From 90abdc3b973229bae98dd96649d9f7106cc177a4 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 24 Jul 2010 17:23:51 +0200 Subject: pcmcia: do not use io_req_t when calling pcmcia_request_io() Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch Acked-by: Marcel Holtmann (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index ff5f0be..26c0f9c 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,4 +1,11 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* pcmcia_request_io changes (as of 2.6.36) + Instead of io_req_t, drivers are now requested to fill out + struct pcmcia_device *p_dev->resource[0,1] for up to two ioport + ranges. After a call to pcmcia_request_io(), the ports found there + are reserved, after calling pcmcia_request_configuration(), they may + be used. + * No dev_info_t, no cs_types.h (as of 2.6.36) dev_info_t and a few other typedefs are removed. No longer use them in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 1fcd065..e944aa0 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -200,21 +200,23 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + pdev->resource[0]->start = io->win[0].base; + if (!(io->flags & CISTPL_IO_16BIT)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + } if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = 8; + pdev->resource[1]->start = io->win[1].base; + pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = io->win[0].len; + pdev->resource[1]->end = 0; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[0]->start + 0x0e; } else @@ -245,9 +247,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) struct ata_port_operations *ops = &pcmcia_port_ops; /* Set up attributes in order to probe card and get resources */ - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - pdev->io.IOAddrLines = 3; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; pdev->conf.Attributes = CONF_ENABLE_IRQ; pdev->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 24d2007..d52e90a5 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -865,9 +865,6 @@ static int bluecard_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; - link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -890,12 +887,14 @@ static int bluecard_config(struct pcmcia_device *link) int i, n; link->conf.ConfigIndex = 0x20; - link->io.NumPorts1 = 64; - link->io.IOAddrLines = 6; + + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 64; + link->io_lines = 6; for (n = 0; n < 0x400; n += 0x40) { - link->io.BasePort1 = n ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = n ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 8ab494c..7ab8f29 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -657,8 +657,8 @@ static int bt3c_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -683,14 +683,14 @@ static int bt3c_check_config(struct pcmcia_device *p_dev, { unsigned long try = (unsigned long) priv_data; + p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = (try == 0) ? 16 : - cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -707,9 +707,9 @@ static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { for (j = 0; j < 5; j++) { - p_dev->io.BasePort1 = base[j]; - p_dev->io.IOAddrLines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 7e770d4..1c4f5e8 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -586,8 +586,8 @@ static int btuart_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -612,14 +612,14 @@ static int btuart_check_config(struct pcmcia_device *p_dev, { int *try = priv_data; + p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = (*try == 0) ? 16 : - cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -636,9 +636,9 @@ static int btuart_check_config_notpicky(struct pcmcia_device *p_dev, if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { for (j = 0; j < 5; j++) { - p_dev->io.BasePort1 = base[j]; - p_dev->io.IOAddrLines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index bfe9313..18ecc57 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -572,8 +572,8 @@ static int dtl1_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -597,14 +597,13 @@ static int dtl1_confcheck(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */ - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) - return 0; - } - return -ENODEV; + if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8)) + return -ENODEV; + + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[0]->end = cf->io.win[0].len; /*yo */ + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + return pcmcia_request_io(p_dev); } static int dtl1_config(struct pcmcia_device *link) @@ -613,7 +612,7 @@ static int dtl1_config(struct pcmcia_device *link) int i; /* Look for a generic full-sized window */ - link->io.NumPorts1 = 8; + link->resource[0]->end = 8; if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0) goto failed; diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 18484ed..ec73d9f 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1751,17 +1751,12 @@ static int cm4000_config_check(struct pcmcia_device *p_dev, if (!cfg->io.nwin) return -ENODEV; - /* Get the IOaddr */ - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(cfg->io.flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(cfg->io.flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + return pcmcia_request_io(p_dev); } static int cm4000_config(struct pcmcia_device * link, int devno) diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index a6bbf19..815cde1 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -527,16 +527,12 @@ static int cm4040_config_check(struct pcmcia_device *p_dev, return -ENODEV; /* Get the IOaddr */ - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(cfg->io.flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(cfg->io.flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - - rc = pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + rc = pcmcia_request_io(p_dev); + dev_printk(KERN_INFO, &p_dev->dev, "pcmcia_request_io returned 0x%x\n", rc); return rc; @@ -548,10 +544,6 @@ static int reader_config(struct pcmcia_device *link, int devno) struct reader_dev *dev; int fail_rc; - link->io.BasePort2 = 0; - link->io.NumPorts2 = 0; - link->io.Attributes2 = 0; - if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 9467994..5f87b9f 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -88,15 +88,15 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, memreq_t memreq_common_memory; int ret; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.IOAddrLines = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; /* 0x40 causes it to generate level mode interrupts. */ /* 0x04 enables IREQ pin. */ p_dev->conf.ConfigIndex = cfg->index | 0x44; - ret = pcmcia_request_io(p_dev, &p_dev->io); + p_dev->io_lines = 16; + ret = pcmcia_request_io(p_dev); if (ret) return ret; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 8ded9b0..9ecd6be 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -571,18 +571,15 @@ static int mgslpc_ioprobe(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - if (cfg->io.nwin > 0) { - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(cfg->io.flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(cfg->io.flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - return pcmcia_request_io(p_dev, &p_dev->io); - } - return -ENODEV; + if (!cfg->io.nwin) + return -ENODEV; + + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + return pcmcia_request_io(p_dev); } static int mgslpc_config(struct pcmcia_device *link) diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 6be0e5f..2a4cb9c 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -97,9 +97,8 @@ static int ide_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = 3; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -228,22 +227,25 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + pdev->conf.ConfigIndex = cfg->index; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + pdev->resource[0]->start = io->win[0].base; + if (!(io->flags & CISTPL_IO_16BIT)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + } if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = 8; + pdev->resource[1]->start = io->win[1].base; + pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = io->win[0].len; + pdev->resource[1]->end = 0; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[0]->start + 0x0e; } else diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 7c8c51f..09b1795 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -75,9 +75,8 @@ static int avmcs_probe(struct pcmcia_device *p_dev) { /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -119,13 +118,9 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev, if (cf->io.nwin <= 0) return -ENODEV; - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.NumPorts1 = cf->io.win[0].len; - p_dev->io.NumPorts2 = 0; - printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n", - p_dev->io.BasePort1, - p_dev->io.BasePort1+p_dev->io.NumPorts1-1); - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[0]->end = cf->io.win[0].len; + return pcmcia_request_io(p_dev); } static int avmcs_config(struct pcmcia_device *link) diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 8889963..94263c2 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -78,11 +78,10 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "avma1cs_attach()\n"); /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts2 = 16; - p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->end = 16; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -126,13 +125,10 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev, if (cf->io.nwin <= 0) return -ENODEV; - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.NumPorts1 = cf->io.win[0].len; - p_dev->io.NumPorts2 = 0; - printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n", - p_dev->io.BasePort1, - p_dev->io.BasePort1+p_dev->io.NumPorts1-1); - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[0]->end = cf->io.win[0].len; + p_dev->io_lines = 5; + return pcmcia_request_io(p_dev); } diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index c10bfd3..b3c08aa 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -126,9 +126,8 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) and attributes of IO windows) are fixed by the nature of the device, and can be hard-wired here. */ - link->io.NumPorts1 = 8; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 3; + link->resource[0]->end = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -173,16 +172,18 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev, { int j; + p_dev->io_lines = 3; + if ((cf->io.nwin > 0) && cf->io.win[0].base) { printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n"); - p_dev->io.BasePort1 = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } else { printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n"); for (j = 0x2f0; j > 0x100; j -= 0x10) { - p_dev->io.BasePort1 = j; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = j; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index cecb35a..4755eb4 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -129,9 +129,8 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) /* from old sedl_cs */ /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 8; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = 3; + link->resource[0]->end = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = 0; link->conf.IntType = INT_MEMORY_AND_IO; @@ -201,23 +200,22 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + p_dev->io_lines = 3; + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 3787fc7..7296102 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -106,9 +106,8 @@ static int __devinit teles_probe(struct pcmcia_device *link) and attributes of IO windows) are fixed by the nature of the device, and can be hard-wired here. */ - link->io.NumPorts1 = 96; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 96; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -153,16 +152,18 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev, { int j; + p_dev->io_lines = 5; + if ((cf->io.nwin > 0) && cf->io.win[0].base) { printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); - p_dev->io.BasePort1 = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } else { printk(KERN_INFO "(teles_cs: looks like the 97 model)\n"); for (j = 0x2f0; j > 0x100; j -= 0x10) { - p_dev->io.BasePort1 = j; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = j; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index b5ea9b8..c683f77 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -278,8 +278,8 @@ static int tc574_probe(struct pcmcia_device *link) lp->p_dev = link; spin_lock_init(&lp->window_lock); - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -337,10 +337,11 @@ static int tc574_config(struct pcmcia_device *link) dev_dbg(&link->dev, "3c574_config()\n"); - link->io.IOAddrLines = 16; + link->io_lines = 16; + for (i = j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 122ef4a..61f9cf2 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -213,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link) lp->p_dev = link; spin_lock_init(&lp->lock); - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -277,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link) "3Com card??\n"); multi = (link->card_id == PRODID_3COM_3C562); + link->io_lines = 16; + /* For the 3c562, the base address must be xx00-xx7f */ - link->io.IOAddrLines = 16; for (i = j = 0; j < 0x400; j += 0x10) { if (multi && (j & 0x80)) continue; - link->io.BasePort1 = j ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index c52fdf3..5f05ffb 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -259,28 +259,30 @@ static int get_prom(struct pcmcia_device *link) static int try_io_port(struct pcmcia_device *link) { int j, ret; - if (link->io.NumPorts1 == 32) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + if (link->resource[0]->end == 32) { + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* for master/slave multifunction cards */ - if (link->io.NumPorts2 > 0) - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + if (link->resource[1]->end > 0) + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } else { /* This should be two 16-port windows */ - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } - if (link->io.BasePort1 == 0) { - link->io.IOAddrLines = 16; + if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - link->io.BasePort2 = (j ^ 0x300) + 0x10; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + link->resource[1]->start = (j ^ 0x300) + 0x10; + link->io_lines = 16; + ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { - return pcmcia_request_io(link, &link->io); + return pcmcia_request_io(link); } } @@ -301,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev, network function with window 0, and serial with window 1 */ if (io->nwin > 1) { i = (io->win[1].len > io->win[0].len); - p_dev->io.BasePort2 = io->win[1-i].base; - p_dev->io.NumPorts2 = io->win[1-i].len; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; } else { - i = p_dev->io.NumPorts2 = 0; + i = p_dev->resource[1]->end = 0; } - p_dev->io.BasePort1 = io->win[i].base; - p_dev->io.NumPorts1 = io->win[i].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); return -ENODEV; diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 3b53818..3c400cf 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -158,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev) /* fill in our module parameters as defaults */ dev->dev_addr[0] = node; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts1 = 16; - p_dev->io.IOAddrLines = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -245,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link) dev_dbg(&link->dev, "com20020_config\n"); - dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1); + dev_dbg(&link->dev, "baseport1 is %Xh\n", + (unsigned int) link->resource[0]->start); + i = -ENODEV; - if (!link->io.BasePort1) + link->io_lines = 16; + + if (!link->resource[0]->start) { for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) { - link->io.BasePort1 = ioaddr; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = ioaddr; + i = pcmcia_request_io(link); if (i == 0) break; } } else - i = pcmcia_request_io(link, &link->io); + i = pcmcia_request_io(link); if (i != 0) { diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index bba6369..69930448 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -248,9 +248,8 @@ static int fmvj18x_probe(struct pcmcia_device *link) lp->base = NULL; /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; @@ -288,13 +287,13 @@ static int mfc_try_io_port(struct pcmcia_device *link) { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; for (i = 0; i < 5; i++) { - link->io.BasePort2 = serial_base[i]; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - if (link->io.BasePort2 == 0) { - link->io.NumPorts2 = 0; + link->resource[1]->start = serial_base[i]; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + if (link->resource[1]->start == 0) { + link->resource[1]->end = 0; printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n"); } - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret == 0) return ret; } @@ -310,8 +309,8 @@ static int ungermann_try_io_port(struct pcmcia_device *link) 0x380,0x3c0 only for ioport. */ for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) { - link->io.BasePort1 = ioaddr; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = ioaddr; + ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ link->conf.ConfigIndex = @@ -345,6 +344,8 @@ static int fmvj18x_config(struct pcmcia_device *link) dev_dbg(&link->dev, "fmvj18x_config\n"); + link->io_lines = 5; + len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); kfree(buf); @@ -363,20 +364,20 @@ static int fmvj18x_config(struct pcmcia_device *link) /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; @@ -417,14 +418,14 @@ static int fmvj18x_config(struct pcmcia_device *link) } } - if (link->io.NumPorts2 != 0) { + if (link->resource[1]->end != 0) { ret = mfc_try_io_port(link); if (ret != 0) goto failed; } else if (cardtype == UNGERMANN) { ret = ungermann_try_io_port(link); if (ret != 0) goto failed; } else { - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; } diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index e99abaa..3fd8595 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -151,9 +151,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->priv = info; info->ti = netdev_priv(dev); - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 4; - link->io.IOAddrLines = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 4; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -218,16 +217,17 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_config\n"); link->conf.ConfigIndex = 0x61; + link->io_lines = 16; /* Determine if this is PRIMARY or ALTERNATE. */ /* Try PRIMARY card at 0xA20-0xA23 */ - link->io.BasePort1 = 0xA20; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = 0xA20; + i = pcmcia_request_io(link); if (i != 0) { /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */ - link->io.BasePort1 = 0xA24; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = 0xA24; + ret = pcmcia_request_io(link); if (ret) goto failed; } diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 9980cbb..68f2dee 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -458,9 +458,8 @@ static int nmclan_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&lp->bank_lock); - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -644,7 +643,8 @@ static int nmclan_config(struct pcmcia_device *link) dev_dbg(&link->dev, "nmclan_config\n"); - ret = pcmcia_request_io(link, &link->io); + link->io_lines = 5; + ret = pcmcia_request_io(link); if (ret) goto failed; ret = pcmcia_request_exclusive_irq(link, mace_interrupt); diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index c9cd237..9c5fc9d 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -477,29 +477,31 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) static int try_io_port(struct pcmcia_device *link) { int j, ret; - if (link->io.NumPorts1 == 32) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (link->io.NumPorts2 > 0) { + link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + if (link->resource[0]->end == 32) { + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + if (link->resource[1]->end > 0) { /* for master/slave multifunction cards */ - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } } else { /* This should be two 16-port windows */ - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } - if (link->io.BasePort1 == 0) { - link->io.IOAddrLines = 16; + if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - link->io.BasePort2 = (j ^ 0x300) + 0x10; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + link->resource[1]->start = (j ^ 0x300) + 0x10; + link->io_lines = 16; + ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { - return pcmcia_request_io(link, &link->io); + return pcmcia_request_io(link); } } @@ -520,18 +522,18 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev, network function with window 0, and serial with window 1 */ if (io->nwin > 1) { i = (io->win[1].len > io->win[0].len); - p_dev->io.BasePort2 = io->win[1-i].base; - p_dev->io.NumPorts2 = io->win[1-i].len; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; } else { - i = p_dev->io.NumPorts2 = 0; + i = p_dev->resource[1]->end = 0; } *has_shmem = ((cfg->mem.nwin == 1) && (cfg->mem.win[0].len >= 0x4000)); - p_dev->io.BasePort1 = io->win[i].base; - p_dev->io.NumPorts1 = io->win[i].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); return 0; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 1b0b3230..a5e4779 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -324,9 +324,8 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 4; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -427,12 +426,13 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->io.BasePort2 = cf->io.win[0].base; + p_dev->resource[1]->start = cf->io.win[0].base; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; - p_dev->io.BasePort1 = k ^ 0x300; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = k ^ 0x300; + p_dev->io_lines = 16; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -448,9 +448,8 @@ static int mhz_mfc_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->io.IOAddrLines = 16; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts2 = 8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -601,9 +600,9 @@ static int smc_configcheck(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + return pcmcia_request_io(p_dev); } static int smc_config(struct pcmcia_device *link) @@ -611,7 +610,7 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->io.NumPorts1 = 16; + link->resource[0]->end = 16; i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -646,25 +645,25 @@ static int osi_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->io.NumPorts1 = 64; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts2 = 8; - link->io.IOAddrLines = 16; + link->resource[0]->end = 64; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ link->conf.ConfigIndex = 0x23; + link->io_lines = 16; for (i = j = 0; j < 4; j++) { - link->io.BasePort2 = com[j]; - i = pcmcia_request_io(link, &link->io); + link->resource[1]->start = com[j]; + i = pcmcia_request_io(link); if (i == 0) break; } if (i != 0) { /* Fallback: turn off hard decode */ link->conf.ConfigIndex = 0x03; - link->io.NumPorts2 = 0; - i = pcmcia_request_io(link, &link->io); + link->resource[1]->end = 0; + i = pcmcia_request_io(link); } dev->base_addr = link->resource[0]->start + 0x10; return i; @@ -803,7 +802,7 @@ static int check_sig(struct pcmcia_device *link) } /* Try setting bus width */ - width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO); + width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO); s = inb(ioaddr + CONFIG); if (width) s |= CFG_16BIT; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 034920b..8fb0eb1 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -677,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev, if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = ioaddr; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) return 0; } } @@ -696,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev, int *pass = priv_data; if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = p_dev->io.BasePort2 + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = p_dev->resource[1]->start + (*pass ? (cf->index & 0x20 ? -24:8) : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev, &p_dev->io)) + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -807,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->io.IOAddrLines =10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; if (local->modem) { int pass; @@ -816,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status |= CCSR_AUDIO_ENA; } - link->io.NumPorts2 = 8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->io.NumPorts1 = 16; /* no Mako stuff anymore */ + link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->io.NumPorts1 = 18; + link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for @@ -840,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { - link->io.NumPorts1 = 16; + link->io_lines = 10; + link->resource[0]->end = 16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - link->io.BasePort1 = ioaddr; - if (!(err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = ioaddr; + if (!(err = pcmcia_request_io(link))) goto port_found; } - link->io.BasePort1 = 0; /* let CS decide */ - if ((err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = 0; /* let CS decide */ + if ((err = pcmcia_request_io(link))) goto config_error; } port_found: diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index b7e7f50..d241b4a 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -175,25 +175,23 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; /* diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 65b3aed..3b63216 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -190,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int atmel_config(struct pcmcia_device *link) diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index f71bc78..7c9af82 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -77,10 +77,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) dev->conf.Attributes = CONF_ENABLE_IRQ; dev->conf.IntType = INT_MEMORY_AND_IO; - dev->io.BasePort2 = 0; - dev->io.NumPorts2 = 0; - dev->io.Attributes2 = 0; - win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 4e13ced..ba54d1b 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -519,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev, PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " "dflt->io.nwin=%d\n", cfg->io.nwin, dflt->io.nwin); - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, " - "io.base=0x%04x, len=%d\n", io->flags, - io->win[0].base, io->win[0].len); - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & - CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int prism2_config(struct pcmcia_device *link) diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index be4c475..9c29839 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -801,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; /* Do we need to allocate an interrupt? */ p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -815,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int if_cs_probe(struct pcmcia_device *p_dev) diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 6d514b5..ef46a2d 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -191,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } return 0; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 4f8f55e..873877e 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -253,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } return 0; diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 165beb6..b83d5ef 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -315,9 +315,8 @@ static int ray_probe(struct pcmcia_device *p_dev) local->finder = p_dev; /* The io structure describes IO port mapping. None used here */ - p_dev->io.NumPorts1 = 0; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 0; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a32f220..a1cc2d4 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1884,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev) struct wl3501_card *this; /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -1932,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link) /* Try allocating IO ports. This tries a few fixed addresses. If you * want, you can also read the card's config table to pick addresses -- * see the serial driver for an example. */ + link->io_lines = 5; for (j = 0x280; j < 0x400; j += 0x20) { /* The '^0x300' is so that we probe 0x300-0x3ff first, then * 0x200-0x2ff, and so on, because this seems safer */ - link->io.BasePort1 = j; - link->io.BasePort2 = link->io.BasePort1 + 0x10; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j; + link->resource[1]->start = link->resource[0]->start + 0x10; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index fc1639c..23e50f4 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -101,8 +101,8 @@ static int parport_probe(struct pcmcia_device *link) link->priv = info; info->p_dev = link; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -143,16 +143,16 @@ static int parport_config_check(struct pcmcia_device *p_dev, { if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; if (epp_mode) p_dev->conf.ConfigIndex |= FORCE_EPP_MODE; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin == 2) { - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; return 0; } diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index fcd48da..a48d4a9 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -70,7 +70,8 @@ static int alloc_io_space(struct pcmcia_socket *s, struct resource *res, res->flags |= IORESOURCE_IO; - dev_dbg(&s->dev, "alloc_io_space request for %pR\n", res); + dev_dbg(&s->dev, "alloc_io_space request for %pR, %d lines\n", + res, lines); align = base ? (lines ? 1<resource[0] and *p_dev->resource[1]. The + * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The * "start" value is the requested start of the IO port resource; "end" - * relfects the number of ports requested. - * - * If io_req_t is passed, those values are converted automatically. + * reflects the number of ports requested. The number of IO lines requested + * is specified in &struct pcmcia_device @p_dev->io_lines. */ -int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) +int pcmcia_request_io(struct pcmcia_device *p_dev) { struct pcmcia_socket *s = p_dev->socket; - config_t *c; + config_t *c = p_dev->function_config; int ret = -EINVAL; - unsigned int lines = req->IOAddrLines; mutex_lock(&s->ops_mutex); + dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]); if (!(s->state & SOCKET_PRESENT)) { dev_dbg(&s->dev, "pcmcia_request_io: No card present\n"); goto out; } - c = p_dev->function_config; - if (req) { - c->io[0].start = req->BasePort1; - c->io[0].end = req->NumPorts1; - c->io[0].flags |= req->Attributes1; - c->io[1].start = req->BasePort2; - c->io[1].end = req->NumPorts2; - c->io[1].flags |= req->Attributes2; - } - - dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]); - if (c->state & CONFIG_LOCKED) { dev_dbg(&s->dev, "Configuration is locked\n"); goto out; @@ -582,12 +570,12 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) goto out; } - ret = alloc_io_space(s, &c->io[0], lines); + ret = alloc_io_space(s, &c->io[0], p_dev->io_lines); if (ret) goto out; if (c->io[1].end) { - ret = alloc_io_space(s, &c->io[1], lines); + ret = alloc_io_space(s, &c->io[1], p_dev->io_lines); if (ret) { release_io_space(s, &c->io[0]); goto out; @@ -598,11 +586,6 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) c->state |= CONFIG_IO_REQ; p_dev->_io = 1; - if (!ret) { - req->BasePort1 = c->io[0].start; - req->BasePort2 = c->io[1].start; - } - dev_dbg(&s->dev, "pcmcia_request_io succeeded: %pR , %pR", &c->io[0], &c->io[1]); out: diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 3e040f5..61f49bd 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -100,9 +100,8 @@ static int aha152x_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x20; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 0x20; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -130,15 +129,16 @@ static int aha152x_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { + p_dev->io_lines = 10; /* For New Media T&J, look for a SCSI window */ if (cfg->io.win[0].len >= 0x20) - p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->resource[0]->start = cfg->io.win[0].base; else if ((cfg->io.nwin > 1) && (cfg->io.win[1].len >= 0x20)) - p_dev->io.BasePort1 = cfg->io.win[1].base; + p_dev->resource[0]->start = cfg->io.win[1].base; if ((cfg->io.nwin > 0) && - (p_dev->io.BasePort1 < 0xffff)) { - if (!pcmcia_request_io(p_dev, &p_dev->io)) + (p_dev->resource[0]->start < 0xffff)) { + if (!pcmcia_request_io(p_dev)) return 0; } return -EINVAL; diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 49a9a0a..13dbe5c 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -83,9 +83,8 @@ static int fdomain_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 0x10; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -112,8 +111,9 @@ static int fdomain_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + return pcmcia_request_io(p_dev); } diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index d929891..8bb598b 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1558,9 +1558,8 @@ static int nsp_cs_probe(struct pcmcia_device *link) nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; /* not used */ + link->resource[0]->end = 0x10; + link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; @@ -1641,24 +1640,23 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = + p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 4e2b83f..eb775f1 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -156,9 +156,8 @@ static int qlogic_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -185,13 +184,14 @@ static int qlogic_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int qlogic_config(struct pcmcia_device * link) diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index d99c0cb..321e390 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -690,13 +690,14 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int @@ -858,9 +859,8 @@ SYM53C500_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index fe7adcd..141c695 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -335,8 +335,8 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; if (do_sound) { link->conf.Attributes |= CONF_ENABLE_SPKR; @@ -424,12 +424,13 @@ static int simple_config_check(struct pcmcia_device *p_dev, p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->io_lines = ((*try & 0x1) == 0) ? + 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) && (cf->io.win[0].base != 0)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } return -EINVAL; @@ -446,9 +447,9 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev, if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { for (j = 0; j < 5; j++) { - p_dev->io.BasePort1 = base[j]; - p_dev->io.IOAddrLines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) return 0; } } @@ -521,9 +522,9 @@ static int multi_config_check(struct pcmcia_device *p_dev, /* The quad port cards have bad CIS's, so just look for a window larger than 8 ports and assume it will be right */ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) { + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev)) { *base2 = p_dev->resource[0]->start + 8; return 0; } @@ -540,10 +541,10 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev, int *base2 = priv_data; if (cf->io.nwin == 2) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.BasePort2 = cf->io.win[1].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) { + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[1]->start = cf->io.win[1].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev)) { *base2 = p_dev->resource[1]->start; return 0; } @@ -557,10 +558,10 @@ static int multi_config(struct pcmcia_device *link) int i, base2 = 0; /* First, look for a generic full-sized window */ - link->io.NumPorts1 = info->multi * 8; + link->resource[0]->end = info->multi * 8; if (pcmcia_loop_config(link, multi_config_check, &base2)) { /* If that didn't work, look for two windows */ - link->io.NumPorts1 = link->io.NumPorts2 = 8; + link->resource[0]->end = link->resource[1]->end = 8; info->multi = 2; if (pcmcia_loop_config(link, multi_config_check_notpicky, &base2)) { diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 208f1b7..7cf0ccb 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -736,24 +736,22 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } return 0; diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index c4cfcff..9ee677f 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -224,24 +224,23 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } return 0; } diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 6d56957..7e41ad9 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -571,24 +571,22 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 29e1daf..b2483f8 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -323,24 +323,22 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index fb10987..c1444b4 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -301,24 +301,22 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index f37dc22..d50b6c4 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -264,8 +264,8 @@ static const dev_info_t dev_info = "ni_mio_cs"; static int cs_attach(struct pcmcia_device *link) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -310,13 +310,12 @@ static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, { int base, ret; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; for (base = 0x000; base < 0x400; base += 0x20) { - p_dev->io.BasePort1 = base; - ret = pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = base; + ret = pcmcia_request_io(p_dev); if (!ret) return 0; } diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index 80b8d57..25f4e67 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -1102,26 +1102,24 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static void daqp_cs_config(struct pcmcia_device *link) diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 23615378..f15afd2 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -145,9 +145,8 @@ static int wl_adapter_attach(struct pcmcia_device *link) return -ENOMEM; } - link->io.NumPorts1 = HCF_NUM_IO_PORTS; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - link->io.IOAddrLines = 6; + link->resource[0]->end = HCF_NUM_IO_PORTS; + link->resource[0]->flags = IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 5; @@ -305,8 +304,9 @@ void wl_adapter_insert( struct pcmcia_device *link ) /* Do we need to allocate an interrupt? */ link->conf.Attributes |= CONF_ENABLE_IRQ; + link->io_lines = 6; - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret != 0) goto failed; diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index a801036..a1900e5 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -32,9 +32,8 @@ static int ixj_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "ixj_attach()\n"); /* Create new ixj device */ - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 3; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL); if (!p_dev->priv) { @@ -120,13 +119,14 @@ static int ixj_config_check(struct pcmcia_device *p_dev, { if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; + p_dev->io_lines = 3; if (io->nwin == 2) { - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } - if (!pcmcia_request_io(p_dev, &p_dev->io)) + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 22e04f2..0e13a00 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -162,16 +162,16 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } pcmcia_disable_device(p_dev); return -ENODEV; diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index 0cd8c70..ad71bb5 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -56,23 +56,6 @@ typedef struct config_req_t { #define INT_CARDBUS 0x04 #define INT_ZOOMED_VIDEO 0x08 -/* For RequestIO and ReleaseIO */ -typedef struct io_req_t { - u_int BasePort1; - u_int NumPorts1; - u_int Attributes1; - u_int BasePort2; - u_int NumPorts2; - u_int Attributes2; - u_int IOAddrLines; -} io_req_t; - -/* Attributes for RequestIO and ReleaseIO */ -#define IO_DATA_PATH_WIDTH 0x18 -#define IO_DATA_PATH_WIDTH_8 0x00 -#define IO_DATA_PATH_WIDTH_16 0x08 -#define IO_DATA_PATH_WIDTH_AUTO 0x10 - /* Bits in IRQInfo1 field */ #define IRQ_NMI_ID 0x01 #define IRQ_IOCK_ID 0x02 diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 3dafd7d..0748bec 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -80,7 +80,6 @@ struct pcmcia_device { struct list_head socket_device_list; /* deprecated, will be cleaned up soon */ - io_req_t io; config_req_t conf; window_handle_t win; @@ -88,6 +87,8 @@ struct pcmcia_device { unsigned int irq; struct resource *resource[MAX_IO_WIN]; + unsigned int io_lines; /* number of I/O lines */ + /* Is the device suspended? */ u16 suspended:1; @@ -179,7 +180,7 @@ int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val); int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val); /* device configuration */ -int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req); +int pcmcia_request_io(struct pcmcia_device *p_dev); int __must_check __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, @@ -206,6 +207,22 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win, int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod); void pcmcia_disable_device(struct pcmcia_device *p_dev); +/* IO ports */ +#define IO_DATA_PATH_WIDTH 0x18 +#define IO_DATA_PATH_WIDTH_8 0x00 +#define IO_DATA_PATH_WIDTH_16 0x08 +#define IO_DATA_PATH_WIDTH_AUTO 0x10 + +/* convert flag found in cfgtable to data path width parameter */ +static inline int pcmcia_io_cfg_data_width(unsigned int flags) +{ + if (!(flags & CISTPL_IO_8BIT)) + return IO_DATA_PATH_WIDTH_16; + if (!(flags & CISTPL_IO_16BIT)) + return IO_DATA_PATH_WIDTH_8; + return IO_DATA_PATH_WIDTH_AUTO; +} + #endif /* __KERNEL__ */ #endif /* _LINUX_DS_H */ diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 9f897bc..7ab9174 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -139,8 +139,8 @@ static int snd_pdacf_probe(struct pcmcia_device *link) pdacf->p_dev = link; link->priv = pdacf; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -219,7 +219,7 @@ static int pdacf_config(struct pcmcia_device *link) snd_printdd(KERN_DEBUG "pdacf_config called\n"); link->conf.ConfigIndex = 0x5; - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index f23c235..a6edfc3 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -159,8 +159,8 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl, vxp->p_dev = link; link->priv = chip; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -226,7 +226,7 @@ static int vxpocket_config(struct pcmcia_device *link) strcpy(chip->card->driver, vxp440_hw.name); } - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; -- cgit v0.10.2