irq_mask(struct ata_host *host, new_mask = (old_mask & ~disable_bits) | enable_bits; if (new_mask != old_mask) { hpriv->main_irq_mask = new_mask; - writelfl(new_mask, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(new_mask, hpriv); } } @@ -948,6 +1009,64 @@ static void mv_clear_and_enable_port_irqs(struct ata_port *ap, mv_enable_port_irqs(ap, port_irqs); } +static void mv_set_irq_coalescing(struct ata_host *host, + unsigned int count, unsigned int usecs) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base, *hc_mmio; + u32 coal_enable = 0; + unsigned long flags; + unsigned int clks; + const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | + ALL_PORTS_COAL_DONE; + + /* Disable IRQ coalescing if either threshold is zero */ + if (!usecs || !count) { + clks = count = 0; + } else { + /* Respect maximum limits of the hardware */ + clks = usecs * COAL_CLOCKS_PER_USEC; + if (clks > MAX_COAL_TIME_THRESHOLD) + clks = MAX_COAL_TIME_THRESHOLD; + if (count > MAX_COAL_IO_COUNT) + count = MAX_COAL_IO_COUNT; + } + + spin_lock_irqsave(&host->lock, flags); + +#if 0 /* disabled pending functional clarification from Marvell */ + if (!IS_GEN_I(hpriv)) { + /* + * GEN_II/GEN_IIE: global thresholds for the entire chip. + */ + writel(clks, mmio + MV_IRQ_COAL_TIME_THRESHOLD); + writel(count, mmio + MV_IRQ_COAL_IO_THRESHOLD); + /* clear leftover coal IRQ bit */ + writelfl(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + clks = count = 0; /* so as to clear the alternate regs below */ + coal_enable = ALL_PORTS_COAL_DONE; + } +#endif + /* + * All chips: independent thresholds for each HC on the chip. + */ + hc_mmio = mv_hc_base_from_port(mmio, 0); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); + coal_enable |= PORTS_0_3_COAL_DONE; + if (hpriv->n_ports > 4) { + hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); + coal_enable |= PORTS_4_7_COAL_DONE; + } + if (!count) + coal_enable = 0; + mv_set_main_irq_mask(host, coal_disable, coal_enable); + + spin_unlock_irqrestore(&host->lock, flags); +} + /** * mv_start_edma - Enable eDMA engine * @base: port base address @@ -2500,6 +2619,10 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) void __iomem *mmio = hpriv->base, *hc_mmio; unsigned int handled = 0, port; + /* If asserted, clear the "all ports" IRQ coalescing bit */ + if (main_irq_cause & ALL_PORTS_COAL_DONE) + writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + for (port = 0; port < hpriv->n_ports; port++) { struct ata_port *ap = host->ports[port]; unsigned int p, shift, hardport, port_cause; @@ -2532,6 +2655,8 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) * to ack (only) those ports via hc_irq_cause. */ ack_irqs = 0; + if (hc_cause & PORTS_0_3_COAL_DONE) + ack_irqs = HC_COAL_IRQ; for (p = 0; p < MV_PORTS_PER_HC; ++p) { if ((port + p) >= hpriv->n_ports) break; @@ -2620,7 +2745,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) /* for MSI: block new interrupts while in here */ if (using_msi) - writel(0, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(0, hpriv); main_irq_cause = readl(hpriv->main_irq_cause_addr); pending_irqs = main_irq_cause & hpriv->main_irq_mask; @@ -2637,7 +2762,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) /* for MSI: unmask; interrupt cause bits will retrigger now */ if (using_msi) - writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(hpriv->main_irq_mask, hpriv); spin_unlock(&host->lock); @@ -3546,6 +3671,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) * The per-port interrupts get done later as ports are set up. */ mv_set_main_irq_mask(host, 0, PCI_ERR); + mv_set_irq_coalescing(host, irq_coalescing_io_count, + irq_coalescing_usecs); done: return rc; } -- cgit v0.10.2 From 6abf4678261218938ccdac90767d34ce9937634f Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 11 Mar 2009 00:56:00 -0400 Subject: sata_mv: optimize IRQ coalescing for 8-port chips Enable use of the "all ports" IRQ coalescing optimization for GEN_II / GEN_IIE chips that have dual host-controllers (8-ports). Currently only the 6081 chip qualifies, but other chips may come along someday. Rather than each half of the chip having to satisfy a local set of coalescing thresholds, use of this feature groups all ports together under a single set of thresholds. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index ef38545..4718456 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1016,7 +1016,7 @@ static void mv_set_irq_coalescing(struct ata_host *host, void __iomem *mmio = hpriv->base, *hc_mmio; u32 coal_enable = 0; unsigned long flags; - unsigned int clks; + unsigned int clks, is_dual_hc = hpriv->n_ports > MV_PORTS_PER_HC; const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | ALL_PORTS_COAL_DONE; @@ -1033,37 +1033,41 @@ static void mv_set_irq_coalescing(struct ata_host *host, } spin_lock_irqsave(&host->lock, flags); + mv_set_main_irq_mask(host, coal_disable, 0); -#if 0 /* disabled pending functional clarification from Marvell */ - if (!IS_GEN_I(hpriv)) { + if (is_dual_hc && !IS_GEN_I(hpriv)) { /* - * GEN_II/GEN_IIE: global thresholds for the entire chip. + * GEN_II/GEN_IIE with dual host controllers: + * one set of global thresholds for the entire chip. */ writel(clks, mmio + MV_IRQ_COAL_TIME_THRESHOLD); writel(count, mmio + MV_IRQ_COAL_IO_THRESHOLD); /* clear leftover coal IRQ bit */ - writelfl(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); - clks = count = 0; /* so as to clear the alternate regs below */ - coal_enable = ALL_PORTS_COAL_DONE; + writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + if (count) + coal_enable = ALL_PORTS_COAL_DONE; + clks = count = 0; /* force clearing of regular regs below */ } -#endif + /* * All chips: independent thresholds for each HC on the chip. */ hc_mmio = mv_hc_base_from_port(mmio, 0); writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); - coal_enable |= PORTS_0_3_COAL_DONE; - if (hpriv->n_ports > 4) { + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + if (count) + coal_enable |= PORTS_0_3_COAL_DONE; + if (is_dual_hc) { hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC); writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); - coal_enable |= PORTS_4_7_COAL_DONE; + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + if (count) + coal_enable |= PORTS_4_7_COAL_DONE; } - if (!count) - coal_enable = 0; - mv_set_main_irq_mask(host, coal_disable, coal_enable); + mv_set_main_irq_mask(host, 0, coal_enable); spin_unlock_irqrestore(&host->lock, flags); } -- cgit v0.10.2 From 000b344f4ca7828ee43940255c8bbb32e2c7dbec Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sun, 15 Mar 2009 11:33:19 -0400 Subject: sata_mv: fix LED blinking for SoC+NCQ For Marvell SoC chips, the HDD LED does not blink when there is disk I/O if NCQ is enabled. Add a quirk that enables blink mode for the LED while NCQ is enabled on any port of a SoC host controller. Normal LED function is restored when NCQ is not enabled on any port. The code to enable the blink mode is based on earlier code and suggestions from Frans Pop, Saeed Bishara, and possibly others. Signed-off-by: Mark Lord Tested-by: Frans Pop Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 4718456..8a75105 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -251,6 +251,11 @@ enum { HC_IRQ_COAL_IO_THRESHOLD_OFS = 0x000c, HC_IRQ_COAL_TIME_THRESHOLD_OFS = 0x0010, + SOC_LED_CTRL_OFS = 0x2c, + SOC_LED_CTRL_BLINK = (1 << 0), /* Active LED blink */ + SOC_LED_CTRL_ACT_PRESENCE = (1 << 2), /* Multiplex dev presence */ + /* with dev activity LED */ + /* Shadow block registers */ SHD_BLK_OFS = 0x100, SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ @@ -411,6 +416,7 @@ enum { MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ + MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -1404,6 +1410,61 @@ static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma) mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD_OFS, old, new); } +/* + * SOC chips have an issue whereby the HDD LEDs don't always blink + * during I/O when NCQ is enabled. Enabling a special "LED blink" mode + * of the SOC takes care of it, generating a steady blink rate when + * any drive on the chip is active. + * + * Unfortunately, the blink mode is a global hardware setting for the SOC, + * so we must use it whenever at least one port on the SOC has NCQ enabled. + * + * We turn "LED blink" off when NCQ is not in use anywhere, because the normal + * LED operation works then, and provides better (more accurate) feedback. + * + * Note that this code assumes that an SOC never has more than one HC onboard. + */ +static void mv_soc_led_blink_enable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + + if (hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN) + return; + hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); + writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); +} + +static void mv_soc_led_blink_disable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + unsigned int port; + + if (!(hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN)) + return; + + /* disable led-blink only if no ports are using NCQ */ + for (port = 0; port < hpriv->n_ports; port++) { + struct ata_port *this_ap = host->ports[port]; + struct mv_port_priv *pp = this_ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) + return; + } + + hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); + writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); +} + static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) { u32 cfg; @@ -1451,6 +1512,13 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ mv_bmdma_enable_iie(ap, !want_edma); + + if (IS_SOC(hpriv)) { + if (want_ncq) + mv_soc_led_blink_enable(ap); + else + mv_soc_led_blink_disable(ap); + } } if (want_ncq) { -- cgit v0.10.2 From e18086d69cb5bb864749a0637f6ac573aa89d5ea Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Thu, 19 Mar 2009 13:32:21 -0400 Subject: [libata] More robust parsing for IDENTIFY DEVICE multi_count field Make libata more robust when parsing the multi_count field from a drive's identify data. This prevents us from attempting to use dubious multi_count values ad infinitum. Reset dev->multi_count to zero and reprobe it each time through this routine, as it can change on device reset. Also ensure that the reported "maximum" value is valid and is a power of two, and that the reported "count" value is valid and also a power of two. And that the "count" value is not greater than the "maximum" value. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d4a7b8a..e7ea77c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -57,6 +57,7 @@ #include #include #include +#include #include #include #include @@ -2389,6 +2390,7 @@ int ata_dev_configure(struct ata_device *dev) dev->cylinders = 0; dev->heads = 0; dev->sectors = 0; + dev->multi_count = 0; /* * common ATA, ATAPI feature tests @@ -2426,8 +2428,15 @@ int ata_dev_configure(struct ata_device *dev) dev->n_sectors = ata_id_n_sectors(id); - if (dev->id[59] & 0x100) - dev->multi_count = dev->id[59] & 0xff; + /* get current R/W Multiple count setting */ + if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) { + unsigned int max = dev->id[47] & 0xff; + unsigned int cnt = dev->id[59] & 0xff; + /* only recognize/allow powers of two here */ + if (is_power_of_2(max) && is_power_of_2(cnt)) + if (cnt <= max) + dev->multi_count = cnt; + } if (ata_id_has_lba(id)) { const char *lba_desc; -- cgit v0.10.2 From 208f2a886a2f6cf329c9fcbf8d29a0dd245cc763 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Fri, 20 Mar 2009 14:14:23 -0500 Subject: [libata] ahci: correct enclosure LED state save ahci_transmit_led_message saves off the led_state with a value that includes the port number OR'd in, this incorrect value maybe reported back in ahci_led_store. For instance, if you turn off all the leds for port 1 and cat the value back it will report 1 instead of 0. # echo 0 > /sys/class/scsi_host/host1/em_message # cat /sys/class/scsi_host/host1/em_message 1 Signed-off-by: David Milburn Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index ec2922a..788bba2 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1348,7 +1348,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, writel(message[1], mmio + hpriv->em_loc+4); /* save off new led state for port/slot */ - emp->led_state = message[1]; + emp->led_state = state; /* * tell hardware to transmit the message -- cgit v0.10.2 From 140d6fed71a659f39f0b130b6ac8f8d28600bf60 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 Mar 2009 10:21:49 +0000 Subject: pata_artop: Serializing support Enable both ports on the 6210 and serialize them Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 07c7fae..d332cfd 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -12,7 +12,6 @@ * performance Alessandro Zummo * * TODO - * 850 serialization once the core supports it * Investigate no_dsc on 850R * Clock detect */ @@ -29,7 +28,7 @@ #include #define DRV_NAME "pata_artop" -#define DRV_VERSION "0.4.4" +#define DRV_VERSION "0.4.5" /* * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we @@ -283,6 +282,31 @@ static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra); } +/** + * artop_6210_qc_defer - implement serialization + * @qc: command + * + * Issue commands per host on this chip. + */ + +static int artop6210_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_host *host = qc->ap->host; + struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; + int rc; + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + /* Now apply serialization rules. Only allow a command if the + other channel state machine is idle */ + if (alt && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + static struct scsi_host_template artop_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -293,6 +317,7 @@ static struct ata_port_operations artop6210_ops = { .set_piomode = artop6210_set_piomode, .set_dmamode = artop6210_set_dmamode, .prereset = artop6210_pre_reset, + .qc_defer = artop6210_qc_defer, }; static struct ata_port_operations artop6260_ops = { @@ -362,12 +387,8 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) if (id->driver_data == 0) { /* 6210 variant */ ppi[0] = &info_6210; - ppi[1] = &ata_dummy_port_info; /* BIOS may have left us in UDMA, clear it before libata probe */ pci_write_config_byte(pdev, 0x54, 0); - /* For the moment (also lacks dsc) */ - printk(KERN_WARNING "ARTOP 6210 requires serialize functionality not yet supported by libata.\n"); - printk(KERN_WARNING "Secondary ATA ports will not be activated.\n"); } else if (id->driver_data == 1) /* 6260 */ ppi[0] = &info_626x; -- cgit v0.10.2 From c0f2ee34a5a0b79fd98d965ad8ae765d4639bfa5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 Mar 2009 10:22:25 +0000 Subject: pata_sc1200: Activate secondary channel Implement serialize and turn on slave channel Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 36a0c35..f49814d 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -2,7 +2,6 @@ * New ATA layer SC1200 driver Alan Cox * * TODO: Mode selection filtering - * TODO: Can't enable second channel until ATA core has serialize * TODO: Needs custom DMA cleanup code * * Based very heavily on @@ -178,6 +177,31 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc) return ata_sff_qc_issue(qc); } +/** + * sc1200_qc_defer - implement serialization + * @qc: command + * + * Serialize command issue on this controller. + */ + +static int sc1200_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_host *host = qc->ap->host; + struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; + int rc; + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + /* Now apply serialization rules. Only allow a command if the + other channel state machine is idle */ + if (alt && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + static struct scsi_host_template sc1200_sht = { ATA_BMDMA_SHT(DRV_NAME), .sg_tablesize = LIBATA_DUMB_MAX_PRD, @@ -187,6 +211,7 @@ static struct ata_port_operations sc1200_port_ops = { .inherits = &ata_bmdma_port_ops, .qc_prep = ata_sff_dumb_qc_prep, .qc_issue = sc1200_qc_issue, + .qc_defer = sc1200_qc_defer, .cable_detect = ata_cable_40wire, .set_piomode = sc1200_set_piomode, .set_dmamode = sc1200_set_dmamode, @@ -211,7 +236,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &sc1200_port_ops }; /* Can't enable port 2 yet, see top comments */ - const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + const struct ata_port_info *ppi[] = { &info, }; return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL); } -- cgit v0.10.2 From 3d47aa8e7e7b2aa09256590388aa8dddc79280f9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 Mar 2009 10:23:19 +0000 Subject: [libata] Drain data on errors If the device is signalling that there is data to drain after an error we should read the bytes out and throw them away. Without this some devices and controllers get wedged and don't recover. Based on earlier work by Mark Lord Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index f93dc02..9a10cb0 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -52,6 +52,7 @@ const struct ata_port_operations ata_sff_port_ops = { .softreset = ata_sff_softreset, .hardreset = sata_sff_hardreset, .postreset = ata_sff_postreset, + .drain_fifo = ata_sff_drain_fifo, .error_handler = ata_sff_error_handler, .post_internal_cmd = ata_sff_post_internal_cmd, @@ -2199,6 +2200,39 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes) EXPORT_SYMBOL_GPL(ata_sff_postreset); /** + * ata_sff_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is neccessary before a + * reset will recover the device. + * + */ + +void ata_sff_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count < 32768; count++) + ioread16(ap->ioaddr.data_addr); + + /* Can become DEBUG later */ + if (count) + ata_port_printk(ap, KERN_DEBUG, + "drained %d bytes to clear DRQ.\n", count); + +} +EXPORT_SYMBOL_GPL(ata_sff_drain_fifo); + +/** * ata_sff_error_handler - Stock error handler for BMDMA controller * @ap: port to handle error for * @@ -2239,7 +2273,8 @@ void ata_sff_error_handler(struct ata_port *ap) * really a timeout event, adjust error mask and * cancel frozen state. */ - if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) { + if (qc->err_mask == AC_ERR_TIMEOUT + && (host_stat & ATA_DMA_ERR)) { qc->err_mask = AC_ERR_HOST_BUS; thaw = 1; } @@ -2250,6 +2285,13 @@ void ata_sff_error_handler(struct ata_port *ap) ata_sff_sync(ap); /* FIXME: We don't need this */ ap->ops->sff_check_status(ap); ap->ops->sff_irq_clear(ap); + /* We *MUST* do FIFO draining before we issue a reset as several + * devices helpfully clear their internal state and will lock solid + * if we touch the data port post reset. Pass qc in case anyone wants + * to do different PIO/DMA recovery or has per command fixups + */ + if (ap->ops->drain_fifo) + ap->ops->drain_fifo(qc); spin_unlock_irqrestore(ap->lock, flags); @@ -2959,4 +3001,3 @@ out: EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); #endif /* CONFIG_PCI */ - diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index a5cbcc2..f4d009e 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.5" /* * Private data structure to glue stuff together @@ -126,6 +126,37 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev, return buflen; } +/** + * pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is neccessary before a + * reset will recover the device. + * + */ + +void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count++ < 65536;) + ioread8(ap->ioaddr.data_addr); + + if (count) + ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n", + count); + +} static struct scsi_host_template pcmcia_sht = { ATA_PIO_SHT(DRV_NAME), @@ -143,6 +174,7 @@ static struct ata_port_operations pcmcia_8bit_port_ops = { .sff_data_xfer = ata_data_xfer_8bit, .cable_detect = ata_cable_40wire, .set_mode = pcmcia_set_mode_8bit, + .drain_fifo = pcmcia_8bit_drain_fifo, }; #define CS_CHECK(fn, ret) \ diff --git a/include/linux/libata.h b/include/linux/libata.h index 19af7d2..3a07a32 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -836,6 +836,8 @@ struct ata_port_operations { void (*bmdma_start)(struct ata_queued_cmd *qc); void (*bmdma_stop)(struct ata_queued_cmd *qc); u8 (*bmdma_status)(struct ata_port *ap); + + void (*drain_fifo)(struct ata_queued_cmd *qc); #endif /* CONFIG_ATA_SFF */ ssize_t (*em_show)(struct ata_port *ap, char *buf); @@ -1587,6 +1589,7 @@ extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes, extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes); +extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc); extern void ata_sff_error_handler(struct ata_port *ap); extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern int ata_sff_port_start(struct ata_port *ap); -- cgit v0.10.2 From c96f1732e25362d10ee7bcac1df8412a2e6b7d23 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 Mar 2009 10:23:46 +0000 Subject: [libata] Improve timeout handling On a timeout call a device specific handler early in the recovery so that we can complete and process successful commands which timed out due to IRQ loss or the like rather more elegantly. [Revised to exclude the timeout handling on a few devices that inherit from SFF but are not SFF enough to use the default timeout handler] Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index ea89091..0183131 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -547,7 +547,7 @@ void ata_scsi_error(struct Scsi_Host *host) /* For new EH, all qcs are finished in one of three ways - * normal completion, error completion, and SCSI timeout. - * Both cmpletions can race against SCSI timeout. When normal + * Both completions can race against SCSI timeout. When normal * completion wins, the qc never reaches EH. When error * completion wins, the qc has ATA_QCFLAG_FAILED set. * @@ -562,7 +562,19 @@ void ata_scsi_error(struct Scsi_Host *host) int nr_timedout = 0; spin_lock_irqsave(ap->lock, flags); - + + /* This must occur under the ap->lock as we don't want + a polled recovery to race the real interrupt handler + + The lost_interrupt handler checks for any completed but + non-notified command and completes much like an IRQ handler. + + We then fall into the error recovery code which will treat + this as if normal completion won the race */ + + if (ap->ops->lost_interrupt) + ap->ops->lost_interrupt(ap); + list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { struct ata_queued_cmd *qc; @@ -606,6 +618,9 @@ void ata_scsi_error(struct Scsi_Host *host) ap->eh_tries = ATA_EH_MAX_TRIES; } else spin_unlock_wait(ap->lock); + + /* If we timed raced normal completion and there is nothing to + recover nr_timedout == 0 why exactly are we doing error recovery ? */ repeat: /* invoke error handler */ diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 9a10cb0..8332e97 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -65,6 +65,8 @@ const struct ata_port_operations ata_sff_port_ops = { .sff_irq_on = ata_sff_irq_on, .sff_irq_clear = ata_sff_irq_clear, + .lost_interrupt = ata_sff_lost_interrupt, + .port_start = ata_sff_port_start, }; EXPORT_SYMBOL_GPL(ata_sff_port_ops); @@ -1647,7 +1649,7 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf); * RETURNS: * One if interrupt was handled, zero if not (shared irq). */ -inline unsigned int ata_sff_host_intr(struct ata_port *ap, +unsigned int ata_sff_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) { struct ata_eh_info *ehi = &ap->link.eh_info; @@ -1776,6 +1778,48 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) EXPORT_SYMBOL_GPL(ata_sff_interrupt); /** + * ata_sff_lost_interrupt - Check for an apparent lost interrupt + * @ap: port that appears to have timed out + * + * Called from the libata error handlers when the core code suspects + * an interrupt has been lost. If it has complete anything we can and + * then return. Interface must support altstatus for this faster + * recovery to occur. + * + * Locking: + * Caller holds host lock + */ + +void ata_sff_lost_interrupt(struct ata_port *ap) +{ + u8 status; + struct ata_queued_cmd *qc; + + /* Only one outstanding command per SFF channel */ + qc = ata_qc_from_tag(ap, ap->link.active_tag); + /* Check we have a live one.. */ + if (qc == NULL || !(qc->flags & ATA_QCFLAG_ACTIVE)) + return; + /* We cannot lose an interrupt on a polled command */ + if (qc->tf.flags & ATA_TFLAG_POLLING) + return; + /* See if the controller thinks it is still busy - if so the command + isn't a lost IRQ but is still in progress */ + status = ata_sff_altstatus(ap); + if (status & ATA_BUSY) + return; + + /* There was a command running, we are no longer busy and we have + no interrupt. */ + ata_port_printk(ap, KERN_WARNING, "lost interrupt (Status 0x%x)\n", + status); + /* Run the host interrupt logic as if the interrupt had not been + lost */ + ata_sff_host_intr(ap, qc); +} +EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt); + +/** * ata_sff_freeze - Freeze SFF controller port * @ap: port to freeze * diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index afa8f70..4bceb88 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -17,7 +17,7 @@ #include #define DRV_NAME "pata_isapnp" -#define DRV_VERSION "0.2.2" +#define DRV_VERSION "0.2.5" static struct scsi_host_template isapnp_sht = { ATA_PIO_SHT(DRV_NAME), @@ -28,6 +28,13 @@ static struct ata_port_operations isapnp_port_ops = { .cable_detect = ata_cable_40wire, }; +static struct ata_port_operations isapnp_noalt_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, + /* No altstatus so we don't want to use the lost interrupt poll */ + .lost_interrupt = ATA_OP_NULL, +}; + /** * isapnp_init_one - attach an isapnp interface * @idev: PnP device @@ -65,7 +72,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ap = host->ports[0]; - ap->ops = &isapnp_port_ops; + ap->ops = &isapnp_noalt_port_ops; ap->pio_mask = ATA_PIO0; ap->flags |= ATA_FLAG_SLAVE_POSS; @@ -76,6 +83,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev pnp_port_start(idev, 1), 1); ap->ioaddr.altstatus_addr = ctl_addr; ap->ioaddr.ctl_addr = ctl_addr; + ap->ops = &isapnp_port_ops; } ata_sff_std_ports(&ap->ioaddr); diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index c509c20..3958817 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -148,6 +148,8 @@ static struct scsi_host_template adma_ata_sht = { static struct ata_port_operations adma_ata_ops = { .inherits = &ata_sff_port_ops, + .lost_interrupt = ATA_OP_NULL, + .check_atapi_dma = adma_check_atapi_dma, .qc_prep = adma_qc_prep, .qc_issue = adma_qc_issue, diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 8a75105..a377226 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -646,6 +646,8 @@ static struct scsi_host_template mv6_sht = { static struct ata_port_operations mv5_ops = { .inherits = &ata_sff_port_ops, + .lost_interrupt = ATA_OP_NULL, + .qc_defer = mv_qc_defer, .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 2f523f8..6cda12b 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -408,6 +408,7 @@ static struct scsi_host_template nv_swncq_sht = { static struct ata_port_operations nv_common_ops = { .inherits = &ata_bmdma_port_ops, + .lost_interrupt = ATA_OP_NULL, .scr_read = nv_scr_read, .scr_write = nv_scr_write, }; diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 3ad2b88..b1fd7d6 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -176,7 +176,9 @@ static const struct ata_port_operations pdc_common_ops = { .check_atapi_dma = pdc_check_atapi_dma, .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue, + .sff_irq_clear = pdc_irq_clear, + .lost_interrupt = ATA_OP_NULL, .post_internal_cmd = pdc_post_internal_cmd, .error_handler = pdc_error_handler, diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index 7112d89..c3936d3 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -147,6 +147,7 @@ static struct ata_port_operations qs_ata_ops = { .softreset = ATA_OP_NULL, .error_handler = qs_error_handler, .post_internal_cmd = ATA_OP_NULL, + .lost_interrupt = ATA_OP_NULL, .scr_read = qs_scr_read, .scr_write = qs_scr_write, diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index ef211f3..ed70bd2 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -308,6 +308,9 @@ static struct scsi_host_template vsc_sata_sht = { static struct ata_port_operations vsc_sata_ops = { .inherits = &ata_bmdma_port_ops, + /* The IRQ handling is not quite standard SFF behaviour so we + cannot use the default lost interrupt handler */ + .lost_interrupt = ATA_OP_NULL, .sff_tf_load = vsc_sata_tf_load, .sff_tf_read = vsc_sata_tf_read, .freeze = vsc_freeze, diff --git a/include/linux/libata.h b/include/linux/libata.h index 3a07a32..76262d8 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -795,6 +795,7 @@ struct ata_port_operations { ata_reset_fn_t pmp_hardreset; ata_postreset_fn_t pmp_postreset; void (*error_handler)(struct ata_port *ap); + void (*lost_interrupt)(struct ata_port *ap); void (*post_internal_cmd)(struct ata_queued_cmd *qc); /* @@ -1577,6 +1578,7 @@ extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc); extern unsigned int ata_sff_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance); +extern void ata_sff_lost_interrupt(struct ata_port *ap); extern void ata_sff_freeze(struct ata_port *ap); extern void ata_sff_thaw(struct ata_port *ap); extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline); -- cgit v0.10.2