From 650513979a437c32d7a0a84f0ed952a55bbb5583 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sat, 16 Jun 2012 21:47:37 -0700 Subject: x86-64, reboot: Allow reboot=bios and reboot-cpu override on x86-64 With the revamped realmode trampoline code, it is trivial to extend support for reboot=bios to x86-64. Furthermore, while we are at it, remove the restriction that only we can only override the reboot CPU on 32 bits. Signed-off-by: H. Peter Anvin Link: http://lkml.kernel.org/n/tip-jopx7y6g6dbcx4tpal8q0jlr@git.kernel.org diff --git a/arch/x86/include/asm/emergency-restart.h b/arch/x86/include/asm/emergency-restart.h index cc70c1c..75ce3f4 100644 --- a/arch/x86/include/asm/emergency-restart.h +++ b/arch/x86/include/asm/emergency-restart.h @@ -4,9 +4,7 @@ enum reboot_type { BOOT_TRIPLE = 't', BOOT_KBD = 'k', -#ifdef CONFIG_X86_32 BOOT_BIOS = 'b', -#endif BOOT_ACPI = 'a', BOOT_EFI = 'e', BOOT_CF9 = 'p', diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h index fce3f4a..fe1ec5b 100644 --- a/arch/x86/include/asm/realmode.h +++ b/arch/x86/include/asm/realmode.h @@ -21,8 +21,9 @@ struct real_mode_header { u32 wakeup_header; #endif /* APM/BIOS reboot */ -#ifdef CONFIG_X86_32 u32 machine_real_restart_asm; +#ifdef CONFIG_X86_64 + u32 machine_real_restart_seg; #endif }; diff --git a/arch/x86/include/asm/reboot.h b/arch/x86/include/asm/reboot.h index 92f29706..a82c4f1 100644 --- a/arch/x86/include/asm/reboot.h +++ b/arch/x86/include/asm/reboot.h @@ -18,8 +18,8 @@ extern struct machine_ops machine_ops; void native_machine_crash_shutdown(struct pt_regs *regs); void native_machine_shutdown(void); -void machine_real_restart(unsigned int type); -/* These must match dispatch_table in reboot_32.S */ +void __noreturn machine_real_restart(unsigned int type); +/* These must match dispatch in arch/x86/realmore/rm/reboot.S */ #define MRR_BIOS 0 #define MRR_APM 1 diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 25b48ed..6ddb9cd 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -20,14 +20,12 @@ #include #include #include +#include -#ifdef CONFIG_X86_32 -# include -# include -# include -#else -# include -#endif +#include +#include +#include +#include /* * Power off function, if any @@ -49,7 +47,7 @@ int reboot_force; */ static int reboot_default = 1; -#if defined(CONFIG_X86_32) && defined(CONFIG_SMP) +#ifdef CONFIG_SMP static int reboot_cpu = -1; #endif @@ -67,8 +65,8 @@ bool port_cf9_safe = false; * reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci] * warm Don't set the cold reboot flag * cold Set the cold reboot flag - * bios Reboot by jumping through the BIOS (only for X86_32) - * smp Reboot by executing reset on BSP or other CPU (only for X86_32) + * bios Reboot by jumping through the BIOS + * smp Reboot by executing reset on BSP or other CPU * triple Force a triple fault (init) * kbd Use the keyboard controller. cold reset (default) * acpi Use the RESET_REG in the FADT @@ -95,7 +93,6 @@ static int __init reboot_setup(char *str) reboot_mode = 0; break; -#ifdef CONFIG_X86_32 #ifdef CONFIG_SMP case 's': if (isdigit(*(str+1))) { @@ -112,7 +109,6 @@ static int __init reboot_setup(char *str) #endif /* CONFIG_SMP */ case 'b': -#endif case 'a': case 'k': case 't': @@ -138,7 +134,6 @@ static int __init reboot_setup(char *str) __setup("reboot=", reboot_setup); -#ifdef CONFIG_X86_32 /* * Reboot options and system auto-detection code provided by * Dell Inc. so their systems "just work". :-) @@ -157,11 +152,8 @@ static int __init set_bios_reboot(const struct dmi_system_id *d) return 0; } -void machine_real_restart(unsigned int type) +void __noreturn machine_real_restart(unsigned int type) { - void (*restart_lowmem)(unsigned int) = (void (*)(unsigned int)) - real_mode_header->machine_real_restart_asm; - local_irq_disable(); /* @@ -181,7 +173,11 @@ void machine_real_restart(unsigned int type) /* * Switch back to the initial page table. */ +#ifdef CONFIG_X86_32 load_cr3(initial_page_table); +#else + write_cr3(real_mode_header->trampoline_pgd); +#endif /* * Write 0x1234 to absolute memory location 0x472. The BIOS reads @@ -192,14 +188,21 @@ void machine_real_restart(unsigned int type) *((unsigned short *)0x472) = reboot_mode; /* Jump to the identity-mapped low memory code */ - restart_lowmem(type); +#ifdef CONFIG_X86_32 + asm volatile("jmpl *%0" : : + "rm" (real_mode_header->machine_real_restart_asm), + "a" (type)); +#else + asm volatile("ljmpl *%0" : : + "m" (real_mode_header->machine_real_restart_asm), + "D" (type)); +#endif + unreachable(); } #ifdef CONFIG_APM_MODULE EXPORT_SYMBOL(machine_real_restart); #endif -#endif /* CONFIG_X86_32 */ - /* * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot */ @@ -223,11 +226,9 @@ static int __init set_kbd_reboot(const struct dmi_system_id *d) } /* - * This is a single dmi_table handling all reboot quirks. Note that - * REBOOT_BIOS is only available for 32bit + * This is a single dmi_table handling all reboot quirks. */ static struct dmi_system_id __initdata reboot_dmi_table[] = { -#ifdef CONFIG_X86_32 { /* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot, .ident = "Dell E520", @@ -377,7 +378,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "P4S800"), }, }, -#endif /* CONFIG_X86_32 */ { /* Handle reboot issue on Acer Aspire one */ .callback = set_kbd_reboot, @@ -576,13 +576,11 @@ static void native_machine_emergency_restart(void) reboot_type = BOOT_KBD; break; -#ifdef CONFIG_X86_32 case BOOT_BIOS: machine_real_restart(MRR_BIOS); reboot_type = BOOT_KBD; break; -#endif case BOOT_ACPI: acpi_reboot(); @@ -624,12 +622,10 @@ void native_machine_shutdown(void) /* The boot cpu is always logical cpu 0 */ int reboot_cpu_id = 0; -#ifdef CONFIG_X86_32 /* See if there has been given a command line override */ if ((reboot_cpu != -1) && (reboot_cpu < nr_cpu_ids) && cpu_online(reboot_cpu)) reboot_cpu_id = reboot_cpu; -#endif /* Make certain the cpu I'm about to reboot on is online */ if (!cpu_online(reboot_cpu_id)) diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index 5b84a2d..b2d534c 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -22,7 +22,7 @@ wakeup-objs += video-bios.o realmode-y += header.o realmode-y += trampoline_$(BITS).o realmode-y += stack.o -realmode-$(CONFIG_X86_32) += reboot_32.o +realmode-y += reboot.o realmode-$(CONFIG_ACPI_SLEEP) += $(wakeup-objs) targets += $(realmode-y) diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S index fadf483..a28221d 100644 --- a/arch/x86/realmode/rm/header.S +++ b/arch/x86/realmode/rm/header.S @@ -6,6 +6,7 @@ #include #include +#include #include "realmode.h" @@ -28,8 +29,9 @@ GLOBAL(real_mode_header) .long pa_wakeup_header #endif /* APM/BIOS reboot */ -#ifdef CONFIG_X86_32 .long pa_machine_real_restart_asm +#ifdef CONFIG_X86_64 + .long __KERNEL32_CS #endif END(real_mode_header) diff --git a/arch/x86/realmode/rm/reboot.S b/arch/x86/realmode/rm/reboot.S new file mode 100644 index 0000000..6bf8fea --- /dev/null +++ b/arch/x86/realmode/rm/reboot.S @@ -0,0 +1,152 @@ +#include +#include +#include +#include +#include +#include +#include "realmode.h" + +/* + * The following code and data reboots the machine by switching to real + * mode and jumping to the BIOS reset entry point, as if the CPU has + * really been reset. The previous version asked the keyboard + * controller to pulse the CPU reset line, which is more thorough, but + * doesn't work with at least one type of 486 motherboard. It is easy + * to stop this code working; hence the copious comments. + * + * This code is called with the restart type (0 = BIOS, 1 = APM) in + * the primary argument register (%eax for 32 bit, %edi for 64 bit). + */ + .section ".text32", "ax" + .code32 +ENTRY(machine_real_restart_asm) + +#ifdef CONFIG_X86_64 + + /* Disable paging to drop us out of long mode */ + movl %cr0, %eax + andl $~X86_CR0_PG, %eax + movl %eax, %cr0 + jmp 1f /* "A branch" may be needed here, assume near is OK */ + +1: + xorl %eax, %eax + xorl %edx, %edx + movl $MSR_EFER, %ecx + wrmsr + + movl %edi, %eax + +#endif /* CONFIG_X86_64 */ + + /* Set up the IDT for real mode. */ + lidtl pa_machine_real_restart_idt + + /* + * Set up a GDT from which we can load segment descriptors for real + * mode. The GDT is not used in real mode; it is just needed here to + * prepare the descriptors. + */ + lgdtl pa_machine_real_restart_gdt + + /* + * Load the data segment registers with 16-bit compatible values + */ + movl $16, %ecx + movl %ecx, %ds + movl %ecx, %es + movl %ecx, %fs + movl %ecx, %gs + movl %ecx, %ss + ljmpw $8, $1f + +/* + * This is 16-bit protected mode code to disable paging and the cache, + * switch to real mode and jump to the BIOS reset code. + * + * The instruction that switches to real mode by writing to CR0 must be + * followed immediately by a far jump instruction, which set CS to a + * valid value for real mode, and flushes the prefetch queue to avoid + * running instructions that have already been decoded in protected + * mode. + * + * Clears all the flags except ET, especially PG (paging), PE + * (protected-mode enable) and TS (task switch for coprocessor state + * save). Flushes the TLB after paging has been disabled. Sets CD and + * NW, to disable the cache on a 486, and invalidates the cache. This + * is more like the state of a 486 after reset. I don't know if + * something else should be done for other chips. + * + * More could be done here to set up the registers as if a CPU reset had + * occurred; hopefully real BIOSs don't assume much. This is not the + * actual BIOS entry point, anyway (that is at 0xfffffff0). + * + * Most of this work is probably excessive, but it is what is tested. + */ + .text + .code16 + + .balign 16 +machine_real_restart_asm16: +1: + xorl %ecx, %ecx + movl %cr0, %edx + andl $0x00000011, %edx + orl $0x60000000, %edx + movl %edx, %cr0 + movl %ecx, %cr3 + movl %cr0, %edx + testl $0x60000000, %edx /* If no cache bits -> no wbinvd */ + jz 2f + wbinvd +2: + andb $0x10, %dl + movl %edx, %cr0 + LJMPW_RM(3f) +3: + andw %ax, %ax + jz bios + +apm: + movw $0x1000, %ax + movw %ax, %ss + movw $0xf000, %sp + movw $0x5307, %ax + movw $0x0001, %bx + movw $0x0003, %cx + int $0x15 + /* This should never return... */ + +bios: + ljmpw $0xf000, $0xfff0 + + .section ".rodata", "a" + + .balign 16 +GLOBAL(machine_real_restart_idt) + .word 0xffff /* Length - real mode default value */ + .long 0 /* Base - real mode default value */ +END(machine_real_restart_idt) + + .balign 16 +GLOBAL(machine_real_restart_gdt) + /* Self-pointer */ + .word 0xffff /* Length - real mode default value */ + .long pa_machine_real_restart_gdt + .word 0 + + /* + * 16-bit code segment pointing to real_mode_seg + * Selector value 8 + */ + .word 0xffff /* Limit */ + .long 0x9b000000 + pa_real_mode_base + .word 0 + + /* + * 16-bit data segment with the selector value 16 = 0x10 and + * base value 0x100; since this is consistent with real mode + * semantics we don't have to reload the segments once CR0.PE = 0. + */ + .quad GDT_ENTRY(0x0093, 0x100, 0xffff) +END(machine_real_restart_gdt) diff --git a/arch/x86/realmode/rm/reboot_32.S b/arch/x86/realmode/rm/reboot_32.S deleted file mode 100644 index 1140448..0000000 --- a/arch/x86/realmode/rm/reboot_32.S +++ /dev/null @@ -1,132 +0,0 @@ -#include -#include -#include -#include -#include "realmode.h" - -/* - * The following code and data reboots the machine by switching to real - * mode and jumping to the BIOS reset entry point, as if the CPU has - * really been reset. The previous version asked the keyboard - * controller to pulse the CPU reset line, which is more thorough, but - * doesn't work with at least one type of 486 motherboard. It is easy - * to stop this code working; hence the copious comments. - * - * This code is called with the restart type (0 = BIOS, 1 = APM) in %eax. - */ - .section ".text32", "ax" - .code32 - - .balign 16 -ENTRY(machine_real_restart_asm) - /* Set up the IDT for real mode. */ - lidtl pa_machine_real_restart_idt - - /* - * Set up a GDT from which we can load segment descriptors for real - * mode. The GDT is not used in real mode; it is just needed here to - * prepare the descriptors. - */ - lgdtl pa_machine_real_restart_gdt - - /* - * Load the data segment registers with 16-bit compatible values - */ - movl $16, %ecx - movl %ecx, %ds - movl %ecx, %es - movl %ecx, %fs - movl %ecx, %gs - movl %ecx, %ss - ljmpw $8, $1f - -/* - * This is 16-bit protected mode code to disable paging and the cache, - * switch to real mode and jump to the BIOS reset code. - * - * The instruction that switches to real mode by writing to CR0 must be - * followed immediately by a far jump instruction, which set CS to a - * valid value for real mode, and flushes the prefetch queue to avoid - * running instructions that have already been decoded in protected - * mode. - * - * Clears all the flags except ET, especially PG (paging), PE - * (protected-mode enable) and TS (task switch for coprocessor state - * save). Flushes the TLB after paging has been disabled. Sets CD and - * NW, to disable the cache on a 486, and invalidates the cache. This - * is more like the state of a 486 after reset. I don't know if - * something else should be done for other chips. - * - * More could be done here to set up the registers as if a CPU reset had - * occurred; hopefully real BIOSs don't assume much. This is not the - * actual BIOS entry point, anyway (that is at 0xfffffff0). - * - * Most of this work is probably excessive, but it is what is tested. - */ - .text - .code16 - - .balign 16 -machine_real_restart_asm16: -1: - xorl %ecx, %ecx - movl %cr0, %edx - andl $0x00000011, %edx - orl $0x60000000, %edx - movl %edx, %cr0 - movl %ecx, %cr3 - movl %cr0, %edx - testl $0x60000000, %edx /* If no cache bits -> no wbinvd */ - jz 2f - wbinvd -2: - andb $0x10, %dl - movl %edx, %cr0 - LJMPW_RM(3f) -3: - andw %ax, %ax - jz bios - -apm: - movw $0x1000, %ax - movw %ax, %ss - movw $0xf000, %sp - movw $0x5307, %ax - movw $0x0001, %bx - movw $0x0003, %cx - int $0x15 - /* This should never return... */ - -bios: - ljmpw $0xf000, $0xfff0 - - .section ".rodata", "a" - - .balign 16 -GLOBAL(machine_real_restart_idt) - .word 0xffff /* Length - real mode default value */ - .long 0 /* Base - real mode default value */ -END(machine_real_restart_idt) - - .balign 16 -GLOBAL(machine_real_restart_gdt) - /* Self-pointer */ - .word 0xffff /* Length - real mode default value */ - .long pa_machine_real_restart_gdt - .word 0 - - /* - * 16-bit code segment pointing to real_mode_seg - * Selector value 8 - */ - .word 0xffff /* Limit */ - .long 0x9b000000 + pa_real_mode_base - .word 0 - - /* - * 16-bit data segment with the selector value 16 = 0x10 and - * base value 0x100; since this is consistent with real mode - * semantics we don't have to reload the segments once CR0.PE = 0. - */ - .quad GDT_ENTRY(0x0093, 0x100, 0xffff) -END(machine_real_restart_gdt) -- cgit v0.10.2